pinctrl: aspeed: Read and write bits in LPC and GFX controllers

The System Control Unit IP block in the Aspeed SoCs is typically where
the pinmux configuration is found, but not always. A number of pins
depend on state in one of LPC Host Control (LHC) or SoC Display
Controller (GFX) IP blocks, so the Aspeed pinmux drivers should have the
means to adjust these as necessary.

We use syscon to cast a regmap over the GFX and LPC blocks, which is
used as an arbitration layer between the relevant driver and the pinctrl
subsystem. The regmaps are then exposed to the SoC-specific pinctrl
drivers by phandles in the devicetree, and are selected during a mux
request by querying a new 'ip' member in struct aspeed_sig_desc.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 39 insertions, 9 deletions

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
index 87b46390b695..c5c9a1b6fa1c 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -26,8 +27,8 @@
 
 #define ASPEED_G5_NR_PINS 228
 
-#define COND1		{ SCU90, BIT(6), 0, 0 }
-#define COND2		{ SCU94, GENMASK(1, 0), 0, 0 }
+#define COND1		{ ASPEED_IP_SCU, SCU90, BIT(6), 0, 0 }
+#define COND2		{ ASPEED_IP_SCU, SCU94, GENMASK(1, 0), 0, 0 }
 
 #define B14 0
 SSSF_PIN_DECL(B14, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0));
@@ -186,9 +187,12 @@ MS_PIN_DECL(C20, GPIOE1, NDCD3, GPIE0OUT);
 
 FUNC_GROUP_DECL(GPIE0, B20, C20);
 
-#define SPI1_DESC		{ HW_STRAP1, GENMASK(13, 12), 1, 0 }
-#define SPI1DEBUG_DESC		{ HW_STRAP1, GENMASK(13, 12), 2, 0 }
-#define SPI1PASSTHRU_DESC	{ HW_STRAP1, GENMASK(13, 12), 3, 0 }
+#define SPI1_DESC \
+	{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 1, 0 }
+#define SPI1DEBUG_DESC \
+	{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 2, 0 }
+#define SPI1PASSTHRU_DESC \
+	{ ASPEED_IP_SCU, HW_STRAP1, GENMASK(13, 12), 3, 0 }
 
 #define C18 64
 SIG_EXPR_DECL(SYSCS, SPI1DEBUG, COND1, SPI1DEBUG_DESC);
@@ -325,10 +329,11 @@ SS_PIN_DECL(R1, GPIOK7, SDA8);
 
 FUNC_GROUP_DECL(I2C8, P2, R1);
 
-#define VPIOFF0_DESC    { SCU90, GENMASK(5, 4), 0, 0 }
-#define VPIOFF1_DESC    { SCU90, GENMASK(5, 4), 1, 0 }
-#define VPI24_DESC      { SCU90, GENMASK(5, 4), 2, 0 }
-#define VPIRSVD_DESC    { SCU90, GENMASK(5, 4), 3, 0 }
+#define VPIOFF0_DESC    { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 0, 0 }
+#define VPIOFF1_DESC    { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 1, 0 }
+#define VPI24_DESC      { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 2, 0 }
+#define VPIRSVD_DESC    { ASPEED_IP_SCU, SCU90, GENMASK(5, 4), 3, 0 }
+
 
 #define V2 104
 #define V2_DESC         SIG_DESC_SET(SCU88, 0)
@@ -848,10 +853,35 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = {
 static int aspeed_g5_pinctrl_probe(struct platform_device *pdev)
 {
 	int i;
+	struct regmap *map;
+	struct device_node *node;
 
 	for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++)
 		aspeed_g5_pins[i].number = i;
 
+	node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0);
+	map = syscon_node_to_regmap(node);
+	of_node_put(node);
+	if (IS_ERR(map)) {
+		dev_warn(&pdev->dev, "No GFX phandle found, some mux configurations may fail\n");
+		map = NULL;
+	}
+	aspeed_g5_pinctrl_data.maps[ASPEED_IP_GFX] = map;
+
+	node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1);
+	if (node) {
+		map = syscon_node_to_regmap(node->parent);
+		if (IS_ERR(map)) {
+			dev_warn(&pdev->dev, "LHC parent is not a syscon, some mux configurations may fail\n");
+			map = NULL;
+		}
+	} else {
+		dev_warn(&pdev->dev, "No LHC phandle found, some mux configurations may fail\n");
+		map = NULL;
+	}
+	of_node_put(node);
+	aspeed_g5_pinctrl_data.maps[ASPEED_IP_LPC] = map;
+
 	return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc,
 			&aspeed_g5_pinctrl_data);
 }