Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC DT updates from Arnd Bergmann:
 "About a quarter of the changes are for 32-bit arm, mostly filling in
  device support for existing machines and adding minor cleanups, mostly
  for Qualcomm and Samsung based machines.

  Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
  Rockchips that have been around for a while but were lacking kernel
  support so far: RV1126 is a Vision SoC with an NPU and is used in the
  Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
  for TV boxes and so far only comes with a dts for its refernece
  design.

  The other 32-bit boards that were added are two ASpeed AST2600 based
  BMC boards, the Microchip sam9x60_curiosity development board (Armv5
  based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
  for i.MX53 and i.MX6ULL.

  On the RISC-V side, there are fewer patches, but a total of ten new
  single-board computers based on variations of the Allwinner D1/T113
  chip, plus one more board based on Microchip Polarfire.

  As usual, arm64 has by far the most changes here, with over 700
  non-merge changesets, among them over 400 alone for Qualcomm. The
  newly added SoCs this time are all recent high-end embedded SoCs for
  various markets, each on comes with support for its reference board:

   - Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
   - Qualcomm QDU1000/QRU1000 5G RAN platform
   - Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
   - TI J784S4 for industrial and automotive applications

  In total, there are 46 new arm64 machines:
   - Reference platforms for each of the five new SoCs
   - Three Amlogic based development boards
   - Six embedded machines based on NXP i.MX8MM and i.MX8MP
   - The Mediatek mt7986a based Banana Pi R3 router
   - Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
     (Snapdragon 662) and SM8250 (Snapdragon 865)
   - Two LTE dongles, also based on MSM8916
   - Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
     SDM450 and SDM632
   - Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
   - Nine development boards based on Rockchips RK3588, RK3568, RK3566
     and RK3328.
   - Five development machines based on TI K3 (AM642/AM654/AM68/AM69)

  The cleanup of dtc warnings continues across all platforms, adding to
  the total number of changes"

* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
  dt-bindings: riscv: correct starfive visionfive 2 compatibles
  ARM: dts: socfpga: Add enclustra PE1 devicetree
  dt-bindings: altera: Add enclustra mercury PE1
  arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
  arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
  arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
  arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
  arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
  arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
  arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
  arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
  arm64: dts: qcom: pmk8350: Use the correct PON compatible
  arm64: dts: qcom: sc8280xp-x13s: Enable external display
  arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
  arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
  arm64: dts: qcom: sm8350-hdk: enable GPU
  arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
  arm64: dts: qcom: sm8350: finish reordering nodes
  arm64: dts: qcom: sm8350: move more nodes to correct place
  arm64: dts: qcom: sm8350: reorder device nodes
  ...

2 files changed, 209 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
new file mode 100644
index 000000000000..0070b0396e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-clk-virt
+      - qcom,qdu1000-gem-noc
+      - qcom,qdu1000-mc-virt
+      - qcom,qdu1000-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-clk-virt
+              - qcom,qdu1000-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,qdu1000-system-noc";
+        reg = <0x1640000 0x45080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qdu1000-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
new file mode 100644
index 000000000000..716bd21f6041
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8550-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8550
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-aggre1-noc
+      - qcom,sm8550-aggre2-noc
+      - qcom,sm8550-clk-virt
+      - qcom,sm8550-cnoc-main
+      - qcom,sm8550-config-noc
+      - qcom,sm8550-gem-noc
+      - qcom,sm8550-lpass-ag-noc
+      - qcom,sm8550-lpass-lpiaon-noc
+      - qcom,sm8550-lpass-lpicx-noc
+      - qcom,sm8550-mc-virt
+      - qcom,sm8550-mmss-noc
+      - qcom,sm8550-nsp-noc
+      - qcom,sm8550-pcie-anoc
+      - qcom,sm8550-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-clk-virt
+              - qcom,sm8550-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+              - qcom,sm8550-aggre2-noc
+              - qcom,sm8550-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8550-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8550-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };