diff options
author | 2019-10-25 18:12:47 +0200 | |
---|---|---|
committer | 2019-10-28 22:16:15 -0400 | |
commit | 6028f7c4cd87cac13481255d7e35dd2c9207ecae (patch) | |
tree | 2d27607019029e3bbac319c3bcc8dbdbf94766fe /drivers/s390/scsi/zfcp_aux.c | |
parent | scsi: zfcp: support retrieval of SFP Data via Exchange Port Data (diff) | |
download | linux-6028f7c4cd87cac13481255d7e35dd2c9207ecae.tar.gz linux-6028f7c4cd87cac13481255d7e35dd2c9207ecae.tar.bz2 linux-6028f7c4cd87cac13481255d7e35dd2c9207ecae.zip |
scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver
This adds an interface to read the diagnostics of the local SFP transceiver
of an FCP-Channel from userspace. This comes in the form of new sysfs
entries that are attached to the CCW device representing the FCP
device. Each type of data gets its own sysfs entry; the whole collection of
entries is pooled into a new child-directory of the CCW device node:
"diagnostics".
Adds sysfs entries for:
* sfp_invalid: boolean value evaluating to whether the following 5
fields are invalid; {0, 1}; 1 - invalid
* temperature: transceiver temp.; unit 1/256°C;
range [-128°C, +128°C]
* vcc: supply voltage; unit 100μV; range [0, 6.55V]
* tx_bias: transmitter laser bias current; unit 2μA;
range [0, 131mA]
* tx_power: coupled TX output power; unit 0.1μW; range [0, 6.5mW]
* rx_power: received optical power; unit 0.1μW; range [0, 6.5mW]
* optical_port: boolean value evaluating to whether the FCP-Channel has
an optical port; {0, 1}; 1 - optical
* fec_active: boolean value evaluating to whether 16G FEC is active;
{0, 1}; 1 - active
* port_tx_type: nibble describing the port type; {0, 1, 2, 3};
0 - unknown, 1 - short wave,
2 - long wave LC 1310nm, 3 - long wave LL 1550nm
* connector_type: two bits describing the connector type; {0, 1};
0 - unknown, 1 - SFP+
This is only supported if the FCP-Channel in turn supports reporting the
SFP Diagnostic Data, otherwise read() on these new entries will return
EOPNOTSUPP (this affects only adapters older than FICON Express8S, on
Mainframe generations older than z14). Other possible errors for read()
include ENOLINK, ENODEV and ENOMEM.
With this patch the userspace-interface will only read data stored in
the corresponding "diagnostic buffer" (that was stored during completion
of an previous Exchange Port Data command). Implicit updating will
follow later in this series.
Link: https://lore.kernel.org/r/1f9cce7c829c881e7d71a3f10c5b57f3dd84ab32.1572018132.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/s390/scsi/zfcp_aux.c')
-rw-r--r-- | drivers/s390/scsi/zfcp_aux.c | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index a19189d7b3f3..09ec846fe01d 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -407,6 +407,9 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device) &zfcp_sysfs_adapter_attrs)) goto failed; + if (zfcp_diag_sysfs_setup(adapter)) + goto failed; + /* report size limit per scatter-gather segment */ adapter->ccw_device->dev.dma_parms = &adapter->dma_parms; @@ -431,6 +434,7 @@ void zfcp_adapter_unregister(struct zfcp_adapter *adapter) zfcp_fc_wka_ports_force_offline(adapter->gs); zfcp_scsi_adapter_unregister(adapter); + zfcp_diag_sysfs_destroy(adapter); sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs); zfcp_erp_thread_kill(adapter); |