diff options
author | 2020-08-07 13:35:51 -0700 | |
---|---|---|
committer | 2020-08-07 13:35:51 -0700 | |
commit | 30185b69a2d533c4ba6ca926b8390ce7de495e29 (patch) | |
tree | 73180ba927cfc0ce506a6c632a3ec62885cb9548 /drivers | |
parent | Merge branch 'work.fdpic' of git://git.kernel.org/pub/scm/linux/kernel/git/vi... (diff) | |
parent | Merge branch 'clk-imx' into clk-next (diff) | |
download | linux-30185b69a2d533c4ba6ca926b8390ce7de495e29.tar.gz linux-30185b69a2d533c4ba6ca926b8390ce7de495e29.tar.bz2 linux-30185b69a2d533c4ba6ca926b8390ce7de495e29.zip |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"It looks like a smaller batch of clk updates this time around.
In the core framework we just have some minor tweaks and a debugfs
feature, so not much to see there. The driver updates are fairly well
split between AT91 and Qualcomm clk support. Adding those two drivers
together equals about 50% of the diffstat.
Otherwise, the big amount of work this time was on supporting
Broadcom's Raspberry Pi firmware clks.
Highlights:
Core:
- Document clk_hw_round_rate() so it gets some more use
- Remove unused __clk_get_flags()
- Add a prepare/enable debugfs feature similar to rate setting
New Drivers:
- Add support for SAMA7G5 SoC clks
- Enable CPU clks on Qualcomm IPQ6018 SoCs
- Enable CPU clks on Qualcomm MSM8996 SoCs
- GPU clk support for Qualcomm SM8150 and SM8250 SoCs
- Audio clks on Qualcomm SC7180 SoCs
- Microchip Sparx5 DPLL clk
- Add support for the new Renesas RZ/G2H (R8A774E1) SoC
Updates:
- Make defines for bcm63xx-gate clks to use in DT
- Support BCM2711 SoC firmware clks
- Add HDMI clks for BCM2711 SoCs
- Add RTC related clks on Ingenic SoCs
- Support USB PHY clks on Ingenic SoCs
- Support gate clks on BCM6318 SoCs
- RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
- Use poll_timeout functions in Rockchip clk driver
- Support Rockchip rk3288w SoC variant
- Mark mac_lbtest critical on Rockchip rk3188
- Add CAAM clock support for i.MX vf610 driver
- Add MU root clock support for i.MX imx8mp driver
- Amlogic g12: add neural network accelerator clock sources
- Amlogic meson8: remove critical flag for main PLL divider
- Amlogic meson8: add video decoder clock gates
- Convert one more Renesas DT binding to json-schema
- Enhance critical clock handling on Renesas platforms to only
consider clocks that were enabled at boot time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
ipq806x: gcc: add support for child probe
clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
clk: qcom: ipq8074: Add correct index for PCIe clocks
clk: <linux/clk-provider.h>: drop a duplicated word
clk: renesas: cpg-mssr: Add r8a774e1 support
dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
clk: Drop duplicate selection in Kconfig
clk: qcom: smd: Add support for MSM8992/4 rpm clocks
clk: qcom: ipq8074: Add missing clocks for pcie
dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
Replace HTTP links with HTTPS ones: Common CLK framework
clk: qcom: Add CPU clock driver for msm8996
dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
soc: qcom: Separate kryo l2 accessors from PMU driver
clk: meson: meson8b: add the vclk2_en gate clock
clk: meson: meson8b: add the vclk_en gate clock
clk: qcom: Fix return value check in apss_ipq6018_probe()
clk: bcm: dvp: Add missing module informations
clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
...
Diffstat (limited to 'drivers')
53 files changed, 2820 insertions, 396 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 326f91b2dda9..690a2587e0c5 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -121,7 +121,6 @@ config COMMON_CLK_SI5351 tristate "Clock driver for SiLabs 5351A/B/C" depends on I2C select REGMAP_I2C - select RATIONAL help This driver supports Silicon Labs 5351A/B/C programmable clock generators. @@ -163,7 +162,6 @@ config COMMON_CLK_CDCE706 tristate "Clock driver for TI CDCE706 clock synthesizer" depends on I2C select REGMAP_I2C - select RATIONAL help This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index 8c83977a7dc4..784f12c72365 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -1,4 +1,15 @@ # SPDX-License-Identifier: GPL-2.0-only + +config CLK_BCM2711_DVP + tristate "Broadcom BCM2711 DVP support" + depends on ARCH_BCM2835 ||COMPILE_TEST + depends on COMMON_CLK + default ARCH_BCM2835 + select RESET_SIMPLE + help + Enable common clock framework support for the Broadcom BCM2711 + DVP Controller. + config CLK_BCM2835 bool "Broadcom BCM2835 clock support" depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 0070ddf6cdd2..edb66b44cb27 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o +obj-$(CONFIG_CLK_BCM2711_DVP) += clk-bcm2711-dvp.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835.o obj-$(CONFIG_CLK_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c new file mode 100644 index 000000000000..8333e20dc9d2 --- /dev/null +++ b/drivers/clk/bcm/clk-bcm2711-dvp.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 Cerno + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/reset/reset-simple.h> + +#define DVP_HT_RPI_SW_INIT 0x04 +#define DVP_HT_RPI_MISC_CONFIG 0x08 + +#define NR_CLOCKS 2 +#define NR_RESETS 6 + +struct clk_dvp { + struct clk_hw_onecell_data *data; + struct reset_simple_data reset; +}; + +static const struct clk_parent_data clk_dvp_parent = { + .index = 0, +}; + +static int clk_dvp_probe(struct platform_device *pdev) +{ + struct clk_hw_onecell_data *data; + struct resource *res; + struct clk_dvp *dvp; + void __iomem *base; + int ret; + + dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL); + if (!dvp) + return -ENOMEM; + platform_set_drvdata(pdev, dvp); + + dvp->data = devm_kzalloc(&pdev->dev, + struct_size(dvp->data, hws, NR_CLOCKS), + GFP_KERNEL); + if (!dvp->data) + return -ENOMEM; + data = dvp->data; + + base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(base)) + return PTR_ERR(base); + + dvp->reset.rcdev.owner = THIS_MODULE; + dvp->reset.rcdev.nr_resets = NR_RESETS; + dvp->reset.rcdev.ops = &reset_simple_ops; + dvp->reset.rcdev.of_node = pdev->dev.of_node; + dvp->reset.membase = base + DVP_HT_RPI_SW_INIT; + spin_lock_init(&dvp->reset.lock); + + ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev); + if (ret) + return ret; + + data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi0-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 3, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[0])) + return PTR_ERR(data->hws[0]); + + data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev, + "hdmi1-108MHz", + &clk_dvp_parent, 0, + base + DVP_HT_RPI_MISC_CONFIG, 4, + CLK_GATE_SET_TO_DISABLE, + &dvp->reset.lock); + if (IS_ERR(data->hws[1])) { + ret = PTR_ERR(data->hws[1]); + goto unregister_clk0; + } + + data->num = NR_CLOCKS; + ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, + data); + if (ret) + goto unregister_clk1; + + return 0; + +unregister_clk1: + clk_hw_unregister_gate(data->hws[1]); + +unregister_clk0: + clk_hw_unregister_gate(data->hws[0]); + return ret; +}; + +static int clk_dvp_remove(struct platform_device *pdev) +{ + struct clk_dvp *dvp = platform_get_drvdata(pdev); + struct clk_hw_onecell_data *data = dvp->data; + + clk_hw_unregister_gate(data->hws[1]); + clk_hw_unregister_gate(data->hws[0]); + + return 0; +} + +static const struct of_device_id clk_dvp_dt_ids[] = { + { .compatible = "brcm,brcm2711-dvp", }, + { /* sentinel */ } +}; + +static struct platform_driver clk_dvp_driver = { + .probe = clk_dvp_probe, + .remove = clk_dvp_remove, + .driver = { + .name = "brcm2711-dvp", + .of_match_table = clk_dvp_dt_ids, + }, +}; +module_platform_driver(clk_dvp_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>"); +MODULE_DESCRIPTION("BCM2711 DVP clock driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 6bb7efa12037..027eba31f793 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -421,6 +421,7 @@ struct bcm2835_pll_data { u32 reference_enable_mask; /* Bit in CM_LOCK to indicate when the PLL has locked. */ u32 lock_mask; + u32 flags; const struct bcm2835_pll_ana_bits *ana; @@ -1310,7 +1311,7 @@ static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman, init.num_parents = 1; init.name = pll_data->name; init.ops = &bcm2835_pll_clk_ops; - init.flags = CLK_IGNORE_UNUSED; + init.flags = pll_data->flags | CLK_IGNORE_UNUSED; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) @@ -1684,10 +1685,33 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* - * PLLB is used for the ARM's clock. Controlled by firmware, see - * clk-raspberrypi.c. - */ + /* PLLB is used for the ARM's clock. */ + [BCM2835_PLLB] = REGISTER_PLL( + SOC_ALL, + .name = "pllb", + .cm_ctrl_reg = CM_PLLB, + .a2w_ctrl_reg = A2W_PLLB_CTRL, + .frac_reg = A2W_PLLB_FRAC, + .ana_reg_base = A2W_PLLB_ANA0, + .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, + .lock_mask = CM_LOCK_FLOCKB, + + .ana = &bcm2835_ana_default, + + .min_rate = 600000000u, + .max_rate = 3000000000u, + .max_fb_rate = BCM2835_MAX_FB_RATE, + .flags = CLK_GET_RATE_NOCACHE), + [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( + SOC_ALL, + .name = "pllb_arm", + .source_pll = "pllb", + .cm_reg = CM_PLLB, + .a2w_reg = A2W_PLLB_ARM, + .load_mask = CM_PLLB_LOADARM, + .hold_mask = CM_PLLB_HOLDARM, + .fixed_divider = 1, + .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE), /* * PLLC is the core PLL, used to drive the core VPU clock. diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c index 98e884957db8..89297c57881e 100644 --- a/drivers/clk/bcm/clk-bcm63xx-gate.c +++ b/drivers/clk/bcm/clk-bcm63xx-gate.c @@ -6,6 +6,14 @@ #include <linux/of_device.h> #include <linux/platform_device.h> +#include <dt-bindings/clock/bcm3368-clock.h> +#include <dt-bindings/clock/bcm6318-clock.h> +#include <dt-bindings/clock/bcm6328-clock.h> +#include <dt-bindings/clock/bcm6358-clock.h> +#include <dt-bindings/clock/bcm6362-clock.h> +#include <dt-bindings/clock/bcm6368-clock.h> +#include <dt-bindings/clock/bcm63268-clock.h> + struct clk_bcm63xx_table_entry { const char * const name; u8 bit; @@ -20,126 +28,458 @@ struct clk_bcm63xx_hw { }; static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = { - { .name = "mac", .bit = 3, }, - { .name = "tc", .bit = 5, }, - { .name = "us_top", .bit = 6, }, - { .name = "ds_top", .bit = 7, }, - { .name = "acm", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbs", .bit = 10, }, - { .name = "bmu", .bit = 11, }, - { .name = "pcm", .bit = 12, }, - { .name = "ntp", .bit = 13, }, - { .name = "acp_b", .bit = 14, }, - { .name = "acp_a", .bit = 15, }, - { .name = "emusb", .bit = 17, }, - { .name = "enet0", .bit = 18, }, - { .name = "enet1", .bit = 19, }, - { .name = "usbsu", .bit = 20, }, - { .name = "ephy", .bit = 21, }, - { }, + { + .name = "mac", + .bit = BCM3368_CLK_MAC, + }, { + .name = "tc", + .bit = BCM3368_CLK_TC, + }, { + .name = "us_top", + .bit = BCM3368_CLK_US_TOP, + }, { + .name = "ds_top", + .bit = BCM3368_CLK_DS_TOP, + }, { + .name = "acm", + .bit = BCM3368_CLK_ACM, + }, { + .name = "spi", + .bit = BCM3368_CLK_SPI, + }, { + .name = "usbs", + .bit = BCM3368_CLK_USBS, + }, { + .name = "bmu", + .bit = BCM3368_CLK_BMU, + }, { + .name = "pcm", + .bit = BCM3368_CLK_PCM, + }, { + .name = "ntp", + .bit = BCM3368_CLK_NTP, + }, { + .name = "acp_b", + .bit = BCM3368_CLK_ACP_B, + }, { + .name = "acp_a", + .bit = BCM3368_CLK_ACP_A, + }, { + .name = "emusb", + .bit = BCM3368_CLK_EMUSB, + }, { + .name = "enet0", + .bit = BCM3368_CLK_ENET0, + }, { + .name = "enet1", + .bit = BCM3368_CLK_ENET1, + }, { + .name = "usbsu", + .bit = BCM3368_CLK_USBSU, + }, { + .name = "ephy", + .bit = BCM3368_CLK_EPHY, + }, { + /* sentinel */ + }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = { + { + .name = "adsl_asb", + .bit = BCM6318_CLK_ADSL_ASB, + }, { + .name = "usb_asb", + .bit = BCM6318_CLK_USB_ASB, + }, { + .name = "mips_asb", + .bit = BCM6318_CLK_MIPS_ASB, + }, { + .name = "pcie_asb", + .bit = BCM6318_CLK_PCIE_ASB, + }, { + .name = "phymips_asb", + .bit = BCM6318_CLK_PHYMIPS_ASB, + }, { + .name = "robosw_asb", + .bit = BCM6318_CLK_ROBOSW_ASB, + }, { + .name = "sar_asb", + .bit = BCM6318_CLK_SAR_ASB, + }, { + .name = "sdr_asb", + .bit = BCM6318_CLK_SDR_ASB, + }, { + .name = "swreg_asb", + .bit = BCM6318_CLK_SWREG_ASB, + }, { + .name = "periph_asb", + .bit = BCM6318_CLK_PERIPH_ASB, + }, { + .name = "cpubus160", + .bit = BCM6318_CLK_CPUBUS160, + }, { + .name = "adsl", + .bit = BCM6318_CLK_ADSL, + }, { + .name = "sar125", + .bit = BCM6318_CLK_SAR125, + }, { + .name = "mips", + .bit = BCM6318_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "pcie", + .bit = BCM6318_CLK_PCIE, + }, { + .name = "robosw250", + .bit = BCM6318_CLK_ROBOSW250, + }, { + .name = "robosw025", + .bit = BCM6318_CLK_ROBOSW025, + }, { + .name = "sdr", + .bit = BCM6318_CLK_SDR, + .flags = CLK_IS_CRITICAL, + }, { + .name = "usbd", + .bit = BCM6318_CLK_USBD, + }, { + .name = "hsspi", + .bit = BCM6318_CLK_HSSPI, + }, { + .name = "pcie25", + .bit = BCM6318_CLK_PCIE25, + }, { + .name = "phymips", + .bit = BCM6318_CLK_PHYMIPS, + }, { + .name = "afe", + .bit = BCM6318_CLK_AFE, + }, { + .name = "qproc", + .bit = BCM6318_CLK_QPROC, + }, { + /* sentinel */ + }, +}; + +static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = { + { + .name = "adsl-ubus", + .bit = BCM6318_UCLK_ADSL, + }, { + .name = "arb-ubus", + .bit = BCM6318_UCLK_ARB, + .flags = CLK_IS_CRITICAL, + }, { + .name = "mips-ubus", + .bit = BCM6318_UCLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "pcie-ubus", + .bit = BCM6318_UCLK_PCIE, + }, { + .name = "periph-ubus", + .bit = BCM6318_UCLK_PERIPH, + .flags = CLK_IS_CRITICAL, + }, { + .name = "phymips-ubus", + .bit = BCM6318_UCLK_PHYMIPS, + }, { + .name = "robosw-ubus", + .bit = BCM6318_UCLK_ROBOSW, + }, { + .name = "sar-ubus", + .bit = BCM6318_UCLK_SAR, + }, { + .name = "sdr-ubus", + .bit = BCM6318_UCLK_SDR, + }, { + .name = "usb-ubus", + .bit = BCM6318_UCLK_USB, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = { - { .name = "phy_mips", .bit = 0, }, - { .name = "adsl_qproc", .bit = 1, }, - { .name = "adsl_afe", .bit = 2, }, - { .name = "adsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "sar", .bit = 5, }, - { .name = "pcm", .bit = 6, }, - { .name = "usbd", .bit = 7, }, - { .name = "usbh", .bit = 8, }, - { .name = "hsspi", .bit = 9, }, - { .name = "pcie", .bit = 10, }, - { .name = "robosw", .bit = 11, }, - { }, + { + .name = "phy_mips", + .bit = BCM6328_CLK_PHYMIPS, + }, { + .name = "adsl_qproc", + .bit = BCM6328_CLK_ADSL_QPROC, + }, { + .name = "adsl_afe", + .bit = BCM6328_CLK_ADSL_AFE, + }, { + .name = "adsl", + .bit = BCM6328_CLK_ADSL, + }, { + .name = "mips", + .bit = BCM6328_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "sar", + .bit = BCM6328_CLK_SAR, + }, { + .name = "pcm", + .bit = BCM6328_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM6328_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM6328_CLK_USBH, + }, { + .name = "hsspi", + .bit = BCM6328_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM6328_CLK_PCIE, + }, { + .name = "robosw", + .bit = BCM6328_CLK_ROBOSW, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = { - { .name = "enet", .bit = 4, }, - { .name = "adslphy", .bit = 5, }, - { .name = "pcm", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbs", .bit = 10, }, - { .name = "sar", .bit = 11, }, - { .name = "emusb", .bit = 17, }, - { .name = "enet0", .bit = 18, }, - { .name = "enet1", .bit = 19, }, - { .name = "usbsu", .bit = 20, }, - { .name = "ephy", .bit = 21, }, - { }, + { + .name = "enet", + .bit = BCM6358_CLK_ENET, + }, { + .name = "adslphy", + .bit = BCM6358_CLK_ADSLPHY, + }, { + .name = "pcm", + .bit = BCM6358_CLK_PCM, + }, { + .name = "spi", + .bit = BCM6358_CLK_SPI, + }, { + .name = "usbs", + .bit = BCM6358_CLK_USBS, + }, { + .name = "sar", + .bit = BCM6358_CLK_SAR, + }, { + .name = "emusb", + .bit = BCM6358_CLK_EMUSB, + }, { + .name = "enet0", + .bit = BCM6358_CLK_ENET0, + }, { + .name = "enet1", + .bit = BCM6358_CLK_ENET1, + }, { + .name = "usbsu", + .bit = BCM6358_CLK_USBSU, + }, { + .name = "ephy", + .bit = BCM6358_CLK_EPHY, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = { - { .name = "adsl_qproc", .bit = 1, }, - { .name = "adsl_afe", .bit = 2, }, - { .name = "adsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "wlan_ocp", .bit = 5, }, - { .name = "swpkt_usb", .bit = 7, }, - { .name = "swpkt_sar", .bit = 8, }, - { .name = "sar", .bit = 9, }, - { .name = "robosw", .bit = 10, }, - { .name = "pcm", .bit = 11, }, - { .name = "usbd", .bit = 12, }, - { .name = "usbh", .bit = 13, }, - { .name = "ipsec", .bit = 14, }, - { .name = "spi", .bit = 15, }, - { .name = "hsspi", .bit = 16, }, - { .name = "pcie", .bit = 17, }, - { .name = "fap", .bit = 18, }, - { .name = "phymips", .bit = 19, }, - { .name = "nand", .bit = 20, }, - { }, + { + .name = "adsl_qproc", + .bit = BCM6362_CLK_ADSL_QPROC, + }, { + .name = "adsl_afe", + .bit = BCM6362_CLK_ADSL_AFE, + }, { + .name = "adsl", + .bit = BCM6362_CLK_ADSL, + }, { + .name = "mips", + .bit = BCM6362_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "wlan_ocp", + .bit = BCM6362_CLK_WLAN_OCP, + }, { + .name = "swpkt_usb", + .bit = BCM6362_CLK_SWPKT_USB, + }, { + .name = "swpkt_sar", + .bit = BCM6362_CLK_SWPKT_SAR, + }, { + .name = "sar", + .bit = BCM6362_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM6362_CLK_ROBOSW, + }, { + .name = "pcm", + .bit = BCM6362_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM6362_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM6362_CLK_USBH, + }, { + .name = "ipsec", + .bit = BCM6362_CLK_IPSEC, + }, { + .name = "spi", + .bit = BCM6362_CLK_SPI, + }, { + .name = "hsspi", + .bit = BCM6362_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM6362_CLK_PCIE, + }, { + .name = "fap", + .bit = BCM6362_CLK_FAP, + }, { + .name = "phymips", + .bit = BCM6362_CLK_PHYMIPS, + }, { + .name = "nand", + .bit = BCM6362_CLK_NAND, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = { - { .name = "vdsl_qproc", .bit = 2, }, - { .name = "vdsl_afe", .bit = 3, }, - { .name = "vdsl_bonding", .bit = 4, }, - { .name = "vdsl", .bit = 5, }, - { .name = "phymips", .bit = 6, }, - { .name = "swpkt_usb", .bit = 7, }, - { .name = "swpkt_sar", .bit = 8, }, - { .name = "spi", .bit = 9, }, - { .name = "usbd", .bit = 10, }, - { .name = "sar", .bit = 11, }, - { .name = "robosw", .bit = 12, }, - { .name = "utopia", .bit = 13, }, - { .name = "pcm", .bit = 14, }, - { .name = "usbh", .bit = 15, }, - { .name = "disable_gless", .bit = 16, }, - { .name = "nand", .bit = 17, }, - { .name = "ipsec", .bit = 18, }, - { }, + { + .name = "vdsl_qproc", + .bit = BCM6368_CLK_VDSL_QPROC, + }, { + .name = "vdsl_afe", + .bit = BCM6368_CLK_VDSL_AFE, + }, { + .name = "vdsl_bonding", + .bit = BCM6368_CLK_VDSL_BONDING, + }, { + .name = "vdsl", + .bit = BCM6368_CLK_VDSL, + }, { + .name = "phymips", + .bit = BCM6368_CLK_PHYMIPS, + }, { + .name = "swpkt_usb", + .bit = BCM6368_CLK_SWPKT_USB, + }, { + .name = "swpkt_sar", + .bit = BCM6368_CLK_SWPKT_SAR, + }, { + .name = "spi", + .bit = BCM6368_CLK_SPI, + }, { + .name = "usbd", + .bit = BCM6368_CLK_USBD, + }, { + .name = "sar", + .bit = BCM6368_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM6368_CLK_ROBOSW, + }, { + .name = "utopia", + .bit = BCM6368_CLK_UTOPIA, + }, { + .name = "pcm", + .bit = BCM6368_CLK_PCM, + }, { + .name = "usbh", + .bit = BCM6368_CLK_USBH, + }, { + .name = "disable_gless", + .bit = BCM6368_CLK_DIS_GLESS, + }, { + .name = "nand", + .bit = BCM6368_CLK_NAND, + }, { + .name = "ipsec", + .bit = BCM6368_CLK_IPSEC, + }, { + /* sentinel */ + }, }; static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = { - { .name = "disable_gless", .bit = 0, }, - { .name = "vdsl_qproc", .bit = 1, }, - { .name = "vdsl_afe", .bit = 2, }, - { .name = "vdsl", .bit = 3, }, - { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, }, - { .name = "wlan_ocp", .bit = 5, }, - { .name = "dect", .bit = 6, }, - { .name = "fap0", .bit = 7, }, - { .name = "fap1", .bit = 8, }, - { .name = "sar", .bit = 9, }, - { .name = "robosw", .bit = 10, }, - { .name = "pcm", .bit = 11, }, - { .name = "usbd", .bit = 12, }, - { .name = "usbh", .bit = 13, }, - { .name = "ipsec", .bit = 14, }, - { .name = "spi", .bit = 15, }, - { .name = "hsspi", .bit = 16, }, - { .name = "pcie", .bit = 17, }, - { .name = "phymips", .bit = 18, }, - { .name = "gmac", .bit = 19, }, - { .name = "nand", .bit = 20, }, - { .name = "tbus", .bit = 27, }, - { .name = "robosw250", .bit = 31, }, - { }, + { + .name = "disable_gless", + .bit = BCM63268_CLK_DIS_GLESS, + }, { + .name = "vdsl_qproc", + .bit = BCM63268_CLK_VDSL_QPROC, + }, { + .name = "vdsl_afe", + .bit = BCM63268_CLK_VDSL_AFE, + }, { + .name = "vdsl", + .bit = BCM63268_CLK_VDSL, + }, { + .name = "mips", + .bit = BCM63268_CLK_MIPS, + .flags = CLK_IS_CRITICAL, + }, { + .name = "wlan_ocp", + .bit = BCM63268_CLK_WLAN_OCP, + }, { + .name = "dect", + .bit = BCM63268_CLK_DECT, + }, { + .name = "fap0", + .bit = BCM63268_CLK_FAP0, + }, { + .name = "fap1", + .bit = BCM63268_CLK_FAP1, + }, { + .name = "sar", + .bit = BCM63268_CLK_SAR, + }, { + .name = "robosw", + .bit = BCM63268_CLK_ROBOSW, + }, { + .name = "pcm", + .bit = BCM63268_CLK_PCM, + }, { + .name = "usbd", + .bit = BCM63268_CLK_USBD, + }, { + .name = "usbh", + .bit = BCM63268_CLK_USBH, + }, { + .name = "ipsec", + .bit = BCM63268_CLK_IPSEC, + }, { + .name = "spi", + .bit = BCM63268_CLK_SPI, + }, { + .name = "hsspi", + .bit = BCM63268_CLK_HSSPI, + }, { + .name = "pcie", + .bit = BCM63268_CLK_PCIE, + }, { + .name = "phymips", + .bit = BCM63268_CLK_PHYMIPS, + }, { + .name = "gmac", + .bit = BCM63268_CLK_GMAC, + }, { + .name = "nand", + .bit = BCM63268_CLK_NAND, + }, { + .name = "tbus", + .bit = BCM63268_CLK_TBUS, + }, { + .name = "robosw250", + .bit = BCM63268_CLK_ROBOSW250, + }, { + /* sentinel */ + }, }; static int clk_bcm63xx_probe(struct platform_device *pdev) @@ -155,6 +495,7 @@ static int clk_bcm63xx_probe(struct platform_device *pdev) for (entry = table; entry->name; entry++) maxbit = max_t(u8, maxbit, entry->bit); + maxbit++; hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit), GFP_KERNEL); @@ -217,6 +558,8 @@ static int clk_bcm63xx_remove(struct platform_device *pdev) static const struct of_device_id clk_bcm63xx_dt_ids[] = { { .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, }, + { .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, }, + { .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, }, { .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, }, { .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, }, { .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, }, diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 1654fd0eedc9..5cc82954e1ce 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -18,30 +18,56 @@ #include <soc/bcm2835/raspberrypi-firmware.h> -#define RPI_FIRMWARE_ARM_CLK_ID 0x00000003 +enum rpi_firmware_clk_id { + RPI_FIRMWARE_EMMC_CLK_ID = 1, + RPI_FIRMWARE_UART_CLK_ID, + RPI_FIRMWARE_ARM_CLK_ID, + RPI_FIRMWARE_CORE_CLK_ID, + RPI_FIRMWARE_V3D_CLK_ID, + RPI_FIRMWARE_H264_CLK_ID, + RPI_FIRMWARE_ISP_CLK_ID, + RPI_FIRMWARE_SDRAM_CLK_ID, + RPI_FIRMWARE_PIXEL_CLK_ID, + RPI_FIRMWARE_PWM_CLK_ID, + RPI_FIRMWARE_HEVC_CLK_ID, + RPI_FIRMWARE_EMMC2_CLK_ID, + RPI_FIRMWARE_M2MC_CLK_ID, + RPI_FIRMWARE_PIXEL_BVB_CLK_ID, + RPI_FIRMWARE_NUM_CLK_ID, +}; + +static char *rpi_firmware_clk_names[] = { + [RPI_FIRMWARE_EMMC_CLK_ID] = "emmc", + [RPI_FIRMWARE_UART_CLK_ID] = "uart", + [RPI_FIRMWARE_ARM_CLK_ID] = "arm", + [RPI_FIRMWARE_CORE_CLK_ID] = "core", + [RPI_FIRMWARE_V3D_CLK_ID] = "v3d", + [RPI_FIRMWARE_H264_CLK_ID] = "h264", + [RPI_FIRMWARE_ISP_CLK_ID] = "isp", + [RPI_FIRMWARE_SDRAM_CLK_ID] = "sdram", + [RPI_FIRMWARE_PIXEL_CLK_ID] = "pixel", + [RPI_FIRMWARE_PWM_CLK_ID] = "pwm", + [RPI_FIRMWARE_HEVC_CLK_ID] = "hevc", + [RPI_FIRMWARE_EMMC2_CLK_ID] = "emmc2", + [RPI_FIRMWARE_M2MC_CLK_ID] = "m2mc", + [RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = "pixel-bvb", +}; #define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) #define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) -/* - * Even though the firmware interface alters 'pllb' the frequencies are - * provided as per 'pllb_arm'. We need to scale before passing them trough. - */ -#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2 - -#define A2W_PLL_FRAC_BITS 20 - struct raspberrypi_clk { struct device *dev; struct rpi_firmware *firmware; struct platform_device *cpufreq; +}; - unsigned long min_rate; - unsigned long max_rate; +struct raspberrypi_clk_data { + struct clk_hw hw; - struct clk_hw pllb; - struct clk_hw *pllb_arm; - struct clk_lookup *pllb_arm_lookup; + unsigned int id; + + struct raspberrypi_clk *rpi; }; /* @@ -64,11 +90,12 @@ struct raspberrypi_firmware_prop { __le32 disable_turbo; } __packed; -static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag, - u32 clk, u32 *val) +static int raspberrypi_clock_property(struct rpi_firmware *firmware, + const struct raspberrypi_clk_data *data, + u32 tag, u32 *val) { struct raspberrypi_firmware_prop msg = { - .id = cpu_to_le32(clk), + .id = cpu_to_le32(data->id), .val = cpu_to_le32(*val), .disable_turbo = cpu_to_le32(1), }; @@ -83,16 +110,16 @@ static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag, return 0; } -static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) +static int raspberrypi_fw_is_prepared(struct clk_hw *hw) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; u32 val = 0; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_GET_CLOCK_STATE, - RPI_FIRMWARE_ARM_CLK_ID, &val); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_GET_CLOCK_STATE, &val); if (ret) return 0; @@ -100,36 +127,34 @@ static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) } -static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw, + unsigned long parent_rate) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; u32 val = 0; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_GET_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, - &val); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_GET_CLOCK_RATE, &val); if (ret) return ret; - return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + return val; } -static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) +static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); - u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + struct raspberrypi_clk_data *data = + container_of(hw, struct raspberrypi_clk_data, hw); + struct raspberrypi_clk *rpi = data->rpi; + u32 _rate = rate; int ret; - ret = raspberrypi_clock_property(rpi->firmware, - RPI_FIRMWARE_SET_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, - &new_rate); + ret = raspberrypi_clock_property(rpi->firmware, data, + RPI_FIRMWARE_SET_CLOCK_RATE, &_rate); if (ret) dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", clk_hw_get_name(hw), ret); @@ -137,111 +162,128 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, return ret; } -/* - * Sadly there is no firmware rate rounding interface. We borrowed it from - * clk-bcm2835. - */ -static int raspberrypi_pll_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) +static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) { - struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, - pllb); - u64 div, final_rate; - u32 ndiv, fdiv; - - /* We can't use req->rate directly as it would overflow */ - final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate); - - div = (u64)final_rate << A2W_PLL_FRAC_BITS; - do_div(div, req->best_parent_rate); - - ndiv = div >> A2W_PLL_FRAC_BITS; - fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1); - - final_rate = ((u64)req->best_parent_rate * - ((ndiv << A2W_PLL_FRAC_BITS) + fdiv)); - - req->rate = final_rate >> A2W_PLL_FRAC_BITS; - + /* + * The firmware will do the rounding but that isn't part of + * the interface with the firmware, so we just do our best + * here. + */ + req->rate = clamp(req->rate, req->min_rate, req->max_rate); return 0; } -static const struct clk_ops raspberrypi_firmware_pll_clk_ops = { - .is_prepared = raspberrypi_fw_pll_is_on, - .recalc_rate = raspberrypi_fw_pll_get_rate, - .set_rate = raspberrypi_fw_pll_set_rate, - .determine_rate = raspberrypi_pll_determine_rate, +static const struct clk_ops raspberrypi_firmware_clk_ops = { + .is_prepared = raspberrypi_fw_is_prepared, + .recalc_rate = raspberrypi_fw_get_rate, + .determine_rate = raspberrypi_fw_dumb_determine_rate, + .set_rate = raspberrypi_fw_set_rate, }; -static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi) +static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi, + unsigned int parent, + unsigned int id) { - u32 min_rate = 0, max_rate = 0; - struct clk_init_data init; + struct raspberrypi_clk_data *data; + struct clk_init_data init = {}; + u32 min_rate, max_rate; int ret; - memset(&init, 0, sizeof(init)); + data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + data->rpi = rpi; + data->id = id; - /* All of the PLLs derive from the external oscillator. */ - init.parent_names = (const char *[]){ "osc" }; - init.num_parents = 1; - init.name = "pllb"; - init.ops = &raspberrypi_firmware_pll_clk_ops; - init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED; + init.name = devm_kasprintf(rpi->dev, GFP_KERNEL, + "fw-clk-%s", + rpi_firmware_clk_names[id]); + init.ops = &raspberrypi_firmware_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE; - /* Get min & max rates set by the firmware */ - ret = raspberrypi_clock_property(rpi->firmware, + data->hw.init = &init; + + ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_GET_MIN_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, &min_rate); if (ret) { - dev_err(rpi->dev, "Failed to get %s min freq: %d\n", - init.name, ret); - return ret; + dev_err(rpi->dev, "Failed to get clock %d min freq: %d", + id, ret); + return ERR_PTR(ret); } - ret = raspberrypi_clock_property(rpi->firmware, + ret = raspberrypi_clock_property(rpi->firmware, data, RPI_FIRMWARE_GET_MAX_CLOCK_RATE, - RPI_FIRMWARE_ARM_CLK_ID, &max_rate); if (ret) { - dev_err(rpi->dev, "Failed to get %s max freq: %d\n", - init.name, ret); - return ret; - } - - if (!min_rate || !max_rate) { - dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n", - min_rate, max_rate); - return -EINVAL; + dev_err(rpi->dev, "Failed to get clock %d max freq: %d\n", + id, ret); + return ERR_PTR(ret); } - dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n", - min_rate, max_rate); + ret = devm_clk_hw_register(rpi->dev, &data->hw); + if (ret) + return ERR_PTR(ret); - rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; - rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + clk_hw_set_rate_range(&data->hw, min_rate, max_rate); - rpi->pllb.init = &init; + if (id == RPI_FIRMWARE_ARM_CLK_ID) { + ret = devm_clk_hw_register_clkdev(rpi->dev, &data->hw, + NULL, "cpu0"); + if (ret) { + dev_err(rpi->dev, "Failed to initialize clkdev\n"); + return ERR_PTR(ret); + } + } - return devm_clk_hw_register(rpi->dev, &rpi->pllb); + return &data->hw; } -static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) +struct rpi_firmware_get_clocks_response { + u32 parent; + u32 id; +}; + +static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi, + struct clk_hw_onecell_data *data) { - rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev, - "pllb_arm", "pllb", - CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, - 1, 2); - if (IS_ERR(rpi->pllb_arm)) { - dev_err(rpi->dev, "Failed to initialize pllb_arm\n"); - return PTR_ERR(rpi->pllb_arm); - } + struct rpi_firmware_get_clocks_response *clks; + int ret; - rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0"); - if (!rpi->pllb_arm_lookup) { - dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n"); - clk_hw_unregister_fixed_factor(rpi->pllb_arm); + clks = devm_kcalloc(rpi->dev, + sizeof(*clks), RPI_FIRMWARE_NUM_CLK_ID, + GFP_KERNEL); + if (!clks) return -ENOMEM; + + ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS, + clks, + sizeof(*clks) * RPI_FIRMWARE_NUM_CLK_ID); + if (ret) + return ret; + + while (clks->id) { + struct clk_hw *hw; + + switch (clks->id) { + case RPI_FIRMWARE_ARM_CLK_ID: + case RPI_FIRMWARE_CORE_CLK_ID: + case RPI_FIRMWARE_M2MC_CLK_ID: + case RPI_FIRMWARE_V3D_CLK_ID: + hw = raspberrypi_clk_register(rpi, clks->parent, + clks->id); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + data->hws[clks->id] = hw; + data->num = clks->id + 1; + fallthrough; + + default: + clks++; + break; + } } return 0; @@ -249,14 +291,23 @@ static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) static int raspberrypi_clk_probe(struct platform_device *pdev) { + struct clk_hw_onecell_data *clk_data; struct device_node *firmware_node; struct device *dev = &pdev->dev; struct rpi_firmware *firmware; struct raspberrypi_clk *rpi; int ret; - firmware_node = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); + /* + * We can be probed either through the an old-fashioned + * platform device registration or through a DT node that is a + * child of the firmware node. Handle both cases. + */ + if (dev->of_node) + firmware_node = of_get_parent(dev->of_node); + else + firmware_node = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); if (!firmware_node) { dev_err(dev, "Missing firmware node\n"); return -ENOENT; @@ -275,13 +326,18 @@ static int raspberrypi_clk_probe(struct platform_device *pdev) rpi->firmware = firmware; platform_set_drvdata(pdev, rpi); - ret = raspberrypi_register_pllb(rpi); - if (ret) { - dev_err(dev, "Failed to initialize pllb, %d\n", ret); + clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, + RPI_FIRMWARE_NUM_CLK_ID), + GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + ret = raspberrypi_discover_clocks(rpi, clk_data); + if (ret) return ret; - } - ret = raspberrypi_register_pllb_arm(rpi); + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + clk_data); if (ret) return ret; @@ -300,9 +356,16 @@ static int raspberrypi_clk_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id raspberrypi_clk_match[] = { + { .compatible = "raspberrypi,firmware-clocks" }, + { }, +}; +MODULE_DEVICE_TABLE(of, raspberrypi_clk_match); + static struct platform_driver raspberrypi_clk_driver = { .driver = { .name = "raspberrypi-clk", + .of_match_table = raspberrypi_clk_match, }, .probe = raspberrypi_clk_probe, .remove = raspberrypi_clk_remove, diff --git a/drivers/clk/clk-cdce706.c b/drivers/clk/clk-cdce706.c index 239102e37e2f..c91e9096b070 100644 --- a/drivers/clk/clk-cdce706.c +++ b/drivers/clk/clk-cdce706.c @@ -4,7 +4,7 @@ * * Copyright (c) 2014 Cadence Design Systems Inc. * - * Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf + * Reference: https://www.ti.com/lit/ds/symlink/cdce706.pdf */ #include <linux/clk.h> diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c index 70397b4b5ffe..38755a241ab7 100644 --- a/drivers/clk/clk-gpio.c +++ b/drivers/clk/clk-gpio.