Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC device tree updates from Arnd Bergmann: "There is very little going on with new SoC support this time, all the new chips are variations of others that we already support, and they are all based on ARMv8 cores: - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are networking SoCs designed to be used in wireless routers, similar to the already supported MT7986A (Filogic 830). - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less. These are used in many embedded and industrial applications. - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are automotive SoCs. - TI J722S is another automotive variant of its K3 family, related to the AM62 series. There are a total of 7 new arm32 machines and 45 arm64 ones, including - Two Android phones based on the old Tegra30 chip - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a SoM development board - A set-top box using Amlogic Meson G12A S905X2 - Eight embedded board using NXP i.MX6/8/9 - Three machines using Mediatek network router chips - Ten Chromebooks, all based on Mediatek MT8186 - One development board based on Mediatek MT8395 (Genio 1200) - Seven tablets and phones based on Qualcomm SoCs, most of them from Samsung. - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2) - Three variants of the "White Hawk" board for Renesas automotive SoCs - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game console and industrial form factors. - Three evaluation boards for TI K3 based SoCs The other changes are mainly the usual feature additions for existing hardware, cleanups, and dtc compile time fixes. One notable change is the inclusion of PowerVR SGX GPU nodes on TI SoCs" * tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits) riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig riscv: dts: starfive: jh7100: fix root clock names ARM: dts: samsung: exynos4412: decrease memory to account for unusable region arm64: dts: qcom: sm8250-xiaomi-elish: set rotation arm64: dts: qcom: sm8650: Fix SPMI channels size arm64: dts: qcom: sm8550: Fix SPMI channels size arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk dtc: Enable dtc interrupt_provider check arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2024-03-12 10:29:57 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2024-03-12 10:29:57 -0700
commit: 306bee64b73c92f43df46db7e92621f3309fd28b (patch)
tree: e085a10fbbf0edaae207e1390c436ccbf74451d6 /arch/arm
parent: Merge tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/g... (diff)
parent: Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/l... (diff)
download: linux-306bee64b73c92f43df46db7e92621f3309fd28b.tar.gz
linux-306bee64b73c92f43df46db7e92621f3309fd28b.tar.bz2
linux-306bee64b73c92f43df46db7e92621f3309fd28b.zip
184 files changed, 6682 insertions, 1666 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 473280d5adce..d82908b1b1bb 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,9 +158,7 @@ textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
index 9f39b5a2bb35..c12361d0317f 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -42,6 +42,13 @@
 	vcc-pg-supply = <&reg_dldo1>;
 };
 
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/amlogic/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index 8e3860d5d916..8cb0fc78b2af 100644
--- a/arch/arm/boot/dts/amlogic/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -23,7 +23,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		cbus: cbus@c1100000 {
+		cbus: bus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
@@ -206,7 +206,7 @@
 			};
 		};
 
-		aobus: aobus@c8100000 {
+		aobus: bus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
@@ -302,7 +302,7 @@
 			reg = <0xd9040000 0x10000>;
 		};
 
-		secbus: secbus@da000000 {
+		secbus: bus@da000000 {
 			compatible = "simple-bus";
 			reg = <0xda000000 0x6000>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
index 59932fbfd5d5..f57be9ae150f 100644
--- a/arch/arm/boot/dts/amlogic/meson8.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -645,7 +645,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
index 5198f5177c2c..2d9d24d3a95d 100644
--- a/arch/arm/boot/dts/amlogic/meson8b.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -620,7 +620,6 @@
 };
 
 &hwrng {
-	compatible = "amlogic,meson8b-rng", "amlogic,meson-rng";
 	clocks = <&clkc CLKID_RNG0>;
 	clock-names = "core";
 };
diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index efed325af88d..d99bac02232b 100644
--- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -451,7 +451,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
index 7072a70da00d..367850ea0912 100644
--- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -129,8 +129,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -154,6 +152,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J30";
 
 		port {
 			vga_con_in: endpoint {
diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
index f31dcf7e5862..de45aa99e260 100644
--- a/arch/arm/boot/dts/arm/versatile-ab.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -32,8 +32,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -59,6 +57,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J1";
 
 		port {
 			vga_con_in: endpoint {
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
index 5916e4877eac..8bf35666412b 100644
--- a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -20,7 +20,9 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	chosen { };
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
index 396149664297..b4dbcf8f168e 100644
--- a/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
@@ -187,7 +187,7 @@
 	};
 
 	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
+	ethernet-switch {
 		compatible = "realtek,rtl8366rb";
 		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
 		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -204,36 +204,36 @@
 			#interrupt-cells = <1>;
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 				phy-handle = <&phy0>;
 			};
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 				phy-handle = <&phy1>;
 			};
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 				phy-handle = <&phy2>;
 			};
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 				phy-handle = <&phy3>;
 			};
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 				phy-handle = <&phy4>;
 			};
-			rtl8366rb_cpu_port: port@5 {
+			rtl8366rb_cpu_port: ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&gmac0>;
@@ -252,27 +252,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy0: phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <0>;
 			};
-			phy1: phy@1 {
+			phy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <1>;
 			};
-			phy2: phy@2 {
+			phy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <2>;
 			};
-			phy3: phy@3 {
+			phy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <3>;
 			};
-			phy4: phy@4 {
+			phy4: ethernet-phy@4 {
 				reg = <4>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <12>;
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
index 138c47e1ac1b..8c54d3a5a721 100644
--- a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
index 91c19e8ebfe8..4992ec276de9 100644
--- a/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -93,7 +93,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7385";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -101,27 +101,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/arch/arm/boot/dts/gemini/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
index d0efd76695da..f8c6f6e5cdea 100644
--- a/arch/arm/boot/dts/gemini/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -78,7 +78,7 @@
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7395";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -86,27 +86,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
index 3c88c59ab481..6a0c89e0c918 100644
--- a/arch/arm/boot/dts/gemini/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -28,10 +28,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
index ff72bbc4db3e..d8b34ebad4b0 100644
--- a/arch/arm/boot/dts/gemini/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-setup {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Conflict with ICE */
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 1707d1b01545..cb85f8e31dfc 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -4,6 +4,18 @@
 
 / {
 	model = "SolidRun Clearfog GTR L8";
+	compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385",
+		     "marvell,armada380";
+
+	/* CON25 */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp1_pins>;
+		pinctrl-names = "default";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &mdio {
@@ -20,57 +32,65 @@
 
 			ethernet-port@1 {
 				reg = <1>;
-				label = "lan8";
+				label = "lan1";
 				phy-handle = <&switch0phy0>;
 			};
 
 			ethernet-port@2 {
 				reg = <2>;
-				label = "lan7";
+				label = "lan2";
 				phy-handle = <&switch0phy1>;
 			};
 
 			ethernet-port@3 {
 				reg = <3>;
-				label = "lan6";
+				label = "lan3";
 				phy-handle = <&switch0phy2>;
 			};
 
 			ethernet-port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan4";
 				phy-handle = <&switch0phy3>;
 			};
 
 			ethernet-port@5 {
 				reg = <5>;
-				label = "lan4";
+				label = "lan5";
 				phy-handle = <&switch0phy4>;
 			};
 
 			ethernet-port@6 {
 				reg = <6>;
-				label = "lan3";
+				label = "lan6";
 				phy-handle = <&switch0phy5>;
 			};
 
 			ethernet-port@7 {
 				reg = <7>;
-				label = "lan2";
+				label = "lan7";
 				phy-handle = <&switch0phy6>;
 			};
 
 			ethernet-port@8 {
 				reg = <8>;
-				label = "lan1";
+				label = "lan8";
 				phy-handle = <&switch0phy7>;
 			};
 
+			ethernet-port@9 {
+				reg = <9>;
+				label = "lan-sfp";
+				phy-mode = "sgmii";
+				sfp = <&sfp1>;
+				managed = "in-band-status";
+			};
+
 			ethernet-port@10 {
 				reg = <10>;
 				phy-mode = "2500base-x";
-
 				ethernet = <&eth1>;
+
 				fixed-link {
 					speed = <2500>;
 					full-duplex;
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
index a7678a784c18..5f83d981449a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts
@@ -4,6 +4,8 @@
 
 / {
 	model = "SolidRun Clearfog GTR S4";
+	compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385",
+		     "marvell,armada380";
 };
 
 &sfp0 {
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
index d1452a04e904..f3a3cb6ac311 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi
@@ -141,18 +141,13 @@
 			};
 
 			pinctrl@18000 {
-				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
-					marvell,pins = "mpp22";
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
-					marvell,pins = "mpp23";
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
 					marvell,function = "gpio";
 				};
 
@@ -162,6 +157,37 @@
 					marvell,function = "i2c1";
 				};
 
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_led_pins: led-pins {
+					marvell,pins = "mpp42", "mpp52";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_lte_disable_pins: lte-disable-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_pci_pins: pci-pins {
+					// pci reset
+					marvell,pins = "mpp33", "mpp35", "mpp44";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+
 				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
 					marvell,pins = "mpp21", "mpp28",
 						       "mpp37", "mpp38",
@@ -169,13 +195,15 @@
 					marvell,function = "sd0";
 				};
 
-				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
-					marvell,pins = "mpp47";
+				cf_gtr_sfp0_pins: sfp0-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp25", "mpp46";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
-					marvell,pins = "mpp48";
+				cf_gtr_sfp1_pins: sfp1-pins {
+					/* sfp modabs, txdisable */
+					marvell,pins = "mpp24", "mpp54";
 					marvell,function = "gpio";
 				};
 
@@ -184,13 +212,18 @@
 					marvell,function = "spi1";
 				};
 
-				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
-					marvell,pins = "mpp53";
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
 					marvell,function = "gpio";
 				};
 
-				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
-					marvell,pins = "mpp36";
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_wifi_disable_pins: wifi-disable-pins {
+					marvell,pins = "mpp30", "mpp31";
 					marvell,function = "gpio";
 				};
 			};
@@ -221,21 +254,26 @@
 		};
 
 		pcie {
+			pinctrl-0 = <&cf_gtr_pci_pins>;
+			pinctrl-names = "default";
 			status = "okay";
 			/*
 			 * The PCIe units are accessible through
 			 * the mini-PCIe connectors on the board.
 			 */
+			/* CON3 - serdes 0 */
 			pcie@1,0 {
 				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON4 - serdes 2 */
 			pcie@2,0 {
 				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 				status = "okay";
 			};
 
+			/* CON2 - serdes 4 */
 			pcie@3,0 {
 				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 				status = "okay";
@@ -243,10 +281,12 @@
 		};
 	};
 
-	sfp0: sfp {
+	/* CON5 */
+	sfp0: sfp-0 {
 		compatible = "sff,sfp";
+		pinctrl-0 = <&cf_gtr_sfp0_pins>;
+		pinctrl-names = "default";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 	};
@@ -273,6 +313,8 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&cf_gtr_led_pins>;
+		pinctrl-names = "default";
 
 		led1 {
 			function = LED_FUNCTION_CPU;
@@ -408,7 +450,7 @@
 };
 
 &gpio0 {
-	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>;
 	pinctrl-names = "default";
 
 	wifi-disable {
@@ -420,7 +462,7 @@
 };
 
 &gpio1 {
-	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>;
 	pinctrl-names = "default";
 
 	lte-disable {
diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
index 3290ccad2374..09bf2e6d4ed0 100644
--- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts
@@ -10,8 +10,9 @@
 
 / {
 	model = "SolidRun Clearfog A1";
-	compatible = "solidrun,clearfog-a1", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
+	compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1",
+		     "marvell,armada388", "marvell,armada385",
+		     "marvell,armada380";
 
 	soc {
 		internal-regs {
diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
index bfde99486a87..bcaaf8320c45 100644
--- a/arch/arm/boot/dts/marvell/dove-cubox.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -101,7 +101,7 @@
 		/* connect xtal input as source of pll0 and pll1 */
 		silabs,pll-source = <0 0>, <1 0>;
 
-		clkout0 {
+		clkout@0 {
 			reg = <0>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <0>;
@@ -109,7 +109,7 @@
 			silabs,pll-master;
 		};
 
-		clkout2 {
+		clkout@2 {
 			reg = <2>;
 			silabs,drive-strength = <8>;
 			silabs,multisynth-source = <1>;
diff --git a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
index 04f1ae1382e7..bc64348b8218 100644
--- a/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
+++ b/arch/arm/boot/dts/marvell/mmp2-brownstone.dts
@@ -28,7 +28,7 @@
 &twsi1 {
 	status = "okay";
 	pmic: max8925@3c {
-		compatible = "maxium,max8925";
+		compatible = "maxim,max8925";
 		reg = <0x3c>;
 		interrupts = <1>;
 		interrupt-parent = <&intcmux4>;
diff --git a/arch/arm/boot/dts/microchip/Makefile b/arch/arm/boot/dts/microchip/Makefile
index efde9546c8f4..0c45c8d17468 100644
--- a/arch/arm/boot/dts/microchip/Makefile
+++ b/arch/arm/boot/dts/microchip/Makefile
@@ -11,6 +11,7 @@ DTC_FLAGS_at91-sama5d2_xplained := -@
 DTC_FLAGS_at91-sama5d3_eds := -@
 DTC_FLAGS_at91-sama5d3_xplained := -@
 DTC_FLAGS_at91-sama5d4_xplained := -@
+DTC_FLAGS_at91-sama7g54_curiosity := -@
 DTC_FLAGS_at91-sama7g5ek := -@
 dtb-$(CONFIG_SOC_AT91RM9200) += \
 	at91rm9200ek.dtb \
@@ -87,6 +88,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d4ek.dtb \
 	at91-vinco.dtb
 dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g54_curiosity.dtb \
 	at91-sama7g5ek.dtb
 
 dtb-$(CONFIG_SOC_LAN966) += \
diff --git a/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
new file mode 100644
index 000000000000..4f609e9e510e
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/at91-sama7g54_curiosity.dts
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama7g54_curiosity.dts - Device Tree file for SAMA7G54 Curiosity Board
+ *
+ * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Mihai Sain <mihai.sain@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA7G54 Curiosity";
+	compatible = "microchip,sama7g54-curiosity", "microchip,sama7g5", "microchip,sama7";
+
+	aliases {
+		serial0 = &uart3;
+		i2c0 = &i2c10;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "user-button";
+			gpios = <&pioA PIN_PD19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_BOOT;
+			gpios = <&pioA PIN_PD14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&pioA PIN_PB15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>; /* 256 MiB DDR3L-1066 16-bit */
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand_default>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "nand: at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "nand: u-boot";
+					reg = <0x40000 0x100000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "nand: u-boot env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "nand: device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "nand: kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "nand: rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx10 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c10: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx10_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <256>;
+			vcc-supply = <&vdd_3v3>;
+		};
+
+		pmic@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <3300000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_xtal {
+	clock-frequency = <24000000>;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+	};
+};
+
+&pioA {
+	pinctrl_flx3_default: flx3-default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx10_default: flx10-default {
+		pinmux = <PIN_PC30__FLEXCOM10_IO0>,
+			 <PIN_PC31__FLEXCOM10_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PD19__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PD13__GPIO>,
+			 <PIN_PD14__GPIO>,
+			 <PIN_PB15__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1-an-default {
+		pinmux = <PIN_PC15__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2-an-default {
+		pinmux = <PIN_PC13__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_nand_default: nand-default {
+		pinmux = <PIN_PD9__D0>,
+			 <PIN_PD10__D1>,
+			 <PIN_PD11__D2>,
+			 <PIN_PC21__D3>,
+			 <PIN_PC22__D4>,
+			 <PIN_PC23__D5>,
+			 <PIN_PC24__D6>,
+			 <PIN_PD2__D7>,
+			 <PIN_PD3__NANDRDY>,
+			 <PIN_PD4__NCS3_NANDCS>,
+			 <PIN_PD5__NWE_NWR0_NANDWE>,
+			 <PIN_PD6__NRD_NANDOE>,
+			 <PIN_PD7__A21_NANDALE>,
+			 <PIN_PD8__A22_NANDCLE>;
+		bias-disable;
+		slew-rate = <0>;
+	};
+
+	pinctrl_qspi1_default: qspi1-default {
+		pinmux = <PIN_PB22__QSPI1_IO3>,
+			 <PIN_PB23__QSPI1_IO2>,
+			 <PIN_PB24__QSPI1_IO1>,
+			 <PIN_PB25__QSPI1_IO0>,
+			 <PIN_PB26__QSPI1_CS>,
+			 <PIN_PB27__QSPI1_SCK>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0-default {
+		pinmux = <PIN_PA0__SDMMC0_CK>,
+			 <PIN_PA1__SDMMC0_CMD>,
+			 <PIN_PA2__SDMMC0_RSTN>,
+			 <PIN_PA3__SDMMC0_DAT0>,
+			 <PIN_PA4__SDMMC0_DAT1>,
+			 <PIN_PA5__SDMMC0_DAT2>,
+			 <PIN_PA6__SDMMC0_DAT3>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1-default {
+		pinmux = <PIN_PB29__SDMMC1_CMD>,
+			 <PIN_PB30__SDMMC1_CK>,
+			 <PIN_PB31__SDMMC1_DAT0>,
+			 <PIN_PC0__SDMMC1_DAT1>,
+			 <PIN_PC1__SDMMC1_DAT2>,
+			 <PIN_PC2__SDMMC1_DAT3>,
+			 <PIN_PC4__SDMMC1_CD>;
+		bias-pull-up;
+		slew-rate = <0>;
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+/* M.2 slot for wireless card */
+&sdmmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+/* micro SD socket */
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&shdwc {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index 92f2c05c873f..af70eb8a3a02 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -121,6 +121,8 @@
 };
 
