Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...

37 files changed, 338 insertions, 115 deletions

diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index 783d30b7bb42..0692c9aec66f 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -103,7 +103,7 @@ min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
 The flags argument is used to specify which type of interrupt can be used
-by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+by the device and the driver (PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX).
 A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
 any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
 pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index cced568d78e9..dd7b1c0c21da 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -335,7 +335,7 @@ causes the PCI support to program CPU vector data into the PCI device
 capability registers. Many architectures, chip-sets, or BIOSes do NOT
 support MSI or MSI-X and a call to pci_alloc_irq_vectors with just
 the PCI_IRQ_MSI and PCI_IRQ_MSIX flags will fail, so try to always
-specify PCI_IRQ_LEGACY as well.
+specify PCI_IRQ_INTX as well.
 
 Drivers that have different interrupt handlers for MSI/MSI-X and
 legacy INTx should chose the right one based on the msi_enabled
diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
index e00d63971695..f013f3b27c82 100644
--- a/Documentation/PCI/pcieaer-howto.rst
+++ b/Documentation/PCI/pcieaer-howto.rst
@@ -241,7 +241,7 @@ After reboot with new kernel or insert the module, a device file named
 Then, you need a user space tool named aer-inject, which can be gotten
 from:
 
-    https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
+    https://github.com/intel/aer-inject.git
 
 More information about aer-inject can be found in the document in
 its source code.
diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
index a5bd90bc0712..79a21ba0f9fd 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -13,7 +13,7 @@ description:
   Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 # We need a select here so we don't match all nodes with 'snps,dw-pcie'
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
index 215ff9a9c835..c8775f9cb071 100644
--- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -85,7 +85,7 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
index 0e07ab61a48d..5434c144d2ec 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Scott Branden <scott.branden@broadcom.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 22491f7f8852..11f8ea33240c 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -108,7 +108,7 @@ required:
   - msi-controller
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index bc3c48f60fff..a8190d9b100f 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -10,7 +10,6 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
   - $ref: cdns-pcie-host.yaml#
 
 properties:
@@ -25,8 +24,6 @@ properties:
       - const: reg
       - const: cfg
 