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - https://www.ti.com * * Authors: * Jyri Sarha <jsarha@ti.com> diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 71de3618e508..1e1702e609cb 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -7,9 +7,9 @@ * * References: * [1] "Si5351A/B/C Data Sheet" - * http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf + * https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf * [2] "Manually Generating an Si5351 Register Map" - * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf + * https://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf */ #include <linux/module.h> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c index fa96659f8023..9a5fb3834b9a 100644 --- a/drivers/clk/clk-versaclock5.c +++ b/drivers/clk/clk-versaclock5.c @@ -24,6 +24,8 @@ #include <linux/regmap.h> #include <linux/slab.h> +#include <dt-bindings/clk/versaclock.h> + /* VersaClock5 registers */ #define VC5_OTP_CONTROL 0x00 @@ -89,6 +91,28 @@ /* Clock control register for clock 1,2 */ #define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n)) +#define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT 5 +#define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT) + +#define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL (VC5_LVPECL) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS (VC5_CMOS) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33 (VC5_HCSL33) +#define VC5_CLK_OUTPUT_CFG0_CFG_LVDS (VC5_LVDS) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2 (VC5_CMOS2) +#define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD (VC5_CMOSD) +#define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25 (VC5_HCSL25) + +#define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT 3 +#define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_18 (0<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_25 (2<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_PWR_33 (3<<VC5_CLK_OUTPUT_CFG0_PWR_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT 0 +#define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_80 (0<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_85 (1<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_90 (2<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) +#define VC5_CLK_OUTPUT_CFG0_SLEW_100 (3<<VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT) #define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0) #define VC5_CLK_OE_SHDN 0x68 @@ -143,6 +167,8 @@ struct vc5_hw_data { u32 div_int; u32 div_frc; unsigned int num; + unsigned int clk_output_cfg0; + unsigned int clk_output_cfg0_mask; }; struct vc5_driver_data { @@ -161,30 +187,6 @@ struct vc5_driver_data { struct vc5_hw_data clk_out[VC5_MAX_CLK_OUT_NUM]; }; -static const char * const vc5_mux_names[] = { - "mux" -}; - -static const char * const vc5_dbl_names[] = { - "dbl" -}; - -static const char * const vc5_pfd_names[] = { - "pfd" -}; - -static const char * const vc5_pll_names[] = { - "pll" -}; - -static const char * const vc5_fod_names[] = { - "fod0", "fod1", "fod2", "fod3", -}; - -static const char * const vc5_clk_out_names[] = { - "out0_sel_i2cb", "out1", "out2", "out3", "out4", -}; - /* * VersaClock5 i2c regmap */ @@ -591,6 +593,17 @@ static int vc5_clk_out_prepare(struct clk_hw *hw) regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1), VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, VC5_CLK_OUTPUT_CFG1_EN_CLKBUF); + if (hwdata->clk_output_cfg0_mask) { + dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n", + hwdata->num, hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + + regmap_update_bits(vc5->regmap, + VC5_CLK_OUTPUT_CFG(hwdata->num, 0), + hwdata->clk_output_cfg0_mask, + hwdata->clk_output_cfg0); + } + return 0; } @@ -690,10 +703,123 @@ static int vc5_map_index_to_output(const enum vc5_model model, } } +static int vc5_update_mode(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,mode", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK; + switch (value) { + case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33: + case VC5_CLK_OUTPUT_CFG0_CFG_LVDS: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2: + case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD: + case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25: + clk_out->clk_output_cfg0 |= + value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_power(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, + "idt,voltage-microvolts", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK; + switch (value) { + case 1800000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18; + break; + case 2500000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25; + break; + case 3300000: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_update_slew(struct device_node *np_output, + struct vc5_hw_data *clk_out) +{ + u32 value; + + if (!of_property_read_u32(np_output, "idt,slew-percent", &value)) { + clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK; + switch (value) { + case 80: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80; + break; + case 85: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85; + break; + case 90: + clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90; + break; + case 100: + clk_out->clk_output_cfg0 |= + VC5_CLK_OUTPUT_CFG0_SLEW_100; + break; + default: + return -EINVAL; + } + } + return 0; +} + +static int vc5_get_output_config(struct i2c_client *client, + struct vc5_hw_data *clk_out) +{ + struct device_node *np_output; + char *child_name; + int ret = 0; + + child_name = kasprintf(GFP_KERNEL, "OUT%d", clk_out->num + 1); + np_output = of_get_child_by_name(client->dev.of_node, child_name); + kfree(child_name); + if (!np_output) + goto output_done; + + ret = vc5_update_mode(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_power(np_output, clk_out); + if (ret) + goto output_error; + + ret = vc5_update_slew(np_output, clk_out); + +output_error: + if (ret) { + dev_err(&client->dev, + "Invalid clock output configuration OUT%d\n", + clk_out->num + 1); + } + + of_node_put(np_output); + +output_done: + return ret; +} + static const struct of_device_id clk_vc5_of_match[]; -static int vc5_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int vc5_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct vc5_driver_data *vc5; struct clk_init_data init; @@ -742,7 +868,7 @@ static int vc5_probe(struct i2c_client *client, if (!IS_ERR(vc5->pin_clkin)) { vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN; parent_names[init.num_parents++] = - __clk_get_name(vc5->pin_clkin); + __clk_get_name(vc5->pin_clkin); } if (!init.num_parents) { @@ -750,12 +876,13 @@ static int vc5_probe(struct i2c_client *client, return -EINVAL; } - init.name = vc5_mux_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.mux", client->dev.of_node); init.ops = &vc5_mux_ops; init.flags = 0; init.parent_names = parent_names; vc5->clk_mux.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); goto err_clk; @@ -764,13 +891,16 @@ static int vc5_probe(struct i2c_client *client, if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) { /* Register frequency doubler */ memset(&init, 0, sizeof(init)); - init.name = vc5_dbl_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.dbl", + client->dev.of_node); init.ops = &vc5_dbl_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_mux_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_mul.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_mul); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); @@ -780,16 +910,18 @@ static int vc5_probe(struct i2c_client *client, /* Register PFD */ memset(&init, 0, sizeof(init)); - init.name = vc5_pfd_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.pfd", client->dev.of_node); init.ops = &vc5_pfd_ops; init.flags = CLK_SET_RATE_PARENT; + init.parent_names = parent_names; if (vc5->chip_info->flags & VC5_HAS_PFD_FREQ_DBL) - init.parent_names = vc5_dbl_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mul); else - init.parent_names = vc5_mux_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_pfd.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_pfd); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); goto err_clk; @@ -797,15 +929,17 @@ static int vc5_probe(struct i2c_client *client, /* Register PLL */ memset(&init, 0, sizeof(init)); - init.name = vc5_pll_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.pll", client->dev.of_node); init.ops = &vc5_pll_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_pfd_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pfd); init.num_parents = 1; vc5->clk_pll.num = 0; vc5->clk_pll.vc5 = vc5; vc5->clk_pll.hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); goto err_clk; @@ -815,15 +949,18 @@ static int vc5_probe(struct i2c_client *client, for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) { idx = vc5_map_index_to_output(vc5->chip_info->model, n); memset(&init, 0, sizeof(init)); - init.name = vc5_fod_names[idx]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.fod%d", + client->dev.of_node, idx); init.ops = &vc5_fod_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_pll_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_pll.hw); init.num_parents = 1; vc5->clk_fod[n].num = idx; vc5->clk_fod[n].vc5 = vc5; vc5->clk_fod[n].hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); @@ -833,32 +970,36 @@ static int vc5_probe(struct i2c_client *client, /* Register MUX-connected OUT0_I2C_SELB output */ memset(&init, 0, sizeof(init)); - init.name = vc5_clk_out_names[0]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.out0_sel_i2cb", + client->dev.of_node); init.ops = &vc5_clk_out_ops; init.flags = CLK_SET_RATE_PARENT; - init.parent_names = vc5_mux_names; + init.parent_names = parent_names; + parent_names[0] = clk_hw_get_name(&vc5->clk_mux); init.num_parents = 1; vc5->clk_out[0].num = idx; vc5->clk_out[0].vc5 = vc5; vc5->clk_out[0].hw.init = &init; ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { - dev_err(&client->dev, "unable to register %s\n", - init.name); + dev_err(&client->dev, "unable to register %s\n", init.name); goto err_clk; } /* Register FOD-connected OUTx outputs */ for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) { idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1); - parent_names[0] = vc5_fod_names[idx]; + parent_names[0] = clk_hw_get_name(&vc5->clk_fod[idx].hw); if (n == 1) - parent_names[1] = vc5_mux_names[0]; + parent_names[1] = clk_hw_get_name(&vc5->clk_mux); else - parent_names[1] = vc5_clk_out_names[n - 1]; + parent_names[1] = + clk_hw_get_name(&vc5->clk_out[n - 1].hw); memset(&init, 0, sizeof(init)); - init.name = vc5_clk_out_names[idx + 1]; + init.name = kasprintf(GFP_KERNEL, "%pOFn.out%d", + client->dev.of_node, idx + 1); init.ops = &vc5_clk_out_ops; init.flags = CLK_SET_RATE_PARENT; init.parent_names = parent_names; @@ -866,13 +1007,18 @@ static int vc5_probe(struct i2c_client *client, vc5->clk_out[n].num = idx; vc5->clk_out[n].vc5 = vc5; vc5->clk_out[n].hw.init = &init; - ret = devm_clk_hw_register(&client->dev, - &vc5->clk_out[n].hw); + ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[n].hw); + kfree(init.name); /* clock framework made a copy of the name */ if (ret) { dev_err(&client->dev, "unable to register %s\n", init.name); goto err_clk; } + + /* Fetch Clock Output configuration from DT (if specified) */ + ret = vc5_get_output_config(client, &vc5->clk_out[n]); + if (ret) + goto err_clk; } ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5); diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 3f588ed06ce3..236923b25543 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -1400,6 +1400,21 @@ int __clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req) } EXPORT_SYMBOL_GPL(__clk_determine_rate); +/** + * clk_hw_round_rate() - round the given rate for a hw clk + * @hw: the hw clk for which we are rounding a rate + * @rate: the rate which is to be rounded + * + * Takes in a rate as input and rounds it to a rate that the clk can actually + * use. + * + * Context: prepare_lock must be held. + * For clk providers to call from within clk_ops such as .round_rate, + * .determine_rate. + * + * Return: returns rounded rate of hw clk if clk supports round_rate operation + * else returns the parent rate. + */ unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate) { int ret; diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c index 7edf8c8432b6..2ad26cb927fd 100644 --- a/drivers/clk/keystone/sci-clk.c +++ b/drivers/clk/keystone/sci-clk.c @@ -1,7 +1,7 @@ /* * SCI Clock driver for keystone based devices * - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ * Tero Kristo <t-kristo@ti.com> * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/clk/keystone/syscon-clk.c b/drivers/clk/keystone/syscon-clk.c index 8d7dbea3bd30..5b3d36462174 100644 --- a/drivers/clk/keystone/syscon-clk.c +++ b/drivers/clk/keystone/syscon-clk.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ */ #include <linux/clk-provider.h> diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c index 30c15766ebb1..9803d44bb157 100644 --- a/drivers/clk/meson/g12a.c +++ b/drivers/clk/meson/g12a.c @@ -3981,6 +3981,113 @@ static struct clk_regmap g12a_spicc1_sclk = { }, }; +/* Neural Network Accelerator source clock */ + +static const struct clk_parent_data nna_clk_parent_data[] = { + { .fw_name = "xtal", }, + { .hw = &g12a_gp0_pll.hw, }, + { .hw = &g12a_hifi_pll.hw, }, + { .hw = &g12a_fclk_div2p5.hw, }, + { .hw = &g12a_fclk_div3.hw, }, + { .hw = &g12a_fclk_div4.hw, }, + { .hw = &g12a_fclk_div5.hw, }, + { .hw = &g12a_fclk_div7.hw }, +}; + +static struct clk_regmap sm1_nna_axi_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_NNA_CLK_CNTL, + .mask = 7, + .shift = 9, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_axi_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = nna_clk_parent_data, + .num_parents = ARRAY_SIZE(nna_clk_parent_data), + }, +}; + +static struct clk_regmap sm1_nna_axi_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_NNA_CLK_CNTL, + .shift = 0, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_axi_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sm1_nna_axi_clk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sm1_nna_axi_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_NNA_CLK_CNTL, + .bit_idx = 8, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_axi_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sm1_nna_axi_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sm1_nna_core_clk_sel = { + .data = &(struct clk_regmap_mux_data){ + .offset = HHI_NNA_CLK_CNTL, + .mask = 7, + .shift = 25, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_core_clk_sel", + .ops = &clk_regmap_mux_ops, + .parent_data = nna_clk_parent_data, + .num_parents = ARRAY_SIZE(nna_clk_parent_data), + }, +}; + +static struct clk_regmap sm1_nna_core_clk_div = { + .data = &(struct clk_regmap_div_data){ + .offset = HHI_NNA_CLK_CNTL, + .shift = 16, + .width = 7, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_core_clk_div", + .ops = &clk_regmap_divider_ops, + .parent_hws = (const struct clk_hw *[]) { + &sm1_nna_core_clk_sel.