diff options
| author |  Brian Norris <computersforpeace@gmail.com>
| 2011-08-30 18:45:37 -0700 |
|---|---|---|
| committer |  Artem Bityutskiy <artem.bityutskiy@intel.com>
| 2011-09-11 15:02:18 +0300 |
| commit | 9ce244b3fb416ce6600e05612ac46b9692dcc638 (patch) | |
| tree | 34b9b77f38ce65f8efe9f9f40e71efd22bc43507 /drivers/mtd | |
| parent | mtd: add the common code for GPMI-NAND controller driver (diff) | |
| download | linux-9ce244b3fb416ce6600e05612ac46b9692dcc638.tar.gz linux-9ce244b3fb416ce6600e05612ac46b9692dcc638.tar.bz2 linux-9ce244b3fb416ce6600e05612ac46b9692dcc638.zip | |
mtd: support writing OOB without ECC
This fixes issues with `nandwrite -n -o' and the MEMWRITEOOB[64] ioctls
on hardware that writes ECC when writing OOB. The problem arises as
follows: `nandwrite -n' can write page data to flash without applying
ECC, but when used with the `-o' option, ECC is applied (incorrectly),
contrary to the `--noecc' option.
I found that this is the case because my hardware computes and writes
ECC data to flash upon either OOB write or page write. Thus, to support
a proper "no ECC" write, my driver must know when we're performing a raw
OOB write vs. a normal ECC OOB write. However, MTD does not pass any raw
mode information to the write_oob functions. This patch addresses the
problems by:
1) Passing MTD_OOB_RAW down to lower layers, instead of just defaulting
to MTD_OOB_PLACE
2) Handling MTD_OOB_RAW within the NAND layer's `nand_do_write_oob'
3) Adding a new (replaceable) function pointer in struct ecc_ctrl; this
function should support writing OOB without ECC data. Current
hardware often can use the same OOB write function when writing
either with or without ECC
This was tested with nandsim as well as on actual SLC NAND.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/mtdchar.c | 3 | ||||
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 10 |
2 files changed, 11 insertions, 2 deletions
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index b20625475132..bcb7f05fd27b 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -391,6 +391,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd, uint64_t start, uint32_t length, void __user *ptr, uint32_t __user *retp) { + struct mtd_file_info *mfi = file->private_data; struct mtd_oob_ops ops; uint32_t retlen; int ret = 0; @@ -412,7 +413,7 @@ static int mtd_do_writeoob(struct file *file, struct mtd_info *mtd, ops.ooblen = length; ops.ooboffs = start & (mtd->writesize - 1); ops.datbuf = NULL; - ops.mode = MTD_OOB_PLACE; + ops.mode = (mfi->mode == MTD_MODE_RAW) ? MTD_OOB_RAW : MTD_OOB_PLACE; if (ops.ooboffs && ops.ooblen > (mtd->oobsize - ops.ooboffs)) return -EINVAL; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7f2691f94322..b61a7c7bd097 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2404,7 +2404,11 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, chip->pagebuf = -1; nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops); - status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); + + if (ops->mode == MTD_OOB_RAW) + status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask); + else + status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask); if (status) return status; @@ -3380,6 +3384,10 @@ int nand_scan_tail(struct mtd_info *mtd) BUG(); } + /* For many systems, the standard OOB write also works for raw */ + if (!chip->ecc.write_oob_raw) + chip->ecc.write_oob_raw = chip->ecc.write_oob; + /* * The number of bytes available for a client to place data into * the out of band area. |