diff options
author | 2024-03-02 20:53:03 +0100 | |
---|---|---|
committer | 2024-03-05 19:21:17 -0800 | |
commit | 3e43b903da04927f60894a603678f761c66d6e37 (patch) | |
tree | 6fff0d28765fcdb77907454d00b33fa0b60d6b83 /drivers | |
parent | net: phy: Keep track of EEE configuration (diff) | |
download | linux-3e43b903da04927f60894a603678f761c66d6e37.tar.gz linux-3e43b903da04927f60894a603678f761c66d6e37.tar.bz2 linux-3e43b903da04927f60894a603678f761c66d6e37.zip |
net: phy: Immediately call adjust_link if only tx_lpi_enabled changes
The MAC driver changes its EEE hardware configuration in its
adjust_link callback. This is called when auto-neg
completes. Disabling EEE via eee_enabled false will trigger an
autoneg, and as a result the adjust_link callback will be called with
phydev->enable_tx_lpi set to false. Similarly, eee_enabled set to true
and with a change of advertised link modes will result in a new
autoneg, and a call the adjust_link call.
If set_eee is called with only a change to tx_lpi_enabled which does
not trigger an auto-neg, it is necessary to call the adjust_link
callback so that the MAC is reconfigured to take this change into
account.
When setting phydev->enable_tx_lpi, take both eee_enabled and
tx_lpi_enabled into account, so the MAC drivers just needs to act on
phydev->enable_tx_lpi and not the whole EEE configuration.
The same check should be done for tx_lpi_timer too.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240302195306.3207716-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/phy-c45.c | 14 | ||||
-rw-r--r-- | drivers/net/phy/phy.c | 40 |
2 files changed, 49 insertions, 5 deletions
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index 3e95b8a15f44..5695935fdce9 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -1550,6 +1550,8 @@ EXPORT_SYMBOL(genphy_c45_ethtool_get_eee); * advertised, but the previously advertised link modes are * retained. This allows EEE to be enabled/disabled in a * non-destructive way. + * Returns either error code, 0 if there was no change, or positive + * value if there was a change which triggered auto-neg. */ int genphy_c45_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data) @@ -1576,8 +1578,16 @@ int genphy_c45_ethtool_set_eee(struct phy_device *phydev, phydev->eee_enabled = data->eee_enabled; ret = genphy_c45_an_config_eee_aneg(phydev); - if (ret > 0) - return phy_restart_aneg(phydev); + if (ret > 0) { + ret = phy_restart_aneg(phydev); + if (ret < 0) + return ret; + + /* explicitly return 1, otherwise (ret > 0) value will be + * overwritten by phy_restart_aneg(). + */ + return 1; + } return ret; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 95c4ef5d4e97..c3a0a5ee5f11 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -988,7 +988,8 @@ static int phy_check_link_status(struct phy_device *phydev) if (err < 0) phydev->enable_tx_lpi = false; else - phydev->enable_tx_lpi = !!err; + phydev->enable_tx_lpi = (err & phydev->eee_cfg.tx_lpi_enabled); + phy_link_up(phydev); } else if (!phydev->link && phydev->state != PHY_NOLINK) { phydev->state = PHY_NOLINK; @@ -1660,6 +1661,36 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data) EXPORT_SYMBOL(phy_ethtool_get_eee); /** + * phy_ethtool_set_eee_noneg - Adjusts MAC LPI configuration without PHY + * renegotiation + * @phydev: pointer to the target PHY device structure + * @data: pointer to the ethtool_keee structure containing the new EEE settings + * + * This function updates the Energy Efficient Ethernet (EEE) configuration + * for cases where only the MAC's Low Power Idle (LPI) configuration changes, + * without triggering PHY renegotiation. It ensures that the MAC is properly + * informed of the new LPI settings by cycling the link down and up, which + * is necessary for the MAC to adopt the new configuration. This adjustment + * is done only if there is a change in the tx_lpi_enabled or tx_lpi_timer + * configuration. + */ +static void phy_ethtool_set_eee_noneg(struct phy_device *phydev, + struct ethtool_keee *data) +{ + if (phydev->eee_cfg.tx_lpi_enabled != data->tx_lpi_enabled || + phydev->eee_cfg.tx_lpi_timer != data->tx_lpi_timer) { + eee_to_eeecfg(&phydev->eee_cfg, data); + phydev->enable_tx_lpi = eeecfg_mac_can_tx_lpi(&phydev->eee_cfg); + if (phydev->link) { + phydev->link = false; + phy_link_down(phydev); + phydev->link = true; + phy_link_up(phydev); + } + } +} + +/** * phy_ethtool_set_eee - set EEE supported and status * @phydev: target phy_device struct * @data: ethtool_keee data @@ -1675,11 +1706,14 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data) mutex_lock(&phydev->lock); ret = genphy_c45_ethtool_set_eee(phydev, data); - if (!ret) + if (ret >= 0) { + if (ret == 0) + phy_ethtool_set_eee_noneg(phydev, data); eee_to_eeecfg(&phydev->eee_cfg, data); + } mutex_unlock(&phydev->lock); - return ret; + return ret < 0 ? ret : 0; } EXPORT_SYMBOL(phy_ethtool_set_eee); |