diff options
author | 2022-01-17 08:07:57 +0200 | |
---|---|---|
committer | 2022-01-17 08:07:57 +0200 | |
commit | 2225acc32275085d5e0ce5845c6fd18d61204b49 (patch) | |
tree | 1c79bb286a91bdaedb4e61c2cb3ce09f01e3da24 /drivers/watchdog | |
parent | Merge branch 'for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlaw... (diff) | |
parent | watchdog: msc313e: Check if the WDT was running at boot (diff) | |
download | linux-2225acc32275085d5e0ce5845c6fd18d61204b49.tar.gz linux-2225acc32275085d5e0ce5845c6fd18d61204b49.tar.bz2 linux-2225acc32275085d5e0ce5845c6fd18d61204b49.zip |
Merge tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- New device support:
- Watchdog Timer driver for RZ/G2L
- Realtek Otto watchdog timer
- Apple SoC watchdog driver
- Fintek F81966
- Remove BCM63XX_WDT after support for this SoC was added to
BCM7038_WDT
- Improvements of the BCM7038_WDT and s3c2410_wdt code
- Several other fixes and improvements
* tag 'linux-watchdog-5.17-rc1' of git://www.linux-watchdog.org/linux-watchdog: (38 commits)
watchdog: msc313e: Check if the WDT was running at boot
watchdog: Add Apple SoC watchdog driver
dt-bindings: watchdog: Add SM6350 and SM8250 compatible
watchdog: s3c2410: Fix getting the optional clock
watchdog: s3c2410: Use platform_get_irq() to get the interrupt
dt-bindings: watchdog: atmel: Add missing 'interrupts' property
watchdog: mtk_wdt: use platform_get_irq_optional
watchdog: Add Watchdog Timer driver for RZ/G2L
dt-bindings: watchdog: renesas,wdt: Add support for RZ/G2L
watchdog: da9063: Add hard dependency on I2C
watchdog: Add Realtek Otto watchdog timer
dt-bindings: watchdog: Realtek Otto WDT binding
watchdog: s3c2410: Add Exynos850 support
watchdog: da9063: use atomic safe i2c transfer in reset handler
watchdog: davinci: Use div64_ul instead of do_div
watchdog: Remove BCM63XX_WDT
MIPS: BCM63XX: Provide platform data to watchdog device
watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
watchdog: Allow building BCM7038_WDT for BCM63XX
watchdog: bcm7038_wdt: Support platform data configuration
...
Diffstat (limited to 'drivers/watchdog')
-rw-r--r-- | drivers/watchdog/Kconfig | 98 | ||||
-rw-r--r-- | drivers/watchdog/Makefile | 4 | ||||
-rw-r--r-- | drivers/watchdog/apple_wdt.c | 226 | ||||
-rw-r--r-- | drivers/watchdog/bcm63xx_wdt.c | 317 | ||||
-rw-r--r-- | drivers/watchdog/bcm7038_wdt.c | 15 | ||||
-rw-r--r-- | drivers/watchdog/da9063_wdt.c | 12 | ||||
-rw-r--r-- | drivers/watchdog/davinci_wdt.c | 2 | ||||
-rw-r--r-- | drivers/watchdog/f71808e_wdt.c | 10 | ||||
-rw-r--r-- | drivers/watchdog/meson_gxbb_wdt.c | 1 | ||||
-rw-r--r-- | drivers/watchdog/msc313e_wdt.c | 4 | ||||
-rw-r--r-- | drivers/watchdog/mtk_wdt.c | 2 | ||||
-rw-r--r-- | drivers/watchdog/realtek_otto_wdt.c | 384 | ||||
-rw-r--r-- | drivers/watchdog/rzg2l_wdt.c | 263 | ||||
-rw-r--r-- | drivers/watchdog/s3c2410_wdt.c | 338 |
14 files changed, 1228 insertions, 448 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1dc86eb1361a..c8fa79da23b3 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -207,6 +207,7 @@ config DA9055_WATCHDOG config DA9063_WATCHDOG tristate "Dialog DA9063 Watchdog" depends on MFD_DA9063 || COMPILE_TEST + depends on I2C select WATCHDOG_CORE help Support for the watchdog in the DA9063 PMIC. @@ -680,10 +681,10 @@ config MAX77620_WATCHDOG depends on MFD_MAX77620 || COMPILE_TEST select WATCHDOG_CORE help - This is the driver for the Max77620 watchdog timer. - Say 'Y' here to enable the watchdog timer support for - MAX77620 chips. To compile this driver as a module, - choose M here: the module will be called max77620_wdt. + This is the driver for the Max77620 watchdog timer. + Say 'Y' here to enable the watchdog timer support for + MAX77620 chips. To compile this driver as a module, + choose M here: the module will be called max77620_wdt. config IMX2_WDT tristate "IMX2+ Watchdog" @@ -822,6 +823,7 @@ config MESON_WATCHDOG config MEDIATEK_WATCHDOG tristate "Mediatek SoCs watchdog support" depends on ARCH_MEDIATEK || COMPILE_TEST + default ARCH_MEDIATEK select WATCHDOG_CORE select RESET_CONTROLLER help @@ -881,6 +883,14 @@ config RENESAS_RZAWDT This driver adds watchdog support for the integrated watchdogs in the Renesas RZ/A SoCs. These watchdogs can be used to reset a system. +config RENESAS_RZG2LWDT + tristate "Renesas RZ/G2L WDT Watchdog" + depends on ARCH_RENESAS || COMPILE_TEST + select WATCHDOG_CORE + help + This driver adds watchdog support for the integrated watchdogs in the + Renesas RZ/G2L SoCs. These watchdogs can be used to reset a system. + config ASPEED_WATCHDOG tristate "Aspeed BMC watchdog support" depends on ARCH_ASPEED || COMPILE_TEST @@ -940,6 +950,19 @@ config RTD119X_WATCHDOG Say Y here to include support for the watchdog timer in Realtek RTD1295 SoCs. +config REALTEK_OTTO_WDT + tristate "Realtek Otto MIPS watchdog support" + depends on MACH_REALTEK_RTL || COMPILE_TEST + depends on COMMON_CLK + select WATCHDOG_CORE + default MACH_REALTEK_RTL + help + Say Y here to include support for the watchdog timer on Realtek + RTL838x, RTL839x, RTL930x SoCs. This watchdog has pretimeout + notifications and system reset on timeout. + + When built as a module this will be called realtek_otto_wdt. + config SPRD_WATCHDOG tristate "Spreadtrum watchdog support" depends on ARCH_SPRD || COMPILE_TEST @@ -976,6 +999,18 @@ config MSC313E_WATCHDOG To compile this driver as a module, choose M here: the module will be called msc313e_wdt. +config APPLE_WATCHDOG + tristate "Apple SoC watchdog" + depends on ARCH_APPLE || COMPILE_TEST + select WATCHDOG_CORE + help + Say Y here to include support for the Watchdog found in Apple + SoCs such as the M1. Next to the common watchdog features this + driver is also required in order to reboot these SoCs. + + To compile this driver as a module, choose M here: the + module will be called apple_wdt. + # X86 (i386 + ia64 + x86_64) Architecture config ACQUIRE_WDT @@ -1440,26 +1475,26 @@ config TQMX86_WDT depends on X86 select WATCHDOG_CORE help - This is the driver for the hardware watchdog timer in the TQMX86 IO - controller found on some of their ComExpress Modules. + This is the driver for the hardware watchdog timer in the TQMX86 IO + controller found on some of their ComExpress Modules. - To compile this driver as a module, choose M here; the module - will be called tqmx86_wdt. + To compile this driver as a module, choose M here; the module + will be called tqmx86_wdt. - Most people will say N. + Most people will say N. config VIA_WDT tristate "VIA Watchdog Timer" depends on X86 && PCI select WATCHDOG_CORE help - This is the driver for the hardware watchdog timer on VIA - southbridge chipset CX700, VX800/VX820 or VX855/VX875. + This is the driver for the hardware watchdog timer on VIA + southbridge chipset CX700, VX800/VX820 or VX855/VX875. - To compile this driver as a module, choose M here; the module - will be called via_wdt. + To compile this driver as a module, choose M here; the module + will be called via_wdt. - Most people will say N. + Most people will say N. config W83627HF_WDT tristate "Watchdog timer for W83627HF/W83627DHG and compatibles" @@ -1707,16 +1742,6 @@ config OCTEON_WDT from the first interrupt, it is then only poked when the device is written. -config BCM63XX_WDT - tristate "Broadcom BCM63xx hardware watchdog" - depends on BCM63XX - help - Watchdog driver for the built in watchdog hardware in Broadcom - BCM63xx SoC. - - To compile this driver as a loadable module, choose M here. - The module will be called bcm63xx_wdt. - config BCM2835_WDT tristate "Broadcom BCM2835 hardware watchdog" depends on ARCH_BCM2835 || (OF && COMPILE_TEST) @@ -1751,15 +1776,16 @@ config BCM_KONA_WDT_DEBUG If in doubt, say 'N'. config BCM7038_WDT - tristate "BCM7038 Watchdog" + tristate "BCM63xx/BCM7038 Watchdog" select WATCHDOG_CORE depends on HAS_IOMEM - depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + depends on ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST help - Watchdog driver for the built-in