diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2020-03-25 18:34:25 +0100 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-03-29 21:44:26 -0700 |
commit | 1b68480b945e51ba879496d3f9ff5a5addd82007 (patch) | |
tree | 9d0cc0fe2f3d7170cb9670845f5846ced9f7e6e6 /arch/arm | |
parent | net: phy: micrel.c: add rgmii interface delay possibility to ksz9131 (diff) | |
download | linux-1b68480b945e51ba879496d3f9ff5a5addd82007.tar.gz linux-1b68480b945e51ba879496d3f9ff5a5addd82007.tar.bz2 linux-1b68480b945e51ba879496d3f9ff5a5addd82007.zip |
ARM: dts: apalis-imx6qdl: use rgmii-id instead of rgmii
Until now a PHY-fixup in mach-imx set our rgmii timing correctly. For
the PHY KSZ9131 there is no PHY-fixup in mach-imx. To support this PHY
too, use rgmii-id.
For the now used KSZ9031 nothing will change, as rgmii-id is only
implemented and supported by the KSZ9131.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-apalis.dtsi | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 1b5bc6b5e806..347a5edc6927 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -180,7 +180,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy>; phy-reset-duration = <10>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |