Merge tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - enable GCOV

 - rework setup of protection map

 - add support for more MSCC platforms

 - add sysfs boardinfo for Loongson64

 - enable KASLR for Loogson64

 - add reset controller for BCM63xx

 - cleanups and fixes

* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
  mips: fix Section mismatch in reference
  MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
  MAINTAINERS: Remove JZ4780 DMA driver entry
  MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
  MIPS: Octeon: irq: Alloc desc before configuring IRQ
  MIPS: mm: Add back define for PAGE_SHARED
  MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
  mips: lib: uncached: fix non-standard usage of variable 'sp'
  MIPS: DTS: img: Fix schema warnings for pwm-leds
  MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
  MIPS: Move memblock_dump_all() to the end of setup_arch()
  MIPS: SMP-CPS: Add support for irq migration when CPU offline
  MIPS: OCTEON: Don't add kernel sections into memblock allocator
  MIPS: Don't round up kernel sections size for memblock_add()
  MIPS: Enable GCOV
  MIPS: configs: drop unused BACKLIGHT_GENERIC option
  MIPS: Loongson64: Fix up reserving kernel memory range
  MIPS: mm: Remove unused is_aligned_hugepage_range
  MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
  mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
  ...

3 files changed, 73 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/sysfs-firmware-lefi-boardinfo b/Documentation/ABI/testing/sysfs-firmware-lefi-boardinfo
new file mode 100644
index 000000000000..5e3f6148c52e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-lefi-boardinfo
@@ -0,0 +1,35 @@
+What:		/sys/firmware/lefi/boardinfo
+Date:		October 2020
+Contact:	Tiezhu Yang <yangtiezhu@loongson.cn>
+Description:
+		Get mainboard and BIOS info easily on the Loongson platform,
+		this is useful to point out the current used mainboard type
+		and BIOS version when there exists problems related with
+		hardware or firmware.
+
+		The related structures are already defined in the interface
+		specification about firmware and kernel which are common
+		requirement and specific for Loongson64, so only add a new
+		boardinfo.c file in arch/mips/loongson64.
+
+		For example:
+
+		[loongson@linux ~]$ cat /sys/firmware/lefi/boardinfo
+		Board Info
+		Manufacturer            : LEMOTE
+		Board Name              : LEMOTE-LS3A4000-7A1000-1w-V01-pc
+		Family                  : LOONGSON3
+
+		BIOS Info
+		Vendor                  : Kunlun
+		Version                 : Kunlun-A1901-V4.1.3-20200414093938
+		ROM Size                : 4 KB
+		Release Date            : 2020-04-14
+
+		By the way, using dmidecode command can get the similar info if there
+		exists SMBIOS in firmware, but the fact is that there is no SMBIOS on
+		some machines, we can see nothing when execute dmidecode, like this:
+
+		[root@linux loongson]# dmidecode
+		# dmidecode 2.12
+		# No SMBIOS nor DMI entry point found, sorry.
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index bc817e984628..cc916eaeed0a 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -4,7 +4,7 @@ Boards with a SoC of the Microsemi MIPS family shall have the following
 properties:
 
 Required properties:
-- compatible: "mscc,ocelot"
+- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
 
 
 * Other peripherals:
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
new file mode 100644
index 000000000000..560cf6522cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,bcm6345-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM6345 reset controller
+
+description: This document describes the BCM6345 reset controller.
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm6345-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@10000010 {
+      compatible = "brcm,bcm6345-reset";
+      reg = <0x10000010 0x4>;
+      #reset-cells = <1>;
+    };