cdx: add support for bus enable and disable

CDX bus needs to be disabled before updating/writing devices
in the FPGA. Once the devices are written, the bus shall be
rescanned. This change provides sysfs entry to enable/disable the
CDX bus.

Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-6-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 108 insertions, 0 deletions

diff --git a/drivers/cdx/controller/cdx_controller.c b/drivers/cdx/controller/cdx_controller.c
index b4e0d6b40339..f2a691efd1f1 100644
--- a/drivers/cdx/controller/cdx_controller.c
+++ b/drivers/cdx/controller/cdx_controller.c
@@ -33,6 +33,16 @@ static const struct cdx_mcdi_ops mcdi_ops = {
 	.mcdi_request = cdx_mcdi_request,
 };
 
+static int cdx_bus_enable(struct cdx_controller *cdx, u8 bus_num)
+{
+	return cdx_mcdi_bus_enable(cdx->priv, bus_num);
+}
+
+static int cdx_bus_disable(struct cdx_controller *cdx, u8 bus_num)
+{
+	return cdx_mcdi_bus_disable(cdx->priv, bus_num);
+}
+
 void cdx_rpmsg_post_probe(struct cdx_controller *cdx)
 {
 	/* Register CDX controller with CDX bus driver */
@@ -128,6 +138,8 @@ static int cdx_scan_devices(struct cdx_controller *cdx)
 }
 
 static struct cdx_ops cdx_ops = {
+	.bus_enable		= cdx_bus_enable,
+	.bus_disable	= cdx_bus_disable,
 	.scan		= cdx_scan_devices,
 	.dev_configure	= cdx_configure_device,
 };
diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h
index 4ccb7b52951b..2de019406b57 100644
--- a/drivers/cdx/controller/mc_cdx_pcol.h
+++ b/drivers/cdx/controller/mc_cdx_pcol.h
@@ -457,6 +457,60 @@
 
 /***********************************/
 /*
+ * MC_CMD_CDX_BUS_DOWN
+ * Asserting reset on the CDX bus causes all devices on the bus to be quiesced.
+ * DMA bus mastering is disabled and any pending DMA request are flushed. Once
+ * the response is returned, the devices are guaranteed to no longer issue DMA
+ * requests or raise MSI interrupts. Further device MMIO accesses may have
+ * undefined results. While the bus reset is asserted, any of the enumeration
+ * or device configuration MCDIs will fail with EAGAIN. It is only legal to
+ * reload the relevant PL region containing CDX devices if the corresponding CDX
+ * bus is in reset. Depending on the implementation, the firmware may or may
+ * not enforce this restriction and it is up to the caller to make sure this
+ * requirement is satisfied.
+ */
+#define MC_CMD_CDX_BUS_DOWN					0x4
+#define MC_CMD_CDX_BUS_DOWN_MSGSET			0x4
+
+/* MC_CMD_CDX_BUS_DOWN_IN msgrequest */
+#define MC_CMD_CDX_BUS_DOWN_IN_LEN			4
+/* Bus number to put in reset, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_BUS_DOWN_IN_BUS_OFST		0
+#define MC_CMD_CDX_BUS_DOWN_IN_BUS_LEN		4
+
+/*
+ * MC_CMD_CDX_BUS_DOWN_OUT msgresponse: The bus is quiesced, no further
+ * upstream traffic for devices on this bus.
+ */
+#define MC_CMD_CDX_BUS_DOWN_OUT_LEN			0
+
+/***********************************/
+/*
+ * MC_CMD_CDX_BUS_UP
+ * After bus reset is de-asserted, devices are in a state which is functionally
+ * equivalent to each device having been reset with MC_CMD_CDX_DEVICE_RESET. In
+ * other words, device logic is reset in a hardware-specific way, MMIO accesses
+ * are forwarded to the device, DMA bus mastering is disabled and needs to be
+ * re-enabled with MC_CMD_CDX_DEVICE_DMA_ENABLE once the driver is ready to
+ * start servicing DMA. If the underlying number of devices or device resources
+ * changed (e.g. if PL was reloaded) while the bus was in reset, the bus driver
+ * is expected to re-enumerate the bus. Returns EALREADY if the bus was already
+ * up before the call.
+ */
+#define MC_CMD_CDX_BUS_UP					0x5
+#define MC_CMD_CDX_BUS_UP_MSGSET			0x5
+
+/* MC_CMD_CDX_BUS_UP_IN msgrequest */
+#define MC_CMD_CDX_BUS_UP_IN_LEN			4
+/* Bus number to take out of reset, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_BUS_UP_IN_BUS_OFST		0
+#define MC_CMD_CDX_BUS_UP_IN_BUS_LEN		4
+
+/* MC_CMD_CDX_BUS_UP_OUT msgresponse: The bus can now be enumerated. */
+#define MC_CMD_CDX_BUS_UP_OUT_LEN			0
+
+/***********************************/
+/*
  * MC_CMD_CDX_DEVICE_RESET
  * After this call completes, device DMA and interrupts are quiesced, devices
  * logic is reset in a hardware-specific way and DMA bus mastering is disabled.
diff --git a/drivers/cdx/controller/mcdi_functions.c b/drivers/cdx/controller/mcdi_functions.c
index 0158f26533dd..0e1e35d91242 100644
--- a/drivers/cdx/controller/mcdi_functions.c
+++ b/drivers/cdx/controller/mcdi_functions.c
@@ -124,6 +124,30 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx,
 	return 0;
 }
 
+int cdx_mcdi_bus_enable(struct cdx_mcdi *cdx, u8 bus_num)
+{
+	MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_UP_IN_LEN);
+	int ret;
+
+	MCDI_SET_DWORD(inbuf, CDX_BUS_UP_IN_BUS, bus_num);
+	ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_UP, inbuf, sizeof(inbuf),
+			   NULL, 0, NULL);
+
+	return ret;
+}
+
+int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num)
+{
+	MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_DOWN_IN_LEN);
+	int ret;
+
+	MCDI_SET_DWORD(inbuf, CDX_BUS_DOWN_IN_BUS, bus_num);
+	ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_DOWN, inbuf, sizeof(inbuf),
+			   NULL, 0, NULL);
+
+	return ret;
+}
+
 int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num)
 {
 	MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_RESET_IN_LEN);
diff --git a/drivers/cdx/controller/mcdi_functions.h b/drivers/cdx/controller/mcdi_functions.h
index 7440ace5539a..28973d5ec3ab 100644
--- a/drivers/cdx/controller/mcdi_functions.h
+++ b/drivers/cdx/controller/mcdi_functions.h
@@ -48,6 +48,24 @@ int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx,
 			    struct cdx_dev_params *dev_params);
 
 /**
+ * cdx_mcdi_bus_enable - Enable CDX bus represented by bus_num
+ * @cdx: pointer to MCDI interface.
+ * @bus_num: Bus number.
+ *
+ * Return: 0 on success, <0 on failure
+ */
+int cdx_mcdi_bus_enable(struct cdx_mcdi *cdx, u8 bus_num);
+
+/**
+ * cdx_mcdi_bus_disable - Disable CDX bus represented by bus_num
+ * @cdx: pointer to MCDI interface.
+ * @bus_num: Bus number.
+ *
+ * Return: 0 on success, <0 on failure
+ */
+int cdx_mcdi_bus_disable(struct cdx_mcdi *cdx, u8 bus_num);
+
+/**
  * cdx_mcdi_reset_device - Reset cdx device represented by bus_num:dev_num
  * @cdx: pointer to MCDI interface.
  * @bus_num: Bus number.