diff options
| author |  Bjorn Helgaas <bhelgaas@google.com>
| 2024-03-27 16:48:31 -0500 |
|---|---|---|
| committer |  Ulf Hansson <ulf.hansson@linaro.org>
| 2024-04-02 12:34:06 +0200 |
| commit | f9b17ffcb52307fec34bf613a313ec087347cbb8 (patch) | |
| tree | 95faccb429d35e411a06cbd43093b9c695ab5803 /drivers/mmc | |
| parent | mmc: sdhci-pci-gli: Use PCI AER definitions, not hard-coded values (diff) | |
| download | linux-f9b17ffcb52307fec34bf613a313ec087347cbb8.tar.gz linux-f9b17ffcb52307fec34bf613a313ec087347cbb8.tar.bz2 linux-f9b17ffcb52307fec34bf613a313ec087347cbb8.zip | |
mmc: sdhci-pci-gli: Use pci_set_power_state(), not direct PMCSR writes
d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
ASPM L1.2") and 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow
GL9755 to enter ASPM L1.2") added writes to the Control register in the
Power Management Capability to put the device in D3hot and back to D0.
Use the pci_set_power_state() interface instead because these are generic
operations that don't need to be driver-specific. Also, the PCI spec
requires some delays after these power transitions, and
pci_set_power_state() takes care of those, while d7133797e9e1 and
36ed2fd32b2c did not.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240327214831.1544595-3-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-gli.c | 20 |
1 files changed, 4 insertions, 16 deletions
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 3d5543581537..0f81586a19df 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -25,9 +25,6 @@ #define GLI_9750_WT_EN_ON 0x1 #define GLI_9750_WT_EN_OFF 0x0 -#define PCI_GLI_9750_PM_CTRL 0xFC -#define PCI_GLI_9750_PM_STATE GENMASK(1, 0) - #define SDHCI_GLI_9750_CFG2 0x848 #define SDHCI_GLI_9750_CFG2_L1DLY GENMASK(28, 24) #define GLI_9750_CFG2_L1DLY_VALUE 0x1F @@ -149,9 +146,6 @@ #define PCI_GLI_9755_MISC 0x78 #define PCI_GLI_9755_MISC_SSC_OFF BIT(26) -#define PCI_GLI_9755_PM_CTRL 0xFC -#define PCI_GLI_9755_PM_STATE GENMASK(1, 0) - #define SDHCI_GLI_9767_GM_BURST_SIZE 0x510 #define SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET BIT(8) @@ -556,11 +550,8 @@ static void gl9750_hw_setting(struct sdhci_host *host) sdhci_writel(host, value, SDHCI_GLI_9750_CFG2); /* toggle PM state to allow GL9750 to enter ASPM L1.2 */ - pci_read_config_dword(pdev, PCI_GLI_9750_PM_CTRL, &value); - value |= PCI_GLI_9750_PM_STATE; - pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value); - value &= ~PCI_GLI_9750_PM_STATE; - pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value); + pci_set_power_state(pdev, PCI_D3hot); + pci_set_power_state(pdev, PCI_D0); /* mask the replay timer timeout of AER */ aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); @@ -774,11 +765,8 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot) pci_write_config_dword(pdev, PCI_GLI_9755_CFG2, value); /* toggle PM state to allow GL9755 to enter ASPM L1.2 */ - pci_read_config_dword(pdev, PCI_GLI_9755_PM_CTRL, &value); - value |= PCI_GLI_9755_PM_STATE; - pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value); - value &= ~PCI_GLI_9755_PM_STATE; - pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value); + pci_set_power_state(pdev, PCI_D3hot); + pci_set_power_state(pdev, PCI_D0); /* mask the replay timer timeout of AER */ aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); |