Merge tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Infineon XDP710

   - EC Chip driver for Lenovo ThinkStation motherboards

   - Analog Devices ADP1050

  Improved support for existing drivers:

   - emc1403: Convert to with_info API; Support for EMC1428 and EMC1438

   - nzxt-kraken3: Support for NZXT Kraken 2023

   - aquacomputer_d5next: Support for Octo flow sensors

   - pmbus/adm1275: Support for ADM1281

   - dell-smm: Supportt for Precision 7540 and G5 5505

  Other notable cleanup:

   - max6639: Use regmap

   - Remove unused structure fields from multiple drivers

   - Drop explicit initialization of struct i2c_device_id::driver_data
     to zero

   - Improve configuration mode handling in it87 driver

   - jc42: Drop support for I2C_CLASS_SPD

   - Various conversions to devicetree schema

   - Add HAS_IOPORT dependencies as needed

  Minor fixes and improvements to max31790, coretemp, aspeed-g6-pwm-tach,
  pwm-fan, pmbus/mp2975, acpi_power_meter, and lm70 drivers"

* tag 'hwmon-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (52 commits)
  hwmon: (nzxt-kraken3) Bail out for unsupported device variants
  hwmon: (emc1403) Add support for EMC1428 and EMC1438.
  hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0 (part 2)
  hwmon: (emc1403) Add support for conversion interval configuration
  hwmon: (emc1403) Support 11 bit accuracy
  hwmon: (emc1403) Convert to with_info API
  hwmon: (max6639) Use regmap
  hwmon: (npcm750-pwm-fan) Remove another unused field in struct npcm7xx_cooling_device
  hwmon: (npcm750-pwm-fan) Remove an unused field in struct npcm7xx_cooling_device
  hwmon: (stts751) Remove an unused field in struct stts751_priv
  hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  hwmon: (max31790) revise the scale to write pwm
  hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) models
  hwmon: (nzxt-kraken3) Decouple device names from kinds
  hwmon: (it87) Remove tests nolonger required
  hwmon: (it87) Test for chipset before entering configuration mode
  hwmon: (it87) Do not enter configuration mode for some chiptypes
  hwmon: (it87) Rename FEAT_CONF_NOEXIT to FEAT_NOCONF as more descriptive of requirement
  hwmon: (pmbus) Add support for Infineon XDP710
  dt-bindings: hwmon: Add infineon xdp710 driver bindings
  ...

17 files changed, 368 insertions, 172 deletions

diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7bac3..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0:  7 single-ended voltage readings (IN0-IN6),
-            1 temperature reading (internal)
- - Mode 1:  8 single-ended voltage readings (IN0-IN7),
-            no temperature
- - Mode 2:  4 pseudo-differential voltage readings
-              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
- - Mode 3:  4 single-ended voltage readings (IN0-IN3),
-            2 pseudo-differential voltage readings
-              (IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible:  must be set to "ti,adc128d818"
- - reg:         I2C address of the device
-
-Optional node properties:
-
- - ti,mode:     Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
-	adc128d818@1d {
-		compatible = "ti,adc128d818";
-		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index b68061294964..5b076d677395 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
@@ -27,6 +27,7 @@ properties:
       - adi,adm1275
       - adi,adm1276
       - adi,adm1278
+      - adi,adm1281
       - adi,adm1293
       - adi,adm1294
 