hardware in Broadcom 7038 and - later SoCs used in set-top boxes. BCM7038 was made public - during the 2004 CES, and since then, many Broadcom chips use this - watchdog block, including some cable modem chips. + Watchdog driver for the built-in hardware in Broadcom 7038 and + later SoCs used in set-top boxes. BCM7038 was made public + during the 2004 CES, and since then, many Broadcom chips use this + watchdog block, including some cable modem chips and DSL (63xx) + chips. config IMGPDC_WDT tristate "Imagination Technologies PDC Watchdog Timer" @@ -2120,12 +2146,12 @@ config KEEMBAY_WATCHDOG depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) select WATCHDOG_CORE help - This option enable support for an In-secure watchdog timer driver for - Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every - count unit. An interrupt will be triggered, when the count crosses - the threshold configured in the register. + This option enable support for an In-secure watchdog timer driver for + Intel Keem Bay SoC. This WDT has a 32 bit timer and decrements in every + count unit. An interrupt will be triggered, when the count crosses + the threshold configured in the register. - To compile this driver as a module, choose M here: the - module will be called keembay_wdt. + To compile this driver as a module, choose M here: the + module will be called keembay_wdt. endif # WATCHDOG diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 31b931846e32..f7da867e8782 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o +obj-$(CONFIG_RENESAS_RZG2LWDT) += rzg2l_wdt.o obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o @@ -93,6 +94,7 @@ obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o +obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o # X86 (i386 + ia64 + x86_64) Architecture obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o @@ -154,7 +156,6 @@ obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o # MIPS Architecture obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o -obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o obj-$(CONFIG_INDYDOG) += indydog.o obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o @@ -171,6 +172,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o +obj-$(CONFIG_REALTEK_OTTO_WDT) += realtek_otto_wdt.o # PARISC Architecture diff --git a/drivers/watchdog/apple_wdt.c b/drivers/watchdog/apple_wdt.c new file mode 100644 index 000000000000..16aca21f13d6 --- /dev/null +++ b/drivers/watchdog/apple_wdt.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Apple SoC Watchdog driver + * + * Copyright (C) The Asahi Linux Contributors + */ + +#include <linux/bits.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/limits.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/watchdog.h> + +/* + * Apple Watchdog MMIO registers + * + * This HW block has three separate watchdogs. WD0 resets the machine + * to recovery mode and is not very useful for us. WD1 and WD2 trigger a normal + * machine reset. WD0 additionally supports a configurable interrupt. + * This information can be used to implement pretimeout support at a later time. + * + * APPLE_WDT_WDx_CUR_TIME is a simple counter incremented for each tick of the + * reference clock. It can also be overwritten to any value. + * Whenever APPLE_WDT_CTRL_RESET_EN is set in APPLE_WDT_WDx_CTRL and + * APPLE_WDT_WDx_CUR_TIME >= APPLE_WDT_WDx_BITE_TIME the entire machine is + * reset. + * Whenever APPLE_WDT_CTRL_IRQ_EN is set and APPLE_WDTx_WD1_CUR_TIME >= + * APPLE_WDTx_WD1_BARK_TIME an interrupt is triggered and + * APPLE_WDT_CTRL_IRQ_STATUS is set. The interrupt can be cleared by writing + * 1 to APPLE_WDT_CTRL_IRQ_STATUS. + */ +#define APPLE_WDT_WD0_CUR_TIME 0x00 +#define APPLE_WDT_WD0_BITE_TIME 0x04 +#define APPLE_WDT_WD0_BARK_TIME 0x08 +#define APPLE_WDT_WD0_CTRL 0x0c + +#define APPLE_WDT_WD1_CUR_TIME 0x10 +#define APPLE_WDT_WD1_BITE_TIME 0x14 +#define APPLE_WDT_WD1_CTRL 0x1c + +#define APPLE_WDT_WD2_CUR_TIME 0x20 +#define APPLE_WDT_WD2_BITE_TIME 0x24 +#define APPLE_WDT_WD2_CTRL 0x2c + +#define APPLE_WDT_CTRL_IRQ_EN BIT(0) +#define APPLE_WDT_CTRL_IRQ_STATUS BIT(1) +#define APPLE_WDT_CTRL_RESET_EN BIT(2) + +#define APPLE_WDT_TIMEOUT_DEFAULT 30 + +struct apple_wdt { + struct watchdog_device wdd; + void __iomem *regs; + unsigned long clk_rate; +}; + +static struct apple_wdt *to_apple_wdt(struct watchdog_device *wdd) +{ + return container_of(wdd, struct apple_wdt, wdd); +} + +static int apple_wdt_start(struct watchdog_device *wdd) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME); + writel_relaxed(APPLE_WDT_CTRL_RESET_EN, wdt->regs + APPLE_WDT_WD1_CTRL); + + return 0; +} + +static int apple_wdt_stop(struct watchdog_device *wdd) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CTRL); + + return 0; +} + +static int apple_wdt_ping(struct watchdog_device *wdd) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME); + + return 0; +} + +static int apple_wdt_set_timeout(struct watchdog_device *wdd, unsigned int s) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME); + writel_relaxed(wdt->clk_rate * s, wdt->regs + APPLE_WDT_WD1_BITE_TIME); + + wdd->timeout = s; + + return 0; +} + +static unsigned int apple_wdt_get_timeleft(struct watchdog_device *wdd) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + u32 cur_time, reset_time; + + cur_time = readl_relaxed(wdt->regs + APPLE_WDT_WD1_CUR_TIME); + reset_time = readl_relaxed(wdt->regs + APPLE_WDT_WD1_BITE_TIME); + + return (reset_time - cur_time) / wdt->clk_rate; +} + +static int apple_wdt_restart(struct watchdog_device *wdd, unsigned long mode, + void *cmd) +{ + struct apple_wdt *wdt = to_apple_wdt(wdd); + + writel_relaxed(APPLE_WDT_CTRL_RESET_EN, wdt->regs + APPLE_WDT_WD1_CTRL); + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_BITE_TIME); + writel_relaxed(0, wdt->regs + APPLE_WDT_WD1_CUR_TIME); + + /* + * Flush writes and then wait for the SoC to reset. Even though the + * reset is queued almost immediately experiments have shown that it + * can take up to ~20-25ms until the SoC is actually reset. Just wait + * 50ms here to be safe. + */ + (void)readl_relaxed(wdt->regs + APPLE_WDT_WD1_CUR_TIME); + mdelay(50); + + return 0; +} + +static void apple_wdt_clk_disable_unprepare(void *data) +{ + clk_disable_unprepare(data); +} + +static struct watchdog_ops apple_wdt_ops = { + .owner = THIS_MODULE, + .start = apple_wdt_start, + .stop = apple_wdt_stop, + .ping = apple_wdt_ping, + .set_timeout = apple_wdt_set_timeout, + .get_timeleft = apple_wdt_get_timeleft, + .restart = apple_wdt_restart, +}; + +static struct watchdog_info apple_wdt_info = { + .identity = "Apple SoC Watchdog", + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, +}; + +static int apple_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct apple_wdt *wdt; + struct clk *clk; + u32 wdt_ctrl; + int ret; + + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(wdt->regs)) + return PTR_ERR(wdt->regs); + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_prepare_enable(clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, apple_wdt_clk_disable_unprepare, + clk); + if (ret) + return ret; + + wdt->clk_rate = clk_get_rate(clk); + if (!wdt->clk_rate) + return -EINVAL; + + wdt->wdd.ops = &apple_wdt_ops; + wdt->wdd.info = &apple_wdt_info; + wdt->wdd.max_timeout = U32_MAX / wdt->clk_rate; + wdt->wdd.timeout = APPLE_WDT_TIMEOUT_DEFAULT; + + wdt_ctrl = readl_relaxed(wdt->regs + APPLE_WDT_WD1_CTRL); + if (wdt_ctrl & APPLE_WDT_CTRL_RESET_EN) + set_bit(WDOG_HW_RUNNING, &wdt->wdd.status); + + watchdog_init_timeout(&wdt->wdd, 0, dev); + apple_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout); + watchdog_stop_on_unregister(&wdt->wdd); + watchdog_set_restart_priority(&wdt->wdd, 128); + + return devm_watchdog_register_device(dev, &wdt->wdd); +} + +static const struct of_device_id apple_wdt_of_match[] = { + { .compatible = "apple,wdt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, apple_wdt_of_match); + +static struct platform_driver apple_wdt_driver = { + .driver = { + .name = "apple-watchdog", + .of_match_table = apple_wdt_of_match, + }, + .probe = apple_wdt_probe, +}; +module_platform_driver(apple_wdt_driver); + +MODULE_DESCRIPTION("Apple SoC watchdog driver"); +MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>"); +MODULE_LICENSE("Dual MIT/GPL"); diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c deleted file mode 100644 index 56cc262571a5..000000000000 --- a/drivers/watchdog/bcm63xx_wdt.c +++ /dev/null @@ -1,317 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Broadcom BCM63xx SoC watchdog driver - * - * Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com> - * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> - * - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/bitops.