Merge tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Generic interrupt and irqchips subsystem updates. Unusually, there is
  not a single completely new irq chip driver, just new DT bindings and
  extensions of existing drivers to accomodate new variants!

  Core:

   - Consolidation and robustness changes for irq time accounting

   - Cleanup and consolidation of irq stats

   - Remove the fasteoi IPI flow which has been proved useless

   - Provide an interface for converting legacy interrupt mechanism into
     irqdomains

  Drivers:

   - Preliminary support for managed interrupts on platform devices

   - Correctly identify allocation of MSIs proxyied by another device

   - Generalise the Ocelot support to new SoCs

   - Improve GICv4.1 vcpu entry, matching the corresponding KVM
     optimisation

   - Work around spurious interrupts on Qualcomm PDC

   - Random fixes and cleanups"

* tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling
  driver core: platform: Add devm_platform_get_irqs_affinity()
  ACPI: Drop acpi_dev_irqresource_disabled()
  resource: Add irqresource_disabled()
  genirq/affinity: Add irq_update_affinity_desc()
  irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge
  irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device
  platform-msi: Track shared domain allocation
  irqchip/ti-sci-intr: Fix freeing of irqs
  irqchip/ti-sci-inta: Fix printing of inta id on probe success
  drivers/irqchip: Remove EZChip NPS interrupt controller
  Revert "genirq: Add fasteoi IPI flow"
  irqchip/hip04: Make IPIs use handle_percpu_devid_irq()
  irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()
  irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq()
  irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq()
  irqchip/ocelot: Add support for Jaguar2 platforms
  irqchip/ocelot: Add support for Serval platforms
  irqchip/ocelot: Add support for Luton platforms
  irqchip/ocelot: prepare to support more SoC
  ...

3 files changed, 70 insertions, 23 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad7801e8cf..4d47df1a5c91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@
 * Freescale Layerscape external IRQs
 
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@ Supplemental Configuration Unit (SCFG).
 
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
   interrupts.
 - interrupt-map-mask: Must be <0xffffffff 0>.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
deleted file mode 100644
index f5baeccb689f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Microsemi Ocelot SoC ICPU Interrupt Controller
-
-Required properties:
-
-- compatible : should be "mscc,ocelot-icpu-intr"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-		intc: interrupt-controller@70000070 {
-			compatible = "mscc,ocelot-icpu-intr";
-			reg = <0x70000070 0x70>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
new file mode 100644
index 000000000000..27b798bfe29b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Microsemi Ocelot SoC ICPU Interrupt Controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  the Microsemi Ocelot interrupt controller that is part of the
+  ICPU. It is connected directly to the MIPS core interrupt
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mscc,jaguar2-icpu-intr
+          - mscc,luton-icpu-intr
+          - mscc,ocelot-icpu-intr
+          - mscc,serval-icpu-intr
+
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@70000070 {
+        compatible = "mscc,ocelot-icpu-intr";
+        reg = <0x70000070 0x70>;
+        #interrupt-cells = <1>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupt-parent = <&cpuintc>;
+        interrupts = <2>;
+    };
+...