Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc drivers updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystems for
  6.4-rc1.

  It's pretty big, but due to the removal of pcmcia drivers, almost
  breaks even for number of lines added vs. removed, a nice change.

  Included in here are:

   - removal of unused PCMCIA drivers (finally!)

   - Interconnect driver updates and additions

   - Lots of IIO driver updates and additions

   - MHI driver updates

   - Coresight driver updates

   - NVMEM driver updates, which required some OF updates

   - W1 driver updates and a new maintainer to manage the subsystem

   - FPGA driver updates

   - New driver subsystem, CDX, for AMD systems

   - lots of other small driver updates and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits)
  mcb-lpc: Reallocate memory region to avoid memory overlapping
  mcb-pci: Reallocate memory region to avoid memory overlapping
  mcb: Return actual parsed size when reading chameleon table
  kernel/configs: Drop Android config fragments
  virt: acrn: Replace obsolete memalign() with posix_memalign()
  spmi: Add a check for remove callback when removing a SPMI driver
  spmi: fix W=1 kernel-doc warnings
  spmi: mtk-pmif: Drop of_match_ptr for ID table
  spmi: pmic-arb: Convert to platform remove callback returning void
  spmi: mtk-pmif: Convert to platform remove callback returning void
  spmi: hisi-spmi-controller: Convert to platform remove callback returning void
  w1: gpio: remove unnecessary ENOMEM messages
  w1: omap-hdq: remove unnecessary ENOMEM messages
  w1: omap-hdq: add SPDX tag
  w1: omap-hdq: allow compile testing
  w1: matrox: remove unnecessary ENOMEM messages
  w1: matrox: use inline over __inline__
  w1: matrox: switch from asm to linux header
  w1: ds2482: do not use assignment in if condition
  w1: ds2482: drop unnecessary header
  ...

4 files changed, 152 insertions, 9 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx
new file mode 100644
index 000000000000..7af477f49998
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-cdx
@@ -0,0 +1,56 @@
+What:		/sys/bus/cdx/rescan
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Writing y/1/on to this file will cause rescan of the bus
+		and devices on the CDX bus. Any new devices are scanned and
+		added to the list of Linux devices and any devices removed are
+		also deleted from Linux.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/rescan
+
+What:		/sys/bus/cdx/devices/.../vendor
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Vendor ID for this CDX device, in hexadecimal. Vendor ID is
+		16 bit identifier which is specific to the device manufacturer.
+		Combination of Vendor ID and Device ID identifies a device.
+
+What:		/sys/bus/cdx/devices/.../device
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Device ID for this CDX device, in hexadecimal. Device ID is
+		16 bit identifier to identify a device type within the range
+		of a device manufacturer.
+		Combination of Vendor ID and Device ID identifies a device.
+
+What:		/sys/bus/cdx/devices/.../reset
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Writing y/1/on to this file resets the CDX device.
+		On resetting the device, the corresponding driver is notified
+		twice, once before the device is being reset, and again after
+		the reset has been complete.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/.../reset
+
+What:		/sys/bus/cdx/devices/.../remove
+Date:		March 2023
+Contact:	tarak.reddy@amd.com
+Description:
+		Writing y/1/on to this file removes the corresponding
+		device from the CDX bus. If the device is to be reconfigured
+		reconfigured in the Hardware, the device can be removed, so
+		that the device driver does not access the device while it is
+		being reconfigured.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/devices/.../remove
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 6ba34c0d9789..7140e8e7313f 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1807,8 +1807,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) resistance reading that can be processed
-		into an ohm value.
+		Raw (unscaled no offset etc.) resistance reading.
+		Units after application of scale and offset are ohms.
 
 What:		/sys/bus/iio/devices/iio:deviceX/heater_enable
 KernelVersion:	4.1.0
@@ -1894,8 +1894,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw
 KernelVersion:	4.8
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) electric conductivity reading that
-		can be processed to siemens per meter.
+		Raw (unscaled no offset etc.) electric conductivity reading.
+		Units after application of scale and offset are siemens per
+		meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
 KernelVersion:	4.10
@@ -1951,8 +1952,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_phaseY_raw
 KernelVersion:	4.18
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled) phase difference reading from channel Y
-		that can be processed to radians.
+		Raw (unscaled) phase difference reading from channel Y.
+		Units after application of scale and offset are radians.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input
 What:		/sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
index ca93c215ef99..fead760dcf77 100644
--- a/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
+++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
@@ -234,8 +234,8 @@ Description:
 		For details, see section `5.10 RAS Internal Error Register Definitions,
 		Altra Family Soc BMC Interface Specification`.
 