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/miscdevice.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/types.h> -#include <linux/uaccess.h> -#include <linux/watchdog.h> -#include <linux/timer.h> -#include <linux/jiffies.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/resource.h> -#include <linux/platform_device.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_timer.h> - -#define PFX KBUILD_MODNAME - -#define WDT_HZ 50000000 /* Fclk */ -#define WDT_DEFAULT_TIME 30 /* seconds */ -#define WDT_MAX_TIME 256 /* seconds */ - -static struct { - void __iomem *regs; - struct timer_list timer; - unsigned long inuse; - atomic_t ticks; -} bcm63xx_wdt_device; - -static int expect_close; - -static int wdt_time = WDT_DEFAULT_TIME; -static bool nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, bool, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - -/* HW functions */ -static void bcm63xx_wdt_hw_start(void) -{ - bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -} - -static void bcm63xx_wdt_hw_stop(void) -{ - bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -} - -static void bcm63xx_wdt_isr(void *data) -{ - struct pt_regs *regs = get_irq_regs(); - - die(PFX " fire", regs); -} - -static void bcm63xx_timer_tick(struct timer_list *unused) -{ - if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) { - bcm63xx_wdt_hw_start(); - mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ); - } else - pr_crit("watchdog will restart system\n"); -} - -static void bcm63xx_wdt_pet(void) -{ - atomic_set(&bcm63xx_wdt_device.ticks, wdt_time); -} - -static void bcm63xx_wdt_start(void) -{ - bcm63xx_wdt_pet(); - bcm63xx_timer_tick(0); -} - -static void bcm63xx_wdt_pause(void) -{ - del_timer_sync(&bcm63xx_wdt_device.timer); - bcm63xx_wdt_hw_stop(); -} - -static int bcm63xx_wdt_settimeout(int new_time) -{ - if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) - return -EINVAL; - - wdt_time = new_time; - - return 0; -} - -static int bcm63xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse)) - return -EBUSY; - - bcm63xx_wdt_start(); - return stream_open(inode, file); -} - -static int bcm63xx_wdt_release(struct inode *inode, struct file *file) -{ - if (expect_close == 42) - bcm63xx_wdt_pause(); - else { - pr_crit("Unexpected close, not stopping watchdog!\n"); - bcm63xx_wdt_start(); - } - clear_bit(0, &bcm63xx_wdt_device.inuse); - expect_close = 0; - return 0; -} - -static ssize_t bcm63xx_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (len) { - if (!nowayout) { - size_t i; - - /* In case it was set long ago */ - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 42; - } - } - bcm63xx_wdt_pet(); - } - return len; -} - -static struct watchdog_info bcm63xx_wdt_info = { - .identity = PFX, - .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, -}; - - -static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_value, retval = -EINVAL; - - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &bcm63xx_wdt_info, - sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) { - bcm63xx_wdt_pause(); - retval = 0; - } - if (new_value & WDIOS_ENABLECARD) { - bcm63xx_wdt_start(); - retval = 0; - } - - return retval; - - case WDIOC_KEEPALIVE: - bcm63xx_wdt_pet(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (bcm63xx_wdt_settimeout(new_value)) - return -EINVAL; - - bcm63xx_wdt_pet(); - - fallthrough; - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - default: - return -ENOTTY; - - } -} - -static const struct file_operations bcm63xx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = bcm63xx_wdt_write, - .unlocked_ioctl = bcm63xx_wdt_ioctl, - .compat_ioctl = compat_ptr_ioctl, - .open = bcm63xx_wdt_open, - .release = bcm63xx_wdt_release, -}; - -static struct miscdevice bcm63xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &bcm63xx_wdt_fops, -}; - - -static int bcm63xx_wdt_probe(struct platform_device *pdev) -{ - int ret; - struct resource *r; - - timer_setup(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - dev_err(&pdev->dev, "failed to get resources\n"); - return -ENODEV; - } - - bcm63xx_wdt_device.regs = devm_ioremap(&pdev->dev, r->start, - resource_size(r)); - if (!bcm63xx_wdt_device.regs) { - dev_err(&pdev->dev, "failed to remap I/O resources\n"); - return -ENXIO; - } - - ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register wdt timer isr\n"); - return ret; - } - - if (bcm63xx_wdt_settimeout(wdt_time)) { - bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME); - dev_info(&pdev->dev, - ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n", - wdt_time); - } - - ret = misc_register(&bcm63xx_wdt_miscdev); - if (ret < 0) { - dev_err(&pdev->dev, "failed to register watchdog device\n"); - goto unregister_timer; - } - - dev_info(&pdev->dev, " started, timer margin: %d sec\n", - WDT_DEFAULT_TIME); - - return 0; - -unregister_timer: - bcm63xx_timer_unregister(TIMER_WDT_ID); - return ret; -} - -static int bcm63xx_wdt_remove(struct platform_device *pdev) -{ - if (!nowayout) - bcm63xx_wdt_pause(); - - misc_deregister(&bcm63xx_wdt_miscdev); - bcm63xx_timer_unregister(TIMER_WDT_ID); - return 0; -} - -static void bcm63xx_wdt_shutdown(struct platform_device *pdev) -{ - bcm63xx_wdt_pause(); -} - -static struct platform_driver bcm63xx_wdt_driver = { - .probe = bcm63xx_wdt_probe, - .remove = bcm63xx_wdt_remove, - .shutdown = bcm63xx_wdt_shutdown, - .driver = { - .name = "bcm63xx-wdt", - } -}; - -module_platform_driver(bcm63xx_wdt_driver); - -MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); -MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:bcm63xx-wdt"); diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c index acaaa0005d5b..8656a137e9a4 100644 --- a/drivers/watchdog/bcm7038_wdt.c +++ b/drivers/watchdog/bcm7038_wdt.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/platform_data/bcm7038_wdt.h> #include <linux/pm.h> #include <linux/watchdog.h> @@ -133,8 +134,10 @@ static void bcm7038_clk_disable_unprepare(void *data) static int bcm7038_wdt_probe(struct platform_device *pdev) { + struct bcm7038_wdt_platform_data *pdata = pdev->dev.platform_data; struct device *dev = &pdev->dev; struct bcm7038_watchdog *wdt; + const char *clk_name = NULL; int err; wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); @@ -147,7 +150,10 @@ static int bcm7038_wdt_probe(struct platform_device *pdev) if (IS_ERR(wdt->base)) return PTR_ERR(wdt->base); - wdt->clk = devm_clk_get(dev, NULL); + if (pdata && pdata->clk_name) + clk_name = pdata->clk_name; + + wdt->clk = devm_clk_get(dev, clk_name); /* If unable to get clock, use default frequency */ if (!IS_ERR(wdt->clk)) { err = clk_prepare_enable(wdt->clk); @@ -217,8 +223,15 @@ static const struct of_device_id bcm7038_wdt_match[] = { }; MODULE_DEVICE_TABLE(of, bcm7038_wdt_match); +static const struct platform_device_id bcm7038_wdt_devtype[] = { + { .name = "bcm63xx-wdt" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, bcm7038_wdt_devtype); + static struct platform_driver bcm7038_wdt_driver = { .probe = bcm7038_wdt_probe, + .id_table = bcm7038_wdt_devtype, .driver = { .name = "bcm7038-wdt", .of_match_table = bcm7038_wdt_match, diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c index d79ce64e26a9..9adad1862bbd 100644 --- a/drivers/watchdog/da9063_wdt.c +++ b/drivers/watchdog/da9063_wdt.