diff options
author | 2006-09-13 13:24:59 -0400 | |
---|---|---|
committer | 2006-09-13 13:24:59 -0400 | |
commit | 6aa20a2235535605db6d6d2bd850298b2fe7f31e (patch) | |
tree | df0b855043407b831d57f2f2c271f8aab48444f4 /drivers/net/fec.c | |
parent | [PATCH] ehea: IBM eHEA Ethernet Device Driver (diff) | |
download | linux-6aa20a2235535605db6d6d2bd850298b2fe7f31e.tar.gz linux-6aa20a2235535605db6d6d2bd850298b2fe7f31e.tar.bz2 linux-6aa20a2235535605db6d6d2bd850298b2fe7f31e.zip |
drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/fec.c')
-rw-r--r-- | drivers/net/fec.c | 82 |
1 files changed, 41 insertions, 41 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 9eedb27dd695..55d86bc4c104 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -256,7 +256,7 @@ static mii_list_t *mii_free; static mii_list_t *mii_head; static mii_list_t *mii_tail; -static int mii_queue(struct net_device *dev, int request, +static int mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *)); /* Make MII read/write commands for the FEC. @@ -277,7 +277,7 @@ static int mii_queue(struct net_device *dev, int request, #define MII_REG_SR 1 /* Status Register */ #define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */ #define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */ -#define MII_REG_ANAR 4 /* A-N Advertisement Register */ +#define MII_REG_ANAR 4 /* A-N Advertisement Register */ #define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */ #define MII_REG_ANER 6 /* A-N Expansion Register */ #define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */ @@ -289,18 +289,18 @@ static int mii_queue(struct net_device *dev, int request, #define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ #define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ #define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ +#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ #define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ +#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ #define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ #define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ #define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ #define PHY_STAT_SPMASK 0xf000 /* mask for speed */ #define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ +#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ #define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ +#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ static int @@ -360,7 +360,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) fep->stats.tx_bytes += skb->len; fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK; - + /* Push the data cache so the CPM does not get stale memory * data. */ @@ -422,7 +422,7 @@ fec_timeout(struct net_device *dev) bdp = fep->tx_bd_base; printk(" tx: %u buffers\n", TX_RING_SIZE); for (i = 0 ; i < TX_RING_SIZE; i++) { - printk(" %08x: %04x %04x %08x\n", + printk(" %08x: %04x %04x %08x\n", (uint) bdp, bdp->cbd_sc, bdp->cbd_datlen, @@ -484,7 +484,7 @@ fec_enet_interrupt(int irq, void * dev_id, struct pt_regs * regs) handled = 1; fec_enet_mii(dev); } - + } return IRQ_RETVAL(handled); } @@ -534,20 +534,20 @@ fec_enet_tx(struct net_device *dev) */ if (status & BD_ENET_TX_DEF) fep->stats.collisions++; - + /* Free the sk buffer associated with this last transmit. */ dev_kfree_skb_any(skb); fep->tx_skbuff[fep->skb_dirty] = NULL; fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK; - + /* Update pointer to next buffer descriptor to be transmitted. */ if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; else bdp++; - + /* Since we have freed up a buffer, the ring is no longer * full. */ @@ -577,10 +577,10 @@ fec_enet_rx(struct net_device *dev) struct sk_buff *skb; ushort pkt_len; __u8 *data; - + #ifdef CONFIG_M532x flush_cache_all(); -#endif +#endif fep = netdev_priv(dev); fecp = (volatile fec_t*)dev->base_addr; @@ -606,7 +606,7 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { /* Check for errors. */ if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { - fep->stats.rx_errors++; + fep->stats.rx_errors++; if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { /* Frame too long or too short. */ fep->stats.rx_length_errors++; @@ -670,7 +670,7 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { bdp = fep->rx_bd_base; else bdp++; - + #if 1 /* Doing this here will keep the FEC running while we process * incoming frames. On a heavily loaded network, we should be @@ -708,7 +708,7 @@ fec_enet_mii(struct net_device *dev) mii_reg = ep->fec_mii_data; spin_lock(&fep->lock); - + if ((mip = mii_head) == NULL) { printk("MII and no head!