 &usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 
 	pinctrl-0 = <&pinctrl_usart3
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
index 5f4eaa618ab4..9618b8d965b0 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5ek.dtsi
@@ -39,6 +39,8 @@
 };
 
 &dbgu {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 73d570a17269..291540e5d81e 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -179,7 +179,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -202,7 +202,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -220,7 +220,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(8))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(9))>;
@@ -248,7 +248,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -271,7 +271,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -289,7 +289,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(10))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(11))>;
@@ -377,7 +377,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -399,7 +399,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(22))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(23))>;
@@ -426,7 +426,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -448,7 +448,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(24))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(25))>;
@@ -583,7 +583,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -605,7 +605,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(12))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(13))>;
@@ -632,7 +632,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -654,7 +654,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(14))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(15))>;
@@ -681,7 +681,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -703,7 +703,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(16))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(17))>;
@@ -730,7 +730,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -753,7 +753,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -771,7 +771,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(0))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(1))>;
@@ -798,7 +798,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -821,7 +821,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -839,7 +839,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(2))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(3))>;
@@ -866,7 +866,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -889,7 +889,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -907,7 +907,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(4))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(5))>;
@@ -934,7 +934,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -957,7 +957,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -975,7 +975,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(6))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(7))>;
@@ -1057,7 +1057,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1079,7 +1079,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(18))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(19))>;
@@ -1106,7 +1106,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
@@ -1128,7 +1128,7 @@
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(20))>,
-						<&dma0
+					       <&dma0
 						(AT91_XDMAC_DT_MEM_IF(0) |
 						 AT91_XDMAC_DT_PER_IF(1) |
 						 AT91_XDMAC_DT_PERID(21))>;
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..75778be126a3 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -698,7 +698,7 @@
 		};
 
 		flx0: flexcom@e1818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 			#address-cells = <1>;
@@ -714,7 +714,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
-					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(5)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -723,7 +723,7 @@
 		};
 
 		flx1: flexcom@e181c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe181c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 			#address-cells = <1>;
@@ -740,14 +740,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
-					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(7)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx3: flexcom@e1824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe1824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 			#address-cells = <1>;
@@ -763,7 +763,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
-					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(11)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -791,7 +791,7 @@
 		};
 
 		flx4: flexcom@e2018000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2018000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 			#address-cells = <1>;
@@ -807,7 +807,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
-					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(13)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -817,7 +817,7 @@
 		};
 
 		flx7: flexcom@e2024000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2024000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 			#address-cells = <1>;
@@ -833,7 +833,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 				clock-names = "usart";
 				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
-					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				       <&dma1 AT91_XDMAC_DT_PERID(19)>;
 				dma-names = "tx", "rx";
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -911,7 +911,7 @@
 		};
 
 		flx8: flexcom@e2818000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2818000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 			#address-cells = <1>;
@@ -928,14 +928,14 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
-					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(21)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx9: flexcom@e281c000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe281c000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 			#address-cells = <1>;
@@ -952,14 +952,38 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
-					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx10: flexcom@e2820000 {
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
+			reg = <0xe2820000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2820000 0x800>;
+			status = "disabled";
+
+			i2c10: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(25)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 		};
 
 		flx11: flexcom@e2824000 {
-			compatible = "atmel,sama5d2-flexcom";
+			compatible = "microchip,sama7g5-flexcom", "atmel,sama5d2-flexcom";
 			reg = <0xe2824000 0x200>;
 			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
 			#address-cells = <1>;
@@ -977,7 +1001,7 @@
 				#size-cells = <0>;
 				atmel,fifo-size = <32>;
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
-					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				       <&dma0 AT91_XDMAC_DT_PERID(27)>;
 				dma-names = "tx", "rx";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
index 60091bf7e48b..96972559253c 100644
--- a/arch/arm/boot/dts/nvidia/Makefile
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -39,5 +39,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra30-colibri-eval-v3.dtb \
+	tegra30-lg-p880.dtb \
+	tegra30-lg-p895.dtb \
 	tegra30-ouya.dtb \
 	tegra30-pegatron-chagall.dtb
diff --git a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
index a2ee37180200..8125c1b3e8d7 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra124-nyan.dtsi
@@ -338,6 +338,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
index 3924ee385dee..df98dc2a67b8 100644
--- a/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/nvidia/tegra124-venice2.dts
@@ -857,6 +857,7 @@
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
 			reg = <0>;
+			wakeup-source;
 
 			google,cros-ec-spi-msg-delay = <2000>;
 
diff --git a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
index a9342e04b14b..15f53babdc21 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-asus-nexus7-grouper-common.dtsi
@@ -915,6 +915,9 @@
 			reg = <0x1c>;
 
 			realtek,dmic1-data-pin = <1>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
 		};
 
 		nct72: temperature-sensor@4c {
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
new file mode 100644
index 000000000000..2f7754fd42a1
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus 4X HD P880";
+	compatible = "lg,p880", "nvidia,tegra30";
+
+	aliases {
+		mmc1 = &sdmmc3; /* uSD slot */
+		mmc2 = &sdmmc1; /* WiFi */
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			host-wlan-wake {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			uartb-rxd {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-txd {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* MicroSD pinmux */
+			sdmmc3-clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3-data {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			microsd-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			volume-up {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1110>;
+				syna,clip-y-high = <1973>;
+
+				touchscreen-inverted-y;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00050001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000004 0xC0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xC0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG 1GB K4P8G304EB FGC1 533MHz */
+			nvidia,ram-code = <0>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000001
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000001
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000001
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x000b0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000001
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00090220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(W, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2150000>;
+		energy-full-design-microwatt-hours = <8200000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p880",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus 4X HD MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
new file mode 100644
index 000000000000..e32fafc7f5e0
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p895.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-lg-x3.dtsi"
+
+/ {
+	model = "LG Optimus Vu P895";
+	compatible = "lg,p895", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* GNSS UART-B pinmux */
+			uartb-cts-rxd {
+				nvidia,pins = "uart2_cts_n_pj5",
+						"uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartb-rts-txd {
+				nvidia,pins = "uart2_rts_n_pj6",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-reset {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			memo-key {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-up {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			current-alert-irq {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-vdd {
+				nvidia,pins = "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* AUDIO pinmux */
+			sub-mic-ldo {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			usim-detect {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		touchscreen@20 {
+			rmi4-f11@11 {
+				syna,clip-x-high = <1535>;
+				syna,clip-y-high = <2047>;
+			};
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x77230303 0x001f0000 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000030
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000006 0x00000001 0x00000002 0x00000005
+					0x00000001 0x00000000 0x00000003 0x00000003
+					0x03030001 0x00090608 0x70040c09 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x0000000f 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-2 {
+			/* Hynix 1GB H9TCNNN8JDMMPR LPDDR2 533MHz */
+			nvidia,ram-code = <2>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000000
+					0x00000001 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x0000002f 0x00000000 0x0000000b
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000002 0x00000002
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x00000036 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000164 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-266500000 {
+				clock-frequency = <266500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020002>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000018>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000022 0x0000000b 0x00000004 0x00000005
+					0x00000005 0x00000001 0x00000007 0x00000004
+					0x00000004 0x00000002 0x00000002 0x00000000
+					0x00000002 0x00000005 0x00000002 0x0000000c
+					0x0000000b 0x000003ef 0x00000000 0x000000fb
+					0x00000001 0x00000001 0x00000004 0x00000000
+					0x00000001 0x00000009 0x00000026 0x00000026
+					0x00000004 0x0000000e 0x00000006 0x00000004
+					0x00000002 0x00000455 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x003200a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080002 0x00080002 0x00080002
+					0x00080002 0x000e0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000060 0x000a000a 0xa0f10000 0x00000000
+					0x00000000 0x800008ee 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	battery: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		charge-full-design-microamp-hours = <2080000>;
+		energy-full-design-microwatt-hours = <7700000>;
+		operating-range-celsius = <0 45>;
+	};
+
+	gpio-keys {
+		key-memo {
+			label = "Memo";
+			gpios = <&gpio TEGRA_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MEMO>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		led-power {
+			label = "power::white";
+			gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+
+			linux,default-trigger = "battery-charging";
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	regulator-lcd3v {
+		gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "lg,tegra-audio-max98089-p895",
+			     "nvidia,tegra-audio-max98089";
+		nvidia,model = "LG Optimus Vu MAX98089";
+
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
new file mode 100644
index 000000000000..909260a5d0fb
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-x3.dtsi
@@ -0,0 +1,1812 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen { };
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bed00000 {
+			compatible = "ramoops";
+			reg = <0xbed00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* WLAN SDIO pinmux */
+			sdmmc1-clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1-cmd {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wlan-reset {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wlan-host-wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GNSS UART-B pinmux */
+			gps-pwr-en {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-ldo-en {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gps-clk-ref {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Bluetooth UART-C pinmux */
+			uartc-cts-rxd {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uartc-rts-txd {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-reset {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-dev-wake {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bt-host-wake {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bt-pcm-dap4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* EMMC pinmux */
+			sdmmc4-clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-data {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4-reset {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1-i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2-i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			cam-i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			ddc-i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pwr-i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-i2c {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO keys pinmux */
+			power-key {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			volume-down {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			sen-vdd {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			proxi-vdd {
+				nvidia,pins = "spi2_miso_px1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sen-vio {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nct-irq {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			bat-irq {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			charger-irq {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mpu-irq {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			compass-irq {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			light-irq {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* LED pinmux */
+			backlight-en {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			flash-led-en {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			keypad-led {
+				nvidia,pins = "kb_row2_pr2",
+						"kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* NFC pinmux */
+			nfc-irq {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			nfc-ven {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			nfc-firm {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* DC pinmux */
+			lcd-pwr {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-wr-n {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-id {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd-pclk {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-blue {
+				nvidia,pins = "lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-green {
+				nvidia,pins = "lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd-rgb-red {
+				nvidia,pins = "lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bridge pinmux */
+			bridge-reset {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rgb-ic-en {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			bridge-clk {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			rgb-bridge {
+				nvidia,pins = "lcd_sdin_pz2",
+						"lcd_sdout_pn5",
+						"lcd_cs0_n_pn4",
+						"lcd_sck_pz4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Panel pinmux */
+			panel-reset {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			panel-vio {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Touchscreen pinmux */
+			touch-vdd {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-vio {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-irq-n {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			touch-rst-n {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch-maker-id {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MHL pinmux */
+			mhl-vio {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-rst-n {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			mhl-irq {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mhl-sel {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi-hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* AUDIO pinmux */
+			hp-detect {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp-hook {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ear-mic-en {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			audio-irq {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			audio-mclk {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap-i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* MUIC pinmux */
+			muic-irq {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			muic-dp2t {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			muic-usif {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ifx-usb-vbus-en {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcb-rev {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag-rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Camera pinmux */
+			cam-mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam-pmic-en {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-rst {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			front-cam-vio {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-rst {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-eprom-pr {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			rear-cam-vcm-pwdn {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Haptic pinmux */
+			haptic-en {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			haptic-osc {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Modem pinmux */
+			cp2ap-ack1-host-active {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp2ap-ack2-host-wakeup {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack2-suspend-req {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-ack1-slave-wakeup {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cp-kkp {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cp-crash-irq {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ap2cp-uarta-tx-ipc {
+				nvidia,pins = "pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ap2cp-uarta-rx-ipc {
+				nvidia,pins = "pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-cts-cp-rts {
+				nvidia,pins = "pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			fota-ap-rts-cp-cts {
+				nvidia,pins = "pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			modem-enable {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "hsi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			modem-reset {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap-i2s2 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive-i2c {
+				nvidia,pins = "drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-uart3 {
+				nvidia,pins = "drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive-gmi {
+				nvidia,pins = "drive_at3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* GNSS GSD5T */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 4) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply = <&vdd_3v3_vbat>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+
+		/* Console */
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	gen1_i2c: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v0_sen>;
+			dvdd-supply = <&vdd_1v8_vio>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		max98089: audio-codec@10 {
+			compatible = "maxim,max98089";
+			reg = <0x10>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			clock-names = "mclk";
+
+			assigned-clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+			assigned-clock-parents = <&tegra_car TEGRA30_CLK_EXTERN1>;
+		};
+
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		};
+
+		imu@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v0_sen>;
+			vddio-supply = <&vdd_1v8_sen>;
+
+			mount-matrix =  "1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+	};
+
+	gen2_i2c: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Synaptics RMI4 S3203B touchcreen */
+		touchscreen@20 {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x20>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			vdd-supply = <&vdd_3v0_touch>;
+			vio-supply = <&vdd_1v8_touch>;
+
+			syna,reset-delay-ms = <20>;
+			syna,startup-delay-ms = <200>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				syna,sensor-type = <1>;
+
+				syna,clip-x-low = <0>;
+				syna,clip-y-low = <0>;
+			};
+		};
+	};
+
+	cam_i2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		dw9714: coil@c {
+			compatible = "dongwoon,dw9714";
+			reg = <0x0c>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>;
+
+			vcc-supply = <&vcc_focuser>;
+		};
+
+		camera-pmic@7d {
+			compatible = "ti,lp8720";
+			reg = <0x7d>;
+
+			enable-gpios = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+
+			vt_1v2_front: ldo1 {
+				regulator-name = "vt_1v2_dig";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vt_2v7_front: ldo2 {
+				regulator-name = "vt_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			vdd_2v7_rear: ldo3 {
+				regulator-name = "8m_2v7_vana";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vio_1v8_rear: ldo4 {
+				regulator-name = "vio_1v8_cam";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc_focuser: ldo5 {
+				regulator-name = "8m_2v8_vcm";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vdd_1v2_rear: buck {
+				regulator-name = "8m_1v2_cam";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	pwr_i2c: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: max77663@1c {
+			compatible = "maxim,max77663";
+			reg = <0x1c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77663_default>;
+
+			max77663_default: pinmux {
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					drive-open-drain = <1>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_vbus>;
+				in-sd1-supply = <&vdd_5v0_vbus>;
+				in-sd2-supply = <&vdd_5v0_vbus>;
+				in-sd3-supply = <&vdd_5v0_vbus>;
+
+				in-ldo0-1-supply = <&vdd_1v8_vio>;
+				in-ldo2-supply   = <&vdd_3v3_vbat>;
+				in-ldo3-5-supply = <&vdd_3v3_vbat>;
+				in-ldo4-6-supply = <&vdd_3v3_vbat>;
+				in-ldo7-8-supply = <&vdd_1v8_vio>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8_vio: sd2 {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				sd3 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo0 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				avdd_3v3_periph: ldo2 {
+					regulator-name = "avdd_usb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_usd: ldo3 {
+					regulator-name = "vdd_sdmmc3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				avdd_1v8_hdmi_pll: ldo6 {
+					regulator-name = "avdd_osc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_1v2_mhl: ldo7 {
+					regulator-name = "vdd_1v2_mhl";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+			};
+		};
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17043";
+			reg = <0x36>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
+
+			monitored-battery = <&battery>;
+
+			maxim,alert-low-soc-level = <10>;
+			wakeup-source;
+		};
+
+		power-sensor@40 {
+			compatible = "ti,ina230";
+			reg = <0x40>;
+
+			vs-supply = <&vdd_3v0_sen>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v0_sen>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&gpio TEGRA_GPIO(Q, 7) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio TEGRA_GPIO(Q, 6) (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		/* DSI bridge */
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x1c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0x02>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		/* HIFI CODEC */
+		i2s@70080300 {		/* i2s0 */
+			status = "okay";
+		};
+
+		/* BASEBAND */
+		i2s@70080500 {		/* i2s2 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_vbat>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* BCM4330B1 37.4 MHz Class 1.5 ExtLNA */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+
+		non-removable;
+		mmc-ddr-1_8v;
+
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+	};
+
+	/* Micro USB */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&avdd_3v3_periph>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gps_refclk: clock-gps {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	gps_osc: clock-gps-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		clocks = <&gps_refclk>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(O, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-keypad {
+			label = "keypad::white";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_5v0_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_vbat: regulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbat";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_vbus>;
+	};
+
+	vdd_3v0_sen: regulator-sen3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_sensor";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_proxi: regulator-proxi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_proxi";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_sen: regulator-sen1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_sensor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_3v0_lcd: regulator-lcd3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v0_lcd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	iovcc_1v8_lcd: regulator-lcd1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "iovcc_1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_mhl: regulator-mhl1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8_mhl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_3v0_touch: regulator-touchpwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v0_touch";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vdd_1v8_touch: regulator-touchvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_touch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vcc_1v8_gps: regulator-gps {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_gps";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	vio_1v8_front: regulator-frontvio {
+		compatible = "regulator-fixed";
+		regulator-name = "vt_1v8_cam_vio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_vbat>;
+	};
+
+	sound {
+		nvidia,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Int Spk", "SPKL",
+			"Int Spk", "SPKR",
+			"Earpiece", "RECL",
+			"Earpiece", "RECR",
+			"INA1", "Mic Jack",
+			"MIC1", "MICBIAS",
+			"MICBIAS", "Internal Mic 1",
+			"MIC2", "Internal Mic 2";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&max98089>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(BB, 6) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution. The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * this device from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 50C until temperature drops to 49.8C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile
index a724d1a7a9a0..4052cad859fa 100644
--- a/arch/arm/boot/dts/nxp/imx/Makefile
+++ b/arch/arm/boot/dts/nxp/imx/Makefile
@@ -45,7 +45,9 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-mba53.dtb \
 	imx53-ppd.dtb \
 	imx53-qsb.dtb \
+	imx53-qsb-hdmi.dtb \
 	imx53-qsrb.dtb \
+	imx53-qsrb-hdmi.dtb \
 	imx53-sk-imx53.dtb \
 	imx53-sk-imx53-atm0700d4-lvds.dtb \
 	imx53-sk-imx53-atm0700d4-rgb.dtb \
@@ -54,6 +56,8 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-tx53-x13x.dtb \
 	imx53-usbarmory.dtb \
 	imx53-voipac-bsb.dtb
+imx53-qsb-hdmi-dtbs := imx53-qsb.dtb imx53-qsb-hdmi.dtbo
+imx53-qsrb-hdmi-dtbs := imx53-qsrb.dtb imx53-qsb-hdmi.dtbo
 dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-alti6p.dtb \
 	imx6dl-apf6dev.dtb \
@@ -118,6 +122,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-savageboard.dtb \
+	imx6dl-sielaff.dtb \
 	imx6dl-skov-revc-lt2.dtb \
 	imx6dl-skov-revc-lt6.dtb \
 	imx6dl-solidsense.dtb \
@@ -147,6 +152,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-yapp4-phoenix.dtb \
 	imx6dl-yapp4-ursa.dtb \
 	imx6q-apalis-eval.dtb \
+	imx6q-apalis-eval-v1.2.dtb \
 	imx6q-apalis-ixora.dtb \
 	imx6q-apalis-ixora-v1.1.dtb \
 	imx6q-apalis-ixora-v1.2.dtb \
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index e66eef87a7a4..058e9435524f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -54,7 +54,7 @@
 		#size-cells = <1>;
 	};
 