-  msi-parent: true
-
 required:
   - reg
   - reg-names
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index a6b494401ebb..f4eb82e684bd 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: cdns-pcie.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
index 92efbf0f1297..378dd1c8e2ee 100644
--- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
@@ -51,7 +51,7 @@ description: |
         <0x6000 0 0 4 &pci_intc 2>;
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
new file mode 100644
index 000000000000..399efa7364c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie-ep.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Endpoint(EP) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe EP controller is based on the Synopsys DesignWare PCIe IP.
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls2088a-pcie-ep
+      - fsl,ls1088a-pcie-ep
+      - fsl,ls1046a-pcie-ep
+      - fsl,ls1028a-pcie-ep
+      - fsl,lx2160ar2-pcie-ep
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: addr_space
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie-ep
+            - fsl,ls1046a-pcie-ep
+            - fsl,ls1088a-pcie-ep
+    then:
+      properties:
+        interrupt-names:
+          items:
+            - const: pme
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie_ep1: pcie-ep@3400000 {
+        compatible = "fsl,ls1028a-pcie-ep";
+        reg = <0x00 0x03400000 0x0 0x00100000
+              0x80 0x00000000 0x8 0x00000000>;
+        reg-names = "regs", "addr_space";
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+        interrupt-names = "pme";
+        num-ib-windows = <6>;
+        num-ob-windows = <8>;
+        status = "disabled";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
new file mode 100644
index 000000000000..793986c5af7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,layerscape-pcie.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape PCIe Root Complex(RC) controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This PCIe RC controller is based on the Synopsys DesignWare PCIe IP
+
+  This controller derives its clocks from the Reset Configuration Word (RCW)
+  which is used to describe the PLL settings at the time of chip-reset.
+
+  Also as per the available Reference Manuals, there is no specific 'version'
+  register available in the Freescale PCIe controller register set,
+  which can allow determining the underlying DesignWare PCIe controller version
+  information.
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-pcie
+      - fsl,ls2080a-pcie
+      - fsl,ls2085a-pcie
+      - fsl,ls2088a-pcie
+      - fsl,ls1088a-pcie
+      - fsl,ls1046a-pcie
+      - fsl,ls1043a-pcie
+      - fsl,ls1012a-pcie
+      - fsl,ls1028a-pcie
+      - fsl,lx2160a-pcie
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: config
+
+  fsl,pcie-scfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the SCFG device node. The second entry is the
+      physical PCIe controller index starting from '0'. This is used to get
+      SCFG PEXN registers.
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: If the PEX_LUT and PF register block is in big-endian, specify
+      this property.
+
+  dma-coherent: true
+
+  msi-parent: true
+
+  iommu-map: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - device_type
+  - bus-range
+  - ranges
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1028a-pcie
+            - fsl,ls1046a-pcie
+            - fsl,ls1043a-pcie
+            - fsl,ls1012a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: pme
+            - const: aer
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls2080a-pcie
+            - fsl,ls2085a-pcie
+            - fsl,ls2088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: intr
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,ls1088a-pcie
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: aer
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie@3400000 {
+        compatible = "fsl,ls1088a-pcie";
+        reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+            <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+        reg-names = "regs", "config";
+        interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+        interrupt-names = "aer";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        dma-coherent;
+        device_type = "pci";
+        bus-range = <0x0 0xff>;
+        ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+        msi-parent = <&its>;
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                        <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+        iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index d25423aa7167..3484e0b4b412 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -116,7 +116,7 @@ required:
   - ranges
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
index debfb54a8042..3cae2e0f7f5e 100644
--- a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -12,7 +12,7 @@ maintainers:
 description: PCI host controller found in the Intel IXP4xx SoC series.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
index 505acc4f3efc..1fd557504b10 100644
--- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Srikanth Thokala <srikanth.thokala@intel.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
deleted file mode 100644
index ee8a4791a78b..000000000000
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-Freescale Layerscape PCIe controller
-
-This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml.
-
-This controller derives its clocks from the Reset Configuration Word (RCW)
-which is used to describe the PLL settings at the time of chip-reset.
-
-Also as per the available Reference Manuals, there is no specific 'version'
-register available in the Freescale PCIe controller register set,
-which can allow determining the underlying DesignWare PCIe controller version
-information.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
-  RC mode:
-        "fsl,ls1021a-pcie"
-        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
-        "fsl,ls2088a-pcie"
-        "fsl,ls1088a-pcie"
-        "fsl,ls1046a-pcie"
-        "fsl,ls1043a-pcie"
-        "fsl,ls1012a-pcie"
-        "fsl,ls1028a-pcie"
-  EP mode:
-	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
-	"fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
-- reg: base addresses and lengths of the PCIe controller register blocks.
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
-  "aer": Used for interrupt line which reports AER events when
-	 non MSI/MSI-X/INTx mode is used
-  "pme": Used for interrupt line which reports PME events when
-	 non MSI/MSI-X/INTx mode is used
-  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
-	  which has a single interrupt line for miscellaneous controller
-	  events(could include AER and PME events).
-- fsl,pcie-scfg: Must include two entries.
-  The first entry must be a link to the SCFG device node
-  The second entry is the physical PCIe controller index starting from '0'.
-  This is used to get SCFG PEXN registers
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
-  of the data transferred from/to the IP block. This can avoid the software
-  cache flush/invalid actions, and improve the performance significantly.
-
-Optional properties:
-- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
-  this property.
-
-Example:
-
-        pcie@3400000 {
-                compatible = "fsl,ls1088a-pcie";
-                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
-                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
-                reg-names = "regs", "config";
-                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
-                interrupt-names = "aer";
-                #address-cells = <3>;
-                #size-cells = <2>;
-                device_type = "pci";
-                dma-coherent;
-                num-viewport = <256>;
-                bus-range = <0x0 0xff>;
-                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
-                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-                msi-parent = <&its>;
-                #interrupt-cells = <1>;
-                interrupt-map-mask = <0 0 0 7>;
-                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
-                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
-                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
-        };
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
index a8324a9bd002..1988465e73a1 100644
--- a/Documentation/devicetree/bindings/pci/loongson.yaml
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -13,7 +13,7 @@ description: |+
   PCI host controller found on Loongson PCHs and SoCs.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
index e63e6458cea8..6fba42156db6 100644
--- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -14,7 +14,7 @@ description: |+
   with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -33,9 +33,12 @@ properties:
 patternProperties:
   '^pcie@[0-2],0$':
     type: object
-    $ref: /schemas/pci/pci-bus.yaml#
+    $ref: /schemas/pci/pci-pci-bridge.yaml#
 
