Merge branch 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux into next/soc

From Nicolas Pitre:

This is the first MCPM backend submission for VExpress running on RTSM
aka Fast Models implementing the big.LITTLE system architecture.  This
enables SMP secondary boot as well as CPU hotplug on this platform.

A big prerequisite for this support is the CCI driver from Lorenzo
included in this pull request.

Also included is Rob Herring's set_auxcr/get_auxcr allowing nicer code.

Signed-off-by: Olof Johansson <olof@lixom.net>

* 'VExpress_DCSCB' of git://git.linaro.org/people/nico/linux:
  ARM: vexpress: Select multi-cluster SMP operation if required
  ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI
  ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster
  ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation
  ARM: vexpress: introduce DCSCB support
  ARM: introduce common set_auxcr/get_auxcr functions
  drivers/bus: arm-cci: function to enable CCI ports from early boot code
  drivers: bus: add ARM CCI support

3 files changed, 542 insertions, 0 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index b05ecab915c4..5286e2d333b0 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -26,4 +26,11 @@ config OMAP_INTERCONNECT
 
 	help
 	  Driver to enable OMAP interconnect error handling driver.
+
+config ARM_CCI
+	bool "ARM CCI driver support"
+	depends on ARM
+	help
+	  Driver supporting the CCI cache coherent interconnect for ARM
+	  platforms.
 endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 3c7b53c12091..670cea443802 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 
 # Interconnect bus driver for OMAP SoCs.
 obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
+# CCI cache coherent interconnect for ARM platforms
+obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
new file mode 100644
index 000000000000..380319ebf729
--- /dev/null
+++ b/drivers/bus/arm-cci.c
@@ -0,0 +1,533 @@
+/*
+ * CCI cache coherent interconnect driver
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+
+#define CCI_PORT_CTRL		0x0
+#define CCI_CTRL_STATUS		0xc
+
+#define CCI_ENABLE_SNOOP_REQ	0x1
+#define CCI_ENABLE_DVM_REQ	0x2
+#define CCI_ENABLE_REQ		(CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ)
+
+struct cci_nb_ports {
+	unsigned int nb_ace;
+	unsigned int nb_ace_lite;
+};
+
+enum cci_ace_port_type {
+	ACE_INVALID_PORT = 0x0,
+	ACE_PORT,
+	ACE_LITE_PORT,
+};
+
+struct cci_ace_port {
+	void __iomem *base;
+	unsigned long phys;
+	enum cci_ace_port_type type;
+	struct device_node *dn;
+};
+
+static struct cci_ace_port *ports;
+static unsigned int nb_cci_ports;
+
+static void __iomem *cci_ctrl_base;
+static unsigned long cci_ctrl_phys;
+
+struct cpu_port {
+	u64 mpidr;
+	u32 port;
+};
+
+/*
+ * Use the port MSB as valid flag, shift can be made dynamic
+ * by computing number of bits required for port indexes.
+ * Code disabling CCI cpu ports runs with D-cache invalidated
+ * and SCTLR bit clear so data accesses must be kept to a minimum
+ * to improve performance; for now shift is left static to
+ * avoid one more data access while disabling the CCI port.
+ */
+#define PORT_VALID_SHIFT	31
+#define PORT_VALID		(0x1 << PORT_VALID_SHIFT)
+
+static inline void init_cpu_port(struct cpu_port *port, u32 index, u64 mpidr)
+{
+	port->port = PORT_VALID | index;
+	port->mpidr = mpidr;
+}
+
+static inline bool cpu_port_is_valid(struct cpu_port *port)
+{
+	return !!(port->port & PORT_VALID);
+}
+
+static inline bool cpu_port_match(struct cpu_port *port, u64 mpidr)
+{
+	return port->mpidr == (mpidr & MPIDR_HWID_BITMASK);
+}
+
+static struct cpu_port cpu_port[NR_CPUS];
+
+/**
+ * __cci_ace_get_port - Function to retrieve the port index connected to
+ *			a cpu or device.