-	eth: eth@4,c00000 {
+	eth: ethernet@4,c00000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_eth>;
 		compatible = "davicom,dm9000";
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index 1ac10965fdfd..389ecb1ebf8f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -251,7 +251,7 @@
 			};
 		};
 
-		weim: weim@220000 {
+		weim: memory-controller@220000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx1-weim";
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index ec472695c71e..ec3ccc8f4095 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -568,7 +568,7 @@
 			status = "disabled";
 		};
 
-		weim: weim@d8002000 {
+		weim: memory-controller@d8002000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx27-weim";
diff --git a/arch/arm/boot/dts/nxp/imx/imx31.dtsi b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
index e1ae7c175f7d..00006c90d9a7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx31.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx31.dtsi
@@ -352,7 +352,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
 				reg = <0xb8002000 0x1000>;
 				clocks = <&clks 56>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 2d20e5541acc..442dc15677b8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -374,7 +374,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@b8002000 {
+			weim: memory-controller@b8002000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clocks = <&clks 0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
index c96d6311dfa7..4efce49022e4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51.dtsi
@@ -578,7 +578,7 @@
 				reg = <0x83fd8000 0x1000>;
 			};
 
-			weim: weim@83fda000 {
+			weim: memory-controller@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx51-weim";
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
new file mode 100644
index 000000000000..c84e9b052527
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx53-qsb-hdmi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * DT overlay for MCIMXHDMICARD as used with the iMX53 QSB or QSRB boards
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	/delete-node/ panel;
+
+	hdmi: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p2v>;
+	};
+};
+
+&display0 {
+	status = "okay";
+};
+
+&display0 {
+	port@1 {
+		display0_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	sii9022: bridge-hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&gpio3 31 IRQ_TYPE_LEVEL_LOW>;
+		iovcc-supply = <&reg_3p2v>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&tve {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
new file mode 100644
index 000000000000..7de8d5f26518
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-sielaff.dts
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sielaff i.MX6 Solo";
+	compatible = "sielaff,imx6dl-board", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: pwm-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm3 0 50000 0>;
+		brightness-levels = <0 0 64 88 112 136 184 232 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_backlight>;
+	};
+
+	cec {
+		compatible = "cec-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_cec>;
+		cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		hdmi-phandle = <&hdmi>;
+	};
+
+	enet_ref: clock-enet-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet-ref";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-0 {
+			gpios = <&gpio2 16 0>;
+			debounce-interval = <10>;
+			linux,code = <1>;
+		};
+
+		key-1 {
+			gpios = <&gpio3 27 0>;
+			debounce-interval = <10>;
+			linux,code = <2>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 4 0>;
+			debounce-interval = <10>;
+			linux,code = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-debug {
+			label = "debug-led";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	osc_eth_phy: clock-osc-eth-phy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc-eth-phy";
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_backlight>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		regulator-name = "backlight";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	/*
+	 * Set PTP clock to external instead of internal reference, as the
+	 * REF_CLK from the PHY is fed back into the i.MX6 and the GPR
+	 * register needs to be set accordingly (see mach-imx6q.c).
+	 */
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&enet_ref>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			clocks = <&osc_eth_phy>;
+			clock-names = "rmii-ref";
+			micrel,led-mode = <1>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <100>;
+			reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "key-out", "key-in",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"lan9500a-rst", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c4>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio5>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio5>;
+		irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds_out: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	disable-over-current;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb1@1 {
+		compatible = "usb4b4,6570";
+		reg = <1>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <12000000 0>;
+	};
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "host";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RD0__GPIO6_IO25	0x1b0b0	/* PMIC_IRQ */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x100b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b080
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b080
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b080
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001f8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_backlight: regbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: regusbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC		0x1b0b1
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x100b1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb1..c32ea040fecd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -117,17 +117,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
@@ -149,15 +141,30 @@
 				eth2: port@2 {
 					reg = <2>;
 					label = "eth2";
+					phy-mode = "internal";
 					phy-handle = <&phy_port2>;
 				};
 
 				eth1: port@3 {
 					reg = <3>;
 					label = "eth1";
+					phy-mode = "internal";
 					phy-handle = <&phy_port3>;
 				};
 			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port2: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy_port3: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
new file mode 100644
index 000000000000..15d4a98ee976
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2024 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6q-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board v1.2";
+	compatible = "toradex,apalis_imx6q-eval-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	reg_3v3_mmc: regulator-3v3-mmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_mmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_MMC";
+		startup-delay-us = <10000>;
+	};
+
+	reg_3v3_sd: regulator-3v3-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_sd>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SD";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can1: regulator-can1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "5V_SW_CAN1";
+		startup-delay-us = <10000>;
+	};
+
+	reg_can2: regulator-can2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "5V_SW_CAN2";
+		startup-delay-us = <10000>;
+	};
+
+	sound-carrier {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "apalis-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&nau8822_1a>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 */
+&i2c1 {
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nau8822>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <5000>;
+	};
+
+	/* Temperature Sensor */
+	temperature-sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		size = <256>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <4>;
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_3v3_mmc>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	vmmc-supply = <&reg_3v3_sd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_mmc: enable3v3mmcgrp {
+		fsl,pins = <
+			/* MMC1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_3v3_sd: enable3v3sdgrp {
+		fsl,pins = <
+			/* SD1_PWR_CTRL */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			/* CAN1_PWR_EN */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			/* CAN2_PWR_EN */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_nau8822: nau8822grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
index 3fc079dfd61e..e1077e2da5f4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dts
@@ -7,29 +7,13 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
+#include "imx6q-apalis-eval.dtsi"
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
 	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
 		     "fsl,imx6q";
 
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	reg_pcie_switch: regulator-pcie-switch {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -40,14 +24,6 @@
 		startup-delay-us = <100000>;
 		status = "okay";
 	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "3.3V_SW";
-	};
 };
 
 &can1 {
@@ -62,102 +38,22 @@
 
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
-	status = "okay";
-
+	/* PCIe Switch */
 	pcie-switch@58 {
 		compatible = "plx,pex8605";
 		reg = <0x58>;
 	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
 };
 
 &pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
 	vpcie-supply = <&reg_pcie_switch>;
 	status = "okay";
 };
 
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
 &sound_spdif {
 	status = "okay";
 };
 
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
 /* MMC1 */
 &usdhc1 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
new file mode 100644
index 000000000000..b6c45ad3f430
--- /dev/null
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2024 Toradex
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
index bfade7149080..a955c77cd499 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -41,6 +41,11 @@
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
@@ -187,7 +192,7 @@
 	status = "okay";
 
 	/* Pro baseboard model */
-	rtc@68 {
+	carrier_rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
index 0883ef99cded..e6017f9bf640 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard2.dtsi
@@ -41,6 +41,11 @@
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
+	aliases {
+		rtc0 = &pcf8523;
+		rtc1 = &snvs_rtc;
+	};
+
 	/* Will be filled by the bootloader */
 	memory@10000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
index 2731faede1cb..d59d5d0e1d19 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
@@ -13,10 +13,14 @@
 	aliases {
 		can0 = &can1;
 		can1 = &can2;
+		ethernet0 = &fec;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
 		mdio-gpio0 = &mdio;
 		nand = &gpmi;
 		rtc0 = &i2c_rtc;
 		rtc1 = &snvs;
+		switch0 = &switch;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
 	};
@@ -60,7 +64,7 @@
 		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
 			<&gpio1 22 GPIO_ACTIVE_HIGH>;
 
-		switch@0 {
+		switch: switch@0 {
 			compatible = "microchip,ksz8873";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_switch>;
@@ -73,13 +77,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				ports@0 {
+				lan1: ports@0 {
 					reg = <0>;
 					phy-mode = "internal";
 					label = "lan1";
 				};
 
-				ports@1 {
+				lan2: ports@1 {
 					reg = <1>;
 					phy-mode = "internal";
 					label = "lan2";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 81142c523fa8..8431b8a994f4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -1158,7 +1158,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6q-weim";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 815119c12bd4..5636fb3661e8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -141,8 +141,10 @@
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
 		vdd-supply = <&ldo1_reg>;
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
-		x-size = <1072>;
-		y-size = <1448>;
+		touchscreen-size-x = <1072>;
+		touchscreen-size-y = <1448>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
 	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
index 28111efb19a6..6aa61235e39e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl.dtsi
@@ -949,7 +949,7 @@
 				clocks = <&clks IMX6SL_CLK_DUMMY>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				reg = <0x021b8000 0x4000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index df3a375f0a3e..0de359d62a47 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -1107,7 +1107,7 @@
 				status = "disabled";
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 2ac40d69425b..f10f0525490b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -321,7 +321,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xfff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
index 875ae699c5cb..2ca18f3dad0a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
@@ -203,7 +203,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 &sai2 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
index 18cac19aa9b0..af337f18a266 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-imx6ull-opos6uldev.dtsi
@@ -156,7 +156,7 @@
 &tsc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 	measure-delay-time = <0xffff>;
 	pre-charge-time = <0xffff>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
index a27a7554c2e7..235aa676618b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi
@@ -370,7 +370,7 @@
 				};
 			};
 
-			tsc: tsc@2040000 {
+			tsc: touchscreen@2040000 {
 				compatible = "fsl,imx6ul-tsc";
 				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
@@ -538,6 +538,8 @@
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec2_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -638,6 +640,7 @@
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
@@ -855,7 +858,6 @@
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -897,6 +899,8 @@
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
 				fsl,magic-packet;
+				nvmem-cells = <&fec1_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -975,7 +979,7 @@
 				clocks = <&clks IMX6UL_CLK_MMDC_P0_IPG>;
 			};
 
-			weim: weim@21b8000 {
+			weim: memory-controller@21b8000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
@@ -1004,6 +1008,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				fec1_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
+
+				fec2_mac_addr: mac-addr@8e {
+					reg = <0x8e 6>;
+				};
 			};
 
 			csi: csi@21c4000 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
index 040421f9c970..5e39f8dc1351 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -14,10 +14,12 @@
  */
 
 /*
- * To use usdhc1 as SD card, the WiFi node must be deleted.
+ * To use usdhc1 as SD card, the WiFi node must be deleted. The associated
+ * pwrseq node is also deleted in order to ensure that GPIO H is released.
  * BT is also not available, so remove BT from the UART node.
  */
 /delete-node/ &brcmf;
+/delete-node/ &usdhc1_pwrseq;
 /delete-node/ &bluetooth;
 
 / {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
index 830b5a5064f2..a74f5273f9b3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-som.dtsi
@@ -52,7 +52,7 @@
 	};
 
 	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
-	/omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq {
+	usdhc1_pwrseq: usdhc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
 	};
@@ -273,7 +273,7 @@
 	pinctrl-names = "default";
 	pre-charge-time = <0xfff>;
 	touchscreen-average-samples = <32>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 };
 
 /* DHCOM UART1 */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
index 45315adfaa86..75486e1b0c15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcor-som.dtsi
@@ -28,10 +28,14 @@
 	/*
 	 * Due to the design as a solderable SOM, there are no capacitors
 	 * below the SoC, therefore higher voltages are required.
+	 * Due to CPU lifetime consideration of the SoC manufacturer and
+	 * the preferred area of operation in the industrial related
+	 * environment, set the maximum frequency for each DHCOM i.MX6ULL
+	 * to 792MHz, as with the industrial type.
 	 */
+	clock-frequency = <792000000>;
 	operating-points = <
 		/* kHz	uV */
-		900000	1275000
 		792000	1250000 /* Voltage increased */
 		528000	1175000
 		396000	1025000
@@ -39,7 +43,6 @@
 	>;
 	fsl,soc-operating-points = <
 		/* KHz	uV */
-		900000	1250000
 		792000	1250000 /* Voltage increased */
 		528000	1175000
 		396000	1175000
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
index 2bccd45e9fc2..8a1776067ecc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull.dtsi
@@ -75,7 +75,7 @@
 				clocks = <&clks IMX6UL_CLK_DUMMY>;
 			};
 
