diff options
author | 2008-03-28 09:15:03 -0700 | |
---|---|---|
committer | 2008-03-28 22:14:56 -0400 | |
commit | ad68076e07fa01bd0c98278a959d0fd2bb26f1ac (patch) | |
tree | f0b664ecdb38478f9b995aff10dcb39a09221fb6 /drivers/net/e1000e/es2lan.c | |
parent | Compilation fix for ixgbe_main.c. (diff) | |
download | linux-ad68076e07fa01bd0c98278a959d0fd2bb26f1ac.tar.gz linux-ad68076e07fa01bd0c98278a959d0fd2bb26f1ac.tar.bz2 linux-ad68076e07fa01bd0c98278a959d0fd2bb26f1ac.zip |
e1000e: reformat comment blocks, cosmetic changes only
Adjusting the comment blocks here to be code-style compliant. no
code changes.
Changed some copyright dates to 2008.
Indentation fixes.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/e1000e/es2lan.c')
-rw-r--r-- | drivers/net/e1000e/es2lan.c | 89 |
1 files changed, 52 insertions, 37 deletions
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index 88657adf965f..265775447538 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -92,7 +92,8 @@ /* In-Band Control Register (Page 194, Register 18) */ #define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */ -/* A table for the GG82563 cable length where the range is defined +/* + * A table for the GG82563 cable length where the range is defined * with a lower bound at "index" and the upper bound at * "index + 5". */ @@ -167,12 +168,13 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) break; } - nvm->type = e1000_nvm_eeprom_spi; + nvm->type = e1000_nvm_eeprom_spi; size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> E1000_EECD_SIZE_EX_SHIFT); - /* Added to a constant, "size" becomes the left-shift value + /* + * Added to a constant, "size" becomes the left-shift value * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; @@ -208,8 +210,7 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = - (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; /* check for link */ switch (hw->media_type) { @@ -344,8 +345,10 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) if (!(swfw_sync & (fwmask | swmask))) break; - /* Firmware currently using resource (fwmask) - * or other software thread using resource (swmask) */ + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ e1000e_put_hw_semaphore(hw); mdelay(5); i++; @@ -407,7 +410,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) page_select = GG82563_PHY_PAGE_SELECT; else - /* Use Alternative Page Select register to access + /* + * Use Alternative Page Select register to access * registers 30 and 31 */ page_select = GG82563_PHY_PAGE_SELECT_ALT; @@ -417,7 +421,8 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, if (ret_val) return ret_val; - /* The "ready" bit in the MDIC register may be incorrectly set + /* + * The "ready" bit in the MDIC register may be incorrectly set * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ @@ -462,7 +467,8 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) page_select = GG82563_PHY_PAGE_SELECT; else - /* Use Alternative Page Select register to access + /* + * Use Alternative Page Select register to access * registers 30 and 31 */ page_select = GG82563_PHY_PAGE_SELECT_ALT; @@ -473,7 +479,8 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, return ret_val; - /* The "ready" bit in the MDIC register may be incorrectly set + /* + * The "ready" bit in the MDIC register may be incorrectly set * before the device has completed the "Page Select" MDI * transaction. So we wait 200us after each MDI command... */ @@ -554,7 +561,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) u16 phy_data; bool link; - /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI + /* + * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI * forced whenever speed and duplex are forced. */ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); @@ -593,7 +601,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) return ret_val; if (!link) { - /* We didn't get link. + /* + * We didn't get link. * Reset the DSP and cross our fingers. */ ret_val = e1000e_phy_reset_dsp(hw); @@ -612,7 +621,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Resetting the phy means we need to verify the TX_CLK corresponds + /* + * Resetting the phy means we need to verify the TX_CLK corresponds * to the link speed. 10Mbps -> 2.5MHz, else 25MHz. */ phy_data &= ~GG82563_MSCR_TX_CLK_MASK; @@ -621,7 +631,8 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) else phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25; - /* In addition, we must re-enable CRS on Tx for both half and full + /* + * In addition, we must re-enable CRS on Tx for both half and full * duplex. */ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX; @@ -704,7 +715,8 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) u32 icr; s32 ret_val; - /* Prevent the PCI-E bus from sticking if there is no TLP connection + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection * on the last TLP read/write transaction when MAC is reset. */ ret_val = e1000e_disable_pcie_master(hw); @@ -808,7 +820,8 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) reg_data &= ~0x00100000; E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data); - /* Clear all of the statistics registers (clear on read). It is + /* + * Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there * is no link. @@ -881,7 +894,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Options: + /* + * Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -907,7 +921,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) break; } - /* Options: + /* + * Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled @@ -928,10 +943,9 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) return ret_val; } - /* Bypass RX and TX FIFO's */ - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL, - E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS | + /* Bypass Rx and Tx FIFO's */ + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL, + E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS | E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS); if (ret_val) return ret_val; @@ -953,7 +967,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - /* Do not init these registers when the HW is in IAMT mode, since the + /* + * Do not init these registers when the HW is in IAMT mode, since the * firmware will have already initialized them. We only initialize * them if the HW is not in IAMT mode. */ @@ -974,7 +989,8 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) return ret_val; } - /* Workaround: Disable padding in Kumeran interface in the MAC + /* + * Workaround: Disable padding in Kumeran interface in the MAC * and in the PHY to avoid CRC errors. */ ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data); @@ -1007,9 +1023,11 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ew32(CTRL, ctrl); - /* Set the mac to wait the maximum time between each + /* + * Set the mac to wait the maximum time between each * iteration and increase the max iterations when - * polling the phy; this fixes erroneous timeouts at 10Mbps. */ + * polling the phy; this fixes erroneous timeouts at 10Mbps. + */ ret_val = e1000e_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF); if (ret_val) return ret_val; @@ -1026,9 +1044,8 @@ static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING; - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_OFFSET_INB_CTRL, - reg_data); + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_INB_CTRL, + reg_data); if (ret_val) return ret_val; @@ -1056,9 +1073,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex) u16 reg_data; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT; - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, - reg_data); + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, + reg_data); if (ret_val) return ret_val; @@ -1096,9 +1112,8 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw) u32 tipg; reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT; - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, - reg_data); + ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL, + reg_data); if (ret_val) return ret_val; |