cxgb4/libcxgb/cxgb4i/cxgbit: enable eDRAM page pods for iSCSI

Page pods are used for direct data placement, this patch
enables eDRAM page pods if firmware supports this feature.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 61 insertions, 0 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index cd957a1eea45..54908002c786 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -782,6 +782,40 @@ static void free_msix_queue_irqs(struct adapter *adap)
 	}
 }
 
+static int setup_ppod_edram(struct adapter *adap)
+{
+	unsigned int param, val;
+	int ret;
+
+	/* Driver sends FW_PARAMS_PARAM_DEV_PPOD_EDRAM read command to check
+	 * if firmware supports ppod edram feature or not. If firmware
+	 * returns 1, then driver can enable this feature by sending
+	 * FW_PARAMS_PARAM_DEV_PPOD_EDRAM write command with value 1 to
+	 * enable ppod edram feature.
+	 */
+	param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+		FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PPOD_EDRAM));
+
+	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+	if (ret < 0) {
+		dev_warn(adap->pdev_dev,
+			 "querying PPOD_EDRAM support failed: %d\n",
+			 ret);
+		return -1;
+	}
+
+	if (val != 1)
+		return -1;
+
+	ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+	if (ret < 0) {
+		dev_err(adap->pdev_dev,
+			"setting PPOD_EDRAM failed: %d\n", ret);
+		return -1;
+	}
+	return 0;
+}
+
 /**
  *	cxgb4_write_rss - write the RSS table for a given port
  *	@pi: the port
@@ -4166,6 +4200,13 @@ static int adap_init0_config(struct adapter *adapter, int reset)
 		dev_err(adapter->pdev_dev,
 			"HMA configuration failed with error %d\n", ret);
 
+	if (is_t6(adapter->params.chip)) {
+		ret = setup_ppod_edram(adapter);
+		if (!ret)
+			dev_info(adapter->pdev_dev, "Successfully enabled "
+				 "ppod edram feature\n");
+	}
+
 	/*
 	 * And finally tell the firmware to initialize itself using the
 	 * parameters from the Configuration File.
@@ -4789,6 +4830,22 @@ static int adap_init0(struct adapter *adap)
 			goto bye;
 		adap->vres.iscsi.start = val[0];
 		adap->vres.iscsi.size = val[1] - val[0] + 1;
+		if (is_t6(adap->params.chip)) {
+			params[0] = FW_PARAM_PFVF(PPOD_EDRAM_START);
+			params[1] = FW_PARAM_PFVF(PPOD_EDRAM_END);
+			ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 2,
+					      params, val);
+			if (!ret) {
+				adap->vres.ppod_edram.start = val[0];
+				adap->vres.ppod_edram.size =
+					val[1] - val[0] + 1;
+
+				dev_info(adap->pdev_dev,
+					 "ppod edram start 0x%x end 0x%x size 0x%x\n",
+					 val[0], val[1],
+					 adap->vres.ppod_edram.size);
+			}
+		}
 		/* LIO target and cxgb4i initiaitor */
 		adap->num_ofld_uld += 2;
 	}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
index 42ae28d651e7..cee582e36134 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h
@@ -292,6 +292,7 @@ struct cxgb4_virt_res {                      /* virtualized HW resources */
 	struct cxgb4_range ocq;
 	struct cxgb4_range key;
 	unsigned int ncrypto_fc;
+	struct cxgb4_range ppod_edram;
 };
 
 struct chcr_stats_debug {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
index 0be4ce520352..65313f6b5704 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h
@@ -1270,6 +1270,7 @@ enum fw_params_param_dev {
 	FW_PARAMS_PARAM_DEV_TPCHMAP     = 0x1F,
 	FW_PARAMS_PARAM_DEV_HMA_SIZE	= 0x20,
 	FW_PARAMS_PARAM_DEV_RDMA_WRITE_WITH_IMM = 0x21,
+	FW_PARAMS_PARAM_DEV_PPOD_EDRAM  = 0x23,
 	FW_PARAMS_PARAM_DEV_RI_WRITE_CMPL_WR    = 0x24,
 	FW_PARAMS_PARAM_DEV_OPAQUE_VIID_SMT_EXTN = 0x27,
 	FW_PARAMS_PARAM_DEV_HASHFILTER_WITH_OFLD = 0x28,
@@ -1332,6 +1333,8 @@ enum fw_params_param_pfvf {
 	FW_PARAMS_PARAM_PFVF_RAWF_END = 0x37,
 	FW_PARAMS_PARAM_PFVF_NCRYPTO_LOOKASIDE = 0x39,
 	FW_PARAMS_PARAM_PFVF_PORT_CAPS32 = 0x3A,
+	FW_PARAMS_PARAM_PFVF_PPOD_EDRAM_START = 0x3B,
+	FW_PARAMS_PARAM_PFVF_PPOD_EDRAM_END = 0x3C,
 	FW_PARAMS_PARAM_PFVF_LINK_STATE = 0x40,
 };