-			iomuxc_snvs: iomuxc-snvs@2290000 {
+			iomuxc_snvs: pinctrl@2290000 {
 				compatible = "fsl,imx6ull-iomuxc-snvs";
 				reg = <0x02290000 0x4000>;
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index 3df6dff7734a..1235a71c6abe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -18,6 +18,8 @@
 		mmc0 = &usdhc3;
 		mmc1 = &usdhc1;
 		/delete-property/ mmc2;
+		rtc0 = &ds1339;
+		rtc1 = &snvs_rtc;
 	};
 
 	beeper {
@@ -32,11 +34,18 @@
 	gpio_buttons: gpio-keys {
 		compatible = "gpio-keys";
 
+		/*
+		 * NOTE: These buttons are attached to a GPIO-expander.
+		 * Enabling wakeup-source, enables wakeup on all inputs.
+		 * If PE_GPIO[3..6] are used as inputs, they cause a
+		 * wakeup as well.
+		 */
 		button-0 {
 			/* #SWITCH_A */
 			label = "S11";
 			linux,code = <KEY_1>;
 			gpios = <&pca9555 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button-1 {
@@ -44,6 +53,7 @@
 			label = "S12";
 			linux,code = <KEY_2>;
 			gpios = <&pca9555 14 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button-2 {
@@ -51,6 +61,7 @@
 			label = "S13";
 			linux,code = <KEY_3>;
 			gpios = <&pca9555 15 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -171,6 +182,14 @@
 		regulator-always-on;
 	};
 
+	reg_vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
 		model = "imx-audio-tlv320aic32x4";
@@ -198,9 +217,9 @@
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_ss0>;
 	cs-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>, <&gpio4 1 GPIO_ACTIVE_LOW>,
-		   <&gpio4 2 GPIO_ACTIVE_LOW>;
+		   <&gpio4 2 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -214,8 +233,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec1_pwdn>;
 	phy-handle = <&ethphy1_0>;
 	fsl,magic-packet;
@@ -228,10 +245,15 @@
 		ethphy1_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
@@ -290,13 +312,17 @@
 	lm75: temperature-sensor@49 {
 		compatible = "national,lm75";
 		reg = <0x49>;
+		vs-supply = <&reg_vcc_3v3>;
 	};
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_recovery>;
+	scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 11 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	tlv320aic32x4: audio-codec@18 {
@@ -319,13 +345,17 @@
 		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
 	};
 };
 
 &i2c3 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -334,213 +364,213 @@
 	pinctrl-0 = <&pinctrl_hog_mba7_1>;
 
 	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c>,
+			<MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74>,
+			<MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74>,
+			<MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74>,
+			<MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74>,
+			<MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74>;
+	};
+
+	pinctrl_ecspi1_ss0: ecspi1ss0grp {
 		fsl,pins = <
-			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO		0x7c
-			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI		0x74
-			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK		0x74
-			MX7D_PAD_UART1_RX_DATA__GPIO4_IO0		0x74
-			MX7D_PAD_UART1_TX_DATA__GPIO4_IO1		0x74
-			MX7D_PAD_UART2_RX_DATA__GPIO4_IO2		0x74
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19			0x74
 		>;
 	};
 
 	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c
-			MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74
-			MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74
-			MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0			0x74
-		>;
+		fsl,pins =
+			<MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO		0x7c>,
+			<MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI		0x74>,
+			<MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK		0x74>,
+			<MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0		0x74>;
 	};
 
 	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02
-			MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x00
-			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x71
-			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x71
-			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x71
-			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x71
-			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x71
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71
-			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x79
-			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x79
-			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x79
-			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x79
-			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x79
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x02>,
+			<MX7D_PAD_GPIO1_IO11__ENET1_MDC				0x00>,
+			<MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x71>,
+			<MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x71>,
+			<MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x79>,
+			<MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet1_phy: enet1phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_ENET1_COL__GPIO7_IO15		0x40000070
+			<MX7D_PAD_ENET1_COL__GPIO7_IO15				0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x40000078
-		>;
+			<MX7D_PAD_GPIO1_IO09__GPIO1_IO9				0x40000078>;
 	};
 
 	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a
-			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52
-		>;
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x52>;
 	};
 
 	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52
-		>;
+		fsl,pins =
+			<MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x5a>,
+			<MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x52>;
 	};
 
 	pinctrl_hog_mba7_1: hogmba71grp {
-		fsl,pins = <
+		fsl,pins =
 			/* Limitation: WDOG2_B / WDOG2_RESET not usable */
-			MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074
+			<MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13	0x4000007c>,
+			<MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x40000074>,
 			/* #BOOT_EN */
-			MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010
-		>;
+			<MX7D_PAD_UART2_TX_DATA__GPIO4_IO3	0x40000010>;
 	};
 
 	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078
-			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c2_recovery: i2c2recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C2_SCL__GPIO4_IO10		0x40000078>,
+			<MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x40000078>;
 	};
 
 	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078
-			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__I2C3_SCL		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__I2C3_SDA		0x40000078>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x40000078>,
+			<MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x40000078>;
 	};
 
 	pinctrl_pca9555: pca95550grp {
-		fsl,pins = <
-			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78
-		>;
+		fsl,pins =
+			<MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x78>;
 	};
 
 	pinctrl_sai1: sai1grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11
-			MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c
-			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c
-			MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c
-
-			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c
-			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14
-		>;
+		fsl,pins =
+			<MX7D_PAD_SAI1_MCLK__SAI1_MCLK		0x11>,
+			<MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1c>,
+			<MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC	0x1c>,
+
+			<MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1c>,
+			<MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x14>,
+			<MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x14>;
 	};
 
 	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e
-			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76
-			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76
-			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e
-		>;
+		fsl,pins =
+			<MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x7e>,
+			<MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x76>,
+			<MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x76>,
+			<MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x7e>;
 	};
 
 	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e
-			MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76
-			MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76
-			MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e
-		>;
+		fsl,pins =
+			<MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX	0x7e>,
+			<MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX	0x76>,
+			<MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS	0x76>,
+			<MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS	0x7e>;
 	};
 
 	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX7D_PAD_I2C4_SCL__UART5_DCE_RX		0x7e
-			MX7D_PAD_I2C4_SDA__UART5_DCE_TX		0x76
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C4_SCL__UART5_DCE_RX	0x7e>,
+			<MX7D_PAD_I2C4_SDA__UART5_DCE_TX	0x76>;
 	};
 
 	pinctrl_uart6: uart6grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d
-			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75
-			MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75
-			MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d
-		>;
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA08__UART6_DCE_RX	0x7d>,
+			<MX7D_PAD_EPDC_DATA09__UART6_DCE_TX	0x75>,
+			<MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS	0x75>,
+			<MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS	0x7d>;
 	};
 
 	pinctrl_uart7: uart7grp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e
-			MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76
-			MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA12__UART7_DCE_RX	0x7e>,
+			<MX7D_PAD_EPDC_DATA13__UART7_DCE_TX	0x76>,
+			<MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS	0x76>,
 			/* Limitation: RTS is not connected */
-			MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e
-		>;
+			<MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS	0x7e>;
 	};
 
-	pinctrl_usdhc1_gpio: usdhc1grp_gpio {
-		fsl,pins = <
+	pinctrl_usdhc1_gpio: usdhc1_gpiogrp {
+		fsl,pins =
 			/* WP */
-			MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c
+			<MX7D_PAD_SD1_WP__GPIO5_IO1		0x7c>,
 			/* CD */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c
+			<MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x7c>,
 			/* VSELECT */
-			MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59
-		>;
+			<MX7D_PAD_GPIO1_IO08__SD1_VSELECT	0x59>;
 	};
 
 	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5e
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK		0x57
-			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5e>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5e>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5e>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5e>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5e>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5a>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD1_CMD__SD1_CMD		0x5b>,
+			<MX7D_PAD_SD1_CLK__SD1_CLK		0x57>,
+			<MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b>,
+			<MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b>,
+			<MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b>,
+			<MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
+		fsl,pins =
 			/* LCD_CONTRAST */
-			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50
-		>;
+			<MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT	0x50>;
 	};
 
 	pinctrl_usbotg1: usbotg1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x59>;
 	};
 
 	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
 	};
 };
 
@@ -560,6 +590,10 @@
 	status = "okay";
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -605,6 +639,7 @@
 };
 
 &usbh {
+	disable-over-current;
 	status = "okay";
 };
 
@@ -630,6 +665,8 @@
 	vmmc-supply = <&reg_sd1_vmmc>;
 	bus-width = <4>;
 	no-1-8-v;
+	no-sdio;
+	no-emmc;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 3fc3130f9def..028961eb7108 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -30,8 +30,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -109,7 +112,7 @@
 			};
 
 			vgen4_reg: v33 {
-				regulator-min-microvolt = <2850000>;
+				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
@@ -135,7 +138,7 @@
 	};
 
 	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
-	se97b: temperature-sensor-eeprom@1e {
+	se97b: temperature-sensor@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
 	};
@@ -143,15 +146,18 @@
 	/* ST M24C64 */
 	m24c64: eeprom@50 {
 		compatible = "atmel,24c64";
+		read-only;
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&vgen4_reg>;
 		status = "okay";
 	};
 
 	at24c02: eeprom@56 {
-		compatible = "atmel,24c02";
+		compatible = "nxp,se97b", "atmel,24c02";
 		reg = <0x56>;
 		pagesize = <16>;
+		vcc-supply = <&vgen4_reg>;
 		status = "okay";
 	};
 
@@ -163,91 +169,89 @@
 
 &iomuxc {
 	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078
-			MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078
-		>;
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__I2C1_SDA	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__I2C1_SCL	0x40000078>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins =
+			<MX7D_PAD_I2C1_SDA__GPIO4_IO9	0x40000078>,
+			<MX7D_PAD_I2C1_SCL__GPIO4_IO8	0x40000078>;
 	};
 
 	pinctrl_pmic1: pmic1grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x4000005C>;
 	};
 
 	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
-			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
-			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
-			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
-			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
-			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
-			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
-		>;
+		fsl,pins =
+			<MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A>,
+			<MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A>,
+			<MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A>,
+			<MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A>,
+			<MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11>,
+			<MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54>,
+			<MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54>;
 	};
 
 	pinctrl_qspi_reset: qspi_resetgrp {
-		fsl,pins = <
+		fsl,pins =
 			/* #QSPI_RESET */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
-		>;
+			<MX7D_PAD_EPDC_DATA04__GPIO2_IO4	0x52>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
-			MX7D_PAD_SD3_CLK__SD3_CLK		0x56
-			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
-			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
-			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
-			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
-			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
-			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
-			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
-			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
-			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
-		>;
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD		0x59>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK		0x56>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE	0x19>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5a
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a
-		>;
+	pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5a>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5a>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5a>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5a>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5a>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5a>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5a>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5a>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5a>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1a>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
-		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD               0x5b
-			MX7D_PAD_SD3_CLK__SD3_CLK               0x51
-			MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b
-			MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b
-			MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b
-			MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b
-			MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b
-			MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b
-			MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b
-			MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b
-			MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b
-		>;
+	pinctrl_usdhc3_200mhz: usdhc3_200mhzgrp {
+		fsl,pins =
+			<MX7D_PAD_SD3_CMD__SD3_CMD               0x5b>,
+			<MX7D_PAD_SD3_CLK__SD3_CLK               0x51>,
+			<MX7D_PAD_SD3_DATA0__SD3_DATA0           0x5b>,
+			<MX7D_PAD_SD3_DATA1__SD3_DATA1           0x5b>,
+			<MX7D_PAD_SD3_DATA2__SD3_DATA2           0x5b>,
+			<MX7D_PAD_SD3_DATA3__SD3_DATA3           0x5b>,
+			<MX7D_PAD_SD3_DATA4__SD3_DATA4           0x5b>,
+			<MX7D_PAD_SD3_DATA5__SD3_DATA5           0x5b>,
+			<MX7D_PAD_SD3_DATA6__SD3_DATA6           0x5b>,
+			<MX7D_PAD_SD3_DATA7__SD3_DATA7           0x5b>,
+			<MX7D_PAD_SD3_STROBE__SD3_STROBE         0x1b>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_wdog1: wdog1grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x30>;
 	};
 };
 
@@ -265,10 +269,6 @@
 	};
 };
 
-&sdma {
-	status = "okay";
-};
-
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -278,6 +278,8 @@
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	non-removable;
+	no-sd;
+	no-sdio;
 	vmmc-supply = <&vgen4_reg>;
 	vqmmc-supply = <&sw2_reg>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
index 32bf9fa9d00e..0443faa3dfae 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-mba7.dts
@@ -21,8 +21,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
 	phy-supply = <&reg_fec2_pwdn>;
 	phy-handle = <&ethphy2_0>;
 	fsl,magic-packet;
@@ -35,59 +33,85 @@
 		ethphy2_0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet2_phy>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <500>;
 		};
 	};
 };
 
+&gpio2 {
+	pcie-dis-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-dis";
+	};
+
+	pcie-rst-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "pcie-rst";
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_mba7_1>;
+	pinctrl-0 = <&pinctrl_hog_mba7_1>, <&pinctrl_hog_pcie>;
 
 	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02
-			MX7D_PAD_SD2_WP__ENET2_MDC			0x00
-			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71
-			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71
-			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71
-			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71
-			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71
-			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71
-			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79
-			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79
-			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79
-			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79
-			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79
-			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x79
+		fsl,pins =
+			<MX7D_PAD_SD2_CD_B__ENET2_MDIO			0x02>,
+			<MX7D_PAD_SD2_WP__ENET2_MDC			0x00>,
+			<MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x71>,
+			<MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x71>,
+			<MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x71>,
+			<MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x71>,
+			<MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x71>,
+			<MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x71>,
+			<MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x79>,
+			<MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x79>,
+			<MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x79>,
+			<MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x79>,
+			<MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x79>,
+			<MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL	0x79>;
+	};
+
+	pinctrl_enet2_phy: enet2phygrp {
+		fsl,pins =
 			/* Reset: SION, 100kPU, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070
+			<MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x40000070>,
 			/* INT/PWDN: SION, 100kPU, HYS, SRE_FAST, DSE_X1 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078
-		>;
+			<MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x40000078>;
 	};
 
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			/* #pcie_wake */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70
+	pinctrl_hog_pcie: hogpciegrp {
+		fsl,pins =
 			/* #pcie_rst */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70
+			<MX7D_PAD_SD2_CLK__GPIO5_IO12			0x70>,
 			/* #pcie_dis */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70
-		>;
+			<MX7D_PAD_EPDC_BDR1__GPIO2_IO29			0x70>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			/* #pcie_wake */
+			<MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30		0x70>;
 	};
 };
 
 &iomuxc_lpsr {
 	pinctrl_usbotg2: usbotg2grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59
-		>;
+		fsl,pins =
+			<MX7D_PAD_LPSR_GPIO1_IO06__USB_OTG2_OC	0x5c>,
+			<MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x59>;
 	};
 };
 
@@ -98,16 +122,14 @@
 	/* probe deferral not supported */
 	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usbotg2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg2>;
 	vbus-supply = <&reg_usb_otg2_vbus>;
-	srp-disable;
-	hnp-disable;
-	adp-disable;
+	disable-over-current;
 	dr_mode = "host";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index d471cc5efa94..e86998ca77d6 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -808,7 +808,9 @@
 			dr_mode = "host";
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
+			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			snps,host-vbus-glitches;
 		};
 
 		pcie@3400000 {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
index 9ebb7371e235..330d3aff6b6c 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-evk.dts
@@ -198,7 +198,7 @@
 		clocks = <&saif0>;
 	};
 
