diff options
author | 2020-07-01 21:44:14 +0530 | |
---|---|---|
committer | 2020-07-21 10:40:08 +0200 | |
commit | af0e5f1f47d8b7139ee446bc2367f74e4f034202 (patch) | |
tree | d1bdf5287e401b81a57c3bdf47cab54fa73be694 /drivers/thermal | |
parent | thermal: core: remove redundant initialization of variable ret (diff) | |
download | linux-af0e5f1f47d8b7139ee446bc2367f74e4f034202.tar.gz linux-af0e5f1f47d8b7139ee446bc2367f74e4f034202.tar.bz2 linux-af0e5f1f47d8b7139ee446bc2367f74e4f034202.zip |
thermal/drivers/clock_cooling: Remove clock_cooling code
clock_cooling has no in-kernel users. It has never found any use in
drivers as far as I can tell.
Remove the code.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/aa5d5ac2589cf7b14ece882130731b4a916849a6.1593619943.git.amit.kucheria@linaro.org
Diffstat (limited to 'drivers/thermal')
-rw-r--r-- | drivers/thermal/Kconfig | 10 | ||||
-rw-r--r-- | drivers/thermal/Makefile | 3 | ||||
-rw-r--r-- | drivers/thermal/clock_cooling.c | 445 |
3 files changed, 0 insertions, 458 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 07983bef8d6a..13991d68c844 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -190,16 +190,6 @@ config CPU_IDLE_THERMAL idle cycle. endif -config CLOCK_THERMAL - bool "Generic clock cooling support" - depends on COMMON_CLK - depends on PM_OPP - help - This entry implements the generic clock cooling mechanism through - frequency clipping. Typically used to cool off co-processors. The - device that is configured to use this cooling mechanism will be - controlled to reduce clock frequency whenever temperature is high. - config DEVFREQ_THERMAL bool "Generic device cooling support" depends on PM_DEVFREQ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 589f6fb0d381..b8d96d26f9ec 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -25,9 +25,6 @@ thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += gov_power_allocator.o thermal_sys-$(CONFIG_CPU_FREQ_THERMAL) += cpufreq_cooling.o thermal_sys-$(CONFIG_CPU_IDLE_THERMAL) += cpuidle_cooling.o -# clock cooling -thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o - # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c deleted file mode 100644 index 56cb1f46a428..000000000000 --- a/drivers/thermal/clock_cooling.c +++ /dev/null @@ -1,445 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/thermal/clock_cooling.c - * - * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com> - * - * Copyright (C) 2013 Texas Instruments Inc. - * Contact: Eduardo Valentin <eduardo.valentin@ti.com> - * - * Highly based on cpufreq_cooling.c. - * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) - * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> - */ -#include <linux/clk.h> -#include <linux/clock_cooling.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/export.h> -#include <linux/idr.h> -#include <linux/mutex.h> -#include <linux/pm_opp.h> -#include <linux/slab.h> -#include <linux/thermal.h> - -/** - * struct clock_cooling_device - data for cooling device with clock - * @id: unique integer value corresponding to each clock_cooling_device - * registered. - * @dev: struct device pointer to the device being used to cool off using - * clock frequencies. - * @cdev: thermal_cooling_device pointer to keep track of the - * registered cooling device. - * @clk_rate_change_nb: reference to notifier block used to receive clock - * rate changes. - * @freq_table: frequency table used to keep track of available frequencies. - * @clock_state: integer value representing the current state of clock - * cooling devices. - * @clock_val: integer value representing the absolute value of the clipped - * frequency. - * @clk: struct clk reference used to enforce clock limits. - * @lock: mutex lock to protect this struct. - * - * This structure is required for keeping information of each - * clock_cooling_device registered. In order to prevent corruption of this a - * mutex @lock is used. - */ -struct clock_cooling_device { - int id; - struct device *dev; - struct thermal_cooling_device *cdev; - struct notifier_block clk_rate_change_nb; - struct cpufreq_frequency_table *freq_table; - unsigned long clock_state; - unsigned long clock_val; - struct clk *clk; - struct mutex lock; /* lock to protect the content of this struct */ -}; -#define to_clock_cooling_device(x) \ - container_of(x, struct clock_cooling_device, clk_rate_change_nb) -static DEFINE_IDA(clock_ida); - -/* Below code defines functions to be used for clock as cooling device */ - -enum clock_cooling_property { - GET_LEVEL, - GET_FREQ, - GET_MAXL, -}; - -/** - * clock_cooling_get_property - fetch a property of interest for a give cpu. - * @ccdev: clock cooling device reference - * @input: query parameter - * @output: query return - * @property: type of query (frequency, level, max level) - * - * This is the common function to - * 1. get maximum clock cooling states - * 2. translate frequency to cooling state - * 3. translate cooling state to frequency - * Note that the code may be not in good shape - * but it is written in this way in order to: - * a) reduce duplicate code as