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <linux/i2c.h> #include <linux/delay.h> #include <linux/mfd/da9063/registers.h> #include <linux/mfd/da9063/core.h> @@ -169,14 +170,19 @@ static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action, void *data) { struct da9063 *da9063 = watchdog_get_drvdata(wdd); + struct i2c_client *client = to_i2c_client(da9063->dev); int ret; - ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, - DA9063_SHUTDOWN); - if (ret) + /* Don't use regmap because it is not atomic safe */ + ret = i2c_smbus_write_byte_data(client, DA9063_REG_CONTROL_F, + DA9063_SHUTDOWN); + if (ret < 0) dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n", ret); + /* wait for reset to assert... */ + mdelay(500); + return ret; } diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index e6eaba6bae5b..584a56893b81 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -134,7 +134,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd) timer_counter = ioread32(davinci_wdt->base + TIM12); timer_counter |= ((u64)ioread32(davinci_wdt->base + TIM34) << 32); - do_div(timer_counter, freq); + timer_counter = div64_ul(timer_counter, freq); return wdd->timeout - timer_counter; } diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index ee90c5f943f9..7f59c680de25 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -49,6 +49,7 @@ #define SIO_F81803_ID 0x1210 /* Chipset ID */ #define SIO_F81865_ID 0x0704 /* Chipset ID */ #define SIO_F81866_ID 0x1010 /* Chipset ID */ +#define SIO_F81966_ID 0x1502 /* F81804 chipset ID, same for f81966 */ #define F71808FG_REG_WDO_CONF 0xf0 #define F71808FG_REG_WDT_CONF 0xf5 @@ -105,7 +106,7 @@ MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" " given initial timeout. Zero (default) disables this feature."); enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, - f81803, f81865, f81866}; + f81803, f81865, f81866, f81966}; static const char * const fintek_wdt_names[] = { "f71808fg", @@ -118,6 +119,7 @@ static const char * const fintek_wdt_names[] = { "f81803", "f81865", "f81866", + "f81966" }; /* Super-I/O Function prototypes */ @@ -347,6 +349,7 @@ static int fintek_wdt_start(struct watchdog_device *wdd) break; case f81866: + case f81966: /* * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0. * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch: @@ -373,7 +376,7 @@ static int fintek_wdt_start(struct watchdog_device *wdd) superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT); superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0); - if (wd->type == f81865 || wd->type == f81866) + if (wd->type == f81865 || wd->type == f81866 || wd->type == f81966) superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF, F81865_FLAG_WDOUT_EN); else @@ -580,6 +583,9 @@ static int __init fintek_wdt_find(int sioaddr) case SIO_F81866_ID: type = f81866; break; + case SIO_F81966_ID: + type = f81966; + break; default: pr_info("Unrecognized Fintek device: %04x\n", (unsigned int)devid); diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c index 945f5e65db57..d3c9e2f6e63b 100644 --- a/drivers/watchdog/meson_gxbb_wdt.c +++ b/drivers/watchdog/meson_gxbb_wdt.c @@ -198,7 +198,6 @@ static int meson_gxbb_wdt_probe(struct platform_device *pdev) meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout); - watchdog_stop_on_reboot(&data->wdt_dev); return devm_watchdog_register_device(dev, &data->wdt_dev); } diff --git a/drivers/watchdog/msc313e_wdt.c b/drivers/watchdog/msc313e_wdt.c index 0d497aa0fb7d..90171431fc59 100644 --- a/drivers/watchdog/msc313e_wdt.c +++ b/drivers/watchdog/msc313e_wdt.c @@ -120,6 +120,10 @@ static int msc313e_wdt_probe(struct platform_device *pdev) priv->wdev.max_timeout = U32_MAX / clk_get_rate(priv->clk); priv->wdev.timeout = MSC313E_WDT_DEFAULT_TIMEOUT; + /* If the period is non-zero the WDT is running */ + if (readw(priv->base + REG_WDT_MAX_PRD_L) | (readw(priv->base + REG_WDT_MAX_PRD_H) << 16)) + set_bit(WDOG_HW_RUNNING, &priv->wdev.status); + watchdog_set_drvdata(&priv->wdev, priv); watchdog_init_timeout(&priv->wdev, timeout, dev); diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c index 543cf38bd04e..4577a76dd464 100644 --- a/drivers/watchdog/mtk_wdt.c +++ b/drivers/watchdog/mtk_wdt.c @@ -339,7 +339,7 @@ static int mtk_wdt_probe(struct platform_device *pdev) if (IS_ERR(mtk_wdt->wdt_base)) return PTR_ERR(mtk_wdt->wdt_base); - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_optional(pdev, 0); if (irq > 0) { err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark", &mtk_wdt->wdt_dev); diff --git a/drivers/watchdog/realtek_otto_wdt.c b/drivers/watchdog/realtek_otto_wdt.c new file mode 100644 index 000000000000..60058a0c3ec4 --- /dev/null +++ b/drivers/watchdog/realtek_otto_wdt.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Realtek Otto MIPS platform watchdog + * + * Watchdog timer that will reset the system after timeout, using the selected + * reset mode. + * + * Counter scaling and timeouts: + * - Base prescale of (2 << 25), providing tick duration T_0: 168ms @ 200MHz + * - PRESCALE: logarithmic prescaler adding a factor of {1, 2, 4, 8} + * - Phase 1: Times out after (PHASE1 + 1) × PRESCALE × T_0 + * Generates an interrupt, WDT cannot be stopped after phase 1 + * - Phase 2: starts after phase 1, times out after (PHASE2 + 1) × PRESCALE × T_0 + * Resets the system according to RST_MODE + */ + +#include <linux/bits.h> +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/math.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/reboot.h> +#include <linux/watchdog.h> + +#define OTTO_WDT_REG_CNTR 0x0 +#define OTTO_WDT_CNTR_PING BIT(31) + +#define OTTO_WDT_REG_INTR 0x4 +#define OTTO_WDT_INTR_PHASE_1 BIT(31) +#define OTTO_WDT_INTR_PHASE_2 BIT(30) + +#define OTTO_WDT_REG_CTRL 0x8 +#define OTTO_WDT_CTRL_ENABLE BIT(31) +#define OTTO_WDT_CTRL_PRESCALE GENMASK(30, 29) +#define OTTO_WDT_CTRL_PHASE1 GENMASK(26, 22) +#define OTTO_WDT_CTRL_PHASE2 GENMASK(19, 15) +#define OTTO_WDT_CTRL_RST_MODE GENMASK(1, 0) +#define OTTO_WDT_MODE_SOC 0 +#define OTTO_WDT_MODE_CPU 1 +#define OTTO_WDT_MODE_SOFTWARE 2 +#define OTTO_WDT_CTRL_DEFAULT OTTO_WDT_MODE_CPU + +#define OTTO_WDT_PRESCALE_MAX 3 + +/* + * One higher than the max values contained in PHASE{1,2}, since a value of 0 + * corresponds to one tick. + */ +#define OTTO_WDT_PHASE_TICKS_MAX 32 + +/* + * The maximum reset delay is actually 2×32 ticks, but that would require large + * pretimeout values for timeouts longer than 32 ticks. Limit the maximum timeout + * to 32 + 1 to ensure small pretimeout values can be configured as expected. + */ +#define OTTO_WDT_TIMEOUT_TICKS_MAX (OTTO_WDT_PHASE_TICKS_MAX + 1) + +struct otto_wdt_ctrl { + struct watchdog_device wdev; + struct device *dev; + void __iomem *base; + unsigned int clk_rate_khz; + int irq_phase1; +}; + +static int otto_wdt_start(struct watchdog_device *wdev) +{ + struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); + u32 v; + + v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); + v |= OTTO_WDT_CTRL_ENABLE; + iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); + + return 0; +} + +static int otto_wdt_stop(struct watchdog_device *wdev) +{ + struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); + u32 v; + + v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); + v &= ~OTTO_WDT_CTRL_ENABLE; + iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); + + return 0; +} + +static int otto_wdt_ping(struct watchdog_device *wdev) +{ + struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); + + iowrite32(OTTO_WDT_CNTR_PING, ctrl->base + OTTO_WDT_REG_CNTR); + + return 0; +} + +static int otto_wdt_tick_ms(struct otto_wdt_ctrl *ctrl, int prescale) +{ + return DIV_ROUND_CLOSEST(1 << (25 + prescale), ctrl->clk_rate_khz); +} + +/* + * The timer asserts the PHASE1/PHASE2 IRQs when the number of ticks exceeds + * the value stored in those fields. This means each phase will run for at least + * one tick, so small values need to be clamped to