diff options
| author |  Cosmin Tanislav <cosmin.tanislav@analog.com>
| 2022-11-03 15:00:30 +0200 |
|---|---|---|
| committer |  Jonathan Cameron <Jonathan.Cameron@huawei.com>
| 2022-11-23 19:53:59 +0000 |
| commit | 4ecee36077698bc5c759571106cd29321a886735 (patch) | |
| tree | bbdea8070b2c94109876bb04c9f1da0bef8634ff /Documentation/devicetree/bindings/iio | |
| parent | iio: temperature: ltc2983: make bulk write buffer DMA-safe (diff) | |
| download | linux-4ecee36077698bc5c759571106cd29321a886735.tar.gz linux-4ecee36077698bc5c759571106cd29321a886735.tar.bz2 linux-4ecee36077698bc5c759571106cd29321a886735.zip | |
dt-bindings: iio: temperature: ltc2983: add default values
Binding properties should have default values to let the reader
know if they should change it. Add them based on driver logic.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-3-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 722781aa4697..82667adc85b1 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -34,6 +34,7 @@ properties: cases. An extra delay can be configured using this property. The value is rounded to nearest 100us. maximum: 255 + default: 0 adi,filter-notch-freq: description: @@ -45,6 +46,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2 + default: 0 '#address-cells': const: 1 @@ -104,6 +106,7 @@ patternProperties: This property set's the pulsed current value applied during open-circuit detect. enum: [10, 100, 500, 1000] + default: 10 adi,cold-junction-handle: description: @@ -163,6 +166,7 @@ patternProperties: cycles, this property will assume different predefined values on each cycle. Just set the value of the first cycle (1l). enum: [10, 20, 40, 80] + default: 10 adi,ideal-factor-value: description: @@ -170,6 +174,7 @@ patternProperties: be multiplied by 1000000 to remove the fractional part. For more information look at table 20 of the datasheet. $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 "^rtd@": type: object @@ -207,6 +212,7 @@ patternProperties: property to 5 means 4 wires with Kelvin Rsense. $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 3, 4, 5] + default: 2 adi,rsense-share: description: @@ -226,6 +232,7 @@ patternProperties: This property controls the magnitude of the excitation current applied to the RTD. enum: [5, 10, 25, 50, 100, 250, 500, 1000] + default: 5 adi,rtd-curve: description: @@ -234,6 +241,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 + default: 0 adi,custom-rtd: description: @@ -308,6 +316,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, 500000, 1000000] + default: 0 adi,custom-thermistor: description: |