Merge tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.

 - Allow per-process DEXCR (Dynamic Execution Control Register) settings
   via prctl, notably NPHIE which controls hashst/hashchk for ROP
   protection.

 - Install powerpc selftests in sub-directories. Note this changes the
   way run_kselftest.sh needs to be invoked for powerpc selftests.

 - Change fadump (Firmware Assisted Dump) to better handle memory
   add/remove.

 - Add support for passing additional parameters to the fadump kernel.

 - Add support for updating the kdump image on CPU/memory add/remove
   events.

 - Other small features, cleanups and fixes.

Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.

* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
  powerpc/fadump: Fix section mismatch warning
  powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
  powerpc/fadump: update documentation about bootargs_append
  powerpc/fadump: pass additional parameters when fadump is active
  powerpc/fadump: setup additional parameters for dump capture kernel
  powerpc/pseries/fadump: add support for multiple boot memory regions
  selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
  KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
  KVM: PPC: Fix documentation for ppc mmu caps
  KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
  KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
  powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
  powerpc/code-patching: Use dedicated memory routines for patching
  powerpc/code-patching: Test patch_instructions() during boot
  powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
  powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
  powerpc: Fix typos
  powerpc/eeh: Fix spelling of the word "auxillary" and update comment
  macintosh/ams: Fix unused variable warning
  powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
  ...

6 files changed, 36 insertions, 18 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 710d47be11e0..e7e160954e79 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -423,7 +423,7 @@ What:		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
 		/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
 Date:		March 2016
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		attributes
 
@@ -473,7 +473,7 @@ What:		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats
 		/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
 Date:		March 2016
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		attributes
 
@@ -608,7 +608,7 @@ Description:	Umwait control
 What:		/sys/devices/system/cpu/svm
 Date:		August 2019
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
-		Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+		Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Secure Virtual Machine
 
 		If 1, it means the system is using the Protected Execution
@@ -617,7 +617,7 @@ Description:	Secure Virtual Machine
 
 What:		/sys/devices/system/cpu/cpuX/purr
 Date:		Apr 2005
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PURR ticks for this CPU since the system boot.
 
 		The Processor Utilization Resources Register (PURR) is
@@ -628,7 +628,7 @@ Description:	PURR ticks for this CPU since the system boot.
 
 What: 		/sys/devices/system/cpu/cpuX/spurr
 Date:		Dec 2006
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	SPURR ticks for this CPU since the system boot.
 
 		The Scaled Processor Utilization Resources Register
@@ -640,7 +640,7 @@ Description:	SPURR ticks for this CPU since the system boot.
 
 What: 		/sys/devices/system/cpu/cpuX/idle_purr
 Date:		Apr 2020
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PURR ticks for cpuX when it was idle.
 
 		This sysfs interface exposes the number of PURR ticks
@@ -648,7 +648,7 @@ Description:	PURR ticks for cpuX when it was idle.
 
 What: 		/sys/devices/system/cpu/cpuX/idle_spurr
 Date:		Apr 2020
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	SPURR ticks for cpuX when it was idle.
 
 		This sysfs interface exposes the number of SPURR ticks
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-powercap b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
index c9b66ec4f165..d2d12ee89288 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-powercap
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-powercap
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/powercap
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Powercap directory for Powernv (P8, P9) servers
 
 		Each folder in this directory contains a
@@ -11,7 +11,7 @@ What:		/sys/firmware/opal/powercap/system-powercap
 		/sys/firmware/opal/powercap/system-powercap/powercap-max
 		/sys/firmware/opal/powercap/system-powercap/powercap-current
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	System powercap directory and attributes applicable for
 		Powernv (P8, P9) servers
 
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-psr b/Documentation/ABI/testing/sysfs-firmware-opal-psr
index cc2ece70e365..1e55b56a0f89 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-psr
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-psr
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/psr
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Power-Shift-Ratio directory for Powernv P9 servers
 
 		Power-Shift-Ratio allows to provide hints the firmware
@@ -10,7 +10,7 @@ Description:	Power-Shift-Ratio directory for Powernv P9 servers
 
 What:		/sys/firmware/opal/psr/cpu_to_gpu_X
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	PSR sysfs attributes for Powernv P9 servers
 
 		Power-Shift-Ratio between CPU and GPU for a given chip
diff --git a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
index 3a2dfe542e8c..fcb1fb4795b6 100644
--- a/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
+++ b/Documentation/ABI/testing/sysfs-firmware-opal-sensor-groups
@@ -1,6 +1,6 @@
 What:		/sys/firmware/opal/sensor_groups
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Sensor groups directory for POWER9 powernv servers
 
 		Each folder in this directory contains a sensor group
@@ -11,7 +11,7 @@ Description:	Sensor groups directory for POWER9 powernv servers
 
 What:		/sys/firmware/opal/sensor_groups/<sensor_group_name>/clear
 Date:		August 2017
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Sysfs file to clear the min-max of all the sensors
 		belonging to the group.
 
diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
index 141a6b371469..f5cefb81ac9d 100644
--- a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
+++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
@@ -1,6 +1,6 @@
 What:		/sys/firmware/papr/energy_scale_info
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Directory hosting a set of platform attributes like
 		energy/frequency on Linux running as a PAPR guest.
 
@@ -10,20 +10,20 @@ Description:	Directory hosting a set of platform attributes like
 
 What:		/sys/firmware/papr/energy_scale_info/<id>
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Energy, frequency attributes directory for POWERVM servers
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/desc
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	String description of the energy attribute of <id>
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/value
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	Numeric value of the energy attribute of <id>
 
 What:		/sys/firmware/papr/energy_scale_info/<id>/value_desc
 Date:		February 2022
-Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@lists.ozlabs.org>
 Description:	String value of the energy attribute of <id>
diff --git a/Documentation/ABI/testing/sysfs-kernel-fadump b/Documentation/ABI/testing/sysfs-kernel-fadump
index 8f7a64a81783..2f9daa7ca55b 100644
--- a/Documentation/ABI/testing/sysfs-kernel-fadump
+++ b/Documentation/ABI/testing/sysfs-kernel-fadump
@@ -38,3 +38,21 @@ Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read only
 		Provide information about the amount of memory reserved by
 		FADump to save the crash dump in bytes.
+
+What:		/sys/kernel/fadump/hotplug_ready
+Date:		Apr 2024
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read only
+		Kdump udev rule re-registers fadump on memory add/remove events,
+		primarily to update the elfcorehdr. This sysfs indicates the
+		kdump udev rule that fadump re-registration is not required on
+		memory add/remove events because elfcorehdr is now prepared in
+		the second/fadump kernel.
+User:		kexec-tools
+
+What:		/sys/kernel/fadump/bootargs_append
+Date:		May 2024
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		This is a special sysfs file available to setup additional
+		parameters to be passed to capture kernel.