diff options
author | 2023-01-09 18:00:10 +0100 | |
---|---|---|
committer | 2023-01-11 08:35:02 +0000 | |
commit | a23a1e57a6770a8fad1c6362dfe73bd9f27e430c (patch) | |
tree | c7d44ce07f89ef3759a7a59cde5fc16848c1ecf3 /drivers | |
parent | drivers/net/phy: add the link modes for the 10BASE-T1S Ethernet PHY (diff) | |
download | linux-a23a1e57a6770a8fad1c6362dfe73bd9f27e430c.tar.gz linux-a23a1e57a6770a8fad1c6362dfe73bd9f27e430c.tar.bz2 linux-a23a1e57a6770a8fad1c6362dfe73bd9f27e430c.zip |
drivers/net/phy: add connection between ethtool and phylib for PLCA
This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/phy.c | 192 | ||||
-rw-r--r-- | drivers/net/phy/phy_device.c | 3 |
2 files changed, 195 insertions, 0 deletions
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e5b6cb1a77f9..3378ca4f49b6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -544,6 +544,198 @@ int phy_ethtool_get_stats(struct phy_device *phydev, EXPORT_SYMBOL(phy_ethtool_get_stats); /** + * phy_ethtool_get_plca_cfg - Get PLCA RS configuration + * @phydev: the phy_device struct + * @plca_cfg: where to store the retrieved configuration + * + * Retrieve the PLCA configuration from the PHY. Return 0 on success or a + * negative value if an error occurred. + */ +int phy_ethtool_get_plca_cfg(struct phy_device *phydev, + struct phy_plca_cfg *plca_cfg) +{ + int ret; + + if (!phydev->drv) { + ret = -EIO; + goto out; + } + + if (!phydev->drv->get_plca_cfg) { + ret = -EOPNOTSUPP; + goto out; + } + + mutex_lock(&phydev->lock); + ret = phydev->drv->get_plca_cfg(phydev, plca_cfg); + + mutex_unlock(&phydev->lock); +out: + return ret; +} + +/** + * plca_check_valid - Check PLCA configuration before enabling + * @phydev: the phy_device struct + * @plca_cfg: current PLCA configuration + * @extack: extack for reporting useful error messages + * + * Checks whether the PLCA and PHY configuration are consistent and it is safe + * to enable PLCA. Returns 0 on success or a negative value if the PLCA or PHY + * configuration is not consistent. + */ +static int plca_check_valid(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack) +{ + int ret = 0; + + if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, + phydev->advertising)) { + ret = -EOPNOTSUPP; + NL_SET_ERR_MSG(extack, + "Point to Multi-Point mode is not enabled"); + } else if (plca_cfg->node_id >= 255) { + NL_SET_ERR_MSG(extack, "PLCA node ID is not set"); + ret = -EINVAL; + } + + return ret; +} + +/** + * phy_ethtool_set_plca_cfg - Set PLCA RS configuration + * @phydev: the phy_device struct + * @plca_cfg: new PLCA configuration to apply + * @extack: extack for reporting useful error messages + * + * Sets the PLCA configuration in the PHY. Return 0 on success or a + * negative value if an error occurred. + */ +int phy_ethtool_set_plca_cfg(struct phy_device *phydev, + const struct phy_plca_cfg *plca_cfg, + struct netlink_ext_ack *extack) +{ + struct phy_plca_cfg *curr_plca_cfg; + int ret; + + if (!phydev->drv) { + ret = -EIO; + goto out; + } + + if (!phydev->drv->set_plca_cfg || + !phydev->drv->get_plca_cfg) { + ret = -EOPNOTSUPP; + goto out; + } + + curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL); + if (!curr_plca_cfg) { + ret = -ENOMEM; + goto out; + } + + mutex_lock(&phydev->lock); + + ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg); + if (ret) + goto out_drv; + + if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'enable' attribute"); + ret = -EINVAL; + goto out_drv; + } + + if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'local node ID' attribute"); + ret = -EINVAL; + goto out_drv; + } + + if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'node count' attribute"); + ret = -EINVAL; + goto out_drv; + } + + if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'TO timer' attribute"); + ret = -EINVAL; + goto out_drv; + } + + if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'burst count' attribute"); + ret = -EINVAL; + goto out_drv; + } + + if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) { + NL_SET_ERR_MSG(extack, + "PHY does not support changing the PLCA 'burst timer' attribute"); + ret = -EINVAL; + goto out_drv; + } + + // if enabling PLCA, perform a few sanity checks + if (plca_cfg->enabled > 0) { + // allow setting node_id concurrently with enabled + if (plca_cfg->node_id >= 0) + curr_plca_cfg->node_id = plca_cfg->node_id; + + ret = plca_check_valid(phydev, curr_plca_cfg, extack); + if (ret) + goto out_drv; + } + + ret = phydev->drv->set_plca_cfg(phydev, plca_cfg); + +out_drv: + kfree(curr_plca_cfg); + mutex_unlock(&phydev->lock); +out: + return ret; +} + +/** + * phy_ethtool_get_plca_status - Get PLCA RS status information + * @phydev: the phy_device struct + * @plca_st: where to store the retrieved status information + * + * Retrieve the PLCA status information from the PHY. Return 0 on success or a + * negative value if an error occurred. + */ +int phy_ethtool_get_plca_status(struct phy_device *phydev, + struct phy_plca_status *plca_st) +{ + int ret; + + if (!phydev->drv) { + ret = -EIO; + goto out; + } + + if (!phydev->drv->get_plca_status) { + ret = -EOPNOTSUPP; + goto out; + } + + mutex_lock(&phydev->lock); + ret = phydev->drv->get_plca_status(phydev, plca_st); + + mutex_unlock(&phydev->lock); +out: + return ret; +} + +/** * phy_start_cable_test - Start a cable test * * @phydev: the phy_device struct diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 1cde41d39196..0d371a0a49f2 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -3283,6 +3283,9 @@ static const struct ethtool_phy_ops phy_ethtool_phy_ops = { .get_sset_count = phy_ethtool_get_sset_count, .get_strings = phy_ethtool_get_strings, .get_stats = phy_ethtool_get_stats, + .get_plca_cfg = phy_ethtool_get_plca_cfg, + .set_plca_cfg = phy_ethtool_set_plca_cfg, + .get_plca_status = phy_ethtool_get_plca_status, .start_cable_test = phy_start_cable_test, .start_cable_test_tdr = phy_start_cable_test_tdr, }; |