-	at24@51 {
+	eeprom@51 {
 		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x51>;
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index 9cc1e14e6cd0..6478a39b3be5 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8926-microsoft-superman-lte.dtb \
 	qcom-msm8926-microsoft-tesla.dtb \
 	qcom-msm8926-motorola-peregrine.dtb \
+	qcom-msm8926-samsung-matisselte.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
index 0a1fd5eb3c6d..a70de21bf139 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts
@@ -7,6 +7,7 @@
 
 #include "qcom-msm8226.dtsi"
 #include "pm8226.dtsi"
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 
 /delete-node/ &adsp_region;
 
@@ -56,6 +57,29 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlan_regulator_default_state>;
 	};
+
+	pwm_vibrator: pwm {
+		compatible = "clk-pwm";
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+
+		pinctrl-0 = <&vibrator_clk_default_state>;
+		pinctrl-names = "default";
+
+		#pwm-cells = <2>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&pwm_vibrator 0 10000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&pm8226_l28>;
+		enable-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default_state>;
+		pinctrl-names = "default";
+	};
 };
 
 &adsp {
@@ -330,6 +354,20 @@
 		};
 	};
 
+	vibrator_clk_default_state: vibrator-clk-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_en_default_state: vibrator-en-default-state {
+		pins = "gpio62";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	wlan_hostwake_default_state: wlan-hostwake-default-state {
 		pins = "gpio37";
 		function = "gpio";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
index cffc069712b2..da3be658e822 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts
@@ -5,142 +5,13 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
-#include "qcom-msm8226.dtsi"
-#include "pm8226.dtsi"
-
-/delete-node/ &adsp_region;
-/delete-node/ &smem_region;
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
 
 / {
 	model = "Samsung Galaxy Tab 4 10.1";
 	compatible = "samsung,matisse-wifi", "qcom,apq8026";
 	chassis-type = "tablet";
 
-	aliases {
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_2; /* SDC2 SD card slot */
-		display0 = &framebuffer0;
-	};
-
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		stdout-path = "display0";
-
-		framebuffer0: framebuffer@3200000 {
-			compatible = "simple-framebuffer";
-			reg = <0x03200000 0x800000>;
-			width = <1280>;
-			height = <800>;
-			stride = <(1280 * 3)>;
-			format = "r8g8b8";
-		};
-	};
-
-	gpio-hall-sensor {
-		compatible = "gpio-keys";
-
-		event-hall-sensor {
-			label = "Hall Effect Sensor";
-			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <15>;
-			linux,can-disable;
-			wakeup-source;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		key-home {
-			label = "Home";
-			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOMEPAGE>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	i2c-backlight {
-		compatible = "i2c-gpio";
-		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-
-		pinctrl-0 = <&backlight_i2c_default_state>;
-		pinctrl-names = "default";
-
-		i2c-gpio,delay-us = <4>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		backlight@2c {
-			compatible = "ti,lp8556";
-			reg = <0x2c>;
-
-			dev-ctrl = /bits/ 8 <0x80>;
-			init-brt = /bits/ 8 <0x3f>;
-
-			pwms = <&backlight_pwm 0 100000>;
-			pwm-names = "lp8556";
-
-			rom-a0h {
-				rom-addr = /bits/ 8 <0xa0>;
-				rom-val = /bits/ 8 <0x44>;
-			};
-
-			rom-a1h {
-				rom-addr = /bits/ 8 <0xa1>;
-				rom-val = /bits/ 8 <0x6c>;
-			};
-
-			rom-a5h {
-				rom-addr = /bits/ 8 <0xa5>;
-				rom-val = /bits/ 8 <0x24>;
-			};
-		};
-	};
-
-	backlight_pwm: pwm {
-		compatible = "clk-pwm";
-		#pwm-cells = <2>;
-		clocks = <&mmcc CAMSS_GP0_CLK>;
-		pinctrl-0 = <&backlight_pwm_default_state>;
-		pinctrl-names = "default";
-	};
-
-	reg_tsp_1p8v: regulator-tsp-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "tsp_1p8v";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsp_en_default_state>;
-	};
-
 	reg_tsp_3p3v: regulator-tsp-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "tsp_3p3v";
@@ -153,74 +24,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsp_en1_default_state>;
 	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@3200000 {
-			reg = <0x03200000 0x800000>;
-			no-map;
-		};
-
-		mpss@8400000 {
-			reg = <0x08400000 0x1f00000>;
-			no-map;
-		};
-
-		mba@a300000 {
-			reg = <0x0a300000 0x100000>;
-			no-map;
-		};
-
-		reserved@cb00000 {
-			reg = <0x0cb00000 0x700000>;
-			no-map;
-		};
-
-		wcnss@d200000 {
-			reg = <0x0d200000 0x700000>;
-			no-map;
-		};
-
-		adsp_region: adsp@d900000 {
-			reg = <0x0d900000 0x1800000>;
-			no-map;
-		};
-
-		venus@f100000 {
-			reg = <0x0f100000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0x0fa00000 0x100000>;
-			no-map;
-		};
-
-		reserved@fb00000 {
-			reg = <0x0fb00000 0x260000>;
-			no-map;
-		};
-
-		rfsa@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
-		};
-
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
-};
-
-&adsp {
-	status = "okay";
 };
 
 &blsp1_i2c2 {
@@ -243,21 +46,6 @@
 	};
 };
 
-&blsp1_i2c4 {
-	status = "okay";
-
-	muic: usb-switch@25 {
-		compatible = "siliconmitus,sm5502-muic";
-		reg = <0x25>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&muic_int_default_state>;
-	};
-};
-
 &blsp1_i2c5 {
 	status = "okay";
 
@@ -268,6 +56,13 @@
 		interrupt-parent = <&tlmm>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 
+		linux,keycodes = <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_RESERVED>,
+				 <KEY_APPSELECT>,
+				 <KEY_BACK>;
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsp_int_rst_default_state>;
 
@@ -278,242 +73,19 @@
 	};
 };
 
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pm8226-regulators";
-
-		pm8226_s3: s3 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_s4: s4 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_s5: s5 {
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-
-		pm8226_l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-
-		pm8226_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l3: l3 {
-			regulator-min-microvolt = <750000>;
-			regulator-max-microvolt = <1337500>;
-			regulator-always-on;
-		};
-
-		pm8226_l4: l4 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l5: l5 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-
-		pm8226_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l7: l7 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <1850000>;
-		};
-
-		pm8226_l8: l8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		pm8226_l9: l9 {
-			regulator-min-microvolt = <2050000>;
-			regulator-max-microvolt = <2050000>;
-		};
-
-		pm8226_l10: l10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l14: l14 {
-			regulator-min-microvolt = <2750000>;
-			regulator-max-microvolt = <2750000>;
-		};
-
-		pm8226_l15: l15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l16: l16 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3350000>;
-		};
-
-		pm8226_l17: l17 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-
-			regulator-system-load = <200000>;
-			regulator-allow-set-load;
-			regulator-always-on;
-		};
-
-		pm8226_l18: l18 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l19: l19 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l20: l20 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		pm8226_l21: l21 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_l22: l22 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		pm8226_l23: l23 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		pm8226_l24: l24 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1350000>;
-		};
-
-		pm8226_l25: l25 {
-			regulator-min-microvolt = <1775000>;
-			regulator-max-microvolt = <2125000>;
-		};
-
-		pm8226_l26: l26 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		pm8226_l27: l27 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8226_l28: l28 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8226_lvs1: lvs1 {};
-	};
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8226_l17>;
-	vqmmc-supply = <&pm8226_l6>;
-
-	bus-width = <8>;
-	non-removable;
-
-	status = "okay";
+&pm8226_l3 {
+	regulator-max-microvolt = <1337500>;
 };
 
-&sdhc_2 {
-	vmmc-supply = <&pm8226_l18>;
-	vqmmc-supply = <&pm8226_l21>;
-
-	bus-width = <4>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
+&pm8226_s4 {
+	regulator-max-microvolt = <1800000>;
 };
 
 &tlmm {
-	accel_int_default_state: accel-int-default-state {
-		pins = "gpio54";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_i2c_default_state: backlight-i2c-default-state {
-		pins = "gpio20", "gpio21";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	backlight_pwm_default_state: backlight-pwm-default-state {
-		pins = "gpio33";
-		function = "gp0_clk";
-	};
-
-	muic_int_default_state: muic-int-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tsp_en_default_state: tsp-en-default-state {
-		pins = "gpio31";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
 	tsp_en1_default_state: tsp-en1-default-state {
 		pins = "gpio73";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
-
-	tsp_int_rst_default_state: tsp-int-rst-default-state {
-		pins = "gpio17";
-		function = "gpio";
-		drive-strength = <10>;
-		bias-pull-up;
-	};
-};
-
-&usb {
-	extcon = <&muic>, <&muic>;
-	status = "okay";
-};
-
-&usb_hs_phy {
-	extcon = <&muic>;
-	v1p8-supply = <&pm8226_l10>;
-	v3p3-supply = <&pm8226_l20>;
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 3faf57035d54..9a5ba978775a 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -190,7 +190,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	clocks {
@@ -244,7 +244,7 @@
 
 		modem_smsm: modem@1 {
 			reg = <1>;
-			interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -252,7 +252,7 @@
 
 		q6_smsm: q6@2 {
 			reg = <2>;
-			interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -260,7 +260,7 @@
 
 		wcnss_smsm: wcnss@3 {
 			reg = <3>;
-			interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -268,7 +268,7 @@
 
 		dsps_smsm: dsps@4 {
 			reg = <4>;
-			interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>;
 
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -299,7 +299,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&ps_hold>;
@@ -321,9 +321,9 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
 				     "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <27000000>;
 			cpu-offset = <0x80000>;
@@ -365,28 +365,44 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: power-controller@2089000 {
+		saw0: power-manager@2089000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw1: power-controller@2099000 {
+		saw1: power-manager@2099000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw2: power-controller@20a9000 {
+		saw2: power-manager@20a9000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw2_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw3: power-controller@20b9000 {
+		saw3: power-manager@20b9000 {
 			compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
 			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw3_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
 		sps_sic_non_secure: sps-sic-non-secure@12100000 {
@@ -411,7 +427,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12450000 0x100>,
 				      <0x12400000 0x03>;
-				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -423,7 +439,7 @@
 				pinctrl-1 = <&i2c1_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -452,7 +468,7 @@
 				pinctrl-0 = <&i2c2_pins>;
 				pinctrl-1 = <&i2c2_pins_sleep>;
 				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -539,7 +555,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x100>,
 				      <0x1a200000 0x03>;
-				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -548,7 +564,7 @@
 			gsbi5_spi: spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&spi5_default>;
 				pinctrl-1 = <&spi5_sleep>;
 				pinctrl-names = "default", "sleep";
@@ -575,7 +591,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16540000 0x100>,
 				      <0x16500000 0x03>;
-				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -611,7 +627,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
-				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -908,7 +924,7 @@
 		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -936,7 +952,7 @@
 		sdcc4bam: dma-controller@121c2000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC4_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -965,7 +981,7 @@
 		sdcc1bam: dma-controller@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
index 2b1f9d0fb510..8204e64d9a97 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
@@ -629,30 +629,29 @@
 			};
 		};
 
-		saw0: power-controller@f9089000 {
+		saw0: power-manager@f9089000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw1: power-controller@f9099000 {
+		saw1: power-manager@f9099000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw2: power-controller@f90a9000 {
+		saw2: power-manager@f90a9000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw3: power-controller@f90b9000 {
+		saw3: power-manager@f90b9000 {
 			compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 		};
 
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,apq8084-saw2-v2.1-l2", "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
-			regulator;
 		};
 
 		acc0: power-manager@f9088000 {
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
index 0505270cf508..f7ac8f9d0b6f 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi
@@ -27,87 +27,83 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		pinctrl@1000000 {
-			serial_pins: serial_pinmux {
-				mux {
-					pins = "gpio60", "gpio61";
-					function = "blsp_uart0";
-					bias-disable;
-				};
-			};
-
-			spi_0_pins: spi_0_pinmux {
-				pinmux {
-					function = "blsp_spi0";
-					pins = "gpio55", "gpio56", "gpio57";
-				};
-				pinmux_cs {
-					function = "gpio";
-					pins = "gpio54";
-				};
-				pinconf {
-					pins = "gpio55", "gpio56", "gpio57";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				pinconf_cs {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-disable;
-					output-high;
-				};
-			};
-		};
+&prng {
+	status = "okay";
+};
 
-		blsp_dma: dma-controller@7884000 {
-			status = "okay";
+&tlmm {
+	serial_pins: serial_pinmux {
+		mux {
+			pins = "gpio60", "gpio61";
+			function = "blsp_uart0";
+			bias-disable;
 		};
+	};
 
-		spi@78b5000 {
-			pinctrl-0 = <&spi_0_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
-			mx25l25635e@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0>;
-				compatible = "mx25l25635e";
-				spi-max-frequency = <24000000>;
-			};
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio55", "gpio56", "gpio57";
 		};
-
-		serial@78af000 {
-			pinctrl-0 = <&serial_pins>;
-			pinctrl-names = "default";
-			status = "okay";
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio54";
 		};
-
-		cryptobam: dma-controller@8e04000 {
-			status = "okay";
+		pinconf {
+			pins = "gpio55", "gpio56", "gpio57";
+			drive-strength = <12>;
+			bias-disable;
 		};
-
-		crypto@8e3a000 {
-			status = "okay";
+		pinconf_cs {
+			pins = "gpio54";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
 		};
+	};
+};
 
-		watchdog@b017000 {
-			status = "okay";
-		};
+&blsp_dma {
+	status = "okay";
+};
 
-		wifi@a000000 {
-			status = "okay";
-		};
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
-		wifi@a800000 {
-			status = "okay";
-		};
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <24000000>;
 	};
 };
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi0 {
+	status = "okay";
+};
+
+&wifi1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f989bd741cd1..681cb3fc8085 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -162,10 +162,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <48000000>;
 		always-on;
 	};
@@ -350,34 +350,29 @@
 			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		saw0: regulator@b089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@b089000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw1: regulator@b099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@b099000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw2: regulator@b0a9000 {
-			compatible = "qcom,saw2";
+		saw2: power-manager@b0a9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw3: regulator@b0b9000 {
-			compatible = "qcom,saw2";
+		saw3: power-manager@b0b9000 {
+			compatible = "qcom,ipq4019-saw2-cpu", "qcom,saw2";
 			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
-		saw_l2: regulator@b012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@b012000 {
+			compatible = "qcom,ipq4019-saw2-l2", "qcom,saw2";
 			reg = <0xb012000 0x1000>;
-			regulator;
 		};
 
 		blsp1_uart1: serial@78af000 {
@@ -684,7 +679,7 @@
 			clocks = <&gcc GCC_USB2_MASTER_CLK>,
 				 <&gcc GCC_USB2_SLEEP_CLK>,
 				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
+			clock-names = "core", "sleep", "mock_utmi";
 			ranges;
 			status = "disabled";
 
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6a7f4dd0f775..2eb6758b6a3a 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -586,10 +586,9 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@2089000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		acc1: clock-controller@2098000 {
@@ -601,10 +600,9 @@
 			#clock-cells = <0>;
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@2099000 {
+			compatible = "qcom,ipq8064-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		nss_common: syscon@3000000 {
@@ -623,7 +621,6 @@
 			ranges;
 
 			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
 
 			status = "disabled";
 
@@ -669,7 +666,6 @@
 			ranges;
 
 			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
 
 			status = "disabled";
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
new file mode 100644
index 000000000000..a15a44fc0181
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+
+			pwms = <&backlight_pwm 0 100000>;
+			pwm-names = "lp8556";
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0x44>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x6c>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+		};
+	};
+
+	backlight_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+		pinctrl-0 = <&backlight_pwm_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default_state: backlight-pwm-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index b492c95e5d30..270973e85625 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -20,11 +20,6 @@
 
 	chosen { };
 