\n"); goto unlock; @@ -886,14 +886,14 @@ static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ { mk_mii_end, } }; static phy_info_t const phy_info_lxt970 = { - .id = 0x07810000, + .id = 0x07810000, .name = "LXT970", .config = phy_cmd_lxt970_config, .startup = phy_cmd_lxt970_startup, .ack_int = phy_cmd_lxt970_ack_int, .shutdown = phy_cmd_lxt970_shutdown }; - + /* ------------------------------------------------------------------------- */ /* The Level one LXT971 is used on some of my custom boards */ @@ -906,7 +906,7 @@ static phy_info_t const phy_info_lxt970 = { #define MII_LXT971_LCR 20 /* LED Control Register */ #define MII_LXT971_TCR 30 /* Transmit Control Register */ -/* +/* * I had some nice ideas of running the MDIO faster... * The 971 should support 8MHz and I tried it, but things acted really * weird, so 2.5 MHz ought to be enough for anyone... @@ -944,9 +944,9 @@ static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) *s = status; } - + static phy_cmd_t const phy_cmd_lxt971_config[] = { - /* limit to 10MBit because my prototype board + /* limit to 10MBit because my prototype board * doesn't work with 100. */ { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, @@ -960,7 +960,7 @@ static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ /* Somehow does the 971 tell me that the link is down * the first read after power-up. * read here to get a valid value in ack_int */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { @@ -976,7 +976,7 @@ static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ { mk_mii_end, } }; static phy_info_t const phy_info_lxt971 = { - .id = 0x0001378e, + .id = 0x0001378e, .name = "LXT971", .config = phy_cmd_lxt971_config, .startup = phy_cmd_lxt971_startup, @@ -1015,7 +1015,7 @@ static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) } static phy_cmd_t const phy_cmd_qs6612_config[] = { - /* The PHY powers up isolated on the RPX, + /* The PHY powers up isolated on the RPX, * so send a command to allow operation. */ { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL }, @@ -1045,7 +1045,7 @@ static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ { mk_mii_end, } }; static phy_info_t const phy_info_qs6612 = { - .id = 0x00181440, + .id = 0x00181440, .name = "QS6612", .config = phy_cmd_qs6612_config, .startup = phy_cmd_qs6612_startup, @@ -1093,7 +1093,7 @@ static phy_cmd_t const phy_cmd_am79c874_config[] = { static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { @@ -1135,7 +1135,7 @@ static phy_cmd_t const phy_cmd_ks8721bl_config[] = { static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ - { mk_mii_read(MII_REG_SR), mii_parse_sr }, + { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } }; static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { @@ -1150,7 +1150,7 @@ static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ { mk_mii_end, } }; static phy_info_t const phy_info_ks8721bl = { - .id = 0x00022161, + .id = 0x00022161, .name = "KS8721BL", .config = phy_cmd_ks8721bl_config, .startup = phy_cmd_ks8721bl_startup, @@ -1420,7 +1420,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) { volatile u16 *gpio_paspar; volatile u8 *gpio_pehlpar; - + gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056); gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058); *gpio_paspar |= 0x0f00; @@ -1667,7 +1667,7 @@ static void __inline__ fec_request_intrs(struct net_device *dev) /* Setup interrupt handlers. */ for (idp = id; idp->name; idp++) { if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0) - printk("FEC: Could not allocate %s IRQ(%d)!\n", + printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); } @@ -1856,10 +1856,10 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */ else immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ - + /* Set MII speed to 2.5 MHz */ - fecp->fec_mii_speed = fep->phy_speed = + fecp->fec_mii_speed = fep->phy_speed = ((bd->bi_busfreq * 1000000) / 2500000) & 0x7e; } @@ -1869,7 +1869,7 @@ static void __inline__ fec_enable_phy_intr(void) fecp = fep->hwp; - /* Enable MII command finished interrupt + /* Enable MII command finished interrupt */ fecp->fec_ivec = (FEC_INTERRUPT/2) << 29; } @@ -1971,7 +1971,7 @@ static void mii_display_config(struct net_device *dev) if (status & PHY_CONF_LOOP) printk(", loopback enabled"); - + printk(".\n"); fep->sequence_done = 1; @@ -1993,7 +1993,7 @@ static void mii_relink(struct net_device *dev) if (fep->link) { duplex = 0; - if (fep->phy_status + if (fep->phy_status & (PHY_STAT_100FDX | PHY_STAT_10FDX)) duplex = 1; fec_restart(dev, duplex); @@ -2070,7 +2070,7 @@ mii_discover_phy3(uint mii_reg, struct net_device *dev) printk(" -- %s\n", phy_info[i]->name); else printk(" -- unknown PHY!\n"); - + fep->phy = phy_info[i]; fep->phy_id_done = 1; } @@ -2090,7 +2090,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) if (fep->phy_addr < 32) { if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) { - + /* Got first part of ID, now get remainder. */ fep->phy_id = phytype << 16; @@ -2243,7 +2243,7 @@ static void set_multicast_list(struct net_device *dev) */ ep->fec_hash_table_high = 0; ep->fec_hash_table_low = 0; - + dmi = dev->mc_list; for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) @@ -2252,7 +2252,7 @@ static void set_multicast_list(struct net_device *dev) */ if (!(dmi->dmi_addr[0] & 1)) continue; - + /* calculate crc32 value of mac address */ crc = 0xffffffff; @@ -2271,7 +2271,7 @@ static void set_multicast_list(struct net_device *dev) which point to specific bit in he hash registers */ hash = (crc >> (32 - HASH_BITS)) & 0x3f; - + if (hash > 31) ep->fec_hash_table_high |= 1 << (hash - 32); else |