correctly reflect the timeout. + */ +static inline unsigned int div_round_ticks(unsigned int val, unsigned int tick_duration, + unsigned int min_ticks) +{ + return max(min_ticks, DIV_ROUND_UP(val, tick_duration)); +} + +static int otto_wdt_determine_timeouts(struct watchdog_device *wdev, unsigned int timeout, + unsigned int pretimeout) +{ + struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); + unsigned int pretimeout_ms = pretimeout * 1000; + unsigned int timeout_ms = timeout * 1000; + unsigned int prescale_next = 0; + unsigned int phase1_ticks; + unsigned int phase2_ticks; + unsigned int total_ticks; + unsigned int prescale; + unsigned int tick_ms; + u32 v; + + do { + prescale = prescale_next; + if (prescale > OTTO_WDT_PRESCALE_MAX) + return -EINVAL; + + tick_ms = otto_wdt_tick_ms(ctrl, prescale); + total_ticks = div_round_ticks(timeout_ms, tick_ms, 2); + phase1_ticks = div_round_ticks(timeout_ms - pretimeout_ms, tick_ms, 1); + phase2_ticks = total_ticks - phase1_ticks; + + prescale_next++; + } while (phase1_ticks > OTTO_WDT_PHASE_TICKS_MAX + || phase2_ticks > OTTO_WDT_PHASE_TICKS_MAX); + + v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); + + v &= ~(OTTO_WDT_CTRL_PRESCALE | OTTO_WDT_CTRL_PHASE1 | OTTO_WDT_CTRL_PHASE2); + v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE1, phase1_ticks - 1); + v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE2, phase2_ticks - 1); + v |= FIELD_PREP(OTTO_WDT_CTRL_PRESCALE, prescale); + + iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); + + timeout_ms = total_ticks * tick_ms; + ctrl->wdev.timeout = timeout_ms / 1000; + + pretimeout_ms = phase2_ticks * tick_ms; + ctrl->wdev.pretimeout = pretimeout_ms / 1000; + + return 0; +} + +static int otto_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val) +{ + return otto_wdt_determine_timeouts(wdev, val, min(wdev->pretimeout, val - 1)); +} + +static int otto_wdt_set_pretimeout(struct watchdog_device *wdev, unsigned int val) +{ + return otto_wdt_determine_timeouts(wdev, wdev->timeout, val); +} + +static int otto_wdt_restart(struct watchdog_device *wdev, unsigned long reboot_mode, + void *data) +{ + struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); + u32 reset_mode; + u32 v; + + disable_irq(ctrl->irq_phase1); + + switch (reboot_mode) { + case REBOOT_SOFT: + reset_mode = OTTO_WDT_MODE_SOFTWARE; + break; + case REBOOT_WARM: + reset_mode = OTTO_WDT_MODE_CPU; + break; + default: + reset_mode = OTTO_WDT_MODE_SOC; + break; + } + + /* Configure for shortest timeout and wait for reset to occur */ + v = FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, reset_mode) | OTTO_WDT_CTRL_ENABLE; + iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); + + mdelay(3 * otto_wdt_tick_ms(ctrl, 0)); + + return 0; +} + +static irqreturn_t otto_wdt_phase1_isr(int irq, void *dev_id) +{ + struct otto_wdt_ctrl *ctrl = dev_id; + + iowrite32(OTTO_WDT_INTR_PHASE_1, ctrl->base + OTTO_WDT_REG_INTR); + dev_crit(ctrl->dev, "phase 1 timeout\n"); + watchdog_notify_pretimeout(&ctrl->wdev); + + return IRQ_HANDLED; +} + +static const struct watchdog_ops otto_wdt_ops = { + .owner = THIS_MODULE, + .start = otto_wdt_start, + .stop = otto_wdt_stop, + .ping = otto_wdt_ping, + .set_timeout = otto_wdt_set_timeout, + .set_pretimeout = otto_wdt_set_pretimeout, + .restart = otto_wdt_restart, +}; + +static const struct watchdog_info otto_wdt_info = { + .identity = "Realtek Otto watchdog timer", + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE | + WDIOF_SETTIMEOUT | + WDIOF_PRETIMEOUT, +}; + +static void otto_wdt_clock_action(void *data) +{ + clk_disable_unprepare(data); +} + +static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl) +{ + struct clk *clk = devm_clk_get(ctrl->dev, NULL); + int ret; + + if (IS_ERR(clk)) + return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n"); + + ret = clk_prepare_enable(clk); + if (ret) + return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n"); + + ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk); + if (ret) + return ret; + + ctrl->clk_rate_khz = clk_get_rate(clk) / 1000; + if (ctrl->clk_rate_khz == 0) + return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n"); + + return 0; +} + +static int otto_wdt_probe_reset_mode(struct otto_wdt_ctrl *ctrl) +{ + static const char *mode_property = "realtek,reset-mode"; + const struct fwnode_handle *node = ctrl->dev->fwnode; + int mode_count; + u32 mode; + u32 v; + + if (!node) + return -ENXIO; + + mode_count = fwnode_property_string_array_count(node, mode_property); + if (mode_count < 0) + return mode_count; + else if (mode_count == 0) + return 0; + else if (mode_count != 1) + return -EINVAL; + + if (fwnode_property_match_string(node, mode_property, "soc") == 0) + mode = OTTO_WDT_MODE_SOC; + else if (fwnode_property_match_string(node, mode_property, "cpu") == 0) + mode = OTTO_WDT_MODE_CPU; + else if (fwnode_property_match_string(node, mode_property, "software") == 0) + mode = OTTO_WDT_MODE_SOFTWARE; + else + return -EINVAL; + + v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); + v &= ~OTTO_WDT_CTRL_RST_MODE; + v |= FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, mode); + iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); + + return 0; +} + +static int otto_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct otto_wdt_ctrl *ctrl; + unsigned int max_tick_ms; + int ret; + + ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + ctrl->dev = dev; + ctrl->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ctrl->base)) + return PTR_ERR(ctrl->base); + + /* Clear any old interrupts and reset initial state */ + iowrite32(OTTO_WDT_INTR_PHASE_1 | OTTO_WDT_INTR_PHASE_2, + ctrl->base + OTTO_WDT_REG_INTR); + iowrite32(OTTO_WDT_CTRL_DEFAULT, ctrl->base + OTTO_WDT_REG_CTRL); + + ret = otto_wdt_probe_clk(ctrl); + if (ret) + return ret; + + ctrl->irq_phase1 = platform_get_irq_byname(pdev, "phase1"); + if (ctrl->irq_phase1 < 0) + return ctrl->irq_phase1; + + ret = devm_request_irq(dev, ctrl->irq_phase1, otto_wdt_phase1_isr, 0, + "realtek-otto-wdt", ctrl); + if (ret) + return dev_err_probe(dev, ret, "Failed to get IRQ for phase1\n"); + + ret = otto_wdt_probe_reset_mode(ctrl); + if (ret) + return dev_err_probe(dev, ret, "Invalid reset mode specified\n"); + + ctrl->wdev.parent = dev; + ctrl->wdev.info = &otto_wdt_info; + ctrl->wdev.ops = &otto_wdt_ops; + + /* + * Since pretimeout cannot be disabled, min. timeout is twice the + * subsystem resolution. Max. timeout is ca. 43s at a bus clock of 200MHz. + */ + ctrl->wdev.min_timeout = 2; + max_tick_ms = otto_wdt_tick_ms(ctrl, OTTO_WDT_PRESCALE_MAX); + ctrl->wdev.max_hw_heartbeat_ms = max_tick_ms * OTTO_WDT_TIMEOUT_TICKS_MAX; + ctrl->wdev.timeout = min(30U, ctrl->wdev.max_hw_heartbeat_ms / 1000); + + watchdog_set_drvdata(&ctrl->wdev, ctrl); + watchdog_init_timeout(&ctrl->wdev, 0, dev); + watchdog_stop_on_reboot(&ctrl->wdev); + watchdog_set_restart_priority(&ctrl->wdev, 128); + + ret = otto_wdt_determine_timeouts(&ctrl->wdev, ctrl->wdev.timeout, 1); + if (ret) + return dev_err_probe(dev, ret, "Failed to set timeout\n"); + + return devm_watchdog_register_device(dev, &ctrl->wdev); +} + +static const struct of_device_id otto_wdt_ids[] = { + { .compatible = "realtek,rtl8380-wdt" }, + { .compatible = "realtek,rtl8390-wdt" }, + { .compatible = "realtek,rtl9300-wdt" }, + { } +}; +MODULE_DEVICE_TABLE(of, otto_wdt_ids); + +static struct platform_driver otto_wdt_driver = { + .probe = otto_wdt_probe, + .driver = { + .name = "realtek-otto-watchdog", + .of_match_table = otto_wdt_ids, + }, +}; +module_platform_driver(otto_wdt_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>"); +MODULE_DESCRIPTION("Realtek Otto watchdog timer driver"); diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c new file mode 100644 index 000000000000..6b426df34fd6 --- /dev/null +++ b/drivers/watchdog/rzg2l_wdt.