most of the code can be shared. - * b) make sure the logic is consistent when translating between - * cooling states and frequencies. - * - * Return: 0 on success, -EINVAL when invalid parameters are passed. - */ -static int clock_cooling_get_property(struct clock_cooling_device *ccdev, - unsigned long input, - unsigned long *output, - enum clock_cooling_property property) -{ - int i; - unsigned long max_level = 0, level = 0; - unsigned int freq = CPUFREQ_ENTRY_INVALID; - int descend = -1; - struct cpufreq_frequency_table *pos, *table = ccdev->freq_table; - - if (!output) - return -EINVAL; - - if (!table) - return -EINVAL; - - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; - - /* get the frequency order */ - if (freq != CPUFREQ_ENTRY_INVALID && descend == -1) - descend = freq > pos->frequency; - - freq = pos->frequency; - max_level++; - } - - /* No valid cpu frequency entry */ - if (max_level == 0) - return -EINVAL; - - /* max_level is an index, not a counter */ - max_level--; - - /* get max level */ - if (property == GET_MAXL) { - *output = max_level; - return 0; - } - - if (property == GET_FREQ) - level = descend ? input : (max_level - input); - - i = 0; - cpufreq_for_each_valid_entry(pos, table) { - /* ignore duplicate entry */ - if (freq == pos->frequency) - continue; - - /* now we have a valid frequency entry */ - freq = pos->frequency; - - if (property == GET_LEVEL && (unsigned int)input == freq) { - /* get level by frequency */ - *output = descend ? i : (max_level - i); - return 0; - } - if (property == GET_FREQ && level == i) { - /* get frequency by level */ - *output = freq; - return 0; - } - i++; - } - - return -EINVAL; -} - -/** - * clock_cooling_get_level - return the cooling level of given clock cooling. - * @cdev: reference of a thermal cooling device of used as clock cooling device - * @freq: the frequency of interest - * - * This function will match the cooling level corresponding to the - * requested @freq and return it. - * - * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID - * otherwise. - */ -unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev, - unsigned long freq) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - unsigned long val; - - if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val, - GET_LEVEL)) - return THERMAL_CSTATE_INVALID; - - return val; -} -EXPORT_SYMBOL_GPL(clock_cooling_get_level); - -/** - * clock_cooling_get_frequency - get the absolute value of frequency from level. - * @ccdev: clock cooling device reference - * @level: cooling level - * - * This function matches cooling level with frequency. Based on a cooling level - * of frequency, equals cooling state of cpu cooling device, it will return - * the corresponding frequency. - * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc - * - * Return: 0 on error, the corresponding frequency otherwise. - */ -static unsigned long -clock_cooling_get_frequency(struct clock_cooling_device *ccdev, - unsigned long level) -{ - int ret = 0; - unsigned long freq; - - ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ); - if (ret) - return 0; - - return freq; -} - -/** - * clock_cooling_apply - function to apply frequency clipping. - * @ccdev: clock_cooling_device pointer containing frequency clipping data. - * @cooling_state: value of the cooling state. - * - * Function used to make sure the clock layer is aware of current thermal - * limits. The limits are applied by updating the clock rate in case it is - * higher than the corresponding frequency based on the requested cooling_state. - * - * Return: 0 on success, an error code otherwise (-EINVAL in case wrong - * cooling state). - */ -static int clock_cooling_apply(struct clock_cooling_device *ccdev, - unsigned long cooling_state) -{ - unsigned long clip_freq, cur_freq; - int ret = 0; - - /* Here we write the clipping */ - /* Check if the old cooling action is same as new cooling action */ - if (ccdev->clock_state == cooling_state) - return 0; - - clip_freq = clock_cooling_get_frequency(ccdev, cooling_state); - if (!clip_freq) - return -EINVAL; - - cur_freq = clk_get_rate(ccdev->clk); - - mutex_lock(&ccdev->lock); - ccdev->clock_state = cooling_state; - ccdev->clock_val = clip_freq; - /* enforce clock level */ - if (cur_freq > clip_freq) - ret = clk_set_rate(ccdev->clk, clip_freq); - mutex_unlock(&ccdev->lock); - - return ret; -} - -/** - * clock_cooling_clock_notifier - notifier callback on clock rate changes. - * @nb: struct notifier_block * with callback info. - * @event: value showing clock event for which this function invoked. - * @data: callback-specific data - * - * Callback to hijack the notification on clock transition. - * Every time there is a clock change, we intercept all pre change events - * and block the transition in case the new rate infringes thermal limits. - * - * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit). - */ -static int clock_cooling_clock_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct clk_notifier_data *ndata = data; - struct clock_cooling_device *ccdev = to_clock_cooling_device(nb); - - switch (event) { - case