diff options
author | Russell King <rmk+kernel@armlinux.org.uk> | 2020-04-02 19:42:29 +0100 |
---|---|---|
committer | Russell King <rmk+kernel@armlinux.org.uk> | 2020-04-02 19:42:29 +0100 |
commit | 0b521e9e31453ce1395000a6829f09fd35a0c138 (patch) | |
tree | 7cf4df23ee71d701bf7ed4f3246fce6620697afe /arch/arm | |
parent | ARM: 8966/1: rpc: replace setup_irq() by request_irq() (diff) | |
parent | Merge tag 'arm32-efi-cache-ops-for-rmk' of git://git.kernel.org/pub/scm/linux... (diff) | |
download | linux-0b521e9e31453ce1395000a6829f09fd35a0c138.tar.gz linux-0b521e9e31453ce1395000a6829f09fd35a0c138.tar.bz2 linux-0b521e9e31453ce1395000a6829f09fd35a0c138.zip |
Merge branches 'misc' and 'devel-stable' into for-linus
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/compressed/head.S | 162 |
1 files changed, 86 insertions, 76 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 088b0a060876..4f7c6145e31f 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -151,6 +151,25 @@ .L_\@: .endm + /* + * The kernel build system appends the size of the + * decompressed kernel at the end of the compressed data + * in little-endian form. + */ + .macro get_inflated_image_size, res:req, tmp1:req, tmp2:req + adr \res, .Linflated_image_size_offset + ldr \tmp1, [\res] + add \tmp1, \tmp1, \res @ address of inflated image size + + ldrb \res, [\tmp1] @ get_unaligned_le32 + ldrb \tmp2, [\tmp1, #1] + orr \res, \res, \tmp2, lsl #8 + ldrb \tmp2, [\tmp1, #2] + ldrb \tmp1, [\tmp1, #3] + orr \res, \res, \tmp2, lsl #16 + orr \res, \res, \tmp1, lsl #24 + .endm + .section ".start", "ax" /* * sort out different calling conventions @@ -268,15 +287,15 @@ not_angel: */ mov r0, pc cmp r0, r4 - ldrcc r0, LC0+32 + ldrcc r0, LC0+28 addcc r0, r0, pc cmpcc r4, r0 orrcc r4, r4, #1 @ remember we skipped cache_on blcs cache_on restart: adr r0, LC0 - ldmia r0, {r1, r2, r3, r6, r10, r11, r12} - ldr sp, [r0, #28] + ldmia r0, {r1, r2, r3, r6, r11, r12} + ldr sp, [r0, #24] /* * We might be running at a different address. We need @@ -284,20 +303,8 @@ restart: adr r0, LC0 */ sub r0, r0, r1 @ calculate the delta offset add r6, r6, r0 @ _edata - add r10, r10, r0 @ inflated kernel size location - /* - * The kernel build system appends the size of the - * decompressed kernel at the end of the compressed data - * in little-endian form. - */ - ldrb r9, [r10, #0] - ldrb lr, [r10, #1] - orr r9, r9, lr, lsl #8 - ldrb lr, [r10, #2] - ldrb r10, [r10, #3] - orr r9, r9, lr, lsl #16 - orr r9, r9, r10, lsl #24 + get_inflated_image_size r9, r10, lr #ifndef CONFIG_ZBOOT_ROM /* malloc space is above the relocated stack (64k max) */ @@ -521,11 +528,8 @@ dtb_check_done: /* Preserve offset to relocated code. */ sub r6, r9, r6 -#ifndef CONFIG_ZBOOT_ROM - /* cache_clean_flush may use the stack, so relocate it */ - add sp, sp, r6 -#endif - + mov r0, r9 @ start of relocated zImage + add r1, sp, r6 @ end of relocated zImage bl cache_clean_flush badr r0, restart @@ -622,6 +626,11 @@ not_relocated: mov r0, #0 add r2, sp, #0x10000 @ 64k max mov r3, r7 bl decompress_kernel + + get_inflated_image_size r1, r2, r3 + + mov r0, r4 @ start of inflated image + add r1, r1, r0 @ end of inflated image bl cache_clean_flush bl cache_off @@ -652,13 +661,15 @@ LC0: .word LC0 @ r1 .word __bss_start @ r2 .word _end @ r3 .word _edata @ r6 - .word input_data_end - 4 @ r10 (inflated size location) .word _got_start @ r11 .word _got_end @ ip .word .L_user_stack_end @ sp .word _end - restart + 16384 + 1024*1024 .size LC0, . - LC0 +.Linflated_image_size_offset: + .long (input_data_end - 4) - . + #ifdef CONFIG_ARCH_RPC .globl params params: ldr r0, =0x10000100 @ params_phys for RPC @@ -668,6 +679,24 @@ params: ldr r0, =0x10000100 @ params_phys for RPC #endif /* + * dcache_line_size - get the minimum D-cache line size from the CTR register + * on ARMv7. + */ + .macro dcache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif + lsr \tmp, \tmp, #16 + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word + mov \reg, \reg, lsl \tmp @ actual cache line size + .endm + +/* * Turn on the cache. We need to setup some page tables so that we * can have both the I and D caches on. * @@ -1159,8 +1188,6 @@ __armv7_mmu_cache_off: bic r0, r0, #0x000c #endif mcr p15, 