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2L WDT Watchdog Driver + * + * Copyright (C) 2021 Renesas Electronics Corporation + */ +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/units.h> +#include <linux/watchdog.h> + +#define WDTCNT 0x00 +#define WDTSET 0x04 +#define WDTTIM 0x08 +#define WDTINT 0x0C +#define WDTCNT_WDTEN BIT(0) +#define WDTINT_INTDISP BIT(0) + +#define WDT_DEFAULT_TIMEOUT 60U + +/* Setting period time register only 12 bit set in WDTSET[31:20] */ +#define WDTSET_COUNTER_MASK (0xFFF00000) +#define WDTSET_COUNTER_VAL(f) ((f) << 20) + +#define F2CYCLE_NSEC(f) (1000000000 / (f)) + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +struct rzg2l_wdt_priv { + void __iomem *base; + struct watchdog_device wdev; + struct reset_control *rstc; + unsigned long osc_clk_rate; + unsigned long delay; +}; + +static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv) +{ + /* delay timer when change the setting register */ + ndelay(priv->delay); +} + +static u32 rzg2l_wdt_get_cycle_usec(unsigned long cycle, u32 wdttime) +{ + u64 timer_cycle_us = 1024 * 1024 * (wdttime + 1) * MICRO; + + return div64_ul(timer_cycle_us, cycle); +} + +static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val, unsigned int reg) +{ + if (reg == WDTSET) + val &= WDTSET_COUNTER_MASK; + + writel_relaxed(val, priv->base + reg); + /* Registers other than the WDTINT is always synchronized with WDT_CLK */ + if (reg != WDTINT) + rzg2l_wdt_wait_delay(priv); +} + +static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev) +{ + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + u32 time_out; + + /* Clear Lapsed Time Register and clear Interrupt */ + rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT); + /* 2 consecutive overflow cycle needed to trigger reset */ + time_out = (wdev->timeout * (MICRO / 2)) / + rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0); + rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET); +} + +static int rzg2l_wdt_start(struct watchdog_device *wdev) +{ + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + + reset_control_deassert(priv->rstc); + pm_runtime_get_sync(wdev->parent); + + /* Initialize time out */ + rzg2l_wdt_init_timeout(wdev); + + /* Initialize watchdog counter register */ + rzg2l_wdt_write(priv, 0, WDTTIM); + + /* Enable watchdog timer*/ + rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT); + + return 0; +} + +static int rzg2l_wdt_stop(struct watchdog_device *wdev) +{ + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + + pm_runtime_put(wdev->parent); + reset_control_assert(priv->rstc); + + return 0; +} + +static int rzg2l_wdt_restart(struct watchdog_device *wdev, + unsigned long action, void *data) +{ + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + + /* Reset the module before we modify any register */ + reset_control_reset(priv->rstc); + pm_runtime_get_sync(wdev->parent); + + /* smallest counter value to reboot soon */ + rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(1), WDTSET); + + /* Enable watchdog timer*/ + rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT); + + return 0; +} + +static const struct watchdog_info rzg2l_wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, + .identity = "Renesas RZ/G2L WDT Watchdog", +}; + +static int rzg2l_wdt_ping(struct watchdog_device *wdev) +{ + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + + rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT); + + return 0; +} + +static const struct watchdog_ops rzg2l_wdt_ops = { + .owner = THIS_MODULE, + .start = rzg2l_wdt_start, + .stop = rzg2l_wdt_stop, + .ping = rzg2l_wdt_ping, + .restart = rzg2l_wdt_restart, +}; + +static void rzg2l_wdt_reset_assert_pm_disable_put(void *data) +{ + struct watchdog_device *wdev = data; + struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev); + + pm_runtime_put(wdev->parent); + pm_runtime_disable(wdev->parent); + reset_control_assert(priv->rstc); +} + +static int rzg2l_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rzg2l_wdt_priv *priv; + unsigned long pclk_rate; + struct clk *wdt_clk; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + /* Get watchdog main clock */ + wdt_clk = clk_get(&pdev->dev, "oscclk"); + if (IS_ERR(wdt_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no oscclk"); + + priv->osc_clk_rate = clk_get_rate(wdt_clk); + clk_put(wdt_clk); + if (!priv->osc_clk_rate) + return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0"); + + /* Get Peripheral clock */ + wdt_clk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(wdt_clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no pclk"); + + pclk_rate = clk_get_rate(wdt_clk); + clk_put(wdt_clk); + if (!pclk_rate) + return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0"); + + priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 + F2CYCLE_NSEC(pclk_rate) * 9; + + priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(priv->rstc)) + return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc), + "failed to get cpg reset"); + + reset_control_deassert(priv->rstc); + pm_runtime_enable(&pdev->dev); + ret = pm_runtime_resume_and_get(&pdev->dev); + if (ret < 0) { + dev_err(dev, "pm_runtime_resume_and_get failed ret=%pe", ERR_PTR(ret)); + goto out_pm_get; + } + + priv->wdev.info = &rzg2l_wdt_ident; + priv->wdev.ops = &rzg2l_wdt_ops; + priv->wdev.parent = dev; + priv->wdev.min_timeout = 1; + priv->wdev.max_timeout = rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0xfff) / + USEC_PER_SEC; + priv->wdev.timeout = WDT_DEFAULT_TIMEOUT; + + watchdog_set_drvdata(&priv->wdev, priv); + ret = devm_add_action_or_reset(&pdev->dev, + rzg2l_wdt_reset_assert_pm_disable_put, + &priv->wdev); + if (ret < 0) + return ret; + + watchdog_set_nowayout(&priv->wdev, nowayout); + watchdog_stop_on_unregister(&priv->wdev); + + ret = watchdog_init_timeout(&priv->wdev, 0, dev); + if (ret) + dev_warn(dev, "Specified timeout invalid, using default"); + + return devm_watchdog_register_device(&pdev->dev, &priv->wdev); + +out_pm_get: + pm_runtime_disable(dev); + reset_control_assert(priv->rstc); + + return ret; +} + +static const struct of_device_id rzg2l_wdt_ids[] = { + { .compatible = "renesas,rzg2l-wdt", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids); + +static struct platform_driver rzg2l_wdt_driver = { + .driver = { + .name = "rzg2l_wdt", + .of_match_table = rzg2l_wdt_ids, + }, + .probe = rzg2l_wdt_probe, +}; +module_platform_driver(rzg2l_wdt_driver); + +MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver"); +MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 2395f353e52d..6db22f2e3a4f 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -56,13 +56,58 @@ #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404 #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET 0x040c -#define QUIRK_HAS_PMU_CONFIG (1 << 0) -#define QUIRK_HAS_RST_STAT (1 << 1) -#define QUIRK_HAS_WTCLRINT_REG (1 << 2) +#define EXYNOS850_CLUSTER0_NONCPU_OUT 0x1220 +#define EXYNOS850_CLUSTER0_NONCPU_INT_EN 0x1244 +#define EXYNOS850_CLUSTER1_NONCPU_OUT 0x1620 +#define EXYNOS850_CLUSTER1_NONCPU_INT_EN 0x1644 + +#define EXYNOS850_CLUSTER0_WDTRESET_BIT 24 +#define EXYNOS850_CLUSTER1_WDTRESET_BIT 23 + +/** + * DOC: Quirk flags for different Samsung watchdog IP-cores + * + * This driver supports multiple Samsung SoCs, each of which might have + * different set of registers and features supported. As watchdog block + * sometimes requires modifying PMU registers for proper functioning, register + * differences in both watchdog and PMU IP-cores should be accounted for. Quirk + * flags described below serve the purpose of telling the driver about mentioned + * SoC traits, and can be specified in driver data for each particular supported + * device. + * + * %QUIRK_HAS_WTCLRINT_REG: Watchdog block has WTCLRINT register. It's used to + * clear the interrupt once the interrupt service routine is complete. It's + * write-only, writing any values to this register clears the interrupt, but + * reading is not permitted. + * + * %QUIRK_HAS_PMU_MASK_RESET: PMU block has the register for disabling/enabling + * WDT reset request. On old SoCs it's usually called