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
 	clocks {
 		xo_board: xo_board {
 			compatible = "fixed-clock";
@@ -39,6 +34,57 @@
 		};
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		CPU1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		CPU2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		CPU3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			enable-method = "qcom,msm8226-smp";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-msm8226", "qcom,scm";
@@ -47,6 +93,11 @@
 		};
 	};
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
@@ -185,6 +236,117 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8226-saw2-v2.1-l2", "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8226", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		acc0: power-manager@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw0: power-manager@f9089000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9089000 0x1000>;
+		};
+
+		acc1: power-manager@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw1: power-manager@f9099000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf9099000 0x1000>;
+		};
+
+		acc2: power-manager@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw2: power-manager@f90a9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90a9000 0x1000>;
+		};
+
+		acc3: power-manager@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		saw3: power-manager@f90b9000 {
+			compatible = "qcom,msm8226-saw2-v2.1-cpu", "qcom,saw2";
+			reg = <0xf90b9000 0x1000>;
+		};
+
 		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
@@ -201,35 +363,35 @@
 			status = "disabled";
 		};
 
-		sdhc_2: mmc@f98a4900 {
+		sdhc_3: mmc@f9864900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
 			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_default_state>;
+			pinctrl-0 = <&sdhc3_default_state>;
 			status = "disabled";
 		};
 
-		sdhc_3: mmc@f9864900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc", "core";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&gcc GCC_SDCC3_APPS_CLK>,
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
 			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc3_default_state>;
+			pinctrl-0 = <&sdhc2_default_state>;
 			status = "disabled";
 		};
 
@@ -272,7 +434,6 @@
 		};
 
 		blsp1_i2c1: i2c@f9923000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9923000 0x1000>;
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -282,10 +443,10 @@
 			pinctrl-0 = <&blsp1_i2c1_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c2: i2c@f9924000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9924000 0x1000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,10 +456,10 @@
 			pinctrl-0 = <&blsp1_i2c2_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c3: i2c@f9925000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9925000 0x1000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -308,10 +469,10 @@
 			pinctrl-0 = <&blsp1_i2c3_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c4: i2c@f9926000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9926000 0x1000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -321,10 +482,10 @@
 			pinctrl-0 = <&blsp1_i2c4_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c5: i2c@f9927000 {
-			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9927000 0x1000>;
 			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
@@ -334,6 +495,7 @@
 			pinctrl-0 = <&blsp1_i2c5_pins>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		blsp1_i2c6: i2c@f9928000 {
@@ -351,33 +513,6 @@
 			status = "disabled";
 		};
 
-		cci: cci@fda0c000 {
-			compatible = "qcom,msm8226-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xfda0c000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CCI_CLK>;
-			clock-names = "camss_top_ahb",
-				      "cci_ahb",
-				      "cci";
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&cci_default>;
-			pinctrl-1 = <&cci_sleep>;
-
-			status = "disabled";
-
-			cci_i2c0: i2c-bus@0 {
-				reg = <0>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
 		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
@@ -417,6 +552,18 @@
 			};
 		};
 
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		sram@fc190000 {
+			compatible = "qcom,msm8226-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8226";
 			reg = <0xfc400000 0x4000>;
@@ -430,146 +577,28 @@
 				      "sleep_clk";
 		};
 
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8226";
-			reg = <0xfd8c0000 0x6000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
-				 <&gcc GPLL0_VOTE>,
-				 <&gcc GPLL1_VOTE>,
-				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>;
-			clock-names = "xo",
-				      "mmss_gpll0_vote",
-				      "gpll0_vote",
-				      "gpll1_vote",
-				      "gfx3d_clk_src",
-				      "dsi0pll",
-				      "dsi0pllbyte";
-		};
-
-		tlmm: pinctrl@fd510000 {
-			compatible = "qcom,msm8226-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 117>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-			blsp1_i2c1_pins: blsp1-i2c1-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c2_pins: blsp1-i2c2-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_pins: blsp1-i2c3-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c4_pins: blsp1-i2c4-state {
-				pins = "gpio14", "gpio15";
-				function = "blsp_i2c4";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c5_pins: blsp1-i2c5-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_i2c5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c6_pins: blsp1-i2c6-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			cci_default: cci-default-state {
-				pins = "gpio29", "gpio30";
-				function = "cci_i2c0";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
 
-			cci_sleep: cci-sleep-state {
-				pins = "gpio29", "gpio30";
-				function = "gpio";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc428000 0x4000>;
 
-				drive-strength = <2>;
-				bias-disable;
+			apss_master_stats: sram@150 {
+				reg = <0x150 0x14>;
 			};
 
-			sdhc1_default_state: sdhc1-default-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
+			mpss_master_stats: sram@b50 {
+				reg = <0xb50 0x14>;
 			};
 
-			sdhc2_default_state: sdhc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data-pins {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
+			lpss_master_stats: sram@1550 {
+				reg = <0x1550 0x14>;
 			};
 
-			sdhc3_default_state: sdhc3-default-state {
-				clk-pins {
-					pins = "gpio44";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-disable;
-				};
-
-				cmd-pins {
-					pins = "gpio43";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-
-				data-pins {
-					pins = "gpio39", "gpio40", "gpio41", "gpio42";
-					function = "sdc3";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
+			pronto_master_stats: sram@1f50 {
+				reg = <0x1f50 0x14>;
 			};
 		};
 
@@ -714,170 +743,153 @@
 			#interrupt-cells = <4>;
 		};
 
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
 		};
 
-		timer@f9020000 {
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
+			blsp1_i2c1_pins: blsp1-i2c1-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
+			blsp1_i2c2_pins: blsp1-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
+			blsp1_i2c3_pins: blsp1-i2c3-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
+			blsp1_i2c4_pins: blsp1-i2c4-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
+			blsp1_i2c5_pins: blsp1-i2c5-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
+			blsp1_i2c6_pins: blsp1-i2c6-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
 			};
-		};
-
-		sram@fc190000 {
-			compatible = "qcom,msm8226-rpm-stats";
-			reg = <0xfc190000 0x10000>;
-		};
-
-		rpm_msg_ram: sram@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0xfc428000 0x4000>;
-
-			apss_master_stats: sram@150 {
-				reg = <0x150 0x14>;
-			};
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
 
-			mpss_master_stats: sram@b50 {
-				reg = <0xb50 0x14>;
+				drive-strength = <2>;
+				bias-disable;
 			};
 
-			lpss_master_stats: sram@1550 {
-				reg = <0x1550 0x14>;
-			};
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
 
-			pronto_master_stats: sram@1f50 {
-				reg = <0x1f50 0x14>;
+				drive-strength = <2>;
+				bias-disable;
 			};
-		};
-
-		tcsr_mutex: hwlock@fd484000 {
-			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
-			reg = <0xfd484000 0x1000>;
-			#hwlock-cells = <1>;
-		};
 
-		adsp: remoteproc@fe200000 {
-			compatible = "qcom,msm8226-adsp-pil";
-			reg = <0xfe200000 0x100>;
-
-			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			power-domains = <&rpmpd MSM8226_VDDCX>;
-			power-domain-names = "cx";
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_region>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
+			sdhc1_default_state: sdhc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
 
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				cmd-data-pins {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
 
-				qcom,ipc = <&apcs 8 8>;
-				qcom,smd-edge = <1>;
+			sdhc2_default_state: sdhc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
 
-				label = "lpass";
+				cmd-data-pins {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
 			};
-		};
 
-		sram@fdd00000 {
-			compatible = "qcom,msm8226-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x20000>;
-			reg-names = "ctrl", "mem";
-			ranges = <0 0xfec00000 0x20000>;
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
-			clock-names = "core";
+			sdhc3_default_state: sdhc3-default-state {
+				clk-pins {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+				cmd-pins {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
 
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x20000>;
+				data-pins {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
 			};
 		};
 
-		sram@fe805000 {
-			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
-			reg = <0xfe805000 0x1000>;
-
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 
-				mode-bootloader = <0x77665500>;
-				mode-normal = <0x77665501>;
-				mode-recovery = <0x77665502>;
-			};
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte";
 		};
 
 		mdss: display-subsystem@fd900000 {
@@ -1007,6 +1019,33 @@
 			};
 		};
 
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			reg = <0xfda0c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		gpu: adreno@fdb00000 {
 			compatible = "qcom,adreno-305.18", "qcom,adreno";
 			reg = <0xfdb00000 0x10000>;
@@ -1046,6 +1085,71 @@
 				};
 			};
 		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8226-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x20000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
+			clock-names = "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x20000>;
+			};
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
+		};
+
+		sram@fe805000 {
+			compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
+			reg = <0xfe805000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-bootloader = <0x77665500>;
+				mode-normal = <0x77665501>;
+				mode-recovery = <0x77665502>;
+			};
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index a7c245b9c8f9..455ba4bf1bf4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -47,7 +47,7 @@
 
 	cpu-pmu {
 		compatible = "qcom,scorpion-mp-pmu";
-		interrupts = <1 9 0x304>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	clocks {
@@ -89,12 +89,11 @@
 
 		timer@2000000 {
 			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
+			clock-frequency = <27000000>;
 			cpu-offset = <0x40000>;
 		};
 
@@ -105,7 +104,7 @@
 			gpio-controller;
 			gpio-ranges = <&tlmm 0 0 173>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
@@ -283,7 +282,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x19c40000 0x1000>,
 				      <0x19c00000 0x1000>;
-				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -292,7 +291,7 @@
 			gsbi12_i2c: i2c@19c80000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x19c80000 0x1000>;
-				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
index ed328b24335f..3037344eb240 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts
@@ -107,7 +107,20 @@
 		};
 
 		unknown@fb00000 {
-			reg = <0x0fb00000 0x1b00000>;
+			reg = <0x0fb00000 0x280000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		unknown@ff00000 {
+			reg = <0x0ff00000 0x1700000>;
 			no-map;
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
new file mode 100644
index 000000000000..d0e1bc39f8ef
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ * Copyright (c) 2023, Stefan Hansson <newbyte@postmarketos.org>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226-samsung-matisse-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1 LTE";
+	compatible = "samsung,matisselte", "qcom,msm8926", "qcom,msm8226";
+	chassis-type = "tablet";
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+};
+
+&tlmm {
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
new file mode 100644
index 000000000000..4fa982771288
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&msmgpio {
+	i2c3_default_state: i2c3-default-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gsbi3";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	i2c3_sleep_state: i2c3-sleep-state {
+		i2c3-pins {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-bus-hold;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 1a5116336ff0..af6cc6393d74 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -4,6 +4,9 @@
 
 #include "qcom-msm8960.dtsi"
 #include "pm8921.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
 
 / {
 	model = "Samsung Galaxy Express SGH-I437";
@@ -19,6 +22,36 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-home {
+			label = "Home";
+			gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>;
+			debounce-interval = <5>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
 };
 
 &gsbi5 {
@@ -52,6 +85,27 @@
 	status = "okay";
 };
 
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+
+	// Atmel mXT224S touchscreen
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		vdda-supply = <&pm8921_lvs6>;
+		vdd-supply = <&pm8921_l17>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen>;
+	};
+};
+
 &msmgpio {
 	spi1_default: spi1-default-state {
 		mosi-pins {
@@ -83,6 +137,21 @@
 			bias-disable;
 		};
 	};
+
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio40", "gpio50", "gpio81";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	touchscreen: touchscreen-int-state {
+		pins = "gpio11";
+		function = "gpio";
+		output-enable;
+		bias-disable;
+		drive-strength = <2>;
+	};
 };
 
 &pm8921 {
@@ -245,7 +314,7 @@
 		};
 
 		pm8921_l17: l17 {
-			regulator-min-microvolt = <1800000>;
+			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			bias-pull-down;
 		};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index f420740e068e..922f9e49468a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -220,16 +220,24 @@
 			#clock-cells = <0>;
 		};
 
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+		saw0: power-manager@2089000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw0_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+		saw1: power-manager@2099000 {
+			compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
+
+			saw1_vreg: regulator {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+			};
 		};
 
 		gsbi5: gsbi@16400000 {
@@ -359,5 +367,33 @@
 				};
 			};
 		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16200000 0x100>;
+			ranges;
+			cell-index = <3>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				pinctrl-0 = <&i2c3_default_state>;
+				pinctrl-1 = <&i2c3_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
 	};
 };
+#include "qcom-msm8960-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index b1413983787c..5efc38d712cc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -31,7 +31,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <GIC_PPI 9 0xf04>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 
 		CPU0: cpu@0 {
 			compatible = "qcom,krait";
@@ -110,7 +110,7 @@
 
 	pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	rpm: remoteproc {
@@ -346,10 +346,9 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
-		saw_l2: power-controller@f9012000 {
-			compatible = "qcom,saw2";
+		saw_l2: power-manager@f9012000 {
+			compatible = "qcom,msm8974-saw2-v2.1-l2", "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
-			regulator;
 		};
 
 		watchdog@f9017000 {
@@ -424,7 +423,7 @@
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw0: power-controller@f9089000 {
+		saw0: power-manager@f9089000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -434,7 +433,7 @@
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw1: power-controller@f9099000 {
+		saw1: power-manager@f9099000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -444,7 +443,7 @@
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw2: power-controller@f90a9000 {
+		saw2: power-manager@f90a9000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -454,7 +453,7 @@
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		saw3: power-controller@f90b9000 {
+		saw3: power-manager@f90b9000 {
 			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
 			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
 		};
@@ -538,7 +537,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -566,7 +565,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -666,7 +665,7 @@
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			pinctrl-names = "default", "sleep";
@@ -1234,7 +1233,7 @@
 
 		qfprom: qfprom@fc4bc000 {
 			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
+			reg = <0xfc4bc000 0x2100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -2403,10 +2402,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 27429d0fedfb..edc9aaf828c8 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -580,12 +580,16 @@
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_GDSC>;
 
@@ -727,57 +731,57 @@
 
 			frame@17821000 {
 				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17821000 0x1000>,
 				      <0x17822000 0x1000>;
 			};
 
 			frame@17823000 {
 				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17823000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17824000 {
 				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17824000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17825000 {
 				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17825000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17826000 {
 				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17826000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17827000 {
 				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17827000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17828000 {
 				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17828000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17829000 {
 				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17829000 0x1000>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 40591a4da6a4..a949454212e9 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -492,23 +492,25 @@
 			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-					"sleep";
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
-					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "hs_phy_irq",
-					  "ss_phy_irq",
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
-					  "dp_hs_phy_irq";
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_GDSC>;
 
@@ -667,57 +669,57 @@
 
 			frame@17821000 {
 				frame-number = <0>;
-				interrupts = <GIC_SPI 7 0x4>,
-					     <GIC_SPI 6 0x4>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17821000 0x1000>,
 				      <0x17822000 0x1000>;
 			};
 
 			frame@17823000 {
 				frame-number = <1>;
-				interrupts = <GIC_SPI 8 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17823000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17824000 {
 				frame-number = <2>;
-				interrupts = <GIC_SPI 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17824000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17825000 {
 				frame-number = <3>;
-				interrupts = <GIC_SPI 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17825000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17826000 {
 				frame-number = <4>;
-				interrupts = <GIC_SPI 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17826000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17827000 {
 				frame-number = <5>;
-				interrupts = <GIC_SPI 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17827000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17828000 {
 				frame-number = <6>;
-				interrupts = <GIC_SPI 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17828000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@17829000 {
 				frame-number = <7>;
-				interrupts = <GIC_SPI 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x17829000 0x1000>;
 				status = "disabled";
 			};
@@ -804,10 +806,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			<1 12 0xf08>,
-			<1 10 0xf08>,
-			<1 11 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <19200000>;
 	};
 };
diff --git a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
index ed75c01dbee1..3d02f065f71c 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dts
@@ -209,6 +209,18 @@
 	status = "okay";
 };
 