PRE_RATE_CHANGE: - /* - * checks on current state - * TODO: current method is not best we can find as it - * allows possibly voltage transitions, in case DVFS - * layer is also hijacking clock pre notifications. - */ - if (ndata->new_rate > ccdev->clock_val) - return NOTIFY_BAD; - /* fall through */ - case POST_RATE_CHANGE: - case ABORT_RATE_CHANGE: - default: - return NOTIFY_DONE; - } -} - -/* clock cooling device thermal callback functions are defined below */ - -/** - * clock_cooling_get_max_state - callback function to get the max cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the max cooling state. - * - * Callback for the thermal cooling device to return the clock - * max cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - unsigned long count = 0; - int ret; - - ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL); - if (!ret) - *state = count; - - return ret; -} - -/** - * clock_cooling_get_cur_state - function to get the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: fill this variable with the current cooling state. - * - * Callback for the thermal cooling device to return the clock - * current cooling state. - * - * Return: 0 (success) - */ -static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev, - unsigned long *state) -{ - struct clock_cooling_device *ccdev = cdev->devdata; - - *state = ccdev->clock_state; - - return 0; -} - -/** - * clock_cooling_set_cur_state - function to set the current cooling state. - * @cdev: thermal cooling device pointer. - * @state: set this variable to the current cooling state. - * - * Callback for the thermal cooling device to change the clock cooling - * current cooling state. - * - * Return: 0 on success, an error code otherwise. - */ -static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev, - unsigned long state) -{ - struct clock_cooling_device *clock_device = cdev->devdata; - - return clock_cooling_apply(clock_device, state); -} - -/* Bind clock callbacks to thermal cooling device ops */ -static struct thermal_cooling_device_ops const clock_cooling_ops = { - .get_max_state = clock_cooling_get_max_state, - .get_cur_state = clock_cooling_get_cur_state, - .set_cur_state = clock_cooling_set_cur_state, -}; - -/** - * clock_cooling_register - function to create clock cooling device. - * @dev: struct device pointer to the device used as clock cooling device. - * @clock_name: string containing the clock used as cooling mechanism. - * - * This interface function registers the clock cooling device with the name - * "thermal-clock-%x". The cooling device is based on clock frequencies. - * The struct device is assumed to be capable of DVFS transitions. - * The OPP layer is used to fetch and fill the available frequencies for - * the referred device. The ordered frequency table is used to control - * the clock cooling device cooling states and to limit clock transitions - * based on the cooling state requested by the thermal framework. - * - * Return: a valid struct thermal_cooling_device pointer on success, - * on failure, it returns a corresponding ERR_PTR(). - */ -struct thermal_cooling_device * -clock_cooling_register(struct device *dev, const char *clock_name) -{ - struct thermal_cooling_device *cdev; - struct clock_cooling_device *ccdev = NULL; - char dev_name[THERMAL_NAME_LENGTH]; - int ret = 0; - - ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL); - if (!ccdev) - return ERR_PTR(-ENOMEM); - - mutex_init(&ccdev->lock); - ccdev->dev = dev; - ccdev->clk = devm_clk_get(dev, clock_name); - if (IS_ERR(ccdev->clk)) - return ERR_CAST(ccdev->clk); - - ret = ida_simple_get(&clock_ida, 0, 0, GFP_KERNEL); - if (ret < 0) - return ERR_PTR(ret); - ccdev->id = ret; - - snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id); - - cdev = thermal_cooling_device_register(dev_name, ccdev, - &clock_cooling_ops); - if (IS_ERR(cdev)) { - ida_simple_remove(&clock_ida, ccdev->id); - return ERR_PTR(-EINVAL); - } - ccdev->cdev = cdev; - ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier; - - /* Assuming someone has already filled the opp table for this device */ - ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table); - if (ret) { - ida_simple_remove(&clock_ida, ccdev->id); - return ERR_PTR(ret); - } - ccdev->clock_state = 0; - ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0); - - clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb); - - return cdev; -} -EXPORT_SYMBOL_GPL(clock_cooling_register); - -/** - * clock_cooling_unregister - function to remove clock cooling device. - * @cdev: thermal cooling device pointer. - * - * This interface function unregisters the "thermal-clock-%x" cooling device. - */ -void clock_cooling_unregister(struct thermal_cooling_device *cdev) -{ - struct clock_cooling_device *ccdev; - - if (!cdev) - return; - - ccdev = cdev->devdata; - - clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb); - dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table); - - thermal_cooling_device_unregister(ccdev->cdev); - ida_simple_remove(&clock_ida, ccdev->id); -} -EXPORT_SYMBOL_GPL(clock_cooling_unregister); |