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_regmap sm1_nna_core_clk = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_NNA_CLK_CNTL, + .bit_idx = 24, + }, + .hw.init = &(struct clk_init_data){ + .name = "nna_core_clk", + .ops = &clk_regmap_gate_ops, + .parent_hws = (const struct clk_hw *[]) { + &sm1_nna_core_clk_div.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + #define MESON_GATE(_name, _reg, _bit) \ MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw) @@ -4779,6 +4886,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = { [CLKID_SPICC1_SCLK_SEL] = &g12a_spicc1_sclk_sel.hw, [CLKID_SPICC1_SCLK_DIV] = &g12a_spicc1_sclk_div.hw, [CLKID_SPICC1_SCLK] = &g12a_spicc1_sclk.hw, + [CLKID_NNA_AXI_CLK_SEL] = &sm1_nna_axi_clk_sel.hw, + [CLKID_NNA_AXI_CLK_DIV] = &sm1_nna_axi_clk_div.hw, + [CLKID_NNA_AXI_CLK] = &sm1_nna_axi_clk.hw, + [CLKID_NNA_CORE_CLK_SEL] = &sm1_nna_core_clk_sel.hw, + [CLKID_NNA_CORE_CLK_DIV] = &sm1_nna_core_clk_div.hw, + [CLKID_NNA_CORE_CLK] = &sm1_nna_core_clk.hw, [NR_CLKS] = NULL, }, .num = NR_CLKS, @@ -5020,6 +5133,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = { &g12a_spicc1_sclk_sel, &g12a_spicc1_sclk_div, &g12a_spicc1_sclk, + &sm1_nna_axi_clk_sel, + &sm1_nna_axi_clk_div, + &sm1_nna_axi_clk, + &sm1_nna_core_clk_sel, + &sm1_nna_core_clk_div, + &sm1_nna_core_clk, }; static const struct reg_sequence g12a_init_regs[] = { diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h index a8852556836e..69b6a69549c7 100644 --- a/drivers/clk/meson/g12a.h +++ b/drivers/clk/meson/g12a.h @@ -70,6 +70,7 @@ #define HHI_MALI_CLK_CNTL 0x1b0 #define HHI_VPU_CLKC_CNTL 0x1b4 #define HHI_VPU_CLK_CNTL 0x1bC +#define HHI_NNA_CLK_CNTL 0x1C8 #define HHI_HDMI_CLK_CNTL 0x1CC #define HHI_VDEC_CLK_CNTL 0x1E0 #define HHI_VDEC2_CLK_CNTL 0x1E4 @@ -259,8 +260,12 @@ #define CLKID_SPICC0_SCLK_DIV 257 #define CLKID_SPICC1_SCLK_SEL 259 #define CLKID_SPICC1_SCLK_DIV 260 +#define CLKID_NNA_AXI_CLK_SEL 262 +#define CLKID_NNA_AXI_CLK_DIV 263 +#define CLKID_NNA_CORE_CLK_SEL 265 +#define CLKID_NNA_CORE_CLK_DIV 266 -#define NR_CLKS 262 +#define NR_CLKS 268 /* include the CLKIDs that have been made part of the DT binding */ #include <dt-bindings/clock/g12a-clkc.h> diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index edc09d050ecf..862f0756b50f 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -293,13 +293,6 @@ static struct clk_regmap meson8b_fclk_div2 = { &meson8b_fclk_div2_div.hw }, .num_parents = 1, - /* - * FIXME: Ethernet with a RGMII PHYs is not working if - * fclk_div2 is disabled. it is currently unclear why this - * is. keep it enabled until the Ethernet driver knows how - * to manage this clock. - */ - .flags = CLK_IS_CRITICAL, }, }; @@ -1211,6 +1204,22 @@ static struct clk_regmap meson8b_vclk_in_en = { }, }; +static struct clk_regmap meson8b_vclk_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_VID_CLK_CNTL, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk_en", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &meson8b_vclk_in_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + static struct clk_regmap meson8b_vclk_div1_gate = { .data = &(struct clk_regmap_gate_data){ .offset = HHI_VID_CLK_CNTL, @@ -1220,7 +1229,7 @@ static struct clk_regmap meson8b_vclk_div1_gate = { .name = "vclk_div1_en", .ops = &clk_regmap_gate_ro_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk_in_en.hw + &meson8b_vclk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1234,7 +1243,7 @@ static struct clk_fixed_factor meson8b_vclk_div2_div = { .name = "vclk_div2", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk_in_en.hw + &meson8b_vclk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1264,7 +1273,7 @@ static struct clk_fixed_factor meson8b_vclk_div4_div = { .name = "vclk_div4", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk_in_en.hw + &meson8b_vclk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1294,7 +1303,7 @@ static struct clk_fixed_factor meson8b_vclk_div6_div = { .name = "vclk_div6", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk_in_en.hw + &meson8b_vclk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1324,7 +1333,7 @@ static struct clk_fixed_factor meson8b_vclk_div12_div = { .name = "vclk_div12", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk_in_en.hw + &meson8b_vclk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1378,6 +1387,22 @@ static struct clk_regmap meson8b_vclk2_clk_in_en = { }, }; +static struct clk_regmap meson8b_vclk2_clk_en = { + .data = &(struct clk_regmap_gate_data){ + .offset = HHI_VIID_CLK_DIV, + .bit_idx = 19, + }, + .hw.init = &(struct clk_init_data){ + .name = "vclk2_en", + .ops = &clk_regmap_gate_ro_ops, + .parent_hws = (const struct clk_hw *[]) { + &meson8b_vclk2_clk_in_en.hw + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }, +}; + static struct clk_regmap meson8b_vclk2_div1_gate = { .data = &(struct clk_regmap_gate_data){ .offset = HHI_VIID_CLK_DIV, @@ -1387,7 +1412,7 @@ static struct clk_regmap meson8b_vclk2_div1_gate = { .name = "vclk2_div1_en", .ops = &clk_regmap_gate_ro_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk2_clk_in_en.hw + &meson8b_vclk2_clk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1401,7 +1426,7 @@ static struct clk_fixed_factor meson8b_vclk2_div2_div = { .name = "vclk2_div2", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk2_clk_in_en.hw + &meson8b_vclk2_clk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1431,7 +1456,7 @@ static struct clk_fixed_factor meson8b_vclk2_div4_div = { .name = "vclk2_div4", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk2_clk_in_en.hw + &meson8b_vclk2_clk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1461,7 +1486,7 @@ static struct clk_fixed_factor meson8b_vclk2_div6_div = { .name = "vclk2_div6", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk2_clk_in_en.hw + &meson8b_vclk2_clk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -1491,7 +1516,7 @@ static struct clk_fixed_factor meson8b_vclk2_div12_div = { .name = "vclk2_div12", .ops = &clk_fixed_factor_ops, .parent_hws = (const struct clk_hw *[]) { - &meson8b_vclk2_clk_in_en.hw + &meson8b_vclk2_clk_en.hw }, .num_parents = 1, .flags = CLK_SET_RATE_PARENT, @@ -2827,6 +2852,7 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = { [CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw, [CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw, [CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw, + [CLKID_VCLK_EN] = &meson8b_vclk_en.hw, [CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw, [CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw, [CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw, @@ -2838,6 +2864,7 @@ static struct clk_hw_onecell_data meson8_hw_onecell_data = { [CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw, [CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw, [CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw, + [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw, [CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw, [CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw, [CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw, @@ -3032,6 +3059,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { [CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw, [CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw, [CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw, + [CLKID_VCLK_EN] = &meson8b_vclk_en.hw, [CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw, [CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw, [CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw, @@ -3043,6 +3071,7 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { [CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw, [CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw, [CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw, + [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw, [CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw, [CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw, [CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw, @@ -3248,6 +3277,7 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = { [CLKID_VID_PLL_FINAL_DIV] = &meson8b_vid_pll_final_div.hw, [CLKID_VCLK_IN_SEL] = &meson8b_vclk_in_sel.hw, [CLKID_VCLK_IN_EN] = &meson8b_vclk_in_en.hw, + [CLKID_VCLK_EN] = &meson8b_vclk_en.hw, [CLKID_VCLK_DIV1] = &meson8b_vclk_div1_gate.hw, [CLKID_VCLK_DIV2_DIV] = &meson8b_vclk_div2_div.hw, [CLKID_VCLK_DIV2] = &meson8b_vclk_div2_div_gate.hw, @@ -3259,6 +3289,7 @@ static struct clk_hw_onecell_data meson8m2_hw_onecell_data = { [CLKID_VCLK_DIV12] = &meson8b_vclk_div12_div_gate.hw, [CLKID_VCLK2_IN_SEL] = &meson8b_vclk2_in_sel.hw, [CLKID_VCLK2_IN_EN] = &meson8b_vclk2_clk_in_en.hw, + [CLKID_VCLK2_EN] = &meson8b_vclk2_clk_en.hw, [CLKID_VCLK2_DIV1] = &meson8b_vclk2_div1_gate.hw, [CLKID_VCLK2_DIV2_DIV] = &meson8b_vclk2_div2_div.hw, [CLKID_VCLK2_DIV2] = &meson8b_vclk2_div2_div_gate.hw, @@ -3450,6 +3481,7 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = { &meson8b_vid_pll_final_div, &meson8b_vclk_in_sel, &meson8b_vclk_in_en, + &meson8b_vclk_en, &meson8b_vclk_div1_gate, &meson8b_vclk_div2_div_gate, &meson8b_vclk_div4_div_gate, @@ -3457,6 +3489,7 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = { &meson8b_vclk_div12_div_gate, &meson8b_vclk2_in_sel, &meson8b_vclk2_clk_in_en, + &meson8b_vclk2_clk_en, &meson8b_vclk2_div1_gate, &meson8b_vclk2_div2_div_gate, &meson8b_vclk2_div4_div_gate, diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h index cd38ae2a9cb5..b1a5074cf148 100644 --- a/drivers/clk/meson/meson8b.h +++ b/drivers/clk/meson/meson8b.h @@ -17,7 +17,7 @@ * blocks below. Those offsets must be multiplied by 4 before adding them to * the base address to get the right value * - * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf + * [0] https://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf */ #define HHI_GP_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ #define HHI_GP_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ @@ -180,8 +180,10 @@ #define CLKID_CTS_AMCLK_DIV 208 #define CLKID_CTS_MCLK_I958_SEL 210 #define CLKID_CTS_MCLK_I958_DIV 211 +#define CLKID_VCLK_EN 214 +#define CLKID_VCLK2_EN 215 -#define CLK_NR_CLKS 214 +#define CLK_NR_CLKS 216 /* * include the CLKID and RESETID that have diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index cde6ca90a06b..318c0adfaae1 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -37,6 +37,15 @@ config QCOM_CLK_APCS_MSM8916 Say Y if you want to support CPU frequency scaling on devices such as msm8916. +config QCOM_CLK_APCC_MSM8996 + tristate "MSM8996 CPU Clock Controller" + select QCOM_KRYO_L2_ACCESSORS + depends on ARM64 + help + Support for the CPU clock controller on msm8996 devices. + Say Y if you want to support CPU clock scaling using CPUfreq + drivers for dyanmic power management. + config QCOM_CLK_RPM tristate "RPM based Clock Controller" depends on MFD_QCOM_RPM @@ -89,6 +98,25 @@ config APQ_MMCC_8084 Say Y if you want to support multimedia devices such as display, graphics, video encode/decode, camera, etc. +config IPQ_APSS_PLL + tristate "IPQ APSS PLL" + help + Support for APSS PLL on ipq devices. The APSS PLL is the main + clock that feeds the CPUs on ipq based devices. + Say Y if you want to support CPU frequency scaling on ipq based + devices. + +config IPQ_APSS_6018 + tristate "IPQ APSS Clock Controller" + select IPQ_APSS_PLL + depends on QCOM_APCS_IPC || COMPILE_TEST + help + Support for APSS clock controller on IPQ platforms. The + APSS clock controller manages the Mux and enable block that feeds the + CPUs. + Say Y if you want to support CPU frequency scaling on + ipq based devices. + config IPQ_GCC_4019 tristate "IPQ4019 Global Clock Controller" help diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 7ec8561a1270..ae0979bebe18 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -19,6 +19,8 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o # Keep alphabetically sorted by config obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o +obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o +obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o @@ -42,6 +44,7 @@ obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o obj-$(CONFIG_MSM_MMCC_8998) += mmcc-msm8998.o obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o +obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c new file mode 100644 index 000000000000..30be87fb222a --- /dev/null +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, The Linux Foundation. All rights reserved. +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "clk-alpha-pll.h" + +static const u8 ipq_pll_offsets[] = { + [PLL_OFF_L_VAL] = 0x08, + [PLL_OFF_ALPHA_VAL] = 0x10, + [PLL_OFF_USER_CTL] = 0x18, + [PLL_OFF_CONFIG_CTL] = 0x20, + [PLL_OFF_CONFIG_CTL_U] = 0x24, + [PLL_OFF_STATUS] = 0x28, + [PLL_OFF_TEST_CTL] = 0x30, + [PLL_OFF_TEST_CTL_U] = 0x34, +}; + +static struct clk_alpha_pll ipq_pll = { + .offset = 0x0, + .regs = ipq_pll_offsets, + .flags = SUPPORTS_DYNAMIC_UPDATE, + .clkr = { + .enable_reg = 0x0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "a53pll", + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_huayra_ops, + }, + }, +}; + +static const struct alpha_pll_config ipq_pll_config = { + .l = 0x37, + .config_ctl_val = 0x04141200, + .config_ctl_hi_val = 0x0, + .early_output_mask = BIT(3), + .main_output_mask = BIT(0), +}; + +static const struct regmap_config ipq_pll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x40, + .fast_io = true, +}; + +static int apss_ipq_pll_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + void __iomem *base; + int ret; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &ipq_pll_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config); + + ret = devm_clk_register_regmap(dev, &ipq_pll.clkr); + if (ret) + return ret; + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + &ipq_pll.clkr.hw); +} + +static const struct of_device_id apss_ipq_pll_match_table[] = { + { .compatible = "qcom,ipq6018-a53pll" }, + { } +}; + +static struct platform_driver apss_ipq_pll_driver = { + .probe = apss_ipq_pll_probe, + .driver = { + .name = "qcom-ipq-apss-pll", + .of_match_table = apss_ipq_pll_match_table, + }, +}; +module_platform_driver(apss_ipq_pll_driver); + +MODULE_DESCRIPTION("Qualcomm technology Inc APSS ALPHA PLL Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/qcom/apss-ipq6018.c b/drivers/clk/qcom/apss-ipq6018.c new file mode 100644 index 000000000000..d78ff2f310bf --- /dev/null +++ b/drivers/clk/qcom/apss-ipq6018.