+ *
+ * @dn: device node of the device to look-up
+ * @type: port type
+ *
+ * Return value:
+ *	- CCI port index if success
+ *	- -ENODEV if failure
+ */
+static int __cci_ace_get_port(struct device_node *dn, int type)
+{
+	int i;
+	bool ace_match;
+	struct device_node *cci_portn;
+
+	cci_portn = of_parse_phandle(dn, "cci-control-port", 0);
+	for (i = 0; i < nb_cci_ports; i++) {
+		ace_match = ports[i].type == type;
+		if (ace_match && cci_portn == ports[i].dn)
+			return i;
+	}
+	return -ENODEV;
+}
+
+int cci_ace_get_port(struct device_node *dn)
+{
+	return __cci_ace_get_port(dn, ACE_LITE_PORT);
+}
+EXPORT_SYMBOL_GPL(cci_ace_get_port);
+
+static void __init cci_ace_init_ports(void)
+{
+	int port, ac, cpu;
+	u64 hwid;
+	const u32 *cell;
+	struct device_node *cpun, *cpus;
+
+	cpus = of_find_node_by_path("/cpus");
+	if (WARN(!cpus, "Missing cpus node, bailing out\n"))
+		return;
+
+	if (WARN_ON(of_property_read_u32(cpus, "#address-cells", &ac)))
+		ac = of_n_addr_cells(cpus);
+
+	/*
+	 * Port index look-up speeds up the function disabling ports by CPU,
+	 * since the logical to port index mapping is done once and does
+	 * not change after system boot.
+	 * The stashed index array is initialized for all possible CPUs
+	 * at probe time.
+	 */
+	for_each_child_of_node(cpus, cpun) {
+		if (of_node_cmp(cpun->type, "cpu"))
+			continue;
+		cell = of_get_property(cpun, "reg", NULL);
+		if (WARN(!cell, "%s: missing reg property\n", cpun->full_name))
+			continue;
+
+		hwid = of_read_number(cell, ac);
+		cpu = get_logical_index(hwid & MPIDR_HWID_BITMASK);
+
+		if (cpu < 0 || !cpu_possible(cpu))
+			continue;
+		port = __cci_ace_get_port(cpun, ACE_PORT);
+		if (port < 0)
+			continue;
+
+		init_cpu_port(&cpu_port[cpu], port, cpu_logical_map(cpu));
+	}
+
+	for_each_possible_cpu(cpu) {
+		WARN(!cpu_port_is_valid(&cpu_port[cpu]),
+			"CPU %u does not have an associated CCI port\n",
+			cpu);
+	}
+}
+/*
+ * Functions to enable/disable a CCI interconnect slave port
+ *
+ * They are called by low-level power management code to disable slave
+ * interfaces snoops and DVM broadcast.
+ * Since they may execute with cache data allocation disabled and
+ * after the caches have been cleaned and invalidated the functions provide
+ * no explicit locking since they may run with D-cache disabled, so normal
+ * cacheable kernel locks based on ldrex/strex may not work.
+ * Locking has to be provided by BSP implementations to ensure proper
+ * operations.
+ */
+
+/**
+ * cci_port_control() - function to control a CCI port
+ *
+ * @port: index of the port to setup
+ * @enable: if true enables the port, if false disables it
+ */
+static void notrace cci_port_control(unsigned int port, bool enable)
+{
+	void __iomem *base = ports[port].base;
+
+	writel_relaxed(enable ? CCI_ENABLE_REQ : 0, base + CCI_PORT_CTRL);
+	/*
+	 * This function is called from power down procedures
+	 * and must not execute any instruction that might
+	 * cause the processor to be put in a quiescent state
+	 * (eg wfi). Hence, cpu_relax() can not be added to this
+	 * read loop to optimize power, since it might hide possibly
+	 * disruptive operations.
