diff options
author | 2013-02-19 12:42:50 +0000 | |
---|---|---|
committer | 2013-02-19 12:42:50 +0000 | |
commit | c99f21c2763f2071dc09eb4cb26cff866e19a1c5 (patch) | |
tree | 0812b7fbd318778aa8206a53cef86cf780e2e545 /drivers/regulator | |
parent | Merge remote-tracking branch 'regulator/topic/max8998' into regulator-next (diff) | |
parent | regulator: mc13892: sanity check num_regulators parsed vs. registered (diff) | |
download | linux-c99f21c2763f2071dc09eb4cb26cff866e19a1c5.tar.gz linux-c99f21c2763f2071dc09eb4cb26cff866e19a1c5.tar.bz2 linux-c99f21c2763f2071dc09eb4cb26cff866e19a1c5.zip |
Merge remote-tracking branch 'regulator/topic/mc13892' into regulator-next
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/mc13892-regulator.c | 111 | ||||
-rw-r--r-- | drivers/regulator/mc13xxx-regulator-core.c | 10 | ||||
-rw-r--r-- | drivers/regulator/mc13xxx.h | 4 |
3 files changed, 103 insertions, 22 deletions
diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 0d84b1f33199..9891aec47b57 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -164,6 +164,14 @@ static const unsigned int mc13892_sw1[] = { 1350000, 1375000 }; +/* + * Note: this table is used to derive SWxVSEL by index into + * the array. Offset the values by the index of 1100000uV + * to get the actual register value for that voltage selector + * if the HI bit is to be set as well. + */ +#define MC13892_SWxHI_SEL_OFFSET 20 + static const unsigned int mc13892_sw[] = { 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, @@ -239,7 +247,6 @@ static const unsigned int mc13892_pwgtdrv[] = { }; static struct regulator_ops mc13892_gpo_regulator_ops; -/* sw regulators need special care due to the "hi bit" */ static struct regulator_ops mc13892_sw_regulator_ops; @@ -396,7 +403,7 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - unsigned int val; + unsigned int val, selector; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -407,12 +414,28 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) if (ret) return ret; - val = (val & mc13892_regulators[id].vsel_mask) - >> mc13892_regulators[id].vsel_shift; + /* + * Figure out if the HI bit is set inside the switcher mode register + * since this means the selector value we return is at a different + * offset into the selector table. + * + * According to the MC13892 documentation note 59 (Table 47) the SW1 + * buck switcher does not support output range programming therefore + * the HI bit must always remain 0. So do not do anything strange if + * our register is MC13892_SWITCHERS0. + */ + + selector = val & mc13892_regulators[id].vsel_mask; + + if ((mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) && + (val & MC13892_SWITCHERS0_SWxHI)) { + selector += MC13892_SWxHI_SEL_OFFSET; + } - dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); + dev_dbg(rdev_get_dev(rdev), "%s id: %d val: 0x%08x selector: %d\n", + __func__, id, val, selector); - return val; + return selector; } static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, @@ -425,18 +448,35 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, volt = rdev->desc->volt_table[selector]; mask = mc13892_regulators[id].vsel_mask; - reg_value = selector << mc13892_regulators[id].vsel_shift; - - if (volt > 1375000) { - mask |= MC13892_SWITCHERS0_SWxHI; - reg_value |= MC13892_SWITCHERS0_SWxHI; - } else if (volt < 1100000) { - mask |= MC13892_SWITCHERS0_SWxHI; - reg_value &= ~MC13892_SWITCHERS0_SWxHI; + reg_value = selector; + + /* + * Don't mess with the HI bit or support HI voltage offsets for SW1. + * + * Since the get_voltage_sel callback has given a fudged value for + * the selector offset, we need to back out that offset if HI is + * to be set so we write the correct value to the register. + * + * The HI bit addition and selector offset handling COULD be more + * complicated by shifting and masking off the voltage selector part + * of the register then logical OR it back in, but since the selector + * is at bits 4:0 there is very little point. This makes the whole + * thing more readable and we do far less work. + */ + + if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) { + if (volt > 1375000) { + reg_value -= MC13892_SWxHI_SEL_OFFSET; + reg_value |= MC13892_SWITCHERS0_SWxHI; + mask |= MC13892_SWITCHERS0_SWxHI; + } else if (volt < 1100000) { + reg_value &= ~MC13892_SWITCHERS0_SWxHI; + mask |= MC13892_SWITCHERS0_SWxHI; + } } mc13xxx_lock(priv->mc13xxx); - ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask, + ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask, reg_value); mc13xxx_unlock(priv->mc13xxx); @@ -495,15 +535,18 @@ static int mc13892_regulator_probe(struct platform_device *pdev) struct mc13xxx_regulator_init_data *mc13xxx_data; struct regulator_config config = { }; int i, ret; - int num_regulators = 0; + int num_regulators = 0, num_parsed; u32 val; num_regulators = mc13xxx_get_num_regulators_dt(pdev); + if (num_regulators <= 0 && pdata) num_regulators = pdata->num_regulators; if (num_regulators <= 0) return -EINVAL; + num_parsed = num_regulators; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + num_regulators * sizeof(priv->regulators[0]), GFP_KERNEL); @@ -520,7 +563,7 @@ static int mc13892_regulator_probe(struct platform_device *pdev) if (ret) goto err_unlock; - /* enable switch auto mode */ + /* enable switch auto mode (on 2.0A silicon only) */ if ((val & 0x0000FFFF) == 0x45d0) { ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4, MC13892_SWITCHERS4_SW1MODE_M | @@ -546,7 +589,39 @@ static int mc13892_regulator_probe(struct platform_device *pdev) = mc13892_vcam_get_mode; mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators, - ARRAY_SIZE(mc13892_regulators)); + ARRAY_SIZE(mc13892_regulators), + &num_parsed); + + /* + * Perform a little sanity check on the regulator tree - if we found + * a number of regulators from mc13xxx_get_num_regulators_dt and + * then parsed a smaller number in mc13xxx_parse_regulators_dt then + * there is a regulator defined in the regulators node which has + * not matched any usable regulator in the driver. In this case, + * there is one missing and what will happen is the first regulator + * will get registered again. + * + * Fix this by basically making our number of registerable regulators + * equal to the number of regulators we parsed. We are allocating + * too much memory for priv, but this is unavoidable at this point. + * + * As an example of how this can happen, try making a typo in your + * regulators node (vviohi {} instead of viohi {}) so that the name + * does not match.. + * + * The check will basically pass for platform data (non-DT) because + * mc13xxx_parse_regulators_dt for !CONFIG_OF will not touch num_parsed. + * + */ + if (num_parsed != num_regulators) { + dev_warn(&pdev->dev, + "parsed %d != regulators %d - check your device tree!\n", + num_parsed, num_regulators); + + num_regulators = num_parsed; + priv->num_regulators = num_regulators; + } + for (i = 0; i < num_regulators; i++) { struct regulator_init_data *init_data; struct regulator_desc *desc; diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index 4ed89c654110..2ecf1d8b6a94 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -181,12 +181,14 @@ EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt); struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators) + int num_regulators, int *num_parsed) { struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev); struct mc13xxx_regulator_init_data *data, *p; struct device_node *parent, *child; - int i; + int i, parsed = 0; + + *num_parsed = 0; of_node_get(pdev->dev.parent->of_node); parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators"); @@ -203,16 +205,20 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( for (i = 0; i < num_regulators; i++) { if (!of_node_cmp(child->name, regulators[i].desc.name)) { + p->id = i; p->init_data = of_get_regulator_init_data( &pdev->dev, child); p->node = child; p++; + + parsed++; break; } } } + *num_parsed = parsed; return data; } EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt); diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h index 06c8903f182a..007f83387fd6 100644 --- a/drivers/regulator/mc13xxx.h +++ b/drivers/regulator/mc13xxx.h @@ -39,7 +39,7 @@ extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev); extern struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators); + int num_regulators, int *num_parsed); #else static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) { @@ -48,7 +48,7 @@ static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators) + int num_regulators, int *num_parsed) { return NULL; } |