diff options
author | 2016-01-12 01:08:47 +0100 | |
---|---|---|
committer | 2016-01-12 01:08:47 +0100 | |
commit | 1e3f28a552c7acf6dd8acfe505beb4990e8cbd55 (patch) | |
tree | c501d538faa010b2a503ab79aba104bf12e76a12 /drivers/dma | |
parent | Merge branch 'device-properties' (diff) | |
parent | PM / clk: don't leave clocks enabled when driver not bound (diff) | |
download | linux-1e3f28a552c7acf6dd8acfe505beb4990e8cbd55.tar.gz linux-1e3f28a552c7acf6dd8acfe505beb4990e8cbd55.tar.bz2 linux-1e3f28a552c7acf6dd8acfe505beb4990e8cbd55.zip |
Merge branch 'acpi-soc'
* acpi-soc:
PM / clk: don't leave clocks enabled when driver not bound
i2c: dw: Add APM X-Gene ACPI I2C device support
ACPI / APD: Add APM X-Gene ACPI I2C device support
ACPI / LPSS: change 'does not have' to 'has' in comment
Revert "dmaengine: dw: platform: provide platform data for Intel"
dmaengine: dw: return immediately from IRQ when DMA isn't in use
dmaengine: dw: platform: power on device on shutdown
ACPI / LPSS: override power state for LPSS DMA device
ACPI / LPSS: power on when probe() and otherwise when remove()
ACPI / LPSS: do delay for all LPSS devices when D3->D0
ACPI / LPSS: allow to use specific PM domain during ->probe()
Revert "ACPI / LPSS: allow to use specific PM domain during ->probe()"
device core: add BUS_NOTIFY_DRIVER_NOT_BOUND notification
x86/platform/iosf_mbi: Remove duplicate definitions
Conflicts:
drivers/i2c/busses/i2c-designware-platdrv.c
Diffstat (limited to 'drivers/dma')
-rw-r--r-- | drivers/dma/dw/core.c | 9 | ||||
-rw-r--r-- | drivers/dma/dw/platform.c | 29 |
2 files changed, 20 insertions, 18 deletions
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 7067b6ddc1db..8b20930ade98 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -622,12 +622,17 @@ static void dw_dma_tasklet(unsigned long data) static irqreturn_t dw_dma_interrupt(int irq, void *dev_id) { struct dw_dma *dw = dev_id; - u32 status = dma_readl(dw, STATUS_INT); + u32 status; + /* Check if we have any interrupt from the DMAC which is not in use */ + if (!dw->in_use) + return IRQ_NONE; + + status = dma_readl(dw, STATUS_INT); dev_vdbg(dw->dma.dev, "%s: status=0x%x\n", __func__, status); /* Check if we have any interrupt from the DMAC */ - if (!status || !dw->in_use) + if (!status) return IRQ_NONE; /* diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c index 68a4815750b5..127093a0c0e8 100644 --- a/drivers/dma/dw/platform.c +++ b/drivers/dma/dw/platform.c @@ -155,7 +155,6 @@ static int dw_probe(struct platform_device *pdev) struct dw_dma_chip *chip; struct device *dev = &pdev->dev; struct resource *mem; - const struct acpi_device_id *id; struct dw_dma_platform_data *pdata; int err; @@ -179,11 +178,6 @@ static int dw_probe(struct platform_device *pdev) pdata = dev_get_platdata(dev); if (!pdata) pdata = dw_dma_parse_dt(pdev); - if (!pdata && has_acpi_companion(dev)) { - id = acpi_match_device(dev->driver->acpi_match_table, dev); - if (id) - pdata = (struct dw_dma_platform_data *)id->driver_data; - } chip->dev = dev; @@ -239,7 +233,19 @@ static void dw_shutdown(struct platform_device *pdev) { struct dw_dma_chip *chip = platform_get_drvdata(pdev); + /* + * We have to call dw_dma_disable() to stop any ongoing transfer. On + * some platforms we can't do that since DMA device is powered off. + * Moreover we have no possibility to check if the platform is affected + * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() + * unconditionally. On the other hand we can't use + * pm_runtime_suspended() because runtime PM framework is not fully + * used by the driver. + */ + pm_runtime_get_sync(chip->dev); dw_dma_disable(chip); + pm_runtime_put_sync_suspend(chip->dev); + clk_disable_unprepare(chip->clk); } @@ -252,17 +258,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); #endif #ifdef CONFIG_ACPI -static struct dw_dma_platform_data dw_dma_acpi_pdata = { - .nr_channels = 8, - .is_private = true, - .chan_allocation_order = CHAN_ALLOCATION_ASCENDING, - .chan_priority = CHAN_PRIORITY_ASCENDING, - .block_size = 4095, - .nr_masters = 2, -}; - static const struct acpi_device_id dw_dma_acpi_id_table[] = { - { "INTL9C60", (kernel_ulong_t)&dw_dma_acpi_pdata }, + { "INTL9C60", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); |