@@ -91,6 +92,7 @@ allOf:
           contains:
             enum:
               - adi,adm1278
+              - adi,adm1281
               - adi,adm1293
               - adi,adm1294
     then:
diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt
deleted file mode 100644
index d102fe765124..000000000000
--- a/Documentation/devicetree/bindings/hwmon/as370.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Synaptics AS370 PVT sensors
-
-Required properties:
-- compatible : "syna,as370-hwmon"
-- reg        : address and length of the register set.
-
-Example:
-	hwmon@ea0810 {
-		compatible = "syna,as370-hwmon";
-		reg = <0xea0810 0xc>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
new file mode 100644
index 000000000000..376ee7f1cdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ibm,opal-sensor-cooling-fan
+      - ibm,opal-sensor-amb-temp
+      - ibm,opal-sensor-power-supply
+      - ibm,opal-sensor-power
+
+  sensor-id:
+    description:
+      An opaque id provided by the firmware to the kernel, identifies a
+      given sensor and its attribute data.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - sensor-id
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "ibm,opal-sensor-cooling-fan";
+        sensor-id = <0x7052107>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e2573d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>;			: I2C bus address
-
-Examples:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <100000>;
-        < more properties >
-
-        occ-hwmon@1 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x50>;
-        };
-
-        occ-hwmon@2 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x51>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242be60a1..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
-		"ibm,opal-sensor-cooling-fan"
-		"ibm,opal-sensor-amb-temp"
-		"ibm,opal-sensor-power-supply"
-		"ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
-	     given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
-	sensor-id = <0x7052107>;
-	compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
-	sensor-id = <0x5096000>;
-	compatible = "ibm,opal-sensor-amb-temp";
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d8e284..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
-			12000000 uV.
-- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
-			allow more fine-grained control of slower fans.
-			Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
-			driver selects closed-loop mode and the requested speed.
-			This ensures the fan is already running before userspace
-			takes over.
-
-Example:
-	fan-max6650: max6650@1b {
-		reg = <0x1b>;
-		compatible = "maxim,max6650";
-		maxim,fan-microvolt = <12000000>;
-		maxim,fan-prescale = <4>;
-		maxim,fan-target-rpm = <1200>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 000000000000..2c26104a5e16
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The MAX6650 and MAX6651 regulate and monitor the speed
+  of 5VDC/12VDC burshless fans with built-in tachometers.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6650
+      - maxim,max6651
+
+  reg:
+    maxItems: 1
+
+  maxim,fan-microvolt:
+    description:
+      The supply voltage of the fan, either 5000000 uV or
+      12000000 uV.
+    enum: [5000000, 12000000]
+
+  maxim,fan-prescale:
+    description:
+      Pre-scaling value, as per datasheet. Lower values
+      allow more fine-grained control of slower fans.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16]
+
+  maxim,fan-target-rpm:
+    description:
+      Initial requested fan rotation speed. If specified, the
+      driver selects closed-loop mode and the requested speed.
+      This ensures the fan is already running before userspace
+      takes over.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 30000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@1b {
+            compatible = "maxim,max6650";
+            reg = <0x1b>;
+            maxim,fan-microvolt = <12000000>;
+            maxim,fan-prescale = <4>;
+            maxim,fan-target-rpm = <1200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
new file mode 100644
index 000000000000..10c2204bc3df
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP1050 digital controller with PMBus interface
+
+maintainers:
+  - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+   The ADP1050 is used to monitor system voltages, currents and temperatures.
+   Through the PMBus interface, the ADP1050 targets isolated power supplies
+   and has four individual monitors for input/output voltage, input current
+   and temperature.
+   Datasheet:
+     https://www.analog.com/en/products/adp1050.html
+
+properties:
+  compatible:
+    const: adi,adp1050
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+
+        hwmon@70 {
+            compatible = "adi,adp1050";
+            reg = <0x70>;
+            vcc-supply = <&vcc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
deleted file mode 100644
index 48886f0ce415..000000000000
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has moved to pwm-fan.yaml.
diff --git a/Documentation/devicetree/bindings/hwmon/st,stts751.yaml b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
new file mode 100644
index 000000000000..9c825adbed58
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STTS751 Thermometer
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: st,stts751
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description:
+      When set, the smbus timeout function will be disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        thermometer@48 {
+            compatible = "st,stts751";
+            reg = <0x48>;
+            smbus-timeout-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt
deleted file mode 100644
index 3ee1dc30e72f..000000000000
--- a/Documentation/devicetree/bindings/hwmon/stts751.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* STTS751 thermometer.
-
-Required node properties:
-- compatible: "stts751"
-- reg: I2C bus address of the device
-
-Optional properties:
-- smbus-timeout-disable: when set, the smbus timeout function will be disabled
-
-Example stts751 node:
-
-temp-sensor {
-	compatible = "stts751";
-	reg = <0x48>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/syna,as370.yaml b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
new file mode 100644
index 000000000000..1f7005f55247
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics AS370 PVT sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: syna,as370-hwmon
+
+  reg:
+    description:
+      Address and length of the register set.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor@ea0810 {
+        compatible = "syna,as370-hwmon";
+        reg = <0xea0810 0xc>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 000000000000..a32035409cee
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+  with a temperature sensor and an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADC128D818
+
+properties:
+  compatible:
+    const: ti,adc128d818
+
+  reg:
+    maxItems: 1
+
+  ti,mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Operation mode.
+      Mode 0  - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+      reading (internal).
+      Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+      Mode 2 - 4 pseudo-differential voltage readings
+      (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+      Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+      voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+    default: 0
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exist, the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "ti,adc128d818";
+            reg = <0x1d>;
+            vref-supply = <&vref>;
+            ti,mode = /bits/ 8 <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..f553235a7321
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The LM87 is a serial interface system hardware monitor
+  with remote diode temperature sensing.
+
+  Datasheets:
+    https://www.ti.com/product/LM87
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This configures pins 18 and 19 to be used as a second
+      remote temperature sensing channel. By default the pins
+      are configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 5 is configured to be used as voltage input
+      in6. Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 6 is configured to be used as voltage input
+      in7. Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description:
+      Regulator supplying power, can be configured to measure
+      5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@2e {
+            compatible = "ti,lm87";
+            reg = <0x2e>;
+            has-temp3;
+            vcc-supply = <&reg_5v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index e07be7bf8395..025d50454f88 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -126,6 +126,8 @@ properties:
           - ibm,cffps1
             # IBM Common Form Factor Power Supply Versions 2
           - ibm,cffps2
+            # IBM On-Chip Controller hwmon device
+          - ibm,p8-occ-hwmon
             # Infineon barometric pressure and temperature sensor
           - infineon,dps310
             # Infineon IR36021 digital POL buck controller
@@ -134,6 +136,8 @@ properties:
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
+            # Infineon Hot-swap controller xdp710
+          - infineon,xdp710
             # Infineon Multi-phase Digital VR Controller xdpe11280
           - infineon,xdpe11280
             # Infineon Multi-phase Digital VR Controller xdpe12254