diff options
author | 2017-10-19 17:36:08 +0200 | |
---|---|---|
committer | 2017-10-19 17:36:08 +0200 | |
commit | ca7325a2b1fb6bba48e13afe4dce070e29467cc5 (patch) | |
tree | e79f09ad62296d22a6e26bf1f107a1dfa3d4be89 /arch/arm/boot | |
parent | Merge tag 'arm-soc/for-4.14/devicetree-fixes' of http://github.com/Broadcom/s... (diff) | |
parent | ARM: dts: at91: sama5d2: add ADC hw trigger edge type (diff) | |
download | linux-ca7325a2b1fb6bba48e13afe4dce070e29467cc5.tar.gz linux-ca7325a2b1fb6bba48e13afe4dce070e29467cc5.tar.bz2 linux-ca7325a2b1fb6bba48e13afe4dce070e29467cc5.zip |
Merge tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Fixes: second batch for 4.14:
- one DT phy address fix for the new sama5d27 som1 ek
- two DT ADC patches that were forgotten while moving to
hardware triggers for sama5d2 (iio changes already applied)
* tag 'at91-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: dts: at91: sama5d2: add ADC hw trigger edge type
ARM: dts: at91: sama5d2_xplained: enable ADTRG pin
ARM: dts: at91: at91-sama5d27_som1: fix PHY ID
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 | ||||
-rw-r--r-- | arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 | ||||
-rw-r--r-- | arch/arm/boot/dts/sama5d2.dtsi | 1 |
3 files changed, 18 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 63a5af898165..cf0087b4c9e1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -67,8 +67,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; - ethernet-phy@1 { - reg = <0x1>; + ethernet-phy@0 { + reg = <0x0>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index c7e9ccf2bc87..cbc26001247b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -309,7 +309,7 @@ vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc_default>; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; status = "okay"; }; @@ -340,6 +340,20 @@ bias-disable; }; + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = <PIN_PD31__ADTRG>; + bias-pull-up; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 38d2216c7ead..b1a26b42d190 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1430,6 +1430,7 @@ atmel,min-sample-rate-hz = <200000>; atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; |