diff options
author | 2018-04-13 12:32:30 +0800 | |
---|---|---|
committer | 2018-04-26 11:25:04 -0700 | |
commit | fa89f53bd7288d6aa7a982841119e7123faf5a53 (patch) | |
tree | edcd32381580db6a29a58a681df8ee70dd7d8a68 /drivers/ata/sata_highbank.c | |
parent | Revert "ata: ahci-platform: add reset control support" (diff) | |
download | linux-fa89f53bd7288d6aa7a982841119e7123faf5a53.tar.gz linux-fa89f53bd7288d6aa7a982841119e7123faf5a53.tar.bz2 linux-fa89f53bd7288d6aa7a982841119e7123faf5a53.zip |
libahci: Allow drivers to override stop_engine
Marvell armada37xx, armada7k and armada8k share the same
AHCI sata controller IP, and currently there is an issue
(Errata Ref#226)that the SATA can not be detected via SATA
Port-MultiPlayer(PMP). After debugging, the reason is
found that the value of Port-x FIS-based Switching Control
(PxFBS@0x40) became wrong.
According to design, the bits[11:8, 0] of register PxFBS
are cleared when Port Command and Status (0x18) bit[0]
changes its value from 1 to 0, i.e. falling edge of Port
Command and Status bit[0] sends PULSE that resets PxFBS
bits[11:8; 0].
So it needs save the port PxFBS register before PxCMD
ST write and restore the port PxFBS register afterwards
in ahci_stop_engine().
This commit allows drivers to override ahci_stop_engine
behavior for use by the Marvell AHCI driver(and potentially
other drivers in the future).
Signed-off-by: Evan Wang <xswang@marvell.com>
Cc: Ofer Heifetz <oferh@marvell.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/sata_highbank.c')
-rw-r--r-- | drivers/ata/sata_highbank.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index aafb8cc03523..e67815b896fc 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -410,7 +410,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, int rc; int retry = 100; - ahci_stop_engine(ap); + hpriv->stop_engine(ap); /* clear D2H reception area to properly wait for D2H FIS */ ata_tf_init(link->device, &tf); |