0, r0, c1, c0 @ turn MMU and cache off - mov r12, lr - bl __armv7_mmu_cache_flush mov r0, #0 #ifdef CONFIG_MMU mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB @@ -1168,11 +1195,14 @@ __armv7_mmu_cache_off: mcr p15, 0, r0, c7, c5, 6 @ invalidate BTC mcr p15, 0, r0, c7, c10, 4 @ DSB mcr p15, 0, r0, c7, c5, 4 @ ISB - mov pc, r12 + mov pc, lr /* * Clean and flush the cache to maintain consistency. * + * On entry, + * r0 = start address + * r1 = end address (exclusive) * On exit, * r1, r2, r3, r9, r10, r11, r12 corrupted * This routine must preserve: @@ -1181,6 +1211,7 @@ __armv7_mmu_cache_off: .align 5 cache_clean_flush: mov r3, #16 + mov r11, r1 b call_cache_fn __armv4_mpu_cache_flush: @@ -1231,51 +1262,16 @@ __armv7_mmu_cache_flush: mcr p15, 0, r10, c7, c14, 0 @ clean+invalidate D b iflush hierarchical: - mcr p15, 0, r10, c7, c10, 5 @ DMB - stmfd sp!, {r0-r7, r9-r11} - mrc p15, 1, r0, c0, c0, 1 @ read clidr - ands r3, r0, #0x7000000 @ extract loc from clidr - mov r3, r3, lsr #23 @ left align loc bit field - beq finished @ if loc is 0, then no need to clean - mov r10, #0 @ start clean at cache level 0 -loop1: - add r2, r10, r10, lsr #1 @ work out 3x current cache level - mov r1, r0, lsr r2 @ extract cache type bits from clidr - and r1, r1, #7 @ mask of the bits for current cache only - cmp r1, #2 @ see what cache we have at this level - blt skip @ skip if no cache, or just i-cache - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr - mcr p15, 0, r10, c7, c5, 4 @ isb to sych the new cssr&csidr - mrc p15, 1, r1, c0, c0, 0 @ read the new csidr - and r2, r1, #7 @ extract the length of the cache lines - add r2, r2, #4 @ add 4 (line length offset) - ldr r4, =0x3ff - ands r4, r4, r1, lsr #3 @ find maximum number on the way size - clz r5, r4 @ find bit position of way size increment - ldr r7, =0x7fff - ands r7, r7, r1, lsr #13 @ extract max number of the index size -loop2: - mov r9, r4 @ create working copy of max way size -loop3: - ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 - ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r9, r5 ) - THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 - THUMB( lsl r6, r7, r2 ) - THUMB( orr r11, r11, r6 ) @ factor index number into r11 - mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the way - bge loop3 - subs r7, r7, #1 @ decrement the index - bge loop2 -skip: - add r10, r10, #2 @ increment cache number - cmp r3, r10 - bgt loop1 -finished: - ldmfd sp!, {r0-r7, r9-r11} - mov r10, #0 @ switch back to cache level 0 - mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dcache_line_size r1, r2 @ r1 := dcache min line size + sub r2, r1, #1 @ r2 := line size mask + bic r0, r0, r2 @ round down start to line size + sub r11, r11, #1 @ end address is exclusive + bic r11, r11, r2 @ round down end to line size +0: cmp r0, r11 @ finished? + bgt iflush + mcr p15, 0, r0, c7, c14, 1 @ Dcache clean/invalidate by VA + add r0, r0, r1 + b 0b iflush: mcr p15, 0, r10, c7, c10, 4 @ DSB mcr p15, 0, r10, c7, c5, 0 @ invalidate I+BTB @@ -1460,7 +1456,24 @@ ENTRY(efi_stub_entry) @ Preserve return value of efi_entry() in r4 mov r4, r0 + add r1, r4, #SZ_2M @ DT end + bl cache_clean_flush + + ldr r0, [sp] @ relocated zImage + ldr r1, =_edata @ size of zImage + add r1, r1, r0 @ end of zImage bl cache_clean_flush + + @ The PE/COFF loader might not have cleaned the code we are + @ running beyond the PoU, and so calling cache_off below from + @ inside the PE/COFF loader allocated region is unsafe. Let's + @ assume our own zImage relocation code did a better job, and + @ jump into its version of this routine before proceeding. + ldr r0, [sp] @ relocated zImage + ldr r1, .Ljmp + sub r1, r0, r1 + mov pc, r1 @ no mode switch +0: bl cache_off @ Set parameters for booting zImage according to boot protocol @@ -1469,18 +1482,15 @@ ENTRY(efi_stub_entry) mov r0, #0 mov r1, #0xFFFFFFFF mov r2, r4 - - @ Branch to (possibly) relocated zImage that is in [sp] - ldr lr, [sp] - ldr ip, =start_offset - add lr, lr, ip - mov pc, lr @ no mode switch + b __efi_start efi_load_fail: @ Return EFI_LOAD_ERROR to EFI firmware on error. ldr r0, =0x80000001 ldmfd sp!, {ip, pc} ENDPROC(efi_stub_entry) + .align 2 +.Ljmp: .long start - 0b #endif .align |