Merge tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
     evaluation to learn device characteristics (Andy Shevchenko)

   - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
     definition (Ilpo Järvinen)

   - Simplify config access error checking in various drivers (Ilpo
     Järvinen)

   - Use pcie_capability_clear_word() (not
     pcie_capability_clear_and_set_word()) when only clearing (Ilpo
     Järvinen)

   - Add pci_get_base_class() to simplify finding devices using base
     class only (ignoring subclass and programming interface) (Sui
     Jingfeng)

   - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
     devices from before the Class Code was added to PCI (Sui Jingfeng)

   - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
     include ancient VGA devices (Sui Jingfeng)

  Resource management:

   - Make pci_assign_unassigned_resources() non-init because sparc uses
     it after init (Randy Dunlap)

  Driver binding:

   - Retain .remove() and .probe() callbacks (previously __init) because
     sysfs may cause them to be called later (Uwe Kleine-König)

   - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
     it can be claimed by dwc3 instead (Vicki Pfau)

  PCI device hotplug:

   - Add Ampere Altra Attention Indicator extension driver for acpiphp
     (D Scott Phillips)

  Power management:

   - Quirk VideoPropulsion Torrent QN16e with longer delay after reset
     (Lukas Wunner)

   - Prevent users from overriding drivers that say we shouldn't use
     D3cold (Lukas Wunner)

   - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
     because wakeup interrupts from those states don't work if amd-pmc
     has put the platform in a hardware sleep state (Mario Limonciello)

  IOMMU:

   - Disable ATS for Intel IPU E2000 devices with invalidation message
     endianness erratum (Bartosz Pawlowski)

  Error handling:

   - Factor out interrupt enable/disable into helpers (Kai-Heng Feng)

  Peer-to-peer DMA:

   - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
     ever use pagemaps with multiple entries (Gustavo A. R. Silva)

  ASPM:

   - Revert a change that broke when drivers disabled L1 and users later
     enabled an L1.x substate via sysfs, and fix a similar issue when
     users disabled L1 via sysfs (Heiner Kallweit)

  Endpoint framework:

   - Fix double free in __pci_epc_create() (Dan Carpenter)

   - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)

  Cadence PCIe controller driver:

   - Drop unused "is_rc" member (Li Chen)

  Freescale Layerscape PCIe controller driver:

   - Enable 64-bit addressing in endpoint mode (Guanhua Gao)

  Intel VMD host bridge driver:

   - Fix multi-function header check (Ilpo Järvinen)

  Microsoft Hyper-V host bridge driver:

   - Annotate struct hv_dr_state with __counted_by (Kees Cook)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
     already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
     Shimoda)

  Qualcomm PCIe controller driver:

   - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
     (Manivannan Sadhasivam)

   - Add a .write_dbi2() callback so DBI2 register writes, e.g., for
     setting the BAR size, work correctly (Manivannan Sadhasivam)

   - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
     doesn't enable ASPM states that haven't been enabled by the
     firmware (Manivannan Sadhasivam)

  Renesas R-Car Gen4 PCIe controller driver:

   - Add DesignWare core support (set max link width, EDMA_UNROLL flag,
     .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
     (Yoshihiro Shimoda)

   - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
     controller in both host and endpoint mode (Yoshihiro Shimoda)

  Xilinx NWL PCIe controller driver:

   - Update ECAM size to support 256 buses (Thippeswamy Havalige)

   - Stop setting bridge primary/secondary/subordinate bus numbers,
     since PCI core does this (Thippeswamy Havalige)

  Xilinx XDMA controller driver:

   - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
     Xilinx XDMA Soft IP (Thippeswamy Havalige)

  Miscellaneous:

   - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
     macros (Ilpo Järvinen, Bjorn Helgaas)

   - Remove logic_outb(), _outw(), outl() duplicate declarations (John
     Sanpe)

   - Replace unnecessary UTF-8 in Kconfig help text because menuconfig
     doesn't render it correctly (Liu Song)"

* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
  PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
  PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
  PCI: endpoint: Fix double free in __pci_epc_create()
  PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
  dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
  PCI: xilinx-cpm: Move IRQ definitions to a common header
  PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
  PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
  dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
  PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
  PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
  PCI/AER: Factor out interrupt toggling into helpers
  PCI: acpiphp: Allow built-in drivers for Attention Indicators
  PCI/portdrv: Use FIELD_GET()
  PCI/VC: Use FIELD_GET()
  PCI/PTM: Use FIELD_GET()
  PCI/PME: Use FIELD_GET()
  PCI/ATS: Use FIELD_GET()
  PCI/ATS: Show PASID Capability register width in bitmasks
  PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
  ...