+&extal1_clk {
+	clock-frequency = <26000000>;
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
 &pfc {
 	scifa0_pins: scifa0 {
 		groups = "scifa0_data";
diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
index c39066967053..ac654ff45d0e 100644
--- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi
@@ -450,17 +450,20 @@
 		extalr_clk: extalr {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <32768>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal1_clk: extal1 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <25000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		extal2_clk: extal2 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <48000000>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
 		};
 		fsiack_clk: fsiack {
 			compatible = "fixed-clock";
@@ -621,6 +624,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		cp_clk: cp {
+			compatible = "fixed-factor-clock";
+			clocks = <&main_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		pll0_div2_clk: pll0_div2 {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A73A4_CLK_PLL0>;
@@ -686,9 +696,8 @@
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
-			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
-				 <&main_div2_clk>,
-				 <&cpg_clocks R8A73A4_CLK_HP>,
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_ZS>,
+				 <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
 				 <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
@@ -702,7 +711,7 @@
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal2_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
+			clocks = <&cp_clk>, <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A73A4_CLK_THERMAL R8A73A4_CLK_IIC8
diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi
index 55884ec701f8..d13ab86c3ab4 100644
--- a/arch/arm/boot/dts/renesas/r8a7740.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi
@@ -459,6 +459,7 @@
 		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -474,6 +475,7 @@
 		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
diff --git a/arch/arm/boot/dts/renesas/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi
index 8d4530ed2fc6..b80e832c9277 100644
--- a/arch/arm/boot/dts/renesas/r8a7778.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi
@@ -199,7 +199,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -214,7 +216,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -230,6 +234,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -250,6 +255,8 @@
 		reg =	<0xffd90000 0x1000>,	/* SRU */
 			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
+		reg-names = "sru", "ssi", "adg";
+
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,
 			<&mstp3_clks R8A7778_CLK_SSI6>,
diff --git a/arch/arm/boot/dts/renesas/r8a7779.dtsi b/arch/arm/boot/dts/renesas/r8a7779.dtsi
index 7743af5e2a6f..1944703cba4f 100644
--- a/arch/arm/boot/dts/renesas/r8a7779.dtsi
+++ b/arch/arm/boot/dts/renesas/r8a7779.dtsi
@@ -402,7 +402,9 @@
 		reg = <0xffd80000 0x30>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -417,7 +419,9 @@
 		reg = <0xffd81000 0x30>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2", "ticpi2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
@@ -433,6 +437,7 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tuni0", "tuni1", "tuni2";
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 03a97881519a..21c1678f4e91 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -47,6 +47,17 @@
 		regulator-boot-on;
 	};
 
+	hdmi-connnector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
 	/*
 	 * This is a vbus-supply, which also supplies the GL852G usb hub,
 	 * thus has to be always-on
@@ -239,6 +250,10 @@
 	cpu-supply = <&vdd_arm>;
 };
 
+&display_subsystem {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	vmmc-supply = <&vcc_io>;
@@ -328,6 +343,16 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_connector_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &mdio {
 	phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -423,3 +448,7 @@
 &usb2phy_otg {
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index e2264c40b924..fb98873fd94e 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -115,6 +115,12 @@
 		};
 	};
 
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+		status = "disabled";
+	};
+
 	gpu_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 
@@ -246,6 +252,32 @@
 		};
 	};
 
+	vop: vop@1010e000 {
+		compatible = "rockchip,rk3126-vop";
+		reg = <0x1010e000 0x300>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC0>, <&cru DCLK_VOP>,
+			 <&cru HCLK_LCDC0>;
+		clock-names = "aclk_vop", "dclk_vop",
+			      "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>,
+			 <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb",
+			      "dclk";
+		power-domains = <&power RK3128_PD_VIO>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
 	qos_gpu: qos@1012d000 {
 		compatible = "rockchip,rk3128-qos", "syscon";
 		reg = <0x1012d000 0x20>;
@@ -436,6 +468,34 @@
 		};
 	};
 
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3128-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>, <&cru DCLK_VOP>;
+		clock-names = "pclk", "ref";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+		power-domains = <&power RK3128_PD_VIO>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	timer0: timer@20044000 {
 		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
 		reg = <0x20044000 0x20>;
diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index 831561fc1814..96421355c274 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -736,14 +736,20 @@
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				hdmi_in_vop: endpoint@0 {
-					reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+
+				hdmi_in_vop: endpoint {
 					remote-endpoint = <&vop_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index ead343dc3df1..3f1d640afafa 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -1240,27 +1240,37 @@
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0x0 0xff980000 0x0 0x20000>;
 		reg-io-width = <4>;
-		#sound-dai-cells = <0>;
-		rockchip,grf = <&grf>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
 		clock-names = "iahb", "isfr", "cec";
 		power-domains = <&power RK3288_PD_VIO>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
-			hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				hdmi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_hdmi>;
 				};
+
 				hdmi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_hdmi>;
 				};
 			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
index 32b329e87a0c..9a87dc0d5f66 100644
--- a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi
@@ -8,6 +8,8 @@
 	aliases {
 		ethernet0 = &gmac;
 		mmc0 = &emmc;
+		mmc1 = &sdio;
+		mmc2 = &sdmmc;
 	};
 
 	chosen {
@@ -325,7 +327,7 @@
 	pmuio1-supply = <&vcc3v3_sys>;
 	vccio1-supply = <&vcc_1v8>;
 	vccio2-supply = <&vccio_sd>;
-	vccio3-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc3v3_sd>;
 	vccio4-supply = <&vcc_dovdd>;
 	vccio5-supply = <&vcc_1v8>;
 	vccio6-supply = <&vcc_1v8>;
@@ -343,14 +345,14 @@
 	cap-sd-highspeed;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	max-frequency = <100000000>;
+	max-frequency = <50000000>;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 	rockchip,default-sample-phase = <90>;
-	sd-uhs-sdr104;
-	vmmc-supply = <&vcc3v3_sys>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vcc_1v8>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/samsung/exynos4412-i9300.dts b/arch/arm/boot/dts/samsung/exynos4412-i9300.dts
index 61aca5798f38..b79d456e976d 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-i9300.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-i9300.dts
@@ -18,7 +18,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x3fc00000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/samsung/exynos4412-i9305.dts b/arch/arm/boot/dts/samsung/exynos4412-i9305.dts
index 77083f1a8273..1048ef5d9bc3 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-i9305.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-i9305.dts
@@ -11,7 +11,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/samsung/exynos4412-n710x.dts b/arch/arm/boot/dts/samsung/exynos4412-n710x.dts
index 0a151437fc73..eee1000dea92 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/samsung/exynos4412-n710x.dts
@@ -9,7 +9,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 
 	/* bootargs are passed in by bootloader */
diff --git a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
index 0b89d5682f85..28a605802733 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-p4note.dtsi
@@ -23,7 +23,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
+		reg = <0x40000000 0x7fc00000>;
 	};
 
 	aliases {
@@ -362,6 +362,39 @@
 	status = "okay";
 };
 
+&i2c_1 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lsm330dlc-accel";
+		reg = <0x19>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&accelerometer_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+
+	gyro@6b {
+		compatible = "st,lsm330dlc-gyro";
+		reg = <0x6b>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-0 = <&gyro_data_enable &gyro_irq>;
+		pinctrl-names = "default";
+		mount-matrix =	"1",  "0",  "0",
+				"0", "-1",  "0",
+				"0",  "0", "-1";
+	};
+};
+
 &i2c_3 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-slave-addr = <0x10>;
@@ -844,6 +877,12 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_data_enable: gyro-data-enable-pins {
+		samsung,pins = "gpl2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
 	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -894,12 +933,24 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
+	accelerometer_irq: accelerometer-irq-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
+	gyro_irq: gyro-irq-pins {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi
index f525b2f5e4e0..246040967082 100644
--- a/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5420-galaxy-tab-common.dtsi
@@ -30,6 +30,7 @@
 
 	aliases {
 		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
 		mmc2 = &mmc_2;
 	};
 
@@ -39,7 +40,7 @@
 
 	memory@20000000 {
 		device_type = "memory";
-		reg = <0x20000000 0xc0000000>;
+		reg = <0x20000000 0xbfa00000>;
 	};
 
 	firmware@2073000 {
@@ -87,6 +88,13 @@
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
+
+	mmc1_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
+		clocks = <&s2mps11_osc S2MPS11_CLK_BT>;
+		clock-names = "ext_clock";
+	};
 };
 
 &cci {
@@ -620,6 +628,25 @@
 	vqmmc-supply = <&ldo3_reg>;
 };
 
+/* WiFi */
+&mmc_1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	card-detect-delay = <200>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&mmc1_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
+		    <&sd1_bus4>, <&wifi_en>;
+	pinctrl-names = "default";
+	vqmmc-supply = <&ldo2_reg>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	status = "okay";
+};
+
 /* External sdcard */
 &mmc_2 {
 	status = "okay";
@@ -649,6 +676,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+
+	wifi_en: wifi-en-pins {
+		samsung,pins = "gpy7-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
index 4e757b6e28e1..3759742d38ca 100644
--- a/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/samsung/exynos5420-peach-pit.dts
@@ -967,6 +967,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
index b4a851aa8881..4a4c55a4beb3 100644
--- a/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5422-odroidxu3-common.dtsi
@@ -55,7 +55,7 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			thermal-sensors = <&tmu_cpu0>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
@@ -78,12 +78,6 @@
 					hysteresis = <0>; /* millicelsius */
 					type = "critical";
 				};
-				/*
-				 * Exynos542x supports only 4 trip-points
-				 * so for these polling mode is required.
-				 * Start polling at temperature level of last
-				 * interrupt-driven trip: cpu0_alert2
-				 */
 				cpu0_alert3: cpu-alert-3 {
 					temperature = <70000>; /* millicelsius */
 					hysteresis = <10000>; /* millicelsius */
@@ -144,7 +138,7 @@
 		};
 		cpu1_thermal: cpu1-thermal {
 			thermal-sensors = <&tmu_cpu1>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
@@ -217,7 +211,7 @@
 		};
 		cpu2_thermal: cpu2-thermal {
 			thermal-sensors = <&tmu_cpu2>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
@@ -290,7 +284,7 @@
 		};
 		cpu3_thermal: cpu3-thermal {
 			thermal-sensors = <&tmu_cpu3>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
@@ -363,7 +357,7 @@
 		};
 		gpu_thermal: gpu-thermal {
 			thermal-sensors = <&tmu_gpu>;
-			polling-delay-passive = <250>;
+			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
diff --git a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
index f91bc4ae008e..9bbbdce9103a 100644
--- a/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/samsung/exynos5800-peach-pi.dts
@@ -949,6 +949,7 @@
 		reg = <0>;
 		spi-max-frequency = <3125000>;
 		google,has-vbc-nvram;
+		wakeup-source;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index 7892ad69b441..9fedd6776208 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32f469-disco.dtb \
 	stm32f746-disco.dtb \
 	stm32f769-disco.dtb \
+	stm32f769-disco-mb1166-reva09.dtb \
 	stm32429i-eval.dtb \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
diff --git a/arch/arm/boot/dts/st/stih407-pinctrl.dtsi b/arch/arm/boot/dts/st/stih407-pinctrl.dtsi
index 7815669fe813..dcb821f567fa 100644
--- a/arch/arm/boot/dts/st/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stih407-pinctrl.dtsi
@@ -462,14 +462,14 @@
 			serial0 {
 				pinctrl_serial0: serial0-0 {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 					};
 				};
 				pinctrl_serial0_hw_flowctrl: serial0-0_hw_flowctrl {
 					st,pins {
-						tx =  <&pio17 0 ALT1 OUT>;
-						rx =  <&pio17 1 ALT1 IN>;
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
 						cts = <&pio17 2 ALT1 IN>;
 						rts = <&pio17 3 ALT1 OUT>;
 					};
diff --git a/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
new file mode 100644
index 000000000000..ff7ff32371d0
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f769-disco.dts"
+
+&panel0 {
+	compatible = "frida,frd400b25025", "novatek,nt35510";
+	vddi-supply = <&vcc_3v3>;
+	vdd-supply = <&vcc_3v3>;
+	/delete-property/power-supply;
+};
diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index 5d12ae25b327..52c5baf58ab9 100644
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-#include "stm32f746.dtsi"
+#include "stm32f769.dtsi"
 #include "stm32f769-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -60,6 +60,19 @@
 		reg = <0xC0000000 0x1000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,dma {
+			compatible = "shared-dma-pool";
+			linux,dma-default;
+			no-map;
+			size = <0x100000>;
+		};
+	};
+
 	aliases {
 		serial0 = &usart1;
 	};
@@ -92,9 +105,9 @@
 		clock-names = "main_clk";
 	};
 
-	mmc_vcard: mmc_vcard {
+	vcc_3v3: vcc-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc_vcard";
+		regulator-name = "vcc_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
@@ -114,6 +127,45 @@
 	clock-frequency = <25000000>;
 };
 
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel0: panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>; /* dsi virtual channel (0..3) */
+		reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+		power-supply = <&vcc_3v3>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins_b>;
 	pinctrl-names = "default";
@@ -122,13 +174,23 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint {
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };
 
 &sdio2 {
 	status = "okay";
-	vmmc-supply = <&mmc_vcard>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
 	broken-cd;
 	pinctrl-names = "default", "opendrain", "sleep";
diff --git a/arch/arm/boot/dts/st/stm32f769.dtsi b/arch/arm/boot/dts/st/stm32f769.dtsi
new file mode 100644
index 000000000000..4e7d9032149c
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32f769.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Dario Binacchi <dario.binacchi@amarulasolutions.com>
+ */
+
+#include "stm32f746.dtsi"
+
+/ {
+	soc {
+		dsi: dsi@40016c00 {
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			clocks = <&rcc 1 CLK_F769_DSI>, <&clk_hse>;
+			clock-names = "pclk", "ref";
+			resets = <&rcc STM32F7_APB2_RESET(DSI)>;
+			reset-names = "apb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index b04d24c939c3..3900f32da797 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1315,6 +1315,13 @@
 			status = "disabled";
 		};
 
+		crc1: crc@58009000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x58009000 0x400>;
+			clocks = <&rcc CRC1>;
+			status = "disabled";
+		};
+
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index eea740d097c7..52171214a308 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -93,6 +93,14 @@
 	};
 };
 
+&crc1 {
+	status = "okay";
+};
+
+&cryp {
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
diff --git a/arch/arm/boot/dts/st/stm32mp157.dtsi b/arch/arm/boot/dts/st/stm32mp157.dtsi
index 6197d878894d..97cd24227cef 100644
--- a/arch/arm/boot/dts/st/stm32mp157.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157.dtsi
@@ -20,7 +20,7 @@
 		dsi: dsi@5a000000 {
 			compatible = "st,stm32-dsi";
 			reg = <0x5a000000 0x800>;
-			clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+			clocks = <&rcc DSI>, <&clk_hse>, <&rcc DSI_PX>;
 			clock-names = "pclk", "ref", "px_clk";
 			phy-dsi-supply = <&reg18>;
 			resets = <&rcc DSI_R>;
diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
index ce5937270aa1..306e1bc2a514 100644
--- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts
@@ -30,7 +30,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
index c20a73841c1f..956da5f26c1c 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts
@@ -36,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
index 5e2eaf57ce22..8e4b0db198c2 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts
@@ -35,7 +35,7 @@
 };
 
 &dsi {
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
index 3226fb945a8e..72b9cab2d990 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts
@@ -36,7 +36,7 @@
 
 &dsi {
 	phy-dsi-supply = <&scmi_reg18>;
-	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
 };
 
 &gpioz {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
index 8a34d15e9005..4cc177031661 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts
@@ -148,7 +148,7 @@
 		compatible = "ti,lmp92064";
 		reg = <0>;
 
-		reset-gpios = <&gpioa 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		shunt-resistor-micro-ohms = <15000>;
 		spi-max-frequency = <5000000>;
 		vdd-supply = <&reg_pb_3v3>;
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index fc3a2386dbb9..cfaf8adde319 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -409,7 +409,7 @@ baseboard_eeprom: &sip_eeprom {
 &spi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi2_pins_c>;
-	cs-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&gpiof 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
@@ -471,6 +471,10 @@ baseboard_eeprom: &sip_eeprom {
 		interrupt-parent = <&gpioa>;
 		interrupts = <6 IRQ_TYPE_EDGE_RISING>;
 