     properties:
+      reg:
+        maxItems: 1
+
       resets:
         maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 7e8c7a2a5f9b..76d742051f73 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -140,7 +140,7 @@ required:
   - interrupt-controller
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index e8212a05b7b1..5d7aec5f54e7 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
index 0d1b23523f62..0a39bbfcb28b 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml
@@ -95,6 +95,6 @@ anyOf:
       - msi-map
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index cf9a6910b542..f867746b1ae5 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -130,7 +130,7 @@ anyOf:
       - msi-map
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
index fe38f62da066..91b81ac75592 100644
--- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-ep.yaml
@@ -16,7 +16,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: renesas,r8a779f0-pcie-ep   # R-Car S4-8
+      - enum:
+          - renesas,r8a779f0-pcie-ep      # R-Car S4-8
+          - renesas,r8a779g0-pcie-ep      # R-Car V4H
       - const: renesas,rcar-gen4-pcie-ep  # R-Car Gen4
 
   reg:
diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
index ffb34339b637..955c664f1fbb 100644
--- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml
@@ -16,7 +16,9 @@ allOf:
 properties:
   compatible:
     items:
-      - const: renesas,r8a779f0-pcie   # R-Car S4-8
+      - enum:
+          - renesas,r8a779f0-pcie      # R-Car S4-8
+          - renesas,r8a779g0-pcie      # R-Car V4H
       - const: renesas,rcar-gen4-pcie  # R-Car Gen4
 
   reg:
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index b6a7cb32f61e..666f013e3af8 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -77,6 +77,9 @@ properties:
   vpcie12v-supply:
     description: The 12v regulator to use for PCIe.
 
+  iommu-map: true
+  iommu-map-mask: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
index 5a0d64d3ae6b..b288cdb1ec70 100644
--- a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -110,7 +110,7 @@ required:
   - "#interrupt-cells"
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
index 531008f0b6ac..720a5f945a4e 100644
--- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Shawn Lin <shawn.lin@rock-chips.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: rockchip,rk3399-pcie-common.yaml#
 
 properties:
@@ -37,6 +37,7 @@ properties:
     description: This property is needed if using 24MHz OSC for RC's PHY.
 
   ep-gpios:
+    maxItems: 1
     description: pre-reset GPIO
 
   vpcie12v-supply:
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 022055edbf9e..548f59d76ef2 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -23,7 +23,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
   - if:
       not:
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
index a20dccbafd94..0a9d10532cc8 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -11,7 +11,7 @@ maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
@@ -55,6 +55,20 @@ properties:
 
   dma-coherent: true
 
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  phys:
+    description: per-lane PHYs
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      pattern: '^pcie-phy[0-1]$'
+
 required:
   - compatible
   - reg
@@ -74,6 +88,7 @@ then:
     - dma-coherent
     - power-domains
     - msi-map
+    - num-viewport
 
