Merge tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "Core MTD changes:
   - Use refcount to prevent corruption
   - Call external _get and _put in right order
   - Fix use-after-free in mtd release
   - Explicitly include correct DT includes
   - Clean refcounting with MTD_PARTITIONED_MASTER
   - mtdblock: make warning messages ratelimited
   - dt-bindings: Add SEAMA partition bindings

  Device driver changes:
   - Use devm helper functions
   - Fix questionable cast, remove pointless ones.
   - error handling fixes
   - add support for new chip versions
   - update DT bindings
   - misc cleanups - fix typos, whitespace, indentation"

* tag 'mtd/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (105 commits)
  dt-bindings: mtd: amlogic,meson-nand: drop unneeded quotes
  mtd: spear_smi: Use helper function devm_clk_get_enabled()
  mtd: rawnand: orion: Use helper function devm_clk_get_optional_enabled()
  mtd: rawnand: vf610_nfc: Use helper function devm_clk_get_enabled()
  mtd: rawnand: sunxi: Use helper function devm_clk_get_enabled()
  mtd: rawnand: stm32_fmc2: Use helper function devm_clk_get_enabled()
  mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()
  mtd: rawnand: mpc5121: Use helper function devm_clk_get_enabled()
  mtd: rawnand: lpc32xx_slc: Use helper function devm_clk_get_enabled()
  mtd: rawnand: intel: Use helper function devm_clk_get_enabled()
  mtd: rawnand: fsmc: Use helper function devm_clk_get_enabled()
  mtd: rawnand: arasan: Use helper function devm_clk_get_enabled()
  mtd: rawnand: qcom: Add read/read_start ops in exec_op path
  mtd: rawnand: qcom: Clear buf_count and buf_start in raw read
  mtd: maps: fix -Wvoid-pointer-to-enum-cast warning
  mtd: rawnand: fix -Wvoid-pointer-to-enum-cast warning
  mtd: rawnand: fsmc: handle clk prepare error in fsmc_nand_resume()
  mtd: rawnand: Propagate error and simplify ternary operators for brcmstb_nand_wait_for_completion()
  mtd: rawnand: qcom: Sort includes alphabetically
  mtd: rawnand: qcom: Do not override the error no of submit_descs()
  ...

6 files changed, 70 insertions, 45 deletions

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 787ef488dd5b..57b6957c8415 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -50,7 +50,7 @@ patternProperties:
         const: hw
 
       nand-ecc-step-size:
-        const: 1024
+        enum: [512, 1024]
 
       nand-ecc-strength:
         enum: [8, 16, 24, 30, 40, 50, 60]
@@ -66,6 +66,10 @@ patternProperties:
 
     unevaluatedProperties: false
 
+    dependencies:
+      nand-ecc-strength: [nand-ecc-step-size]
+      nand-ecc-step-size: [nand-ecc-strength]
+
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 89959e5c47ba..58f0cea160ef 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -43,8 +43,10 @@ properties:
           - const: jedec,spi-nor
       - const: jedec,spi-nor
     description:
-      Must also include "jedec,spi-nor" for any SPI NOR flash that can be
-      identified by the JEDEC READ ID opcode (0x9F).
+      SPI NOR flashes compatible with the JEDEC SFDP standard or which may be
+      identified with the READ ID opcode (0x9F) do not deserve a specific
+      compatible. They should instead only be matched against the generic
+      "jedec,spi-nor" compatible.
 
   reg:
     minItems: 1
@@ -70,6 +72,21 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
+  no-wp:
+    type: boolean
+    description:
+      The status register write disable (SRWD) bit in status register, combined
+      with the WP# signal, provides hardware data protection for the device. When
+      the SRWD bit is set to 1, and the WP# signal is either driven LOW or hard
+      strapped to LOW, the status register nonvolatile bits become read-only and
+      the WRITE STATUS REGISTER operation will not execute. The only way to exit
+      this hardware-protected mode is to drive WP# HIGH. If the WP# signal of the
+      flash device is not connected or is wrongly tied to GND (that includes internal
+      pull-downs) then status register permanently becomes read-only as the SRWD bit
+      cannot be reset. This boolean flag can be used on such systems to avoid setting
+      the SRWD bit while writing the status register. WP# signal hard strapped to GND
+      can be a valid use case.
+
   reset-gpios:
     description:
       A GPIO line connected to the RESET (active low) signal of the device.
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
index a10729bb1840..1ecea848e8b9 100644
--- a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -16,6 +16,7 @@ properties:
           - const: marvell,armada-8k-nand-controller
           - const: marvell,armada370-nand-controller
       - enum:
+          - marvell,ac5-nand-controller
           - marvell,armada370-nand-controller
           - marvell,pxa3xx-nand-controller
       - description: legacy bindings
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 83a4fe4cc29d..28167c0cf271 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
diff --git a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt b/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
deleted file mode 100644
index 2ba07fc8b79c..000000000000
--- a/Documentation/devicetree/bindings/mtd/oxnas-nand.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Oxford Semiconductor OXNAS NAND Controller
-
-Please refer to nand-controller.yaml for generic information regarding MTD NAND bindings.
-
-Required properties:
- - compatible: "oxsemi,ox820-nand"
- - reg: Base address and length for NAND mapped memory.
-
-Optional Properties:
- - clocks: phandle to the NAND gate clock if needed.
- - resets: phandle to the NAND reset control if needed.
-
-Example:
-
-nandc: nand-controller@41000000 {
-	compatible = "oxsemi,ox820-nand";
-	reg = <0x41000000 0x100000>;
-	clocks = <&stdclk CLK_820_NAND>;
-	resets = <&reset RESET_NAND>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
new file mode 100644
index 000000000000..4c1cbf43e81a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/seama.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seattle Image Partitions
+
+description: The SEAttle iMAge (SEAMA) partition is a type of partition
+  used for NAND flash devices. This type of flash image is found in some
+  D-Link routers such as DIR-645, DIR-842, DIR-859, DIR-860L, DIR-885L,
+  DIR890L and DCH-M225, as well as in WD and NEC routers on the ath79
+  (MIPS), Broadcom BCM53xx, and RAMIPS platforms. This partition type
+  does not have children defined in the device tree, they need to be
+  detected by software.
+
+allOf:
+  - $ref: partition.yaml#
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: seama
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "seama";
+            reg = <0x0 0x800000>;
+            label = "firmware";
+        };
+    };