+		/* Reduce RGMII EMI emissions by reducing drive strength */
+		microchip,hi-drive-strength-microamp = <2000>;
+		microchip,lo-drive-strength-microamp = <8000>;
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/davinci/da850.dtsi b/arch/arm/boot/dts/ti/davinci/da850.dtsi
index f759fdfe1b10..1d3fb5397ce3 100644
--- a/arch/arm/boot/dts/ti/davinci/da850.dtsi
+++ b/arch/arm/boot/dts/ti/davinci/da850.dtsi
@@ -536,7 +536,7 @@
 			reg = <0x40000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <16>;
+			interrupts = <16>, <17>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc0 5>;
@@ -566,7 +566,7 @@
 			reg = <0x21b000 0x1000>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			interrupts = <72>;
+			interrupts = <72>, <73>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
 			clocks = <&psc1 18>;
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi
index 0397c3423d2d..20bab90ee0ba 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 clock tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi
index cf30e007fea3..74720dbf3110 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts
index 6978d6a362f3..58099ce8d449 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
index 5c88a90903b8..e586350ae4dc 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Edison Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi
index 65c32946c522..662aa33cba11 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Edison soc device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
index f0ddbbcdc972..bf5f67d70235 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G EVM
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts
index 6ceb0d5c6388..264e1e0d23c8 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-ice.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Industrial Communication Engine EVM
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
index 7109ca031617..974c8f2fa740 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G Netcp driver
  *
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@4020000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
index 102d59694d90..790b29ab0fa2 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for K2G SOC
  *
- * Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi
index 4ba6912176ef..3ca4722087c9 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
index 8dfb54295027..b824fad9a4ec 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking EVM device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
index c2ee775eab6a..3ab1b5d6f9bc 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Hawking Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi
index da6d3934c2e8..4fdf4b30384f 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Kepler/Hawking soc specific device tree
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi
index 635528064dea..fcfc2fb6cc2d 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-clocks.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 lamarr SoC clock nodes
  *
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 clocks {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts
index be619e39a16f..ccda63ab12fe 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr EVM device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
index 1afebd7458c1..b8f880faaa31 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for Keystone 2 Lamarr Netcp driver
  *
- * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 qmss: qmss@2a40000 {
diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
index 2062fe561642..330b437b667f 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l.dtsi
@@ -2,7 +2,7 @@
 /*
  * Keystone 2 Lamarr SoC specific device tree
  *
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/reset/ti-syscon.h>
diff --git a/arch/arm/boot/dts/ti/keystone/keystone.dtsi b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
index 1fd04bb37a15..ff16428860a9 100644
--- a/arch/arm/boot/dts/ti/keystone/keystone.dtsi
+++ b/arch/arm/boot/dts/ti/keystone/keystone.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2013-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts
index ea5882ed7010..f82d2231dfaa 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir2110.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts
index ea4f8dde6424..74a2191af146 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir3220.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts
index ec914f27d11d..723ff88f76ac 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-ir5221.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
index 6a52e42b9e81..049fd8e1b40f 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /*#include "am33xx.dtsi"*/
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index c14d5b70c72f..a4beb718559c 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 #include "am33xx.dtsi"
diff --git a/arch/arm/boot/dts/ti/omap/am335x-base0033.dts b/arch/arm/boot/dts/ti/omap/am335x-base0033.dts
index eba843e22ea1..46078af4b7a3 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-base0033.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-base0033.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 #include "am335x-igep0033.dtsi"
diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
index 96451c8a815c..2d0216840ff5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi
@@ -289,8 +289,8 @@
 	 * For details, see linux-omap mailing list May 2015 thread
 	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
 	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	https://www.spinics.net/lists/linux-omap/msg118615.html
 	 *
 	 * You can override this later with
 	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 72990e7ffe10..06767ea164b5 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
index 57f78846c42d..eba888dcd60e 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
+ * https://www.ti.com/tool/tmdssk3358
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
index 205fe0ed7352..56e5d954a490 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts
@@ -303,8 +303,8 @@
    * For details, see linux-omap mailing list May 2015 thread
    *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
    * In particular, messages:
-   *  http://www.spinics.net/lists/linux-omap/msg118585.html
-   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *  https://www.spinics.net/lists/linux-omap/msg118585.html
+   *  https://www.spinics.net/lists/linux-omap/msg118615.html
    *
    * You can override this later with
    *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
index 3c4228927f56..6f0f4fba043b 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts
@@ -5,7 +5,7 @@
 
 /*
  * AM335x ICE V2 board
- * http://www.ti.com/tool/tmdsice3359
+ * https://www.ti.com/tool/tmdsice3359
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi b/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi
index e85c33fd42f0..c7a4a5476489 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-igep0033.dtsi
@@ -2,7 +2,7 @@
 /*
  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
  *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi
index 584599269217..9c9359844a20 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myc.dtsi
@@ -2,7 +2,7 @@
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 
 /* Based on code by myc_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
index d3bba79b9358..fd91a3c01a63 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
 /* Based on code by myd_c335x.dts, MYiRtech.com */
-/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+/* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-nano.dts b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
index a475c0d91306..26b5510cb3d1 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-nano.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-nano.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ * Copyright (C) 2013 Newflow Ltd - https://www.newflow.co.uk/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts
index f7fad48e36ed..546e88f8fbad 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcan-plus-1xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
index 76751a324ad7..f66d57bb685e 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts
index 5a9fcec040fa..5fb2c629f35c 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-8xx.dts
@@ -5,7 +5,7 @@
 
 /*
  * VScom OnRISC
- * http://www.vscom.de
+ * https://www.vscom.de
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
index 3c9444e98c14..f38f5bff2b96 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts
@@ -3,7 +3,7 @@
  *
  * EETS GmbH PDU001 board device tree file
  *
- * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ * Copyright (C) 2018 EETS GmbH - https://www.eets.ch/
  *
  * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
  *
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
index 5522759def26..7c9f65126c63 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2021 Sancloud Ltd
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts
index b1b400226d83..c6c96f6182a8 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-lite.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2021 SanCloud Ltd
  */
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts
index 596774c84744..2841e95d9a09 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts
@@ -2,7 +2,7 @@
 /*
  * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
  *
- * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - https://www.compulab.co.il/
  */
 
 #include "am335x-cm-t335.dts"
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
index 1115c812f6c8..757ebd96b3f0 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ * Copyright (C) 2015 Toby Churchill - https://www.toby-churchill.com/
+ * url above is defunct
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 5b9e01a8aa5d..989d5a6edeed 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -640,10 +640,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <37>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ti/omap/am3517.dtsi b/arch/arm/boot/dts/ti/omap/am3517.dtsi
index 77e58e686fb1..19aad715dff7 100644
--- a/arch/arm/boot/dts/ti/omap/am3517.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am3517.dtsi
@@ -162,12 +162,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi
index 9d2c064534f7..5fd1b380ece6 100644
--- a/arch/arm/boot/dts/ti/omap/am4372.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi
@@ -719,6 +719,12 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x1000000>;
+
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts
index 9ec75d03eaff..172516a7667e 100644
--- a/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-cm-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts
index 34a5407bee15..5ec57dcb0659 100644
--- a/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts
+++ b/arch/arm/boot/dts/ti/omap/am437x-sbc-t43.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 #include "am437x-cm-t43.dts"
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 3e834fc7e370..eb1ec85aba28 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
index 4fd831ff206f..d6e3152b02f7 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab CL-SOM-AM57x System-on-Module
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts
index 363115afb0a4..64675f4edb60 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts
+++ b/arch/arm/boot/dts/ti/omap/am57xx-sbc-am57x.dts
@@ -2,7 +2,7 @@
 /*
  * Support for CompuLab SBC-AM57x single board computer
  *
- * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab Ltd. - https://www.compulab.co.il/
  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
  */
 
diff --git a/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi b/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi
index f5e6216718d8..8a8fa1b2b26c 100644
--- a/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi
+++ b/arch/arm/boot/dts/ti/omap/compulab-sb-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ * Copyright (C) 2015 CompuLab, Ltd. - https://www.compulab.co.il/
  */
 
 / {
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index 5733e3a4ea8e..6e67d99832ac 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -80,7 +80,7 @@
 						};
 					};
 
-					phy_gmii_sel: phy-gmii-sel {
+					phy_gmii_sel: phy-gmii-sel@554 {
 						compatible = "ti,dra7xx-phy-gmii-sel";
 						reg = <0x554 0x4>;
 						#phy-cells = <1>;
diff --git a/arch/arm/boot/dts/ti/omap/dra7.dtsi b/arch/arm/boot/dts/ti/omap/dra7.dtsi
index 6509c742fb58..164fa88c459e 100644
--- a/arch/arm/boot/dts/ti/omap/dra7.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7.dtsi
@@ -638,7 +638,7 @@
 			};
 		};
 
-		abb_mpu: regulator-abb-mpu {
+		abb_mpu: regulator-abb-mpu@4ae07ddc {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
 			#address-cells = <0>;
@@ -671,7 +671,7 @@
 			>;
 		};
 
-		abb_ivahd: regulator-abb-ivahd {
+		abb_ivahd: regulator-abb-ivahd@4ae07e34 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_ivahd";
 			#address-cells = <0>;
@@ -704,7 +704,7 @@
 			>;
 		};
 
-		abb_dspeve: regulator-abb-dspeve {
+		abb_dspeve: regulator-abb-dspeve@4ae07e30 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_dspeve";
 			#address-cells = <0>;
@@ -737,7 +737,7 @@
 			>;
 		};
 
-		abb_gpu: regulator-abb-gpu {
+		abb_gpu: regulator-abb-gpu@4ae07de4 {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_gpu";
 			#address-cells = <0>;
@@ -850,12 +850,19 @@
 					<SYSC_IDLE_SMART>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
 			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
+
+			gpu@0 {
+				compatible = "ti,am5728-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		crossbar_mpu: crossbar@4a002a48 {
diff --git a/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi b/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi
index 006189dad7a7..bb5239ae164d 100644
--- a/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra74x-p.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi
index 04a7a6d1d529..06466d36caa9 100644
--- a/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7xx-clocks.dtsi
@@ -1685,7 +1685,7 @@
 		reg = <0x0558>;
 	};
 
-	sys_32k_ck: clock-sys-32k {
+	sys_32k_ck: clock-sys-32k@6c4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clock-output-names = "sys_32k_ck";
diff --git a/arch/arm/boot/dts/ti/omap/omap34xx.dtsi b/arch/arm/boot/dts/ti/omap/omap34xx.dtsi
index fc7233ac183a..acdd0ee34421 100644
--- a/arch/arm/boot/dts/ti/omap/omap34xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap34xx.dtsi
@@ -164,12 +164,13 @@
 			clock-names = "fck", "ick";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
+			ranges = <0 0x50000000 0x10000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3430-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x10000>; /* 64kB */
+				interrupts = <21>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/omap36xx.dtsi b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
index e6d8070c1bf8..c3d79ecd56e3 100644
--- a/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap36xx.dtsi
@@ -211,10 +211,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x50000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap3630-gpu", "img,powervr-sgx530";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <21>;
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
index 24f7d0285f79..339e52ba3614 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts
@@ -85,6 +85,7 @@
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		system-power-controller;
 
 		rtc {
 			compatible = "ti,twl4030-rtc";
diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
index f528511c2537..97706d6296a6 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-panda-common.dtsi
@@ -408,6 +408,7 @@
 		reg = <0x48>;
 		/* IRQ# = 7 */
 		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		system-power-controller;
 	};
 
 	twl6040: twl@4b {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
index b2cb93edbc3a..b535d24c6140 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
@@ -439,7 +439,7 @@
 
 	/*
 	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 * https://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf (defunct)
 	 */
 	bh1780@29 {
 		compatible = "rohm,bh1780";
diff --git a/arch/arm/boot/dts/ti/omap/omap4.dtsi b/arch/arm/boot/dts/ti/omap/omap4.dtsi
index 2bbff9032be3..559b2bfe4ca7 100644
--- a/arch/arm/boot/dts/ti/omap/omap4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4.dtsi
@@ -501,10 +501,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap4430-gpu", "img,powervr-sgx540";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		/*
diff --git a/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts b/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts
index d4ca2e3a14dd..0368e32f67e7 100644
--- a/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/ti/omap/omap5-igep0050.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ * Copyright (C) 2013 ISEE 2007 SL - https://www.isee.biz/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/ti/omap/omap5.dtsi b/arch/arm/boot/dts/ti/omap/omap5.dtsi
index bac6fa838793..6a66214ad0e2 100644
--- a/arch/arm/boot/dts/ti/omap/omap5.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap5.dtsi
@@ -453,10 +453,11 @@
 			#size-cells = <1>;
 			ranges = <0 0x56000000 0x2000000>;
 
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
+			gpu@0 {
+				compatible = "ti,omap5432-gpu", "img,powervr-sgx544";
+				reg = <0x0 0x2000000>; /* 32MB */
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		target-module@58000000 {
diff --git a/arch/arm/boot/dts/ti/omap/twl4030.dtsi b/arch/arm/boot/dts/ti/omap/twl4030.dtsi
index 93e07c18781b..a5d9c5738317 100644
--- a/arch/arm/boot/dts/ti/omap/twl4030.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl4030.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/ti/omap/twl6030.dtsi b/arch/arm/boot/dts/ti/omap/twl6030.dtsi
index 9d588cfaa5cb..8da969035c41 100644
--- a/arch/arm/boot/dts/ti/omap/twl6030.dtsi
+++ b/arch/arm/boot/dts/ti/omap/twl6030.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
  */
 &twl {
 	compatible = "ti,twl6030";
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 12a812e61c16..f4765be1b2a0 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -4,46 +4,21 @@ menuconfig ARCH_QCOM
 	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_AMBA
+	select CLKSRC_QCOM
+	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select QCOM_SCM if SMP
 	help
 	  Support for Qualcomm's devicetree based systems.
+	  This includes support for a few devices with ARM64 SoC, that have
+	  ARM32 signed firmware that does not allow booting ARM64 kernels.
 
 if ARCH_QCOM
 
-config ARCH_IPQ40XX
-	bool "Enable support for IPQ40XX"
-	select CLKSRC_QCOM
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MSM8X60
-	bool "Enable support for MSM8X60"
-	select CLKSRC_QCOM
-
-config ARCH_MSM8909
-	bool "Enable support for MSM8909"
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MSM8916
-	bool "Enable support for MSM8916"
-	select HAVE_ARM_ARCH_TIMER
+config ARCH_QCOM_RESERVE_SMEM
+	bool "Reserve SMEM at the beginning of RAM"
 	help
-	  Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016).
-
-	  Note that ARM64 is the main supported architecture for MSM8916.
-	  The ARM32 option is intended for a few devices with signed firmware
-	  that does not allow booting ARM64 kernels.
-
-config ARCH_MSM8960
-	bool "Enable support for MSM8960"
-	select CLKSRC_QCOM
-
-config ARCH_MSM8974
-	bool "Enable support for MSM8974"
-	select HAVE_ARM_ARCH_TIMER
-
-config ARCH_MDM9615
-	bool "Enable support for MDM9615"
-	select CLKSRC_QCOM
+	  Reserve 2MB at the beginning of the System RAM for shared mem.
+	  This is required on IPQ40xx, MSM8x60 and MSM8960 platforms.
 
 endif
author	Linus Torvalds <torvalds@linux-foundation.org>	2024-03-12 10:29:57 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2024-03-12 10:29:57 -0700
commit	306bee64b73c92f43df46db7e92621f3309fd28b (patch)
tree	e085a10fbbf0edaae207e1390c436ccbf74451d6 /arch/arm
parent	Merge tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/g... (diff)
parent	Merge tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/l... (diff)
download	linux-306bee64b73c92f43df46db7e92621f3309fd28b.tar.gz linux-306bee64b73c92f43df46db7e92621f3309fd28b.tar.bz2 linux-306bee64b73c92f43df46db7e92621f3309fd28b.zip