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/module.h> + +#include <dt-bindings/clock/qcom,apss-ipq.h> + +#include "common.h" +#include "clk-regmap.h" +#include "clk-branch.h" +#include "clk-alpha-pll.h" +#include "clk-regmap-mux.h" + +enum { + P_XO, + P_APSS_PLL_EARLY, +}; + +static const struct clk_parent_data parents_apcs_alias0_clk_src[] = { + { .fw_name = "xo" }, + { .fw_name = "pll" }, +}; + +static const struct parent_map parents_apcs_alias0_clk_src_map[] = { + { P_XO, 0 }, + { P_APSS_PLL_EARLY, 5 }, +}; + +static struct clk_regmap_mux apcs_alias0_clk_src = { + .reg = 0x0050, + .width = 3, + .shift = 7, + .parent_map = parents_apcs_alias0_clk_src_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apcs_alias0_clk_src", + .parent_data = parents_apcs_alias0_clk_src, + .num_parents = 2, + .ops = &clk_regmap_mux_closest_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_branch apcs_alias0_core_clk = { + .halt_reg = 0x0058, + .clkr = { + .enable_reg = 0x0058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "apcs_alias0_core_clk", + .parent_hws = (const struct clk_hw *[]){ + &apcs_alias0_clk_src.clkr.hw }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static const struct regmap_config apss_ipq6018_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x1000, + .fast_io = true, +}; + +static struct clk_regmap *apss_ipq6018_clks[] = { + [APCS_ALIAS0_CLK_SRC] = &apcs_alias0_clk_src.clkr, + [APCS_ALIAS0_CORE_CLK] = &apcs_alias0_core_clk.clkr, +}; + +static const struct qcom_cc_desc apss_ipq6018_desc = { + .config = &apss_ipq6018_regmap_config, + .clks = apss_ipq6018_clks, + .num_clks = ARRAY_SIZE(apss_ipq6018_clks), +}; + +static int apss_ipq6018_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) + return -ENODEV; + + return qcom_cc_really_probe(pdev, &apss_ipq6018_desc, regmap); +} + +static struct platform_driver apss_ipq6018_driver = { + .probe = apss_ipq6018_probe, + .driver = { + .name = "qcom,apss-ipq6018-clk", + }, +}; + +module_platform_driver(apss_ipq6018_driver); + +MODULE_DESCRIPTION("QCOM APSS IPQ 6018 CLK Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h index 704674a153b6..1ba82be93dd5 100644 --- a/drivers/clk/qcom/clk-alpha-pll.h +++ b/drivers/clk/qcom/clk-alpha-pll.h @@ -47,6 +47,12 @@ struct pll_vco { u32 val; }; +#define VCO(a, b, c) { \ + .val = a,\ + .min_freq = b,\ + .max_freq = c,\ +} + /** * struct clk_alpha_pll - phase locked loop (PLL) * @offset: base address of registers diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c new file mode 100644 index 000000000000..4a4fde8dd12d --- /dev/null +++ b/drivers/clk/qcom/clk-cpu-8996.c @@ -0,0 +1,538 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/* + * Each of the CPU clusters (Power and Perf) on msm8996 are + * clocked via 2 PLLs, a primary and alternate. There are also + * 2 Mux'es, a primary and secondary all connected together + * as shown below + * + * +-------+ + * XO | | + * +------------------>0 | + * | | + * PLL/2 | SMUX +----+ + * +------->1 | | + * | | | | + * | +-------+ | +-------+ + * | +---->0 | + * | | | + * +---------------+ | +----------->1 | CPU clk + * |Primary PLL +----+ PLL_EARLY | | +------> + * | +------+-----------+ +------>2 PMUX | + * +---------------+ | | | | + * | +------+ | +-->3 | + * +--^+ ACD +-----+ | +-------+ + * +---------------+ +------+ | + * |Alt PLL | | + * | +---------------------------+ + * +---------------+ PLL_EARLY + * + * The primary PLL is what drives the CPU clk, except for times + * when we are reprogramming the PLL itself (for rate changes) when + * we temporarily switch to an alternate PLL. + * + * The primary PLL operates on a single VCO range, between 600MHz + * and 3GHz. However the CPUs do support OPPs with frequencies + * between 300MHz and 600MHz. In order to support running the CPUs + * at those frequencies we end up having to lock the PLL at twice + * the rate and drive the CPU clk via the PLL/2 output and SMUX. + * + * So for frequencies above 600MHz we follow the following path + * Primary PLL --> PLL_EARLY --> PMUX(1) --> CPU clk + * and for frequencies between 300MHz and 600MHz we follow + * Primary PLL --> PLL/2 --> SMUX(1) --> PMUX(0) --> CPU clk + * + * ACD stands for Adaptive Clock Distribution and is used to + * detect voltage droops. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <soc/qcom/kryo-l2-accessors.h> + +#include "clk-alpha-pll.h" +#include "clk-regmap.h" + +enum _pmux_input { + DIV_2_INDEX = 0, + PLL_INDEX, + ACD_INDEX, + ALT_INDEX, + NUM_OF_PMUX_INPUTS +}; + +#define DIV_2_THRESHOLD 600000000 +#define PWRCL_REG_OFFSET 0x0 +#define PERFCL_REG_OFFSET 0x80000 +#define MUX_OFFSET 0x40 +#define ALT_PLL_OFFSET 0x100 +#define SSSCTL_OFFSET 0x160 + +static const u8 prim_pll_regs[PLL_OFF_MAX_REGS] = { + [PLL_OFF_L_VAL] = 0x04, + [PLL_OFF_ALPHA_VAL] = 0x08, + [PLL_OFF_USER_CTL] = 0x10, + [PLL_OFF_CONFIG_CTL] = 0x18, + [PLL_OFF_CONFIG_CTL_U] = 0x1c, + [PLL_OFF_TEST_CTL] = 0x20, + [PLL_OFF_TEST_CTL_U] = 0x24, + [PLL_OFF_STATUS] = 0x28, +}; + +static const u8 alt_pll_regs[PLL_OFF_MAX_REGS] = { + [PLL_OFF_L_VAL] = 0x04, + [PLL_OFF_ALPHA_VAL] = 0x08, + [PLL_OFF_ALPHA_VAL_U] = 0x0c, + [PLL_OFF_USER_CTL] = 0x10, + [PLL_OFF_USER_CTL_U] = 0x14, + [PLL_OFF_CONFIG_CTL] = 0x18, + [PLL_OFF_TEST_CTL] = 0x20, + [PLL_OFF_TEST_CTL_U] = 0x24, + [PLL_OFF_STATUS] = 0x28, +}; + +/* PLLs */ + +static const struct alpha_pll_config hfpll_config = { + .l = 60, + .config_ctl_val = 0x200d4aa8, + .config_ctl_hi_val = 0x006, + .pre_div_mask = BIT(12), + .post_div_mask = 0x3 << 8, + .post_div_val = 0x1 << 8, + .main_output_mask = BIT(0), + .early_output_mask = BIT(3), +}; + +static struct clk_alpha_pll perfcl_pll = { + .offset = PERFCL_REG_OFFSET, + .regs = prim_pll_regs, + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE, + .clkr.hw.init = &(struct clk_init_data){ + .name = "perfcl_pll", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_alpha_pll_huayra_ops, + }, +}; + +static struct clk_alpha_pll pwrcl_pll = { + .offset = PWRCL_REG_OFFSET, + .regs = prim_pll_regs, + .flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pwrcl_pll", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_alpha_pll_huayra_ops, + }, +}; + +static const struct pll_vco alt_pll_vco_modes[] = { + VCO(3, 250000000, 500000000), + VCO(2, 500000000, 750000000), + VCO(1, 750000000, 1000000000), + VCO(0, 1000000000, 2150400000), +}; + +static const struct alpha_pll_config altpll_config = { + .l = 16, + .vco_val = 0x3 << 20, + .vco_mask = 0x3 << 20, + .config_ctl_val = 0x4001051b, + .post_div_mask = 0x3 << 8, + .post_div_val = 0x1 << 8, + .main_output_mask = BIT(0), + .early_output_mask = BIT(3), +}; + +static struct clk_alpha_pll perfcl_alt_pll = { + .offset = PERFCL_REG_OFFSET + ALT_PLL_OFFSET, + .regs = alt_pll_regs, + .vco_table = alt_pll_vco_modes, + .num_vco = ARRAY_SIZE(alt_pll_vco_modes), + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE, + .clkr.hw.init = &(struct clk_init_data) { + .name = "perfcl_alt_pll", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_alpha_pll_hwfsm_ops, + }, +}; + +static struct clk_alpha_pll pwrcl_alt_pll = { + .offset = PWRCL_REG_OFFSET + ALT_PLL_OFFSET, + .regs = alt_pll_regs, + .vco_table = alt_pll_vco_modes, + .num_vco = ARRAY_SIZE(alt_pll_vco_modes), + .flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE, + .clkr.hw.init = &(struct clk_init_data) { + .name = "pwrcl_alt_pll", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_alpha_pll_hwfsm_ops, + }, +}; + +struct clk_cpu_8996_mux { + u32 reg; + u8 shift; + u8 width; + struct notifier_block nb; + struct clk_hw *pll; + struct clk_hw *pll_div_2; + struct clk_regmap clkr; +}; + +static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, + void *data); + +#define to_clk_cpu_8996_mux_nb(_nb) \ + container_of(_nb, struct clk_cpu_8996_mux, nb) + +static inline struct clk_cpu_8996_mux *to_clk_cpu_8996_mux_hw(struct clk_hw *hw) +{ + return container_of(to_clk_regmap(hw), struct clk_cpu_8996_mux, clkr); +} + +static u8 clk_cpu_8996_mux_get_parent(struct clk_hw *hw) +{ + struct clk_regmap *clkr = to_clk_regmap(hw); + struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw); + u32 mask = GENMASK(cpuclk->width - 1, 0); + u32 val; + + regmap_read(clkr->regmap, cpuclk->reg, &val); + val >>= cpuclk->shift; + + return val & mask; +} + +static int clk_cpu_8996_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_regmap *clkr = to_clk_regmap(hw); + struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw); + u32 mask = GENMASK(cpuclk->width + cpuclk->shift - 1, cpuclk->shift); + u32 val; + + val = index; + val <<= cpuclk->shift; + + return regmap_update_bits(clkr->regmap, cpuclk->reg, mask, val); +} + +static int clk_cpu_8996_mux_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_hw(hw); + struct clk_hw *parent = cpuclk->pll; + + if (cpuclk->pll_div_2 && req->rate < DIV_2_THRESHOLD) { + if (req->rate < (DIV_2_THRESHOLD / 2)) + return -EINVAL; + + parent = cpuclk->pll_div_2; + } + + req->best_parent_rate = clk_hw_round_rate(parent, req->rate); + req->best_parent_hw = parent; + + return 0; +} + +static const struct clk_ops clk_cpu_8996_mux_ops = { + .set_parent = clk_cpu_8996_mux_set_parent, + .get_parent = clk_cpu_8996_mux_get_parent, + .determine_rate = clk_cpu_8996_mux_determine_rate, +}; + +static struct clk_cpu_8996_mux pwrcl_smux = { + .reg = PWRCL_REG_OFFSET + MUX_OFFSET, + .shift = 2, + .width = 2, + .clkr.hw.init = &(struct clk_init_data) { + .name = "pwrcl_smux", + .parent_names = (const char *[]){ + "xo", + "pwrcl_pll_main", + }, + .num_parents = 2, + .ops = &clk_cpu_8996_mux_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_cpu_8996_mux perfcl_smux = { + .reg = PERFCL_REG_OFFSET + MUX_OFFSET, + .shift = 2, + .width = 2, + .clkr.hw.init = &(struct clk_init_data) { + .name = "perfcl_smux", + .parent_names = (const char *[]){ + "xo", + "perfcl_pll_main", + }, + .num_parents = 2, + .ops = &clk_cpu_8996_mux_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static struct clk_cpu_8996_mux pwrcl_pmux = { + .reg = PWRCL_REG_OFFSET + MUX_OFFSET, + .shift = 0, + .width = 2, + .pll = &pwrcl_pll.clkr.hw, + .pll_div_2 = &pwrcl_smux.clkr.hw, + .nb.notifier_call = cpu_clk_notifier_cb, + .clkr.hw.init = &(struct clk_init_data) { + .name = "pwrcl_pmux", + .parent_names = (const char *[]){ + "pwrcl_smux", + "pwrcl_pll", + "pwrcl_pll_acd", + "pwrcl_alt_pll", + }, + .num_parents = 4, + .ops = &clk_cpu_8996_mux_ops, + /* CPU clock is critical and should never be gated */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static struct clk_cpu_8996_mux perfcl_pmux = { + .reg = PERFCL_REG_OFFSET + MUX_OFFSET, + .shift = 0, + .width = 2, + .pll = &perfcl_pll.clkr.hw, + .pll_div_2 = &perfcl_smux.clkr.hw, + .nb.notifier_call = cpu_clk_notifier_cb, + .clkr.hw.init = &(struct clk_init_data) { + .name = "perfcl_pmux", + .parent_names = (const char *[]){ + "perfcl_smux", + "perfcl_pll", + "perfcl_pll_acd", + "perfcl_alt_pll", + }, + .num_parents = 4, + .ops = &clk_cpu_8996_mux_ops, + /* CPU clock is critical and should never be gated */ + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, + }, +}; + +static const struct regmap_config cpu_msm8996_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x80210, + .fast_io = true, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +static struct clk_regmap *cpu_msm8996_clks[] = { + &perfcl_pll.clkr, + &pwrcl_pll.clkr, + &perfcl_alt_pll.clkr, + &pwrcl_alt_pll.clkr, + &perfcl_smux.clkr, + &pwrcl_smux.clkr, + &perfcl_pmux.clkr, + &pwrcl_pmux.clkr, +}; + +static int qcom_cpu_clk_msm8996_register_clks(struct device *dev, + struct regmap *regmap) +{ + int i, ret; + + perfcl_smux.pll = clk_hw_register_fixed_factor(dev, "perfcl_pll_main", + "perfcl_pll", + CLK_SET_RATE_PARENT, + 1, 2); + if (IS_ERR(perfcl_smux.pll)) { + dev_err(dev, "Failed to initialize perfcl_pll_main\n"); + return PTR_ERR(perfcl_smux.pll); + } + + pwrcl_smux.pll = clk_hw_register_fixed_factor(dev, "pwrcl_pll_main", + "pwrcl_pll", + CLK_SET_RATE_PARENT, + 1, 2); + if (IS_ERR(pwrcl_smux.pll)) { + dev_err(dev, "Failed to initialize pwrcl_pll_main\n"); + clk_hw_unregister(perfcl_smux.pll); + return PTR_ERR(pwrcl_smux.pll); + } + + for (i = 0; i < ARRAY_SIZE(cpu_msm8996_clks); i++) { + ret = devm_clk_register_regmap(dev, cpu_msm8996_clks[i]); + if (ret) { + clk_hw_unregister(perfcl_smux.pll); + clk_hw_unregister(pwrcl_smux.pll); + return ret; + } + } + + clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config); + clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config); + clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config); + clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config); + + /* Enable alt PLLs */ + clk_prepare_enable(pwrcl_alt_pll.clkr.hw.clk); + clk_prepare_enable(perfcl_alt_pll.clkr.hw.clk); + + clk_notifier_register(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb); + clk_notifier_register(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb); + + return ret; +} + +static int qcom_cpu_clk_msm8996_unregister_clks(void) +{ + int ret = 0; + + ret = clk_notifier_unregister(pwrcl_pmux.clkr.hw.clk, &pwrcl_pmux.nb); + if (ret) + return ret; + + ret = clk_notifier_unregister(perfcl_pmux.clkr.hw.clk, &perfcl_pmux.nb); + if (ret) + return ret; + + clk_hw_unregister(perfcl_smux.pll); + clk_hw_unregister(pwrcl_smux.pll); + + return 0; +} + +#define CPU_AFINITY_MASK 0xFFF +#define PWRCL_CPU_REG_MASK 0x3 +#define PERFCL_CPU_REG_MASK 0x103 + +#define L2ACDCR_REG 0x580ULL +#define L2ACDTD_REG 0x581ULL +#define L2ACDDVMRC_REG 0x584ULL +#define L2ACDSSCR_REG 0x589ULL + +static DEFINE_SPINLOCK(qcom_clk_acd_lock); +static void __iomem *base; + +static void qcom_cpu_clk_msm8996_acd_init(void __iomem *base) +{ + u64 hwid; + unsigned long flags; + + spin_lock_irqsave(&qcom_clk_acd_lock, flags); + + hwid = read_cpuid_mpidr() & CPU_AFINITY_MASK; + + kryo_l2_set_indirect_reg(L2ACDTD_REG, 0x00006a11); + kryo_l2_set_indirect_reg(L2ACDDVMRC_REG, 0x000e0f0f); + kryo_l2_set_indirect_reg(L2ACDSSCR_REG, 0x00000601); + + if (PWRCL_CPU_REG_MASK == (hwid | PWRCL_CPU_REG_MASK)) { + writel(0xf, base + PWRCL_REG_OFFSET + SSSCTL_OFFSET); + kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd); + } + + if (PERFCL_CPU_REG_MASK == (hwid | PERFCL_CPU_REG_MASK)) { + kryo_l2_set_indirect_reg(L2ACDCR_REG, 0x002c5ffd); + writel(0xf, base + PERFCL_REG_OFFSET + SSSCTL_OFFSET); + } + + spin_unlock_irqrestore(&qcom_clk_acd_lock, flags); +} + +static int cpu_clk_notifier_cb(struct notifier_block *nb, unsigned long event, + void *data) +{ + struct clk_cpu_8996_mux *cpuclk = to_clk_cpu_8996_mux_nb(nb); + struct clk_notifier_data *cnd = data; + int ret; + + switch (event) { + case PRE_RATE_CHANGE: + ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, ALT_INDEX); + qcom_cpu_clk_msm8996_acd_init(base); + break; + case POST_RATE_CHANGE: + if (cnd->new_rate < DIV_2_THRESHOLD) + ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, + DIV_2_INDEX); + else + ret = clk_cpu_8996_mux_set_parent(&cpuclk->clkr.hw, + ACD_INDEX); + break; + default: + ret = 0; + break; + } + + return notifier_from_errno(ret); +}; + +static int qcom_cpu_clk_msm8996_driver_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + struct clk_hw_onecell_data *data; + struct device *dev = &pdev->dev; + int ret; + + data = devm_kzalloc(dev, struct_size(data, hws, 2), GFP_KERNEL); + if (!data) + return -ENOMEM; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &cpu_msm8996_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + ret = qcom_cpu_clk_msm8996_register_clks(dev, regmap); + if (ret) + return ret; + + qcom_cpu_clk_msm8996_acd_init(base); + + data->hws[0] = &pwrcl_pmux.clkr.hw; + data->hws[1] = &perfcl_pmux.clkr.hw; + data->num = 2; + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data); +} + +static int qcom_cpu_clk_msm8996_driver_remove(struct platform_device *pdev) +{ + return qcom_cpu_clk_msm8996_unregister_clks(); +} + +static const struct of_device_id qcom_cpu_clk_msm8996_match_table[] = { + { .compatible = "qcom,msm8996-apcc" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_cpu_clk_msm8996_match_table); + +static struct platform_driver qcom_cpu_clk_msm8996_driver = { + .probe = qcom_cpu_clk_msm8996_driver_probe, + .remove = qcom_cpu_clk_msm8996_driver_remove, + .driver = { + .name = "qcom-msm8996-apcc", + .of_match_table = qcom_cpu_clk_msm8996_match_table, + }, +}; +module_platform_driver(qcom_cpu_clk_msm8996_driver); + +MODULE_DESCRIPTION("QCOM MSM8996 CPU Clock Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c index 52f63ad787ba..0e1dfa89489e 100644 --- a/drivers/clk/qcom/clk-smd-rpm.c +++ b/drivers/clk/qcom/clk-smd-rpm.c @@ -452,6 +452,55 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8916 = { .num_clks = ARRAY_SIZE(msm8916_clks), }; +/* msm8936 */ +DEFINE_CLK_SMD_RPM(msm8936, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8936, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8936, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8936, sysmmnoc_clk, sysmmnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM_QDSS(msm8936, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk1, bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk2, bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk2, rf_clk2_a, 5); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk1_pin, bb_clk1_a_pin, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk2_pin, bb_clk2_a_pin, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk1_pin, rf_clk1_a_pin, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk2_pin, rf_clk2_a_pin, 5); + +static struct clk_smd_rpm *msm8936_clks[] = { + [RPM_SMD_PCNOC_CLK] = &msm8936_pcnoc_clk, + [RPM_SMD_PCNOC_A_CLK] = &msm8936_pcnoc_a_clk, + [RPM_SMD_SNOC_CLK] = &msm8936_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &msm8936_snoc_a_clk, + [RPM_SMD_BIMC_CLK] = &msm8936_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &msm8936_bimc_a_clk, + [RPM_SMD_SYSMMNOC_CLK] = &msm8936_sysmmnoc_clk, + [RPM_SMD_SYSMMNOC_A_CLK] = &msm8936_sysmmnoc_a_clk, + [RPM_SMD_QDSS_CLK] = &msm8936_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &msm8936_qdss_a_clk, + [RPM_SMD_BB_CLK1] = &msm8936_bb_clk1, + [RPM_SMD_BB_CLK1_A] = &msm8936_bb_clk1_a, + [RPM_SMD_BB_CLK2] = &msm8936_bb_clk2, + [RPM_SMD_BB_CLK2_A] = &msm8936_bb_clk2_a, + [RPM_SMD_RF_CLK1] = &msm8936_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &msm8936_rf_clk1_a, + [RPM_SMD_RF_CLK2] = &msm8936_rf_clk2, + [RPM_SMD_RF_CLK2_A] = &msm8936_rf_clk2_a, + [RPM_SMD_BB_CLK1_PIN] = &msm8936_bb_clk1_pin, + [RPM_SMD_BB_CLK1_A_PIN] = &msm8936_bb_clk1_a_pin, + [RPM_SMD_BB_CLK2_PIN] = &msm8936_bb_clk2_pin, + [RPM_SMD_BB_CLK2_A_PIN] = &msm8936_bb_clk2_a_pin, + [RPM_SMD_RF_CLK1_PIN] = &msm8936_rf_clk1_pin, + [RPM_SMD_RF_CLK1_A_PIN] = &msm8936_rf_clk1_a_pin, + [RPM_SMD_RF_CLK2_PIN] = &msm8936_rf_clk2_pin, + [RPM_SMD_RF_CLK2_A_PIN] = &msm8936_rf_clk2_a_pin, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8936 = { + .clks = msm8936_clks, + .num_clks = ARRAY_SIZE(msm8936_clks), +}; + /* msm8974 */ DEFINE_CLK_SMD_RPM(msm8974, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); DEFINE_CLK_SMD_RPM(msm8974, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); @@ -574,6 +623,175 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8976 = { .num_clks = ARRAY_SIZE(msm8976_clks), }; +/* msm8992 */ +DEFINE_CLK_SMD_RPM(msm8992, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8992, ocmemgx_clk, ocmemgx_a_clk, QCOM_SMD_RPM_MEM_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8992, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8992, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8992, gfx3d_clk_src, gfx3d_a_clk_src, QCOM_SMD_RPM_MEM_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8992, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, bb_clk1, bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, bb_clk1_pin, bb_clk1_a_pin, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, bb_clk2, bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, bb_clk2_pin, bb_clk2_a_pin, 2); + +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk1, div_clk1_a, 11); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk2, div_clk2_a, 12); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, div_clk3, div_clk3_a, 13); +DEFINE_CLK_SMD_RPM(msm8992, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, ln_bb_clk, ln_bb_a_clk, 8); +DEFINE_CLK_SMD_RPM(msm8992, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk, + QCOM_SMD_RPM_BUS_CLK, 3); +DEFINE_CLK_SMD_RPM_QDSS(msm8992, qdss_clk, qdss_a_clk, + QCOM_SMD_RPM_MISC_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8992, rf_clk2, rf_clk2_a, 5); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, rf_clk1_pin, rf_clk1_a_pin, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8992, rf_clk2_pin, rf_clk2_a_pin, 5); + +DEFINE_CLK_SMD_RPM(msm8992, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8992, ce2_clk, ce2_a_clk, QCOM_SMD_RPM_CE_CLK, 1); + +static struct clk_smd_rpm *msm8992_clks[] = { + [RPM_SMD_PNOC_CLK] = &msm8992_pnoc_clk, + [RPM_SMD_PNOC_A_CLK] = &msm8992_pnoc_a_clk, + [RPM_SMD_OCMEMGX_CLK] = &msm8992_ocmemgx_clk, + [RPM_SMD_OCMEMGX_A_CLK] = &msm8992_ocmemgx_a_clk, + [RPM_SMD_BIMC_CLK] = &msm8992_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &msm8992_bimc_a_clk, + [RPM_SMD_CNOC_CLK] = &msm8992_cnoc_clk, + [RPM_SMD_CNOC_A_CLK] = &msm8992_cnoc_a_clk, + [RPM_SMD_GFX3D_CLK_SRC] = &msm8992_gfx3d_clk_src, + [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8992_gfx3d_a_clk_src, + [RPM_SMD_SNOC_CLK] = &msm8992_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &msm8992_snoc_a_clk, + [RPM_SMD_BB_CLK1] = &msm8992_bb_clk1, + [RPM_SMD_BB_CLK1_A] = &msm8992_bb_clk1_a, + [RPM_SMD_BB_CLK1_PIN] = &msm8992_bb_clk1_pin, + [RPM_SMD_BB_CLK1_A_PIN] = &msm8992_bb_clk1_a_pin, + [RPM_SMD_BB_CLK2] = &msm8992_bb_clk2, + [RPM_SMD_BB_CLK2_A] = &msm8992_bb_clk2_a, + [RPM_SMD_BB_CLK2_PIN] = &msm8992_bb_clk2_pin, + [RPM_SMD_BB_CLK2_A_PIN] = &msm8992_bb_clk2_a_pin, + [RPM_SMD_DIV_CLK1] = &msm8992_div_clk1, + [RPM_SMD_DIV_A_CLK1] = &msm8992_div_clk1_a, + [RPM_SMD_DIV_CLK2] = &msm8992_div_clk2, + [RPM_SMD_DIV_A_CLK2] = &msm8992_div_clk2_a, + [RPM_SMD_DIV_CLK3] = &msm8992_div_clk3, + [RPM_SMD_DIV_A_CLK3] = &msm8992_div_clk3_a, + [RPM_SMD_IPA_CLK] = &msm8992_ipa_clk, + [RPM_SMD_IPA_A_CLK] = &msm8992_ipa_a_clk, + [RPM_SMD_LN_BB_CLK] = &msm8992_ln_bb_clk, + [RPM_SMD_LN_BB_A_CLK] = &msm8992_ln_bb_a_clk, + [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8992_mmssnoc_ahb_clk, + [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8992_mmssnoc_ahb_a_clk, + [RPM_SMD_QDSS_CLK] = &msm8992_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &msm8992_qdss_a_clk, + [RPM_SMD_RF_CLK1] = &msm8992_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &msm8992_rf_clk1_a, + [RPM_SMD_RF_CLK2] = &msm8992_rf_clk2, + [RPM_SMD_RF_CLK2_A] = &msm8992_rf_clk2_a, + [RPM_SMD_RF_CLK1_PIN] = &msm8992_rf_clk1_pin, + [RPM_SMD_RF_CLK1_A_PIN] = &msm8992_rf_clk1_a_pin, + [RPM_SMD_RF_CLK2_PIN] = &msm8992_rf_clk2_pin, + [RPM_SMD_RF_CLK2_A_PIN] = &msm8992_rf_clk2_a_pin, + [RPM_SMD_CE1_CLK] = &msm8992_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &msm8992_ce1_a_clk, + [RPM_SMD_CE2_CLK] = &msm8992_ce2_clk, + [RPM_SMD_CE2_A_CLK] = &msm8992_ce2_a_clk, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8992 = { + .clks = msm8992_clks, + .num_clks = ARRAY_SIZE(msm8992_clks), +}; + +/* msm8994 */ +DEFINE_CLK_SMD_RPM(msm8994, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8994, ocmemgx_clk, ocmemgx_a_clk, QCOM_SMD_RPM_MEM_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8994, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8994, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM(msm8994, gfx3d_clk_src, gfx3d_a_clk_src, QCOM_SMD_RPM_MEM_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8994, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, bb_clk1, bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, bb_clk1_pin, bb_clk1_a_pin, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, bb_clk2, bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, bb_clk2_pin, bb_clk2_a_pin, 2); + +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk1, div_clk1_a, 11); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk2, div_clk2_a, 12); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, div_clk3, div_clk3_a, 13); +DEFINE_CLK_SMD_RPM(msm8994, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, ln_bb_clk, ln_bb_a_clk, 8); +DEFINE_CLK_SMD_RPM(msm8994, mmssnoc_ahb_clk, mmssnoc_ahb_a_clk, + QCOM_SMD_RPM_BUS_CLK, 3); +DEFINE_CLK_SMD_RPM_QDSS(msm8994, qdss_clk, qdss_a_clk, + QCOM_SMD_RPM_MISC_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8994, rf_clk2, rf_clk2_a, 5); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, rf_clk1_pin, rf_clk1_a_pin, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8994, rf_clk2_pin, rf_clk2_a_pin, 5); + +DEFINE_CLK_SMD_RPM(msm8994, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); +DEFINE_CLK_SMD_RPM(msm8994, ce2_clk, ce2_a_clk, QCOM_SMD_RPM_CE_CLK, 1); +DEFINE_CLK_SMD_RPM(msm8994, ce3_clk, ce3_a_clk, QCOM_SMD_RPM_CE_CLK, 2); + +static struct clk_smd_rpm *msm8994_clks[] = { + [RPM_SMD_PNOC_CLK] = &msm8994_pnoc_clk, + [RPM_SMD_PNOC_A_CLK] = &msm8994_pnoc_a_clk, + [RPM_SMD_OCMEMGX_CLK] = &msm8994_ocmemgx_clk, + [RPM_SMD_OCMEMGX_A_CLK] = &msm8994_ocmemgx_a_clk, + [RPM_SMD_BIMC_CLK] = &msm8994_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &msm8994_bimc_a_clk, + [RPM_SMD_CNOC_CLK] = &msm8994_cnoc_clk, + [RPM_SMD_CNOC_A_CLK] = &msm8994_cnoc_a_clk, + [RPM_SMD_GFX3D_CLK_SRC] = &msm8994_gfx3d_clk_src, + [RPM_SMD_GFX3D_A_CLK_SRC] = &msm8994_gfx3d_a_clk_src, + [RPM_SMD_SNOC_CLK] = &msm8994_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &msm8994_snoc_a_clk, + [RPM_SMD_BB_CLK1] = &msm8994_bb_clk1, + [RPM_SMD_BB_CLK1_A] = &msm8994_bb_clk1_a, + [RPM_SMD_BB_CLK1_PIN] = &msm8994_bb_clk1_pin, + [RPM_SMD_BB_CLK1_A_PIN] = &msm8994_bb_clk1_a_pin, + [RPM_SMD_BB_CLK2] = &msm8994_bb_clk2, + [RPM_SMD_BB_CLK2_A] = &msm8994_bb_clk2_a, + [RPM_SMD_BB_CLK2_PIN] = &msm8994_bb_clk2_pin, + [RPM_SMD_BB_CLK2_A_PIN] = &msm8994_bb_clk2_a_pin, + [RPM_SMD_DIV_CLK1] = &msm8994_div_clk1, + [RPM_SMD_DIV_A_CLK1] = &msm8994_div_clk1_a, + [RPM_SMD_DIV_CLK2] = &msm8994_div_clk2, + [RPM_SMD_DIV_A_CLK2] = &msm8994_div_clk2_a, + [RPM_SMD_DIV_CLK3] = &msm8994_div_clk3, + [RPM_SMD_DIV_A_CLK3] = &msm8994_div_clk3_a, + [RPM_SMD_IPA_CLK] = &msm8994_ipa_clk, + [RPM_SMD_IPA_A_CLK] = &msm8994_ipa_a_clk, + [RPM_SMD_LN_BB_CLK] = &msm8994_ln_bb_clk, + [RPM_SMD_LN_BB_A_CLK] = &msm8994_ln_bb_a_clk, + [RPM_SMD_MMSSNOC_AHB_CLK] = &msm8994_mmssnoc_ahb_clk, + [RPM_SMD_MMSSNOC_AHB_A_CLK] = &msm8994_mmssnoc_ahb_a_clk, + [RPM_SMD_QDSS_CLK] = &msm8994_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &msm8994_qdss_a_clk, + [RPM_SMD_RF_CLK1] = &msm8994_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &msm8994_rf_clk1_a, + [RPM_SMD_RF_CLK2] = &msm8994_rf_clk2, + [RPM_SMD_RF_CLK2_A] = &msm8994_rf_clk2_a, + [RPM_SMD_RF_CLK1_PIN] = &msm8994_rf_clk1_pin, + [RPM_SMD_RF_CLK1_A_PIN] = &msm8994_rf_clk1_a_pin, + [RPM_SMD_RF_CLK2_PIN] = &msm8994_rf_clk2_pin, + [RPM_SMD_RF_CLK2_A_PIN] = &msm8994_rf_clk2_a_pin, + [RPM_SMD_CE1_CLK] = &msm8994_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &msm8994_ce1_a_clk, + [RPM_SMD_CE2_CLK] = &msm8994_ce2_clk, + [RPM_SMD_CE2_A_CLK] = &msm8994_ce2_a_clk, + [RPM_SMD_CE3_CLK] = &msm8994_ce3_clk, + [RPM_SMD_CE3_A_CLK] = &msm8994_ce3_a_clk, +}; + +static const struct rpm_smd_clk_desc rpm_clk_msm8994 = { + .clks = msm8994_clks, + .num_clks = ARRAY_SIZE(msm8994_clks), +}; + /* msm8996 */ DEFINE_CLK_SMD_RPM(msm8996, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0); DEFINE_CLK_SMD_RPM(msm8996, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); @@ -766,13 +984,92 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8998 = { .num_clks = ARRAY_SIZE(msm8998_clks), }; +/* sdm660 */ +DEFINE_CLK_SMD_RPM_BRANCH(sdm660, bi_tcxo, bi_tcxo_a, QCOM_SMD_RPM_MISC_CLK, 0, + 19200000); +DEFINE_CLK_SMD_RPM(sdm660, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1); +DEFINE_CLK_SMD_RPM(sdm660, cnoc_clk, cnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2); +DEFINE_CLK_SMD_RPM(sdm660, cnoc_periph_clk, cnoc_periph_a_clk, + QCOM_SMD_RPM_BUS_CLK, 0); +DEFINE_CLK_SMD_RPM(sdm660, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0); +DEFINE_CLK_SMD_RPM(sdm660, mmssnoc_axi_clk, mmssnoc_axi_a_clk, + QCOM_SMD_RPM_MMAXI_CLK, 0); +DEFINE_CLK_SMD_RPM(sdm660, ipa_clk, ipa_a_clk, QCOM_SMD_RPM_IPA_CLK, 0); +DEFINE_CLK_SMD_RPM(sdm660, ce1_clk, ce1_a_clk, QCOM_SMD_RPM_CE_CLK, 0); +DEFINE_CLK_SMD_RPM(sdm660, aggre2_noc_clk, aggre2_noc_a_clk, + QCOM_SMD_RPM_AGGR_CLK, 2); +DEFINE_CLK_SMD_RPM_QDSS(sdm660, qdss_clk, qdss_a_clk, + QCOM_SMD_RPM_MISC_CLK, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, rf_clk1, rf_clk1_a, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, div_clk1, div_clk1_a, 11); +DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk1, ln_bb_clk1_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk2, ln_bb_clk2_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER(sdm660, ln_bb_clk3, ln_bb_clk3_a, 3); + +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, rf_clk1_pin, rf_clk1_a_pin, 4); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk1_pin, + ln_bb_clk1_pin_a, 1); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk2_pin, + ln_bb_clk2_pin_a, 2); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(sdm660, ln_bb_clk3_pin, + ln_bb_clk3_pin_a, 3); +static struct clk_smd_rpm *sdm660_clks[] = { + [RPM_SMD_XO_CLK_SRC] = &sdm660_bi_tcxo, + [RPM_SMD_XO_A_CLK_SRC] = &sdm660_bi_tcxo_a, + [RPM_SMD_SNOC_CLK] = &sdm660_snoc_clk, + [RPM_SMD_SNOC_A_CLK] = &sdm660_snoc_a_clk, + [RPM_SMD_CNOC_CLK] = &sdm660_cnoc_clk, + [RPM_SMD_CNOC_A_CLK] = &sdm660_cnoc_a_clk, + [RPM_SMD_CNOC_PERIPH_CLK] = &sdm660_cnoc_periph_clk, + [RPM_SMD_CNOC_PERIPH_A_CLK] = &sdm660_cnoc_periph_a_clk, + [RPM_SMD_BIMC_CLK] = &sdm660_bimc_clk, + [RPM_SMD_BIMC_A_CLK] = &sdm660_bimc_a_clk, + [RPM_SMD_MMSSNOC_AXI_CLK] = &sdm660_mmssnoc_axi_clk, + [RPM_SMD_MMSSNOC_AXI_CLK_A] = &sdm660_mmssnoc_axi_a_clk, + [RPM_SMD_IPA_CLK] = &sdm660_ipa_clk, + [RPM_SMD_IPA_A_CLK] = &sdm660_ipa_a_clk, + [RPM_SMD_CE1_CLK] = &sdm660_ce1_clk, + [RPM_SMD_CE1_A_CLK] = &sdm660_ce1_a_clk, + [RPM_SMD_AGGR2_NOC_CLK] = &sdm660_aggre2_noc_clk, + [RPM_SMD_AGGR2_NOC_A_CLK] = &sdm660_aggre2_noc_a_clk, + [RPM_SMD_QDSS_CLK] = &sdm660_qdss_clk, + [RPM_SMD_QDSS_A_CLK] = &sdm660_qdss_a_clk, + [RPM_SMD_RF_CLK1] = &sdm660_rf_clk1, + [RPM_SMD_RF_CLK1_A] = &sdm660_rf_clk1_a, + [RPM_SMD_DIV_CLK1] = &sdm660_div_clk1, + [RPM_SMD_DIV_A_CLK1] = &sdm660_div_clk1_a, + [RPM_SMD_LN_BB_CLK] = &sdm660_ln_bb_clk1, + [RPM_SMD_LN_BB_A_CLK] = &sdm660_ln_bb_clk1_a, + [RPM_SMD_LN_BB_CLK2] = &sdm660_ln_bb_clk2, + [RPM_SMD_LN_BB_CLK2_A] = &sdm660_ln_bb_clk2_a, + [RPM_SMD_LN_BB_CLK3] = &sdm660_ln_bb_clk3, + [RPM_SMD_LN_BB_CLK3_A] = &sdm660_ln_bb_clk3_a, + [RPM_SMD_RF_CLK1_PIN] = &sdm660_rf_clk1_pin, + [RPM_SMD_RF_CLK1_A_PIN] = &sdm660_rf_clk1_a_pin, + [RPM_SMD_LN_BB_CLK1_PIN] = &sdm660_ln_bb_clk1_pin, + [RPM_SMD_LN_BB_CLK1_A_PIN] = &sdm660_ln_bb_clk1_pin_a, + [RPM_SMD_LN_BB_CLK2_PIN] = &sdm660_ln_bb_clk2_pin, + [RPM_SMD_LN_BB_CLK2_A_PIN] = &sdm660_ln_bb_clk2_pin_a, + [RPM_SMD_LN_BB_CLK3_PIN] = &sdm660_ln_bb_clk3_pin, + [RPM_SMD_LN_BB_CLK3_A_PIN] = &sdm660_ln_bb_clk3_pin_a, +}; + +static const struct rpm_smd_clk_desc rpm_clk_sdm660 = { + .clks = sdm660_clks, + .num_clks = ARRAY_SIZE(sdm660_clks), +}; + static const struct of_device_id rpm_smd_clk_match_table[] = { { .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 }, + { .compatible = "qcom,rpmcc-msm8936", .data = &rpm_clk_msm8936 }, { .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 }, { .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 }, + { .compatible = "qcom,rpmcc-msm8992", .data = &rpm_clk_msm8992 }, + { .compatible = "qcom,rpmcc-msm8994", .data = &rpm_clk_msm8994 }, { .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 }, { .compatible = "qcom,rpmcc-msm8998", .data = &rpm_clk_msm8998 }, { .compatible = "qcom,rpmcc-qcs404", .data = &rpm_clk_qcs404 }, + { .compatible = "qcom,rpmcc-sdm660", .data = &rpm_clk_sdm660 }, { } }; MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table); diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c index a8456e09c44d..d6b7adb4be38 100644 --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c @@ -3089,7 +3089,7 @@ static int gcc_ipq806x_probe(struct platform_device *pdev) regmap_write(regmap, 0x3cf8, 8); regmap_write(regmap, 0x3d18, 8); - return 0; + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); } static struct platform_driver gcc_ipq806x_driver = { diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c index e01f5f591d1e..ef2c9c4cf9ab 100644 --- a/drivers/clk/qcom/gcc-ipq8074.c +++ b/drivers/clk/qcom/gcc-ipq8074.c @@ -4316,6 +4316,62 @@ static struct clk_branch gcc_gp3_clk = { }, }; +static const struct freq_tbl ftbl_pcie_rchng_clk_src[] = { + F(19200000, P_XO, 1, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + { } +}; + +struct clk_rcg2 pcie0_rchng_clk_src = { + .cmd_rcgr = 0x75070, + .freq_tbl = ftbl_pcie_rchng_clk_src, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcie0_rchng_clk_src", + .parent_hws = (const struct clk_hw *[]) { + &gpll0.clkr.hw }, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_pcie0_rchng_clk = { + .halt_reg = 0x75070, + .halt_bit = 31, + .clkr = { + .enable_reg = 0x75070, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_rchng_clk", + .parent_hws = (const struct clk_hw *[]){ + &pcie0_rchng_clk_src.clkr.hw, + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pcie0_axi_s_bridge_clk = { + .halt_reg = 0x75048, + .halt_bit = 31, + .clkr = { + .enable_reg = 0x75048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pcie0_axi_s_bridge_clk", + .parent_hws = (const struct clk_hw *[]){ + &pcie0_axi_clk_src.clkr.hw, + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + static struct clk_hw *gcc_ipq8074_hws[] = { &gpll0_out_main_div2.hw, &gpll6_out_main_div2.hw, @@ -4551,6 +4607,9 @@ static struct clk_regmap *gcc_ipq8074_clks[] = { [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr, + [GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr, + [GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr, }; static const struct qcom_reset_map gcc_ipq8074_resets[] = { @@ -4678,6 +4737,7 @@ static const struct qcom_reset_map gcc_ipq8074_resets[] = { [GCC_PCIE0_AXI_SLAVE_ARES] = { 0x75040, 4 }, [GCC_PCIE0_AHB_ARES] = { 0x75040, 5 }, [GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 }, + [GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 }, [GCC_PCIE1_PIPE_ARES] = { 0x76040, 0 }, [GCC_PCIE1_SLEEP_ARES] = { 0x76040, 1 }, [GCC_PCIE1_CORE_STICKY_ARES] = { 0x76040, 2 }, diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c index ca4383e3a02a..538677befb86 100644 --- a/drivers/clk/qcom/gcc-sc7180.c +++ b/drivers/clk/qcom/gcc-sc7180.c @@ -1061,7 +1061,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = { .hw = &gpll0.clkr.hw, }, .num_parents = 1, - .ops = &clk_branch2_ops, + .ops = &clk_branch2_aon_ops, }, }, }; diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c index f6ce888098be..90f7febaf528 100644 --- a/drivers/clk/qcom/gcc-sdm845.c +++ b/drivers/clk/qcom/gcc-sdm845.