+	 */
+	while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1)
+			;
+}
+
+/**
+ * cci_disable_port_by_cpu() - function to disable a CCI port by CPU
+ *			       reference
+ *
+ * @mpidr: mpidr of the CPU whose CCI port should be disabled
+ *
+ * Disabling a CCI port for a CPU implies disabling the CCI port
+ * controlling that CPU cluster. Code disabling CPU CCI ports
+ * must make sure that the CPU running the code is the last active CPU
+ * in the cluster ie all other CPUs are quiescent in a low power state.
+ *
+ * Return:
+ *	0 on success
+ *	-ENODEV on port look-up failure
+ */
+int notrace cci_disable_port_by_cpu(u64 mpidr)
+{
+	int cpu;
+	bool is_valid;
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+		is_valid = cpu_port_is_valid(&cpu_port[cpu]);
+		if (is_valid && cpu_port_match(&cpu_port[cpu], mpidr)) {
+			cci_port_control(cpu_port[cpu].port, false);
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu);
+
+/**
+ * cci_enable_port_for_self() - enable a CCI port for calling CPU
+ *
+ * Enabling a CCI port for the calling CPU implies enabling the CCI
+ * port controlling that CPU's cluster. Caller must make sure that the
+ * CPU running the code is the first active CPU in the cluster and all
+ * other CPUs are quiescent in a low power state  or waiting for this CPU
+ * to complete the CCI initialization.
+ *
+ * Because this is called when the MMU is still off and with no stack,
+ * the code must be position independent and ideally rely on callee
+ * clobbered registers only.  To achieve this we must code this function
+ * entirely in assembler.
+ *
+ * On success this returns with the proper CCI port enabled.  In case of
+ * any failure this never returns as the inability to enable the CCI is
+ * fatal and there is no possible recovery at this stage.
+ */
+asmlinkage void __naked cci_enable_port_for_self(void)
+{
+	asm volatile ("\n"
+
+"	mrc	p15, 0, r0, c0, c0, 5	@ get MPIDR value \n"
+"	and	r0, r0, #"__stringify(MPIDR_HWID_BITMASK)" \n"
+"	adr	r1, 5f \n"
+"	ldr	r2, [r1] \n"
+"	add	r1, r1, r2		@ &cpu_port \n"
+"	add	ip, r1, %[sizeof_cpu_port] \n"
+
+	/* Loop over the cpu_port array looking for a matching MPIDR */
+"1:	ldr	r2, [r1, %[offsetof_cpu_port_mpidr_lsb]] \n"
+"	cmp	r2, r0 			@ compare MPIDR \n"
+"	bne	2f \n"
+
+	/* Found a match, now test port validity */
+"	ldr	r3, [r1, %[offsetof_cpu_port_port]] \n"
+"	tst	r3, #"__stringify(PORT_VALID)" \n"
+"	bne	3f \n"
+
+	/* no match, loop with the next cpu_port entry */
+"2:	add	r1, r1, %[sizeof_struct_cpu_port] \n"
+"	cmp	r1, ip			@ done? \n"
+"	blo	1b \n"
+
+	/* CCI port not found -- cheaply try to stall this CPU */
+"cci_port_not_found: \n"
+"	wfi \n"
+"	wfe \n"
+"	b	cci_port_not_found \n"
+
+	/* Use matched port index to look up the corresponding ports entry */