1 files changed, 127 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/acpiphp_ampere_altra.c b/drivers/pci/hotplug/acpiphp_ampere_altra.c
new file mode 100644
index 000000000000..3fddd04851b6
--- /dev/null
+++ b/drivers/pci/hotplug/acpiphp_ampere_altra.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI PCI Hot Plug Extension for Ampere Altra. Allows control of
+ * attention LEDs via requests to system firmware.
+ *
+ * Copyright (C) 2023 Ampere Computing LLC
+ */
+
+#define pr_fmt(fmt) "acpiphp_ampere_altra: " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_hotplug.h>
+#include <linux/platform_device.h>
+
+#include "acpiphp.h"
+
+#define HANDLE_OPEN	0xb0200000
+#define HANDLE_CLOSE	0xb0300000
+#define REQUEST		0xf0700000
+#define LED_CMD		0x00000004
+#define LED_ATTENTION	0x00000002
+#define LED_SET_ON	0x00000001
+#define LED_SET_OFF	0x00000002
+#define LED_SET_BLINK	0x00000003
+
+static u32 led_service_id[4];
+
+static int led_status(u8 status)
+{
+	switch (status) {
+	case 1: return LED_SET_ON;
+	case 2: return LED_SET_BLINK;
+	default: return LED_SET_OFF;
+	}
+}
+
+static int set_attention_status(struct hotplug_slot *slot, u8 status)
+{
+	struct arm_smccc_res res;
+	struct pci_bus *bus;
+	struct pci_dev *root_port;
+	unsigned long flags;
+	u32 handle;
+	int ret = 0;
+
+	bus = slot->pci_slot->bus;
+	root_port = pcie_find_root_port(bus->self);
+	if (!root_port)
+		return -ENODEV;
+
+	local_irq_save(flags);
+	arm_smccc_smc(HANDLE_OPEN, led_service_id[0], led_service_id[1],
+		      led_service_id[2], led_service_id[3], 0, 0, 0, &res);
+	if (res.a0) {
+		ret = -ENODEV;
+		goto out;
+	}
+	handle = res.a1 & 0xffff0000;
+
+	arm_smccc_smc(REQUEST, LED_CMD, led_status(status), LED_ATTENTION,
+		 (PCI_SLOT(root_port->devfn) << 4) | (pci_domain_nr(bus) & 0xf),
+		 0, 0, handle, &res);
+	if (res.a0)
+		ret = -ENODEV;
+
+	arm_smccc_smc(HANDLE_CLOSE, handle, 0, 0, 0, 0, 0, 0, &res);
+
+ out:
+	local_irq_restore(flags);
+	return ret;
+}
+
+static int get_attention_status(struct hotplug_slot *slot, u8 *status)
+{
+	return -EINVAL;
+}
+
+static struct acpiphp_attention_info ampere_altra_attn = {
+	.set_attn = set_attention_status,
+	.get_attn = get_attention_status,
+	.owner = THIS_MODULE,
+};
+
+static int altra_led_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *fwnode = dev_fwnode(&pdev->dev);
+	int ret;
+
+	ret = fwnode_property_read_u32_array(fwnode, "uuid", led_service_id, 4);
+	if (ret) {
+		dev_err(&pdev->dev, "can't find uuid\n");
+		return ret;
+	}
+
+	ret = acpiphp_register_attention(&ampere_altra_attn);
+	if (ret) {
+		dev_err(&pdev->dev, "can't register driver\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void altra_led_remove(struct platform_device *pdev)
+{
+	acpiphp_unregister_attention(&ampere_altra_attn);
+}
+
+static const struct acpi_device_id altra_led_ids[] = {
+	{ "AMPC0008", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, altra_led_ids);
+
+static struct platform_driver altra_led_driver = {
+	.driver = {
+		.name = "ampere-altra-leds",
+		.acpi_match_table = altra_led_ids,
+	},
+	.probe = altra_led_probe,
+	.remove_new = altra_led_remove,
+};
+module_platform_driver(altra_led_driver);
+
+MODULE_AUTHOR("D Scott Phillips <scott@os.amperecomputing.com>");
+MODULE_LICENSE("GPL");