 unevaluatedProperties: false
 
@@ -81,6 +96,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
     pcie0_rc: pcie@5500000 {
@@ -98,9 +114,13 @@ examples:
         ti,syscon-pcie-id = <&scm_conf 0x0210>;
         ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
+        num-viewport = <16>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
         msi-map = <0x0 &gic_its 0x0 0x10000>;
         device_type = "pci";
+        num-lanes = <1>;
+        phys = <&serdes0 PHY_TYPE_PCIE 0>;
+        phy-names = "pcie-phy0";
     };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index b7a534cef24d..15a2658ceeef 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -23,6 +23,10 @@ properties:
         items:
           - const: ti,j7200-pcie-host
           - const: ti,j721e-pcie-host
+      - description: PCIe controller in J722S
+        items:
+          - const: ti,j722s-pcie-host
+          - const: ti,j721e-pcie-host
 
   reg:
     maxItems: 4
@@ -68,6 +72,7 @@ properties:
       - 0xb00d
       - 0xb00f
       - 0xb010
+      - 0xb012
       - 0xb013
 
   msi-map: true
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
index 09748ef6b94f..294c7cd84b37 100644
--- a/Documentation/devicetree/bindings/pci/versatile.yaml
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -13,7 +13,7 @@ description: |+
   PCI host controller found on the ARM Versatile PB board's FPGA.
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index c41344f8a242..4770ce02fcc3 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
index 69b7decabd45..fb87b960a250 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
index cbe832c23dae..9cad860c51a3 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
   - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
index 0aa00b8e49b3..2f59b3a73dd2 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
 
 allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/translations/zh_CN/PCI/msi-howto.rst b/Documentation/translations/zh_CN/PCI/msi-howto.rst
index 1b9b5ea790d8..95baadf767e4 100644
--- a/Documentation/translations/zh_CN/PCI/msi-howto.rst
+++ b/Documentation/translations/zh_CN/PCI/msi-howto.rst
@@ -88,7 +88,7 @@ MSI功能。
 如果设备对最小数量的向量有要求，驱动程序可以传递一个min_vecs参数，设置为这个限制，
 如果PCI核不能满足最小数量的向量，将返回-ENOSPC。
 
-flags参数用来指定设备和驱动程序可以使用哪种类型的中断（PCI_IRQ_LEGACY, PCI_IRQ_MSI,
+flags参数用来指定设备和驱动程序可以使用哪种类型的中断（PCI_IRQ_INTX, PCI_IRQ_MSI,
 PCI_IRQ_MSIX）。一个方便的短语（PCI_IRQ_ALL_TYPES）也可以用来要求任何可能的中断类型。
 如果PCI_IRQ_AFFINITY标志被设置，pci_alloc_irq_vectors()将把中断分散到可用的CPU上。
 
diff --git a/Documentation/translations/zh_CN/PCI/pci.rst b/Documentation/translations/zh_CN/PCI/pci.rst
index 83c2a41d38d3..347f5c3f5ce9 100644
--- a/Documentation/translations/zh_CN/PCI/pci.rst
+++ b/Documentation/translations/zh_CN/PCI/pci.rst
@@ -304,7 +304,7 @@ MSI-X可以分配几个单独的向量。
 的PCI_IRQ_MSI和/或PCI_IRQ_MSIX标志来启用MSI功能。这将导致PCI支持将CPU向量数
 据编程到PCI设备功能寄存器中。许多架构、芯片组或BIOS不支持MSI或MSI-X，调用
 ``pci_alloc_irq_vectors`` 时只使用PCI_IRQ_MSI和PCI_IRQ_MSIX标志会失败，
-所以尽量也要指定 ``PCI_IRQ_LEGACY`` 。
+所以尽量也要指定 ``PCI_IRQ_INTX`` 。
 
 对MSI/MSI-X和传统INTx有不同中断处理程序的驱动程序应该在调用
 ``pci_alloc_irq_vectors`` 后根据 ``pci_dev``结构体中的 ``msi_enabled``