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved. */ #include <linux/kernel.h> @@ -1344,7 +1344,7 @@ static struct clk_branch gcc_disp_gpll0_clk_src = { "gpll0", }, .num_parents = 1, - .ops = &clk_branch2_ops, + .ops = &clk_branch2_aon_ops, }, }, }; diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig index 9eb79bf90643..28e8730ce263 100644 --- a/drivers/clk/renesas/Kconfig +++ b/drivers/clk/renesas/Kconfig @@ -15,6 +15,7 @@ config CLK_RENESAS select CLK_R8A774A1 if ARCH_R8A774A1 select CLK_R8A774B1 if ARCH_R8A774B1 select CLK_R8A774C0 if ARCH_R8A774C0 + select CLK_R8A774E1 if ARCH_R8A774E1 select CLK_R8A7778 if ARCH_R8A7778 select CLK_R8A7779 if ARCH_R8A7779 select CLK_R8A7790 if ARCH_R8A7790 @@ -84,6 +85,10 @@ config CLK_R8A774C0 bool "RZ/G2E clock support" if COMPILE_TEST select CLK_RCAR_GEN3_CPG +config CLK_R8A774E1 + bool "RZ/G2H clock support" if COMPILE_TEST + select CLK_RCAR_GEN3_CPG + config CLK_R8A7778 bool "R-Car M1A clock support" if COMPILE_TEST select CLK_RENESAS_CPG_MSTP diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile index a4066f9b34ef..c7c03ab9a6a3 100644 --- a/drivers/clk/renesas/Makefile +++ b/drivers/clk/renesas/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_CLK_R8A77470) += r8a77470-cpg-mssr.o obj-$(CONFIG_CLK_R8A774A1) += r8a774a1-cpg-mssr.o obj-$(CONFIG_CLK_R8A774B1) += r8a774b1-cpg-mssr.o obj-$(CONFIG_CLK_R8A774C0) += r8a774c0-cpg-mssr.o +obj-$(CONFIG_CLK_R8A774E1) += r8a774e1-cpg-mssr.o obj-$(CONFIG_CLK_R8A7778) += clk-r8a7778.o obj-$(CONFIG_CLK_R8A7779) += clk-r8a7779.o obj-$(CONFIG_CLK_R8A7790) += r8a7790-cpg-mssr.o diff --git a/drivers/clk/renesas/r8a774a1-cpg-mssr.c b/drivers/clk/renesas/r8a774a1-cpg-mssr.c index e05bfa200480..fd54b9f625da 100644 --- a/drivers/clk/renesas/r8a774a1-cpg-mssr.c +++ b/drivers/clk/renesas/r8a774a1-cpg-mssr.c @@ -237,6 +237,7 @@ static const struct mssr_mod_clk r8a774a1_mod_clks[] __initconst = { }; static const unsigned int r8a774a1_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; diff --git a/drivers/clk/renesas/r8a774b1-cpg-mssr.c b/drivers/clk/renesas/r8a774b1-cpg-mssr.c index c9af70917312..f436691271ec 100644 --- a/drivers/clk/renesas/r8a774b1-cpg-mssr.c +++ b/drivers/clk/renesas/r8a774b1-cpg-mssr.c @@ -233,6 +233,7 @@ static const struct mssr_mod_clk r8a774b1_mod_clks[] __initconst = { }; static const unsigned int r8a774b1_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; diff --git a/drivers/clk/renesas/r8a774c0-cpg-mssr.c b/drivers/clk/renesas/r8a774c0-cpg-mssr.c index f91e7a484753..9fc9fa9e531a 100644 --- a/drivers/clk/renesas/r8a774c0-cpg-mssr.c +++ b/drivers/clk/renesas/r8a774c0-cpg-mssr.c @@ -238,6 +238,7 @@ static const struct mssr_mod_clk r8a774c0_mod_clks[] __initconst = { }; static const unsigned int r8a774c0_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; diff --git a/drivers/clk/renesas/r8a774e1-cpg-mssr.c b/drivers/clk/renesas/r8a774e1-cpg-mssr.c new file mode 100644 index 000000000000..b96c486abb44 --- /dev/null +++ b/drivers/clk/renesas/r8a774e1-cpg-mssr.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * r8a774e1 Clock Pulse Generator / Module Standby and Software Reset + * + * Copyright (C) 2020 Renesas Electronics Corp. + * + * Based on r8a7795-cpg-mssr.c + * + * Copyright (C) 2015 Glider bvba + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/soc/renesas/rcar-rst.h> + +#include <dt-bindings/clock/r8a774e1-cpg-mssr.h> + +#include "renesas-cpg-mssr.h" +#include "rcar-gen3-cpg.h" + +enum clk_ids { + /* Core Clock Outputs exported to DT */ + LAST_DT_CORE_CLK = R8A774E1_CLK_CANFD, + + /* External Input Clocks */ + CLK_EXTAL, + CLK_EXTALR, + + /* Internal Core Clocks */ + CLK_MAIN, + CLK_PLL0, + CLK_PLL1, + CLK_PLL2, + CLK_PLL3, + CLK_PLL4, + CLK_PLL1_DIV2, + CLK_PLL1_DIV4, + CLK_S0, + CLK_S1, + CLK_S2, + CLK_S3, + CLK_SDSRC, + CLK_RPCSRC, + CLK_RINT, + + /* Module Clocks */ + MOD_CLK_BASE +}; + +static const struct cpg_core_clk r8a774e1_core_clks[] __initconst = { + /* External Clock Inputs */ + DEF_INPUT("extal", CLK_EXTAL), + DEF_INPUT("extalr", CLK_EXTALR), + + /* Internal Core Clocks */ + DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN3_MAIN, CLK_EXTAL), + DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN3_PLL0, CLK_MAIN), + DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN3_PLL1, CLK_MAIN), + DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN3_PLL2, CLK_MAIN), + DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN3_PLL3, CLK_MAIN), + DEF_BASE(".pll4", CLK_PLL4, CLK_TYPE_GEN3_PLL4, CLK_MAIN), + + DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1), + DEF_FIXED(".pll1_div4", CLK_PLL1_DIV4, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED(".s0", CLK_S0, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED(".s1", CLK_S1, CLK_PLL1_DIV2, 3, 1), + DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED(".s3", CLK_S3, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED(".sdsrc", CLK_SDSRC, CLK_PLL1_DIV2, 2, 1), + DEF_BASE(".rpcsrc", CLK_RPCSRC, CLK_TYPE_GEN3_RPCSRC, CLK_PLL1), + + DEF_BASE("rpc", R8A774E1_CLK_RPC, CLK_TYPE_GEN3_RPC, + CLK_RPCSRC), + DEF_BASE("rpcd2", R8A774E1_CLK_RPCD2, CLK_TYPE_GEN3_RPCD2, + R8A774E1_CLK_RPC), + + DEF_GEN3_OSC(".r", CLK_RINT, CLK_EXTAL, 32), + + /* Core Clock Outputs */ + DEF_GEN3_Z("z", R8A774E1_CLK_Z, CLK_TYPE_GEN3_Z, CLK_PLL0, 2, 8), + DEF_GEN3_Z("z2", R8A774E1_CLK_Z2, CLK_TYPE_GEN3_Z, CLK_PLL2, 2, 0), + DEF_FIXED("ztr", R8A774E1_CLK_ZTR, CLK_PLL1_DIV2, 6, 1), + DEF_FIXED("ztrd2", R8A774E1_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1), + DEF_FIXED("zt", R8A774E1_CLK_ZT, CLK_PLL1_DIV2, 4, 1), + DEF_FIXED("zx", R8A774E1_CLK_ZX, CLK_PLL1_DIV2, 2, 1), + DEF_FIXED("s0d1", R8A774E1_CLK_S0D1, CLK_S0, 1, 1), + DEF_FIXED("s0d2", R8A774E1_CLK_S0D2, CLK_S0, 2, 1), + DEF_FIXED("s0d3", R8A774E1_CLK_S0D3, CLK_S0, 3, 1), + DEF_FIXED("s0d4", R8A774E1_CLK_S0D4, CLK_S0, 4, 1), + DEF_FIXED("s0d6", R8A774E1_CLK_S0D6, CLK_S0, 6, 1), + DEF_FIXED("s0d8", R8A774E1_CLK_S0D8, CLK_S0, 8, 1), + DEF_FIXED("s0d12", R8A774E1_CLK_S0D12, CLK_S0, 12, 1), + DEF_FIXED("s1d2", R8A774E1_CLK_S1D2, CLK_S1, 2, 1), + DEF_FIXED("s1d4", R8A774E1_CLK_S1D4, CLK_S1, 4, 1), + DEF_FIXED("s2d1", R8A774E1_CLK_S2D1, CLK_S2, 1, 1), + DEF_FIXED("s2d2", R8A774E1_CLK_S2D2, CLK_S2, 2, 1), + DEF_FIXED("s2d4", R8A774E1_CLK_S2D4, CLK_S2, 4, 1), + DEF_FIXED("s3d1", R8A774E1_CLK_S3D1, CLK_S3, 1, 1), + DEF_FIXED("s3d2", R8A774E1_CLK_S3D2, CLK_S3, 2, 1), + DEF_FIXED("s3d4", R8A774E1_CLK_S3D4, CLK_S3, 4, 1), + + DEF_GEN3_SD("sd0", R8A774E1_CLK_SD0, CLK_SDSRC, 0x074), + DEF_GEN3_SD("sd1", R8A774E1_CLK_SD1, CLK_SDSRC, 0x078), + DEF_GEN3_SD("sd2", R8A774E1_CLK_SD2, CLK_SDSRC, 0x268), + DEF_GEN3_SD("sd3", R8A774E1_CLK_SD3, CLK_SDSRC, 0x26c), + + DEF_FIXED("cl", R8A774E1_CLK_CL, CLK_PLL1_DIV2, 48, 1), + DEF_FIXED("cr", R8A774E1_CLK_CR, CLK_PLL1_DIV4, 2, 1), + DEF_FIXED("cp", R8A774E1_CLK_CP, CLK_EXTAL, 2, 1), + DEF_FIXED("cpex", R8A774E1_CLK_CPEX, CLK_EXTAL, 2, 1), + + DEF_DIV6P1("canfd", R8A774E1_CLK_CANFD, CLK_PLL1_DIV4, 0x244), + DEF_DIV6P1("csi0", R8A774E1_CLK_CSI0, CLK_PLL1_DIV4, 0x00c), + DEF_DIV6P1("mso", R8A774E1_CLK_MSO, CLK_PLL1_DIV4, 0x014), + DEF_DIV6P1("hdmi", R8A774E1_CLK_HDMI, CLK_PLL1_DIV4, 0x250), + + DEF_GEN3_OSC("osc", R8A774E1_CLK_OSC, CLK_EXTAL, 8), + + DEF_BASE("r", R8A774E1_CLK_R, CLK_TYPE_GEN3_R, CLK_RINT), +}; + +static const struct mssr_mod_clk r8a774e1_mod_clks[] __initconst = { + DEF_MOD("fdp1-1", 118, R8A774E1_CLK_S0D1), + DEF_MOD("fdp1-0", 119, R8A774E1_CLK_S0D1), + DEF_MOD("tmu4", 121, R8A774E1_CLK_S0D6), + DEF_MOD("tmu3", 122, R8A774E1_CLK_S3D2), + DEF_MOD("tmu2", 123, R8A774E1_CLK_S3D2), + DEF_MOD("tmu1", 124, R8A774E1_CLK_S3D2), + DEF_MOD("tmu0", 125, R8A774E1_CLK_CP), + DEF_MOD("vcplf", 130, R8A774E1_CLK_S2D1), + DEF_MOD("vdpb", 131, R8A774E1_CLK_S2D1), + DEF_MOD("scif5", 202, R8A774E1_CLK_S3D4), + DEF_MOD("scif4", 203, R8A774E1_CLK_S3D4), + DEF_MOD("scif3", 204, R8A774E1_CLK_S3D4), + DEF_MOD("scif1", 206, R8A774E1_CLK_S3D4), + DEF_MOD("scif0", 207, R8A774E1_CLK_S3D4), + DEF_MOD("msiof3", 208, R8A774E1_CLK_MSO), + DEF_MOD("msiof2", 209, R8A774E1_CLK_MSO), + DEF_MOD("msiof1", 210, R8A774E1_CLK_MSO), + DEF_MOD("msiof0", 211, R8A774E1_CLK_MSO), + DEF_MOD("sys-dmac2", 217, R8A774E1_CLK_S3D1), + DEF_MOD("sys-dmac1", 218, R8A774E1_CLK_S3D1), + DEF_MOD("sys-dmac0", 219, R8A774E1_CLK_S0D3), + DEF_MOD("cmt3", 300, R8A774E1_CLK_R), + DEF_MOD("cmt2", 301, R8A774E1_CLK_R), + DEF_MOD("cmt1", 302, R8A774E1_CLK_R), + DEF_MOD("cmt0", 303, R8A774E1_CLK_R), + DEF_MOD("tpu0", 304, R8A774E1_CLK_S3D4), + DEF_MOD("scif2", 310, R8A774E1_CLK_S3D4), + DEF_MOD("sdif3", 311, R8A774E1_CLK_SD3), + DEF_MOD("sdif2", 312, R8A774E1_CLK_SD2), + DEF_MOD("sdif1", 313, R8A774E1_CLK_SD1), + DEF_MOD("sdif0", 314, R8A774E1_CLK_SD0), + DEF_MOD("pcie1", 318, R8A774E1_CLK_S3D1), + DEF_MOD("pcie0", 319, R8A774E1_CLK_S3D1), + DEF_MOD("usb3-if0", 328, R8A774E1_CLK_S3D1), + DEF_MOD("usb-dmac0", 330, R8A774E1_CLK_S3D1), + DEF_MOD("usb-dmac1", 331, R8A774E1_CLK_S3D1), + DEF_MOD("rwdt", 402, R8A774E1_CLK_R), + DEF_MOD("intc-ex", 407, R8A774E1_CLK_CP), + DEF_MOD("intc-ap", 408, R8A774E1_CLK_S0D3), + DEF_MOD("audmac1", 501, R8A774E1_CLK_S1D2), + DEF_MOD("audmac0", 502, R8A774E1_CLK_S1D2), + DEF_MOD("hscif4", 516, R8A774E1_CLK_S3D1), + DEF_MOD("hscif3", 517, R8A774E1_CLK_S3D1), + DEF_MOD("hscif2", 518, R8A774E1_CLK_S3D1), + DEF_MOD("hscif1", 519, R8A774E1_CLK_S3D1), + DEF_MOD("hscif0", 520, R8A774E1_CLK_S3D1), + DEF_MOD("thermal", 522, R8A774E1_CLK_CP), + DEF_MOD("pwm", 523, R8A774E1_CLK_S0D12), + DEF_MOD("fcpvd1", 602, R8A774E1_CLK_S0D2), + DEF_MOD("fcpvd0", 603, R8A774E1_CLK_S0D2), + DEF_MOD("fcpvb1", 606, R8A774E1_CLK_S0D1), + DEF_MOD("fcpvb0", 607, R8A774E1_CLK_S0D1), + DEF_MOD("fcpvi1", 610, R8A774E1_CLK_S0D1), + DEF_MOD("fcpvi0", 611, R8A774E1_CLK_S0D1), + DEF_MOD("fcpf1", 614, R8A774E1_CLK_S0D1), + DEF_MOD("fcpf0", 615, R8A774E1_CLK_S0D1), + DEF_MOD("fcpcs", 619, R8A774E1_CLK_S0D1), + DEF_MOD("vspd1", 622, R8A774E1_CLK_S0D2), + DEF_MOD("vspd0", 623, R8A774E1_CLK_S0D2), + DEF_MOD("vspbc", 624, R8A774E1_CLK_S0D1), + DEF_MOD("vspbd", 626, R8A774E1_CLK_S0D1), + DEF_MOD("vspi1", 630, R8A774E1_CLK_S0D1), + DEF_MOD("vspi0", 631, R8A774E1_CLK_S0D1), + DEF_MOD("ehci1", 702, R8A774E1_CLK_S3D2), + DEF_MOD("ehci0", 703, R8A774E1_CLK_S3D2), + DEF_MOD("hsusb", 704, R8A774E1_CLK_S3D2), + DEF_MOD("csi20", 714, R8A774E1_CLK_CSI0), + DEF_MOD("csi40", 716, R8A774E1_CLK_CSI0), + DEF_MOD("du3", 721, R8A774E1_CLK_S2D1), + DEF_MOD("du1", 723, R8A774E1_CLK_S2D1), + DEF_MOD("du0", 724, R8A774E1_CLK_S2D1), + DEF_MOD("lvds", 727, R8A774E1_CLK_S0D4), + DEF_MOD("hdmi0", 729, R8A774E1_CLK_HDMI), + DEF_MOD("vin7", 804, R8A774E1_CLK_S0D2), + DEF_MOD("vin6", 805, R8A774E1_CLK_S0D2), + DEF_MOD("vin5", 806, R8A774E1_CLK_S0D2), + DEF_MOD("vin4", 807, R8A774E1_CLK_S0D2), + DEF_MOD("vin3", 808, R8A774E1_CLK_S0D2), + DEF_MOD("vin2", 809, R8A774E1_CLK_S0D2), + DEF_MOD("vin1", 810, R8A774E1_CLK_S0D2), + DEF_MOD("vin0", 811, R8A774E1_CLK_S0D2), + DEF_MOD("etheravb", 812, R8A774E1_CLK_S0D6), + DEF_MOD("sata0", 815, R8A774E1_CLK_S3D2), + DEF_MOD("gpio7", 905, R8A774E1_CLK_S3D4), + DEF_MOD("gpio6", 906, R8A774E1_CLK_S3D4), + DEF_MOD("gpio5", 907, R8A774E1_CLK_S3D4), + DEF_MOD("gpio4", 908, R8A774E1_CLK_S3D4), + DEF_MOD("gpio3", 909, R8A774E1_CLK_S3D4), + DEF_MOD("gpio2", 910, R8A774E1_CLK_S3D4), + DEF_MOD("gpio1", 911, R8A774E1_CLK_S3D4), + DEF_MOD("gpio0", 912, R8A774E1_CLK_S3D4), + DEF_MOD("can-fd", 914, R8A774E1_CLK_S3D2), + DEF_MOD("can-if1", 915, R8A774E1_CLK_S3D4), + DEF_MOD("can-if0", 916, R8A774E1_CLK_S3D4), + DEF_MOD("rpc-if", 917, R8A774E1_CLK_RPCD2), + DEF_MOD("i2c6", 918, R8A774E1_CLK_S0D6), + DEF_MOD("i2c5", 919, R8A774E1_CLK_S0D6), + DEF_MOD("adg", 922, R8A774E1_CLK_S0D1), + DEF_MOD("i2c-dvfs", 926, R8A774E1_CLK_CP), + DEF_MOD("i2c4", 927, R8A774E1_CLK_S0D6), + DEF_MOD("i2c3", 928, R8A774E1_CLK_S0D6), + DEF_MOD("i2c2", 929, R8A774E1_CLK_S3D2), + DEF_MOD("i2c1", 930, R8A774E1_CLK_S3D2), + DEF_MOD("i2c0", 931, R8A774E1_CLK_S3D2), + DEF_MOD("ssi-all", 1005, R8A774E1_CLK_S3D4), + DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)), + DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)), + DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)), + DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)), + DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)), + DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)), + DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)), + DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)), + DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)), + DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)), + DEF_MOD("scu-all", 1017, R8A774E1_CLK_S3D4), + DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)), + DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)), + DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)), + DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)), + DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)), + DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)), + DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)), + DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)), + DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)), + DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)), + DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)), + DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)), + DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)), +}; + +static const unsigned int r8a774e1_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ + MOD_CLK_ID(408), /* INTC-AP (GIC) */ +}; + +/* + * CPG Clock Data + */ + +/* + * MD EXTAL PLL0 PLL1 PLL2 PLL3 PLL4 OSC + * 14 13 19 17 (MHz) + *------------------------------------------------------------------------- + * 0 0 0 0 16.66 x 1 x180 x192 x144 x192 x144 /16 + * 0 0 0 1 16.66 x 1 x180 x192 x144 x128 x144 /16 + * 0 0 1 0 Prohibited setting + * 0 0 1 1 16.66 x 1 x180 x192 x144 x192 x144 /16 + * 0 1 0 0 20 x 1 x150 x160 x120 x160 x120 /19 + * 0 1 0 1 20 x 1 x150 x160 x120 x106 x120 /19 + * 0 1 1 0 Prohibited setting + * 0 1 1 1 20 x 1 x150 x160 x120 x160 x120 /19 + * 1 0 0 0 25 x 1 x120 x128 x96 x128 x96 /24 + * 1 0 0 1 25 x 1 x120 x128 x96 x84 x96 /24 + * 1 0 1 0 Prohibited setting + * 1 0 1 1 25 x 1 x120 x128 x96 x128 x96 /24 + * 1 1 0 0 33.33 / 2 x180 x192 x144 x192 x144 /32 + * 1 1 0 1 33.33 / 2 x180 x192 x144 x128 x144 /32 + * 1 1 1 0 Prohibited setting + * 1 1 1 1 33.33 / 2 x180 x192 x144 x192 x144 /32 + */ +#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 11) | \ + (((md) & BIT(13)) >> 11) | \ + (((md) & BIT(19)) >> 18) | \ + (((md) & BIT(17)) >> 17)) + +static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[16] __initconst = { + /* EXTAL div PLL1 mult/div PLL3 mult/div OSC prediv */ + { 1, 192, 1, 192, 1, 16, }, + { 1, 192, 1, 128, 1, 16, }, + { 0, /* Prohibited setting */ }, + { 1, 192, 1, 192, 1, 16, }, + { 1, 160, 1, 160, 1, 19, }, + { 1, 160, 1, 106, 1, 19, }, + { 0, /* Prohibited setting */ }, + { 1, 160, 1, 160, 1, 19, }, + { 1, 128, 1, 128, 1, 24, }, + { 1, 128, 1, 84, 1, 24, }, + { 0, /* Prohibited setting */ }, + { 1, 128, 1, 128, 1, 24, }, + { 2, 192, 1, 192, 1, 32, }, + { 2, 192, 1, 128, 1, 32, }, + { 0, /* Prohibited setting */ }, + { 2, 192, 1, 192, 1, 32, }, +}; + +static int __init r8a774e1_cpg_mssr_init(struct device *dev) +{ + const struct rcar_gen3_cpg_pll_config *cpg_pll_config; + u32 cpg_mode; + int error; + + error = rcar_rst_read_mode_pins(&cpg_mode); + if (error) + return error; + + cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)]; + if (!cpg_pll_config->extal_div) { + dev_err(dev, "Prohibited setting (cpg_mode=0x%x)\n", cpg_mode); + return -EINVAL; + } + + return rcar_gen3_cpg_init(cpg_pll_config, CLK_EXTALR, cpg_mode); +} + +const struct cpg_mssr_info r8a774e1_cpg_mssr_info __initconst = { + /* Core Clocks */ + .core_clks = r8a774e1_core_clks, + .num_core_clks = ARRAY_SIZE(r8a774e1_core_clks), + .last_dt_core_clk = LAST_DT_CORE_CLK, + .num_total_core_clks = MOD_CLK_BASE, + + /* Module Clocks */ + .mod_clks = r8a774e1_mod_clks, + .num_mod_clks = ARRAY_SIZE(r8a774e1_mod_clks), + .num_hw_mod_clks = 12 * 32, + + /* Critical Module Clocks */ + .crit_mod_clks = r8a774e1_crit_mod_clks, + .num_crit_mod_clks = ARRAY_SIZE(r8a774e1_crit_mod_clks), + + /* Callbacks */ + .init = r8a774e1_cpg_mssr_init, + .cpg_clk_register = rcar_gen3_cpg_clk_register, +}; diff --git a/drivers/clk/renesas/r8a7795-cpg-mssr.c b/drivers/clk/renesas/r8a7795-cpg-mssr.c index ff5b3020cb03..068018ae3c6e 100644 --- a/drivers/clk/renesas/r8a7795-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7795-cpg-mssr.c @@ -287,10 +287,10 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = { }; static const unsigned int r8a7795_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; - /* * CPG Clock Data */ diff --git a/drivers/clk/renesas/r8a7796-cpg-mssr.c b/drivers/clk/renesas/r8a7796-cpg-mssr.c index e8d466dbc7f9..2cd6e3876fbd 100644 --- a/drivers/clk/renesas/r8a7796-cpg-mssr.c +++ b/drivers/clk/renesas/r8a7796-cpg-mssr.c @@ -262,10 +262,10 @@ static struct mssr_mod_clk r8a7796_mod_clks[] __initdata = { }; static const unsigned int r8a7796_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; - /* * CPG Clock Data */ diff --git a/drivers/clk/renesas/r8a77965-cpg-mssr.c b/drivers/clk/renesas/r8a77965-cpg-mssr.c index 7a05a2fc1cc6..2b55a06ac5cf 100644 --- a/drivers/clk/renesas/r8a77965-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c @@ -263,6 +263,7 @@ static const struct mssr_mod_clk r8a77965_mod_clks[] __initconst = { }; static const unsigned int r8a77965_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; diff --git a/drivers/clk/renesas/r8a77970-cpg-mssr.c b/drivers/clk/renesas/r8a77970-cpg-mssr.c index cbed3769a100..0f59c84229a8 100644 --- a/drivers/clk/renesas/r8a77970-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77970-cpg-mssr.c @@ -165,10 +165,10 @@ static const struct mssr_mod_clk r8a77970_mod_clks[] __initconst = { }; static const unsigned int r8a77970_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; - /* * CPG Clock Data */ diff --git a/drivers/clk/renesas/r8a77980-cpg-mssr.c b/drivers/clk/renesas/r8a77980-cpg-mssr.c index 7227f675e61f..9fe372286c1e 100644 --- a/drivers/clk/renesas/r8a77980-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77980-cpg-mssr.c @@ -180,10 +180,10 @@ static const struct mssr_mod_clk r8a77980_mod_clks[] __initconst = { }; static const unsigned int r8a77980_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; - /* * CPG Clock Data */ diff --git a/drivers/clk/renesas/r8a77990-cpg-mssr.c b/drivers/clk/renesas/r8a77990-cpg-mssr.c index 8eda2e3e2480..2b97ab61d044 100644 --- a/drivers/clk/renesas/r8a77990-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77990-cpg-mssr.c @@ -245,6 +245,7 @@ static const struct mssr_mod_clk r8a77990_mod_clks[] __initconst = { }; static const unsigned int r8a77990_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; diff --git a/drivers/clk/renesas/r8a77995-cpg-mssr.c b/drivers/clk/renesas/r8a77995-cpg-mssr.c index 056ebf3e70e2..5b4691117b47 100644 --- a/drivers/clk/renesas/r8a77995-cpg-mssr.c +++ b/drivers/clk/renesas/r8a77995-cpg-mssr.c @@ -183,10 +183,10 @@ static const struct mssr_mod_clk r8a77995_mod_clks[] __initconst = { }; static const unsigned int r8a77995_crit_mod_clks[] __initconst = { + MOD_CLK_ID(402), /* RWDT */ MOD_CLK_ID(408), /* INTC-AP (GIC) */ }; - /* * CPG Clock Data */ diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index dcb6e2706d37..5a306d28738c 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -416,14 +416,6 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod, init.name = mod->name; init.ops = &cpg_mstp_clock_ops; init.flags = CLK_SET_RATE_PARENT; - for (i = 0; i < info->num_crit_mod_clks; i++) - if (id == info->crit_mod_clks[i]) { - dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n", - mod->name); - init.flags |= CLK_IS_CRITICAL; - break; - } - parent_name = __clk_get_name(parent); init.parent_names = &parent_name; init.num_parents = 1; @@ -432,6 +424,15 @@ static void __init cpg_mssr_register_mod_clk(const struct mssr_mod_clk *mod, clock->priv = priv; clock->hw.init = &init; + for (i = 0; i < info->num_crit_mod_clks; i++) + if (id == info->crit_mod_clks[i] && + cpg_mstp_clock_is_enabled(&clock->hw)) { + dev_dbg(dev, "MSTP %s setting CLK_IS_CRITICAL\n", + mod->name); + init.flags |= CLK_IS_CRITICAL; + break; + } + clk = clk_register(NULL, &clock->hw); if (IS_ERR(clk)) goto fail; @@ -720,6 +721,12 @@ static const struct of_device_id cpg_mssr_match[] = { .data = &r8a774c0_cpg_mssr_info, }, #endif +#ifdef CONFIG_CLK_R8A774E1 + { + .compatible = "renesas,r8a774e1-cpg-mssr", + .data = &r8a774e1_cpg_mssr_info, + }, +#endif #ifdef CONFIG_CLK_R8A7790 { .compatible = "renesas,r8a7790-cpg-mssr", diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h index 55a18ef0efaf..1cc569484250 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.h +++ b/drivers/clk/renesas/renesas-cpg-mssr.h @@ -162,6 +162,7 @@ extern const struct cpg_mssr_info r8a77470_cpg_mssr_info; extern const struct cpg_mssr_info r8a774a1_cpg_mssr_info; extern const struct cpg_mssr_info r8a774b1_cpg_mssr_info; extern const struct cpg_mssr_info r8a774c0_cpg_mssr_info; +extern const struct cpg_mssr_info r8a774e1_cpg_mssr_info; extern const struct cpg_mssr_info r8a7790_cpg_mssr_info; extern const struct cpg_mssr_info r8a7791_cpg_mssr_info; extern const struct cpg_mssr_info r8a7792_cpg_mssr_info; diff --git a/drivers/clk/socfpga/clk-agilex.c b/drivers/clk/socfpga/clk-agilex.c index 699527f7e764..8fb12cbe0208 100644 --- a/drivers/clk/socfpga/clk-agilex.c +++ b/drivers/clk/socfpga/clk-agilex.c @@ -252,7 +252,7 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 0, 0, 0, 0, 0x30, 0, 0}, { AGILEX_MPU_PERIPH_CLK, "mpu_periph_clk", "mpu_clk", NULL, 1, 0, 0x24, 0, 0, 0, 0, 0, 0, 4}, - { AGILEX_MPU_L2RAM_CLK, "mpu_l2ram_clk", "mpu_clk", NULL, 1, 0, 0x24, + { AGILEX_MPU_CCU_CLK, "mpu_ccu_clk", "mpu_clk", NULL, 1, 0, 0x24, 0, 0, 0, 0, 0, 0, 2}, { AGILEX_L4_MAIN_CLK, "l4_main_clk", "noc_clk", NULL, 1, 0, 0x24, 1, 0x44, 0, 2, 0, 0, 0}, @@ -294,8 +294,12 @@ static const struct stratix10_gate_clock agilex_gate_clks[] = { 8, 0, 0, 0, 0, 0, 0}, { AGILEX_SPI_M_CLK, "spi_m_clk", "l4_mp_clk", NULL, 1, 0, 0x7C, 9, 0, 0, 0, 0, 0, 0}, - { AGILEX_NAND_CLK, "nand_clk", "l4_main_clk", NULL, 1, 0, 0x7C, + { AGILEX_NAND_X_CLK, "nand_x_clk", "l4_mp_clk", NULL, 1, 0, 0x7C, 10, 0, 0, 0, 0, 0, 0}, + { AGILEX_NAND_CLK, "nand_clk", "nand_x_clk", NULL, 1, 0, 0x7C, + 10, 0, 0, 0, 0, 0, 4}, + { AGILEX_NAND_ECC_CLK, "nand_ecc_clk", "nand_x_clk", NULL, 1, 0, 0x7C, + 10, 0, 0, 0, 0, 0, 4}, }; static int agilex_clk_register_c_perip(const struct stratix10_perip_c_clock *clks, diff --git a/drivers/clk/versatile/icst.c b/drivers/clk/versatile/icst.c index ba4b2d22ec97..307cb3774f87 100644 --- a/drivers/clk/versatile/icst.c +++ b/drivers/clk/versatile/icst.c @@ -5,7 +5,7 @@ * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * * Support functions for calculating clocks/divisors for the ICST307 - * clock generators. See http://www.idt.com/ for more information + * clock generators. See https://www.idt.com/ for more information * on these devices. * * This is an almost identical implementation to the ICST525 clock generator. diff --git a/drivers/clk/versatile/icst.h b/drivers/clk/versatile/icst.h index 73a3062b4535..29622768b02a 100644 --- a/drivers/clk/versatile/icst.h +++ b/drivers/clk/versatile/icst.h @@ -3,7 +3,7 @@ * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * * Support functions for calculating clocks/divisors for the ICST - * clock generators. See http://www.idt.com/ for more information + * clock generators. See https://www.idt.com/ for more information * on these devices. */ #ifndef ICST_H diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 625c8fdceabf..8f2fb4c562da 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -211,6 +211,20 @@ rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw) static void rpi_register_clk_driver(struct device *dev) { + struct device_node *firmware; + + /* + * Earlier DTs don't have a node for the firmware clocks but + * rely on us creating a platform device by hand. If we do + * have a node for the firmware clocks, just bail out here. + */ + firmware = of_get_compatible_child(dev->of_node, + "raspberrypi,firmware-clocks"); + if (firmware) { + of_node_put(firmware); + return; + } + rpi_clk = platform_device_register_data(dev, "raspberrypi-clk", -1, NULL, 0); } diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index a9261cf48293..7305d57d1890 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -82,6 +82,7 @@ config FSL_IMX8_DDR_PMU config QCOM_L2_PMU bool "Qualcomm Technologies L2-cache PMU" depends on ARCH_QCOM && ARM64 && ACPI + select QCOM_KRYO_L2_ACCESSORS help Provides support for the L2 cache performance monitor unit (PMU) in Qualcomm Technologies processors. diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 4da37f650f98..23a0e008dafa 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -23,6 +23,7 @@ #include <asm/barrier.h> #include <asm/local64.h> #include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> #define MAX_L2_CTRS 9 @@ -79,8 +80,6 @@ #define L2_COUNTER_RELOAD BIT_ULL(31) #define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63) -#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) -#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) #define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE) @@ -99,48 +98,7 @@ #define L2_EVENT_STREX 0x421 #define L2_EVENT_CLREX 0x422 -static DEFINE_RAW_SPINLOCK(l2_access_lock); -/** - * set_l2_indirect_reg: write value to an L2 register - * @reg: Address of L2 register. - * @value: Value to be written to register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static void set_l2_indirect_reg(u64 reg, u64 val) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - write_sysreg_s(val, L2CPUSRDR_EL1); - isb(); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); -} - -/** - * get_l2_indirect_reg: read an L2 register value - * @reg: Address of L2 register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static u64 get_l2_indirect_reg(u64 reg) -{ - u64 val; - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - val = read_sysreg_s(L2CPUSRDR_EL1); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); - - return val; -} struct cluster_pmu; @@ -211,28 +169,28 @@ static inline struct cluster_pmu *get_cluster_pmu( static void cluster_pmu_reset(void) { /* Reset all counters */ - set_l2_indirect_reg(L2PMCR, L2PMCR_RESET_ALL); - set_l2_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask); - set_l2_indirect_reg(L2PMINTENCLR, l2_counter_present_mask); - set_l2_indirect_reg(L2PMOVSCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_RESET_ALL); + kryo_l2_set_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMINTENCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMOVSCLR, l2_counter_present_mask); } static inline void cluster_pmu_enable(void) { - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE); } static inline void cluster_pmu_disable(void) { - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE); } static inline void cluster_pmu_counter_set_value(u32 idx, u64 value) { if (idx == l2_cycle_ctr_idx) - set_l2_indirect_reg(L2PMCCNTR, value); + kryo_l2_set_indirect_reg(L2PMCCNTR, value); else - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value); } static inline u64 cluster_pmu_counter_get_value(u32 idx) @@ -240,46 +198,46 @@ static inline u64 cluster_pmu_counter_get_value(u32 idx) u64 value; if (idx == l2_cycle_ctr_idx) - value = get_l2_indirect_reg(L2PMCCNTR); + value = kryo_l2_get_indirect_reg(L2PMCCNTR); else - value = get_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx)); + value = kryo_l2_get_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx)); return value; } static inline void cluster_pmu_counter_enable(u32 idx) { - set_l2_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_disable(u32 idx) { - set_l2_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_enable_interrupt(u32 idx) { - set_l2_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_disable_interrupt(u32 idx) { - set_l2_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx)); } static inline void cluster_pmu_set_evccntcr(u32 val) { - set_l2_indirect_reg(L2PMCCNTCR, val); + kryo_l2_set_indirect_reg(L2PMCCNTCR, val); } static inline void cluster_pmu_set_evcntcr(u32 ctr, u32 val) { - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val); } static inline void cluster_pmu_set_evtyper(u32 ctr, u32 val) { - set_l2_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val); } static void cluster_pmu_set_resr(struct cluster_pmu *cluster, @@ -295,11 +253,11 @@ static void cluster_pmu_set_resr(struct cluster_pmu *cluster, spin_lock_irqsave(&cluster->pmu_lock, flags); - resr_val = get_l2_indirect_reg(L2PMRESR); + resr_val = kryo_l2_get_indirect_reg(L2PMRESR); resr_val &= ~(L2PMRESR_GROUP_MASK << shift); resr_val |= field; resr_val |= L2PMRESR_EN; - set_l2_indirect_reg(L2PMRESR, resr_val); + kryo_l2_set_indirect_reg(L2PMRESR, resr_val); spin_unlock_irqrestore(&cluster->pmu_lock, flags); } @@ -315,14 +273,14 @@ static inline void cluster_pmu_set_evfilter_sys_mode(u32 ctr) L2PMXEVFILTER_ORGFILTER_IDINDEP | L2PMXEVFILTER_ORGFILTER_ALL; - set_l2_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val); } static inline u32 cluster_pmu_getreset_ovsr(void) { - u32 result = get_l2_indirect_reg(L2PMOVSSET); + u32 result = kryo_l2_get_indirect_reg(L2PMOVSSET); - set_l2_indirect_reg(L2PMOVSCLR, result); + kryo_l2_set_indirect_reg(L2PMOVSCLR, result); return result; } @@ -767,7 +725,7 @@ static int get_num_counters(void) { int val; - val = get_l2_indirect_reg(L2PMCR); + val = kryo_l2_get_indirect_reg(L2PMCR); /* * Read number of counters from L2PMCR and add 1 diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 899f8c066797..3dc3e3d61ea3 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -53,6 +53,10 @@ config QCOM_LLCC SDM845. This provides interfaces to clients that use the LLCC. Say yes here to enable LLCC slice driver. +config QCOM_KRYO_L2_ACCESSORS + bool + depends on ARCH_QCOM && ARM64 || COMPILE_TEST + config QCOM_MDT_LOADER tristate select QCOM_SCM diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 7d7e2ecbdce6..93392d9dc7f7 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_QCOM_APR) += apr.o obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o +obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c new file mode 100644 index 000000000000..c20cb92077c0 --- /dev/null +++ b/drivers/soc/qcom/kryo-l2-accessors.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/spinlock.h> +#include <asm/barrier.h> +#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> + +#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) +#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) + +static DEFINE_RAW_SPINLOCK(l2_access_lock); + +/** + * kryo_l2_set_indirect_reg() - write value to an L2 register + * @reg: Address of L2 register. + * @value: Value to be written to register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +void kryo_l2_set_indirect_reg(u64 reg, u64 val) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + write_sysreg_s(val, L2CPUSRDR_EL1); + isb(); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); +} +EXPORT_SYMBOL(kryo_l2_set_indirect_reg); + +/** + * kryo_l2_get_indirect_reg() - read an L2 register value + * @reg: Address of L2 register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +u64 kryo_l2_get_indirect_reg(u64 reg) +{ + u64 val; + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + val = read_sysreg_s(L2CPUSRDR_EL1); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); + + return val; +} +EXPORT_SYMBOL(kryo_l2_get_indirect_reg); |