+"3:	bic	r3, r3, #"__stringify(PORT_VALID)" \n"
+"	adr	r0, 6f \n"
+"	ldmia	r0, {r1, r2} \n"
+"	sub	r1, r1, r0 		@ virt - phys \n"
+"	ldr	r0, [r0, r2] 		@ *(&ports) \n"
+"	mov	r2, %[sizeof_struct_ace_port] \n"
+"	mla	r0, r2, r3, r0		@ &ports[index] \n"
+"	sub	r0, r0, r1		@ virt_to_phys() \n"
+
+	/* Enable the CCI port */
+"	ldr	r0, [r0, %[offsetof_port_phys]] \n"
+"	mov	r3, #"__stringify(CCI_ENABLE_REQ)" \n"
+"	str	r3, [r0, #"__stringify(CCI_PORT_CTRL)"] \n"
+
+	/* poll the status reg for completion */
+"	adr	r1, 7f \n"
+"	ldr	r0, [r1] \n"
+"	ldr	r0, [r0, r1]		@ cci_ctrl_base \n"
+"4:	ldr	r1, [r0, #"__stringify(CCI_CTRL_STATUS)"] \n"
+"	tst	r1, #1 \n"
+"	bne	4b \n"
+
+"	mov	r0, #0 \n"
+"	bx	lr \n"
+
+"	.align	2 \n"
+"5:	.word	cpu_port - . \n"
+"6:	.word	. \n"
+"	.word	ports - 6b \n"
+"7:	.word	cci_ctrl_phys - . \n"
+	: :
+	[sizeof_cpu_port] "i" (sizeof(cpu_port)),
+#ifndef __ARMEB__
+	[offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)),
+#else
+	[offsetof_cpu_port_mpidr_lsb] "i" (offsetof(struct cpu_port, mpidr)+4),
+#endif
+	[offsetof_cpu_port_port] "i" (offsetof(struct cpu_port, port)),
+	[sizeof_struct_cpu_port] "i" (sizeof(struct cpu_port)),
+	[sizeof_struct_ace_port] "i" (sizeof(struct cci_ace_port)),
+	[offsetof_port_phys] "i" (offsetof(struct cci_ace_port, phys)) );
+
+	unreachable();
+}
+
+/**
+ * __cci_control_port_by_device() - function to control a CCI port by device
+ *				    reference
+ *
+ * @dn: device node pointer of the device whose CCI port should be
+ *      controlled
+ * @enable: if true enables the port, if false disables it
+ *
+ * Return:
+ *	0 on success
+ *	-ENODEV on port look-up failure
+ */
+int notrace __cci_control_port_by_device(struct device_node *dn, bool enable)
+{
+	int port;
+
+	if (!dn)
+		return -ENODEV;
+
+	port = __cci_ace_get_port(dn, ACE_LITE_PORT);
+	if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n",
+				dn->full_name))
+		return -ENODEV;
+	cci_port_control(port, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__cci_control_port_by_device);
+
+/**
+ * __cci_control_port_by_index() - function to control a CCI port by port index
+ *
+ * @port: port index previously retrieved with cci_ace_get_port()
+ * @enable: if true enables the port, if false disables it
+ *
+ * Return:
+ *	0 on success
+ *	-ENODEV on port index out of range
+ *	-EPERM if operation carried out on an ACE PORT
+ */
+int notrace __cci_control_port_by_index(u32 port, bool enable)
+{
+	if (port >= nb_cci_ports || ports[port].type == ACE_INVALID_PORT)
+		return -ENODEV;
+	/*
+	 * CCI control for ports connected to CPUS is extremely fragile
+	 * and must be made to go through a specific and controlled
+	 * interface (ie cci_disable_port_by_cpu(); control by general purpose
+	 * indexing is therefore disabled for ACE ports.