MASK_WDT_RESET_REQUEST, + * new SoCs have CLUSTERx_NONCPU_INT_EN register, which 'mask_bit' value is + * inverted compared to the former one. + * + * %QUIRK_HAS_PMU_RST_STAT: PMU block has RST_STAT (reset status) register, + * which contains bits indicating the reason for most recent CPU reset. If + * present, driver will use this register to check if previous reboot was due to + * watchdog timer reset. + * + * %QUIRK_HAS_PMU_AUTO_DISABLE: PMU block has AUTOMATIC_WDT_RESET_DISABLE + * register. If 'mask_bit' bit is set, PMU will disable WDT reset when + * corresponding processor is in reset state. + * + * %QUIRK_HAS_PMU_CNT_EN: PMU block has some register (e.g. CLUSTERx_NONCPU_OUT) + * with "watchdog counter enable" bit. That bit should be set to make watchdog + * counter running. + */ +#define QUIRK_HAS_WTCLRINT_REG (1 << 0) +#define QUIRK_HAS_PMU_MASK_RESET (1 << 1) +#define QUIRK_HAS_PMU_RST_STAT (1 << 2) +#define QUIRK_HAS_PMU_AUTO_DISABLE (1 << 3) +#define QUIRK_HAS_PMU_CNT_EN (1 << 4) /* These quirks require that we have a PMU register map */ -#define QUIRKS_HAVE_PMUREG (QUIRK_HAS_PMU_CONFIG | \ - QUIRK_HAS_RST_STAT) +#define QUIRKS_HAVE_PMUREG \ + (QUIRK_HAS_PMU_MASK_RESET | QUIRK_HAS_PMU_RST_STAT | \ + QUIRK_HAS_PMU_AUTO_DISABLE | QUIRK_HAS_PMU_CNT_EN) static bool nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin; @@ -90,26 +135,33 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to * timer reset functionality. * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog * timer reset functionality. + * @mask_reset_inv: If set, mask_reset_reg value will have inverted meaning. * @mask_bit: Bit number for the watchdog timer in the disable register and the * mask reset register. * @rst_stat_reg: Offset in pmureg for the register that has the reset status. * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog * reset. + * @cnt_en_reg: Offset in pmureg for the register that enables WDT counter. + * @cnt_en_bit: Bit number for "watchdog counter enable" in cnt_en register. * @quirks: A bitfield of quirks. */ struct s3c2410_wdt_variant { int disable_reg; int mask_reset_reg; + bool mask_reset_inv; int mask_bit; int rst_stat_reg; int rst_stat_bit; + int cnt_en_reg; + int cnt_en_bit; u32 quirks; }; struct s3c2410_wdt { struct device *dev; - struct clk *clock; + struct clk *bus_clk; /* for register interface (PCLK) */ + struct clk *src_clk; /* for WDT counter */ void __iomem *reg_base; unsigned int count; spinlock_t lock; @@ -136,8 +188,8 @@ static const struct s3c2410_wdt_variant drv_data_exynos5250 = { .mask_bit = 20, .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, .rst_stat_bit = 20, - .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ - | QUIRK_HAS_WTCLRINT_REG, + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \ + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE, }; static const struct s3c2410_wdt_variant drv_data_exynos5420 = { @@ -146,8 +198,8 @@ static const struct s3c2410_wdt_variant drv_data_exynos5420 = { .mask_bit = 0, .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, .rst_stat_bit = 9, - .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ - | QUIRK_HAS_WTCLRINT_REG, + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \ + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE, }; static const struct s3c2410_wdt_variant drv_data_exynos7 = { @@ -156,8 +208,32 @@ static const struct s3c2410_wdt_variant drv_data_exynos7 = { .mask_bit = 23, .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, .rst_stat_bit = 23, /* A57 WDTRESET */ - .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \ - | QUIRK_HAS_WTCLRINT_REG, + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \ + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_AUTO_DISABLE, +}; + +static const struct s3c2410_wdt_variant drv_data_exynos850_cl0 = { + .mask_reset_reg = EXYNOS850_CLUSTER0_NONCPU_INT_EN, + .mask_bit = 2, + .mask_reset_inv = true, + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, + .rst_stat_bit = EXYNOS850_CLUSTER0_WDTRESET_BIT, + .cnt_en_reg = EXYNOS850_CLUSTER0_NONCPU_OUT, + .cnt_en_bit = 7, + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \ + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN, +}; + +static const struct s3c2410_wdt_variant drv_data_exynos850_cl1 = { + .mask_reset_reg = EXYNOS850_CLUSTER1_NONCPU_INT_EN, + .mask_bit = 2, + .mask_reset_inv = true, + .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET, + .rst_stat_bit = EXYNOS850_CLUSTER1_WDTRESET_BIT, + .cnt_en_reg = EXYNOS850_CLUSTER1_NONCPU_OUT, + .cnt_en_bit = 7, + .quirks = QUIRK_HAS_WTCLRINT_REG | QUIRK_HAS_PMU_MASK_RESET | \ + QUIRK_HAS_PMU_RST_STAT | QUIRK_HAS_PMU_CNT_EN, }; static const struct of_device_id s3c2410_wdt_match[] = { @@ -171,6 +247,8 @@ static const struct of_device_id s3c2410_wdt_match[] = { .data = &drv_data_exynos5420 }, { .compatible = "samsung,exynos7-wdt", .data = &drv_data_exynos7 }, + { .compatible = "samsung,exynos850-wdt", + .data = &drv_data_exynos850_cl0 }, {}, }; MODULE_DEVICE_TABLE(of, s3c2410_wdt_match); @@ -187,9 +265,14 @@ MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids); /* functions */ -static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock) +static inline unsigned long s3c2410wdt_get_freq(struct s3c2410_wdt *wdt) { - unsigned long freq = clk_get_rate(clock); + return clk_get_rate(wdt->src_clk ? wdt->src_clk : wdt->bus_clk); +} + +static inline unsigned int s3c2410wdt_max_timeout(struct s3c2410_wdt *wdt) +{ + const unsigned long freq = s3c2410wdt_get_freq(wdt); return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1) / S3C2410_WTCON_MAXDIV); @@ -200,35 +283,74 @@ static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb) return container_of(nb, struct s3c2410_wdt, freq_transition); } -static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask) +static int s3c2410wdt_disable_wdt_reset(struct s3c2410_wdt *wdt, bool mask) { + const u32 mask_val = BIT(wdt->drv_data->mask_bit); + const u32 val = mask ? mask_val : 0; int ret; - u32 mask_val = 1 << wdt->drv_data->mask_bit; - u32 val = 0; - /* No need to do anything if no PMU CONFIG needed */ - if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG)) - return 0; + ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->disable_reg, + mask_val, val); + if (ret < 0) + dev_err(wdt->dev, "failed to update reg(%d)\n", ret); - if (mask) - val = mask_val; + return ret; +} + +static int s3c2410wdt_mask_wdt_reset(struct s3c2410_wdt *wdt, bool mask) +{ + const u32 mask_val = BIT(wdt->drv_data->mask_bit); + const bool val_inv = wdt->drv_data->mask_reset_inv; + const u32 val = (mask ^ val_inv) ? mask_val : 0; + int ret; - ret = regmap_update_bits(wdt->pmureg, - wdt->drv_data->disable_reg, - mask_val, val); + ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->mask_reset_reg, + mask_val, val); if (ret < 0) - goto error; + dev_err(wdt->dev, "failed to update reg(%d)\n", ret); + + return ret; +} - ret = regmap_update_bits(wdt->pmureg, - wdt->drv_data->mask_reset_reg, - mask_val, val); - error: +static int s3c2410wdt_enable_counter(struct s3c2410_wdt *wdt, bool en) +{ + const u32 mask_val = BIT(wdt->drv_data->cnt_en_bit); + const u32 val = en ? mask_val : 0; + int ret; + + ret = regmap_update_bits(wdt->pmureg, wdt->drv_data->cnt_en_reg, + mask_val, val); if (ret < 0) dev_err(wdt->dev, "failed to update reg(%d)\n", ret); return ret; } +static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en) +{ + int ret; + + if (wdt->drv_data->quirks & QUIRK_HAS_PMU_AUTO_DISABLE) { + ret = s3c2410wdt_disable_wdt_reset(wdt, !en); + if (ret < 0) + return ret; + } + + if (wdt->drv_data->quirks & QUIRK_HAS_PMU_MASK_RESET) { + ret = s3c2410wdt_mask_wdt_reset(wdt, !en); + if (ret < 0) + return ret; + } + + if (wdt->drv_data->quirks & QUIRK_HAS_PMU_CNT_EN) { + ret = s3c2410wdt_enable_counter(wdt, en); + if (ret < 0) + return ret; + } + + return 0; +} + static int s3c2410wdt_keepalive(struct watchdog_device *wdd) { struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); @@ -300,7 +422,7 @@ static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned int timeout) { struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd); - unsigned long freq = clk_get_rate(wdt->clock); + unsigned long freq = s3c2410wdt_get_freq(wdt); unsigned int count; unsigned int divisor = 1; unsigned long wtcon; @@ -482,7 +604,7 @@ static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt) unsigned int rst_stat; int ret; - if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT)) + if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_RST_STAT)) return 0; ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat); @@ -498,14 +620,40 @@ static inline const struct s3c2410_wdt_variant * s3c2410_get_wdt_drv_data(struct platform_device *pdev) { const struct s3c2410_wdt_variant *variant; + struct device *dev = &pdev->dev; - variant = of_device_get_match_data(&pdev->dev); + variant = of_device_get_match_data(dev); if (!variant) { /* Device matched by platform_device_id */ variant = (struct s3c2410_wdt_variant *) platform_get_device_id(pdev)->driver_data; } +#ifdef CONFIG_OF + /* Choose Exynos850 driver data w.r.t. cluster index */ + if (variant == &drv_data_exynos850_cl0) { + u32 index; + int err; + + err = of_property_read_u32(dev->of_node, + "samsung,cluster-index", &index); + if (err) { + dev_err(dev, "failed to get cluster index\n"); + return NULL; + } + + switch (index) { + case 0: + return &drv_data_exynos850_cl0; + case 1: + return &drv_data_exynos850_cl1; + default: + dev_err(dev, "wrong cluster index: %u\n", index); + return NULL; + } + } +#endif + return variant; } @@ -513,9 +661,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct s3c2410_wdt *wdt; - struct resource *wdt_irq; unsigned int wtcon; - int started = 0; + int wdt_irq; int ret; wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); @@ -527,6 +674,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt->wdt_device = s3c2410_wdd; wdt->drv_data = s3c2410_get_wdt_drv_data(pdev); + if (!wdt->drv_data) + return -EINVAL; + if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) { wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, "samsung,syscon-phandle"); @@ -536,40 +686,52 @@ static int s3c2410wdt_probe(struct platform_device *pdev) } } - wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (wdt_irq == NULL) { - dev_err(dev, "no irq resource specified\n"); - ret = -ENOENT; - goto err; - } + wdt_irq = platform_get_irq(pdev, 0); + if (wdt_irq < 0) + return wdt_irq; /* get the memory region for the watchdog timer */ wdt->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(wdt->reg_base)) { - ret = PTR_ERR(wdt->reg_base); - goto err; - } + if (IS_ERR(wdt->reg_base)) + return PTR_ERR(wdt->reg_base); - wdt->clock = devm_clk_get(dev, "watchdog"); - if (IS_ERR(wdt->clock)) { - dev_err(dev, "failed to find watchdog clock source\n"); - ret = PTR_ERR(wdt->clock); - goto err; + wdt->bus_clk = devm_clk_get(dev, "watchdog"); + if (IS_ERR(wdt->bus_clk)) { + dev_err(dev, "failed to find bus clock\n"); + return PTR_ERR(wdt->bus_clk); } - ret = clk_prepare_enable(wdt->clock); + ret = clk_prepare_enable(wdt->bus_clk); if (ret < 0) { - dev_err(dev, "failed to enable clock\n"); + dev_err(dev, "failed to enable bus clock\n"); return ret; } + /* + * "watchdog_src" clock is optional; if it's not present -- just skip it + * and use "watchdog" clock as both bus and source clock. + */ + wdt->src_clk = devm_clk_get_optional(dev, "watchdog_src"); + if (IS_ERR(wdt->src_clk)) { + dev_err_probe(dev, PTR_ERR(wdt->src_clk), + "failed to get source clock\n"); + ret = PTR_ERR(wdt->src_clk); + goto err_bus_clk; + } + + ret = clk_prepare_enable(wdt->src_clk); + if (ret) { + dev_err(dev, "failed to enable source clock\n"); + goto err_bus_clk; + } + wdt->wdt_device.min_timeout = 1; - wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt->clock); + wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt); ret = s3c2410wdt_cpufreq_register(wdt); if (ret < 0) { dev_err(dev, "failed to register cpufreq\n"); - goto err_clk; + goto err_src_clk; } watchdog_set_drvdata(&wdt->wdt_device, wdt); @@ -581,19 +743,19 @@ static int s3c2410wdt_probe(struct platform_device *pdev) ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, wdt->wdt_device.timeout); if (ret) { - started = s3c2410wdt_set_heartbeat(&wdt->wdt_device, - S3C2410_WATCHDOG_DEFAULT_TIME); - - if (started == 0) - dev_info(dev, - "tmr_margin value out of range, default %d used\n", + ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device, + S3C2410_WATCHDOG_DEFAULT_TIME); + if (ret == 0) { + dev_warn(dev, "tmr_margin value out of range, default %d used\n", S3C2410_WATCHDOG_DEFAULT_TIME); - else - dev_info(dev, "default timer value is out of range, cannot start\n"); + } else { + dev_err(dev, "failed to use default timeout\n"); + goto err_cpufreq; + } } - ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0, - pdev->name, pdev); + ret = devm_request_irq(dev, wdt_irq, s3c2410wdt_irq, 0, + pdev->name, pdev); if (ret != 0) { dev_err(dev, "failed to install irq (%d)\n", ret); goto err_cpufreq; @@ -605,25 +767,29 @@ static int s3c2410wdt_probe(struct platform_device *pdev) wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt); wdt->wdt_device.parent = dev; + /* + * If "tmr_atboot" param is non-zero, start the watchdog right now. Also + * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog. + * + * If we're not enabling the watchdog, then ensure it is disabled if it + * has been left running from the bootloader or other source. + */ + if (tmr_atboot) { + dev_info(dev, "starting watchdog timer\n"); + s3c2410wdt_start(&wdt->wdt_device); + set_bit(WDOG_HW_RUNNING, &wdt->wdt_device.status); + } else { + s3c2410wdt_stop(&wdt->wdt_device); + } + ret = watchdog_register_device(&wdt->wdt_device); if (ret) goto err_cpufreq; - ret = s3c2410wdt_mask_and_disable_reset(wdt, false); + ret = s3c2410wdt_enable(wdt, true); if (ret < 0) goto err_unregister; - if (tmr_atboot && started == 0) { - dev_info(dev, "starting watchdog timer\n"); - s3c2410wdt_start(&wdt->wdt_device); - } else if (!tmr_atboot) { - /* if we're not enabling the watchdog, then ensure it is - * disabled if it has been left running from the bootloader - * or other source */ - - s3c2410wdt_stop(&wdt->wdt_device); - } - platform_set_drvdata(pdev, wdt); /* print out a statement of readiness */ @@ -643,10 +809,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev) err_cpufreq: s3c2410wdt_cpufreq_deregister(wdt); - err_clk: - clk_disable_unprepare(wdt->clock); + err_src_clk: + clk_disable_unprepare(wdt->src_clk); + + err_bus_clk: + clk_disable_unprepare(wdt->bus_clk); - err: return ret; } @@ -655,7 +823,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) int ret; struct s3c2410_wdt *wdt = platform_get_drvdata(dev); - ret = s3c2410wdt_mask_and_disable_reset(wdt, true); + ret = s3c2410wdt_enable(wdt, false); if (ret < 0) return ret; @@ -663,7 +831,8 @@ static int s3c2410wdt_remove(struct platform_device *dev) s3c2410wdt_cpufreq_deregister(wdt); - clk_disable_unprepare(wdt->clock); + clk_disable_unprepare(wdt->src_clk); + clk_disable_unprepare(wdt->bus_clk); return 0; } @@ -672,8 +841,7 @@ static void s3c2410wdt_shutdown(struct platform_device *dev) { struct s3c2410_wdt *wdt = platform_get_drvdata(dev); - s3c2410wdt_mask_and_disable_reset(wdt, true); - + s3c2410wdt_enable(wdt, false); s3c2410wdt_stop(&wdt->wdt_device); } @@ -688,7 +856,7 @@ static int s3c2410wdt_suspend(struct device *dev) wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON); wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT); - ret = s3c2410wdt_mask_and_disable_reset(wdt, true); + ret = s3c2410wdt_enable(wdt, false); if (ret < 0) return ret; @@ -708,7 +876,7 @@ static int s3c2410wdt_resume(struct device *dev) writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */ writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON); - ret = s3c2410wdt_mask_and_disable_reset(wdt, false); + ret = s3c2410wdt_enable(wdt, true); if (ret < 0) return ret; |