igc: enable auxiliary PHC functions for the i225

The i225 device offers a number of special PTP Hardware Clock features on
the Software Defined Pins (SDPs) - much like i210, which is used as
inspiration for this patch. It enables two possible functions, namely
time stamping external events and periodic output signals.

The assignment of PHC functions to the four SDP can be freely chosen by
the user.

For the external events time stamping, when the SDP (configured as input
by user) level changes, an interrupt is generated and the kernel
Precision Time Protocol (PTP) is informed.

For the periodic output signals, the i225 is configured to generate them
(so the SDP level will change periodically) and the driver also has to
keep updating the time of the next level change. However, this work is
not necessary for some frequencies as the i225 takes care of them
(namely, anything with a half-cycle of 500ms, 250ms, 125ms or < 70ms).

While i225 allows up to four timers to be used to source the time used
on the external events or output signals, this patch uses only one of
those timers. Main reason is to keep it simple, as it's not clear how
these extra timers would be exposed to users. Note that currently a NIC
can expose a single PTP device.

Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 10 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/igc/igc_regs.h b/drivers/net/ethernet/intel/igc/igc_regs.h
index 3e5cb7aef9da..cc174853554b 100644
--- a/drivers/net/ethernet/intel/igc/igc_regs.h
+++ b/drivers/net/ethernet/intel/igc/igc_regs.h
@@ -192,6 +192,16 @@
 #define IGC_TSYNCTXCTL	0x0B614  /* Tx Time Sync Control register - RW */
 #define IGC_TSYNCRXCFG	0x05F50  /* Time Sync Rx Configuration - RW */
 #define IGC_TSSDP	0x0003C  /* Time Sync SDP Configuration Register - RW */
+#define IGC_TRGTTIML0	0x0B644 /* Target Time Register 0 Low  - RW */
+#define IGC_TRGTTIMH0	0x0B648 /* Target Time Register 0 High - RW */
+#define IGC_TRGTTIML1	0x0B64C /* Target Time Register 1 Low  - RW */
+#define IGC_TRGTTIMH1	0x0B650 /* Target Time Register 1 High - RW */
+#define IGC_FREQOUT0	0x0B654 /* Frequency Out 0 Control Register - RW */
+#define IGC_FREQOUT1	0x0B658 /* Frequency Out 1 Control Register - RW */
+#define IGC_AUXSTMPL0	0x0B65C /* Auxiliary Time Stamp 0 Register Low  - RO */
+#define IGC_AUXSTMPH0	0x0B660 /* Auxiliary Time Stamp 0 Register High - RO */
+#define IGC_AUXSTMPL1	0x0B664 /* Auxiliary Time Stamp 1 Register Low  - RO */
+#define IGC_AUXSTMPH1	0x0B668 /* Auxiliary Time Stamp 1 Register High - RO */
 
 #define IGC_IMIR(_i)	(0x05A80 + ((_i) * 4))  /* Immediate Interrupt */
 #define IGC_IMIREXT(_i)	(0x05AA0 + ((_i) * 4))  /* Immediate INTR Ext*/