diff options
author | 2014-12-15 20:32:42 -0800 | |
---|---|---|
committer | 2014-12-15 20:32:42 -0800 | |
commit | f20c86cd75f1c8c728dafd0218645ff3c5e8545d (patch) | |
tree | b9100463df79eeafbef87a0bbbaaba4740313120 /Documentation | |
parent | Input: xpad - use proper endpoint type (diff) | |
parent | Input: gpio_keys - fix warning regarding uninitialized 'button' variable (diff) | |
download | linux-f20c86cd75f1c8c728dafd0218645ff3c5e8545d.tar.gz linux-f20c86cd75f1c8c728dafd0218645ff3c5e8545d.tar.bz2 linux-f20c86cd75f1c8c728dafd0218645ff3c5e8545d.zip |
Merge branch 'next' into for-linus
Prepare input updates for 3.19.
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/input/cap11xx.txt (renamed from Documentation/devicetree/bindings/input/cap1106.txt) | 26 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/elan_i2c.txt | 34 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/elants_i2c.txt | 33 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/input/gpio-keys.txt | 10 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 |
5 files changed, 93 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap11xx.txt index 4b463904cba0..7d0a3009771b 100644 --- a/Documentation/devicetree/bindings/input/cap1106.txt +++ b/Documentation/devicetree/bindings/input/cap11xx.txt @@ -1,14 +1,16 @@ -Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor +Device tree bindings for Microchip CAP11xx based capacitive touch sensors -The node for this driver must be a child of a I2C controller node, as the +The node for this device must be a child of a I2C controller node, as the device communication via I2C only. Required properties: - compatible: Must be "microchip,cap1106" + compatible: Must contain one of: + "microchip,cap1106" + "microchip,cap1126" + "microchip,cap1188" reg: The I2C slave address of the device. - Only 0x28 is valid. interrupts: Property describing the interrupt line the device's ALERT#/CM_IRQ# pin is connected to. @@ -26,6 +28,10 @@ Optional properties: Valid values are 1, 2, 4, and 8. By default, a gain of 1 is set. + microchip,irq-active-high: By default the interrupt pin is active low + open drain. This property allows using the active + high push-pull output. + linux,keycodes: Specifies an array of numeric keycode values to be used for the channels. If this property is omitted, KEY_A, KEY_B, etc are used as @@ -43,11 +49,11 @@ i2c_controller { autorepeat; microchip,sensor-gain = <2>; - linux,keycodes = <103 /* KEY_UP */ - 106 /* KEY_RIGHT */ - 108 /* KEY_DOWN */ - 105 /* KEY_LEFT */ - 109 /* KEY_PAGEDOWN */ - 104>; /* KEY_PAGEUP */ + linux,keycodes = <103>, /* KEY_UP */ + <106>, /* KEY_RIGHT */ + <108>, /* KEY_DOWN */ + <105>, /* KEY_LEFT */ + <109>, /* KEY_PAGEDOWN */ + <104>; /* KEY_PAGEUP */ }; } diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt new file mode 100644 index 000000000000..ee3242c4ba67 --- /dev/null +++ b/Documentation/devicetree/bindings/input/elan_i2c.txt @@ -0,0 +1,34 @@ +Elantech I2C Touchpad + +Required properties: +- compatible: must be "elan,ekth3000". +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). + +Optional properties: +- wakeup-source: touchpad can be used as a wakeup source. +- pinctrl-names: should be "default" (see pinctrl binding [1]). +- pinctrl-0: a phandle pointing to the pin settings for the device (see + pinctrl binding [1]). +- vcc-supply: a phandle for the regulator supplying 3.3V power. + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + &i2c1 { + /* ... */ + + touchpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/elants_i2c.txt b/Documentation/devicetree/bindings/input/elants_i2c.txt new file mode 100644 index 000000000000..a765232e6446 --- /dev/null +++ b/Documentation/devicetree/bindings/input/elants_i2c.txt @@ -0,0 +1,33 @@ +Elantech I2C Touchscreen + +Required properties: +- compatible: must be "elan,ekth3500". +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). + +Optional properties: +- wakeup-source: touchscreen can be used as a wakeup source. +- pinctrl-names: should be "default" (see pinctrl binding [1]). +- pinctrl-0: a phandle pointing to the pin settings for the device (see + pinctrl binding [1]). + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + &i2c1 { + /* ... */ + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index 5c2c02140a62..a4a38fcf2ed6 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -10,10 +10,13 @@ Optional properties: Each button (key) is represented as a sub-node of "gpio-keys": Subnode properties: - - gpios: OF device-tree gpio specification. - label: Descriptive name of the key. - linux,code: Keycode to emit. +Required mutual exclusive subnode-properties: + - gpios: OF device-tree gpio specification. + - interrupts: the interrupt line for that input + Optional subnode-properties: - linux,input-type: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. @@ -33,4 +36,9 @@ Example nodes: linux,code = <103>; gpios = <&gpio1 0 1>; }; + button@22 { + label = "GPIO Key DOWN"; + linux,code = <108>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + }; ... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac7269f90764..e6469ec7a90e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -42,6 +42,7 @@ dlink D-Link Corporation dmo Data Modul AG ebv EBV Elektronik edt Emerging Display Technologies +elan Elan Microelectronic Corp. emmicro EM Microelectronic epcos EPCOS AG epfl Ecole Polytechnique Fédérale de Lausanne |