diff options
author | 2017-10-19 18:07:09 +0200 | |
---|---|---|
committer | 2017-10-19 18:07:09 +0200 | |
commit | e7ffa44d37cdb8b43bcb6f49eb227bb340dda22d (patch) | |
tree | a3e50d8f2e305d64e058075c50d10bf3cbe8116a /drivers/irqchip | |
parent | Merge tag 'renesas-soc-for-v4.15' of https://git.kernel.org/pub/scm/linux/ker... (diff) | |
parent | ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping (diff) | |
download | linux-e7ffa44d37cdb8b43bcb6f49eb227bb340dda22d.tar.gz linux-e7ffa44d37cdb8b43bcb6f49eb227bb340dda22d.tar.bz2 linux-e7ffa44d37cdb8b43bcb6f49eb227bb340dda22d.zip |
Merge tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux into next/soc
Pull "Broadcom soc changes for 4.15 (part 1)" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC/Kconfig changes for 4.15
please pull the following:
- Danilo removes the clock provider driver stubs which are no longer needed
now that we have a proper CPRMAN clock provider driver
- Stefan moves the SMP startup code for BCM2836 from the interrupt controller
driver down to where it belongs in the architecture code, this was requested
by Marc Zyngier before comitting any fixes to that code
- Phil provides a fix for a future Raspberry Pi firmware which will make the
secondary cores wait for an event and therefore requires the CPU onlining
other cores to send such event (along with the appropriate barrier)
- Florian fixes the BRCMSTB UART debug stub to work correctly when using an
ARM BE8 kernel since there were some missing register read swapping needed
* tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux:
ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping
ARM: bcm2836: Send event when onlining other cores
irqchip: bcm2836: Move SMP startup code to arch/arm (v2)
clk: bcm2835: remove remains from stub clk driver
Diffstat (limited to 'drivers/irqchip')
-rw-r--r-- | drivers/irqchip/irq-bcm2836.c | 79 |
1 files changed, 2 insertions, 77 deletions
diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c index dc8c1e3eafe7..667b9e14b032 100644 --- a/drivers/irqchip/irq-bcm2836.c +++ b/drivers/irqchip/irq-bcm2836.c @@ -19,62 +19,9 @@ #include <linux/of_irq.h> #include <linux/irqchip.h> #include <linux/irqdomain.h> -#include <asm/exception.h> - -#define LOCAL_CONTROL 0x000 -#define LOCAL_PRESCALER 0x008 +#include <linux/irqchip/irq-bcm2836.h> -/* - * The low 2 bits identify the CPU that the GPU IRQ goes to, and the - * next 2 bits identify the CPU that the GPU FIQ goes to. - */ -#define LOCAL_GPU_ROUTING 0x00c -/* When setting bits 0-3, enables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_SET 0x010 -/* When setting bits 0-3, disables PMU interrupts on that CPU. */ -#define LOCAL_PM_ROUTING_CLR 0x014 -/* - * The low 4 bits of this are the CPU's timer IRQ enables, and the - * next 4 bits are the CPU's timer FIQ enables (which override the IRQ - * bits). - */ -#define LOCAL_TIMER_INT_CONTROL0 0x040 -/* - * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and - * the next 4 bits are the CPU's per-mailbox FIQ enables (which - * override the IRQ bits). - */ -#define LOCAL_MAILBOX_INT_CONTROL0 0x050 -/* - * The CPU's interrupt status register. Bits are defined by the the - * LOCAL_IRQ_* bits below. - */ -#define LOCAL_IRQ_PENDING0 0x060 -/* Same status bits as above, but for FIQ. */ -#define LOCAL_FIQ_PENDING0 0x070 -/* - * Mailbox write-to-set bits. There are 16 mailboxes, 4 per CPU, and - * these bits are organized by mailbox number and then CPU number. We - * use mailbox 0 for IPIs. The mailbox's interrupt is raised while - * any bit is set. - */ -#define LOCAL_MAILBOX0_SET0 0x080 -#define LOCAL_MAILBOX3_SET0 0x08c -/* Mailbox write-to-clear bits. */ -#define LOCAL_MAILBOX0_CLR0 0x0c0 -#define LOCAL_MAILBOX3_CLR0 0x0cc - -#define LOCAL_IRQ_CNTPSIRQ 0 -#define LOCAL_IRQ_CNTPNSIRQ 1 -#define LOCAL_IRQ_CNTHPIRQ 2 -#define LOCAL_IRQ_CNTVIRQ 3 -#define LOCAL_IRQ_MAILBOX0 4 -#define LOCAL_IRQ_MAILBOX1 5 -#define LOCAL_IRQ_MAILBOX2 6 -#define LOCAL_IRQ_MAILBOX3 7 -#define LOCAL_IRQ_GPU_FAST 8 -#define LOCAL_IRQ_PMU_FAST 9 -#define LAST_IRQ LOCAL_IRQ_PMU_FAST +#include <asm/exception.h> struct bcm2836_arm_irqchip_intc { struct irq_domain *domain; @@ -215,24 +162,6 @@ static int bcm2836_cpu_dying(unsigned int cpu) cpu); return 0; } - -#ifdef CONFIG_ARM -static int __init bcm2836_smp_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - unsigned long secondary_startup_phys = - (unsigned long)virt_to_phys((void *)secondary_startup); - - writel(secondary_startup_phys, - intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu); - - return 0; -} - -static const struct smp_operations bcm2836_smp_ops __initconst = { - .smp_boot_secondary = bcm2836_smp_boot_secondary, -}; -#endif #endif static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = { @@ -249,10 +178,6 @@ bcm2836_arm_irqchip_smp_init(void) bcm2836_cpu_dying); set_smp_cross_call(bcm2836_arm_irqchip_send_ipi); - -#ifdef CONFIG_ARM - smp_set_ops(&bcm2836_smp_ops); -#endif #endif } |