+	 */
+	if (ports[port].type == ACE_PORT)
+		return -EPERM;
+
+	cci_port_control(port, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__cci_control_port_by_index);
+
+static const struct cci_nb_ports cci400_ports = {
+	.nb_ace = 2,
+	.nb_ace_lite = 3
+};
+
+static const struct of_device_id arm_cci_matches[] = {
+	{.compatible = "arm,cci-400", .data = &cci400_ports },
+	{},
+};
+
+static const struct of_device_id arm_cci_ctrl_if_matches[] = {
+	{.compatible = "arm,cci-400-ctrl-if", },
+	{},
+};
+
+static int __init cci_probe(void)
+{
+	struct cci_nb_ports const *cci_config;
+	int ret, i, nb_ace = 0, nb_ace_lite = 0;
+	struct device_node *np, *cp;
+	struct resource res;
+	const char *match_str;
+	bool is_ace;
+
+	np = of_find_matching_node(NULL, arm_cci_matches);
+	if (!np)
+		return -ENODEV;
+
+	cci_config = of_match_node(arm_cci_matches, np)->data;
+	if (!cci_config)
+		return -ENODEV;
+
+	nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite;
+
+	ports = kcalloc(sizeof(*ports), nb_cci_ports, GFP_KERNEL);
+	if (!ports)
+		return -ENOMEM;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (!ret) {
+		cci_ctrl_base = ioremap(res.start, resource_size(&res));
+		cci_ctrl_phys =	res.start;
+	}
+	if (ret || !cci_ctrl_base) {
+		WARN(1, "unable to ioremap CCI ctrl\n");
+		ret = -ENXIO;
+		goto memalloc_err;
+	}
+
+	for_each_child_of_node(np, cp) {
+		if (!of_match_node(arm_cci_ctrl_if_matches, cp))
+			continue;
+
+		i = nb_ace + nb_ace_lite;
+
+		if (i >= nb_cci_ports)
+			break;
+
+		if (of_property_read_string(cp, "interface-type",
+					&match_str)) {
+			WARN(1, "node %s missing interface-type property\n",
+				  cp->full_name);
+			continue;
+		}
+		is_ace = strcmp(match_str, "ace") == 0;
+		if (!is_ace && strcmp(match_str, "ace-lite")) {
+			WARN(1, "node %s containing invalid interface-type property, skipping it\n",
+					cp->full_name);
+			continue;
+		}
+
+		ret = of_address_to_resource(cp, 0, &res);
+		if (!ret) {
+			ports[i].base = ioremap(res.start, resource_size(&res));
+			ports[i].phys = res.start;
+		}
+		if (ret || !ports[i].base) {
+			WARN(1, "unable to ioremap CCI port %d\n", i);
+			continue;
+		}
+
+		if (is_ace) {
+			if (WARN_ON(nb_ace >= cci_config->nb_ace))
+				continue;
+			ports[i].type = ACE_PORT;
+			++nb_ace;
+		} else {
+			if (WARN_ON(nb_ace_lite >= cci_config->nb_ace_lite))
+				continue;
+			ports[i].type = ACE_LITE_PORT;
+			++nb_ace_lite;
+		}
+		ports[i].dn = cp;
+	}
+
+	 /* initialize a stashed array of ACE ports to speed-up look-up */
+	cci_ace_init_ports();
+
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure it reaches main memory.
+	 */
+	sync_cache_w(&cci_ctrl_base);
+	sync_cache_w(&cci_ctrl_phys);
+	sync_cache_w(&ports);
+	sync_cache_w(&cpu_port);
+	__sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports);
+	pr_info("ARM CCI driver probed\n");
+	return 0;
+
+memalloc_err:
+
+	kfree(ports);
+	return ret;
+}
+
+static int cci_init_status = -EAGAIN;
+static DEFINE_MUTEX(cci_probing);
+
+static int __init cci_init(void)
+{
+	if (cci_init_status != -EAGAIN)
+		return cci_init_status;
+
+	mutex_lock(&cci_probing);
+	if (cci_init_status == -EAGAIN)
+		cci_init_status = cci_probe();
+	mutex_unlock(&cci_probing);
+	return cci_init_status;
+}
+
+/*
+ * To sort out early init calls ordering a helper function is provided to
+ * check if the CCI driver has beed initialized. Function check if the driver
+ * has been initialized, if not it calls the init function that probes
+ * the driver and updates the return value.
+ */
+bool __init cci_probed(void)
+{
+	return cci_init() == 0;
+}
+EXPORT_SYMBOL_GPL(cci_probed);
+
+early_initcall(cci_init);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ARM CCI support");