-What:		/sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot]
-KernelVersion:	6.1
+What:		/sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot|dimm_2x_refresh]
+KernelVersion:	6.1 (event_[vrd_warn_fault|vrd_hot|dimm_hot]), 6.4 (event_dimm_2x_refresh)
 Contact:	Quan Nguyen <quan@os.amperecomputing.com>
 Description:
 		(RO) Contains the detail information in case of VRD/DIMM warning/hot events
@@ -258,8 +258,21 @@ Description:
 		+---------------+---------------------------------------------------------------+---------------------+
 		| DIMM HOT      | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_hot       | DIMM Hot            |
 		+---------------+---------------------------------------------------------------+---------------------+
+		| DIMM 2X       | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_2x_refresh| DIMM 2x refresh rate|
+		| REFRESH RATE  |                                                               | event in high temp  |
+		+---------------+---------------------------------------------------------------+---------------------+
+
+		For more details, see section `5.7 GPI Status Registers and 5.9 Memory Error Register Definitions,
+		Altra Family Soc BMC Interface Specification`.
+
+What:		/sys/bus/platform/devices/smpro-errmon.*/event_dimm[0-15]_syndrome
+KernelVersion:	6.4
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) The sysfs returns the 2-byte DIMM failure syndrome data for slot
+		0-15 if it failed to initialize.
 
-		For more details, see section `5.7 GPI Status Registers,
+		For more details, see section `5.11 Boot Stage Register Definitions,
 		Altra Family Soc BMC Interface Specification`.
 
 What:		/sys/bus/platform/devices/smpro-misc.*/boot_progress
diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
new file mode 100644
index 000000000000..8f93d27b6d91
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
@@ -0,0 +1,73 @@
+What:		/sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
+Date:		February 2023
+KernelVersion:	6.4
+Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
+Description:	(RO) Read fpga status.
+		Read returns a hexadecimal value that tells the current status
+		of the FPGA device. Each bit position in the status value is
+		described Below(see ug570 chapter 9).
+		https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration
+
+		======================  ==============================================
+		BIT(0)			0: No CRC error
+					1: CRC error
+
+		BIT(1)			0: Decryptor security not set
+					1: Decryptor security set
+
+		BIT(2)			0: MMCMs/PLLs are not locked
+					1: MMCMs/PLLs are locked
+
+		BIT(3)			0: DCI not matched
+					1: DCI matched
+
+		BIT(4)			0: Start-up sequence has not finished
+					1: Start-up sequence has finished
+
+		BIT(5)			0: All I/Os are placed in High-Z state
+					1: All I/Os behave as configured
+
+		BIT(6)			0: Flip-flops and block RAM are write disabled
+					1: Flip-flops and block RAM are write enabled
+
+		BIT(7)			0: GHIGH_B_STATUS asserted
+					1: GHIGH_B_STATUS deasserted
+
+		BIT(8) to BIT(10)	Status of the mode pins
+
+		BIT(11)			0: Initialization has not finished
+					1: Initialization finished
+
+		BIT(12)			Value on INIT_B_PIN pin
+
+		BIT(13)			0: Signal not released
+					1: Signal released
+
+		BIT(14)			Value on DONE_PIN pin.
+
+		BIT(15)			0: No IDCODE_ERROR
+					1: IDCODE_ERROR
+
+		BIT(16)			0: No SECURITY_ERROR
+					1: SECURITY_ERROR
+
+		BIT(17)			System Monitor over-temperature if set
+
+		BIT(18) to BIT(20)	Start-up state machine (0 to 7)
+					Phase 0 = 000
+					Phase 1 = 001
+					Phase 2 = 011
+					Phase 3 = 010
+					Phase 4 = 110
+					Phase 5 = 111
+					Phase 6 = 101
+					Phase 7 = 100
+
+		BIT(25) to BIT(26)	Indicates the detected bus width
+					00 = x1
+					01 = x8
+					10 = x16
+					11 = x32
+		======================  ==============================================
+
+		The other bits are reserved.