Merge tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fix a few memoryleaks
   - Minor improvements to the card initialization sequence
   - Partially support sleepy GPIO controllers for pwrseq eMMC

  MMC host:
   - alcor: Work with multiple-entry sglists
   - alcor: Enable DMA for writes
   - meson-gx: Improve tuning support
   - meson-gx: Avoid clock glitch when switching to DDR modes
   - meson-gx: Disable unreliable HS400 mode
   - mmci: Minor updates for support of HW busy detection
   - mmci: Support data transfers for the stm32_sdmmc variant
   - mmci: Restructure code to better support different variants
   - mtk-sd: Add support for version found on MT7620 family SOCs
   - mtk-sd: Add support for the MT8516 version
   - mtk-sd: Add Chaotian Jing as the maintainer
   - sdhci: Reorganize request-code to convert from tasklet to workqueue
   - sdhci_am654: Stabilize support for lower speed modes
   - sdhci-esdhc-imx: Add HS400 support for iMX7ULP
   - sdhci-esdhc-imx: Add support for iMX7ULP version
   - sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
   - sdhci-of-esdhc: Add support for the ls1028a version
   - sdhci-of-esdhc: Several fixups for errata
   - sdhci-pci: Fix BYT OCP setting
   - sdhci-pci: Add support for Intel CML
   - sdhci-tegra: Add support for system suspend/resume
   - sdhci-tegra: Add CQE support for Tegra186 WAR
   - sdhci-tegra: Add support for Tegra194
   - sdhci-tegra: Update HW tuning process

  MEMSTICK:
   - I volunteered to help as a maintainer for the memstick subsystem,
     which is reflected by an update to the MAINTAINERS file. Changes
     are funneled through my MMC git and we will use the linux-mmc
     mailing list.

  MEMSTICK host:
   - A few minor cleanups"

* tag 'mmc-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (87 commits)
  mmc: sdhci-pci: Fix BYT OCP setting
  dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
  mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
  mmc: mtk-sd: select REGULATOR
  mmc: mtk-sd: enable internal card-detect logic.
  mmc: mtk-sd: add support for config found in mt7620 family SOCs.
  mmc: mtk-sd: don't hard-code interrupt trigger type
  mmc: core: Fix tag set memory leak
  dt-bindings: mmc: Add support for MT8516 to mtk-sd
  mmc: mmci: Prevent polling for busy detection in IRQ context
  mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
  mmc: usdhi6rol0: mark expected switch fall-throughs
  mmc: core: Verify SD bus width
  mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
  mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
  dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
  mmc: meson-gx: add signal resampling tuning
  mmc: meson-gx: remove Rx phase tuning
  mmc: meson-gx: avoid clock glitch when switching to DDR modes
  mmc: meson-gx: disable HS400
  ...

1 files changed, 18 insertions, 0 deletions

diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c
index cfbfc6f1048f..8e83ae6920ae 100644
--- a/drivers/mmc/host/mmci_stm32_sdmmc.c
+++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
@@ -265,10 +265,28 @@ static void mmci_sdmmc_set_pwrreg(struct mmci_host *host, unsigned int pwr)
 	}
 }
 
+static u32 sdmmc_get_dctrl_cfg(struct mmci_host *host)
+{
+	u32 datactrl;
+
+	datactrl = mmci_dctrl_blksz(host);
+
+	if (host->mmc->card && mmc_card_sdio(host->mmc->card) &&
+	    host->data->blocks == 1)
+		datactrl |= MCI_DPSM_STM32_MODE_SDIO;
+	else if (host->data->stop && !host->mrq->sbc)
+		datactrl |= MCI_DPSM_STM32_MODE_BLOCK_STOP;
+	else
+		datactrl |= MCI_DPSM_STM32_MODE_BLOCK;
+
+	return datactrl;
+}
+
 static struct mmci_host_ops sdmmc_variant_ops = {
 	.validate_data = sdmmc_idma_validate_data,
 	.prep_data = sdmmc_idma_prep_data,
 	.unprep_data = sdmmc_idma_unprep_data,
+	.get_datactrl_cfg = sdmmc_get_dctrl_cfg,
 	.dma_setup = sdmmc_idma_setup,
 	.dma_start = sdmmc_idma_start,
 	.dma_finalize = sdmmc_idma_finalize,