Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  updates for 5.18-rc1.

  Included in here are merges from driver subsystems which contain:

   - iio driver updates and new drivers

   - fsi driver updates

   - fpga driver updates

   - habanalabs driver updates and support for new hardware

   - soundwire driver updates and new drivers

   - phy driver updates and new drivers

   - coresight driver updates

   - icc driver updates

  Individual changes include:

   - mei driver updates

   - interconnect driver updates

   - new PECI driver subsystem added

   - vmci driver updates

   - lots of tiny misc/char driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
  firmware: google: Properly state IOMEM dependency
  kgdbts: fix return value of __setup handler
  firmware: sysfb: fix platform-device leak in error path
  firmware: stratix10-svc: add missing callback parameter on RSU
  arm64: dts: qcom: add non-secure domain property to fastrpc nodes
  misc: fastrpc: Add dma handle implementation
  misc: fastrpc: Add fdlist implementation
  misc: fastrpc: Add helper function to get list and page
  misc: fastrpc: Add support to secure memory map
  dt-bindings: misc: add fastrpc domain vmid property
  misc: fastrpc: check before loading process to the DSP
  misc: fastrpc: add secure domain support
  dt-bindings: misc: add property to support non-secure DSP
  misc: fastrpc: Add support to get DSP capabilities
  misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
  misc: fastrpc: separate fastrpc device from channel context
  dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
  dt-bindings: nvmem: make "reg" property optional
  nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
  nvmem: dt-bindings: Fix the error of dt-bindings check
  ...

16 files changed, 402 insertions, 81 deletions

diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index 93a2922b7653..9f445f09fcfe 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -36,7 +36,6 @@
 extern struct bus_type coresight_bustype;
 
 enum coresight_dev_type {
-	CORESIGHT_DEV_TYPE_NONE,
 	CORESIGHT_DEV_TYPE_SINK,
 	CORESIGHT_DEV_TYPE_LINK,
 	CORESIGHT_DEV_TYPE_LINKSINK,
@@ -46,7 +45,6 @@ enum coresight_dev_type {
 };
 
 enum coresight_dev_subtype_sink {
-	CORESIGHT_DEV_SUBTYPE_SINK_NONE,
 	CORESIGHT_DEV_SUBTYPE_SINK_PORT,
 	CORESIGHT_DEV_SUBTYPE_SINK_BUFFER,
 	CORESIGHT_DEV_SUBTYPE_SINK_SYSMEM,
@@ -54,21 +52,18 @@ enum coresight_dev_subtype_sink {
 };
 
 enum coresight_dev_subtype_link {
-	CORESIGHT_DEV_SUBTYPE_LINK_NONE,
 	CORESIGHT_DEV_SUBTYPE_LINK_MERG,
 	CORESIGHT_DEV_SUBTYPE_LINK_SPLIT,
 	CORESIGHT_DEV_SUBTYPE_LINK_FIFO,
 };
 
 enum coresight_dev_subtype_source {
-	CORESIGHT_DEV_SUBTYPE_SOURCE_NONE,
 	CORESIGHT_DEV_SUBTYPE_SOURCE_PROC,
 	CORESIGHT_DEV_SUBTYPE_SOURCE_BUS,
 	CORESIGHT_DEV_SUBTYPE_SOURCE_SOFTWARE,
 };
 
 enum coresight_dev_subtype_helper {
-	CORESIGHT_DEV_SUBTYPE_HELPER_NONE,
 	CORESIGHT_DEV_SUBTYPE_HELPER_CATU,
 };
 
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index c3e5ab014caf..aad497a9ad8b 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -321,8 +321,6 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_ECC_DBE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)
 
-#endif
-
 /**
  * Request INTEL_SIP_SMC_RSU_NOTIFY
  *
@@ -404,3 +402,22 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18
 #define INTEL_SIP_SMC_RSU_MAX_RETRY \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
+
+/**
+ * Request INTEL_SIP_SMC_FIRMWARE_VERSION
+ *
+ * Sync call used to query the version of running firmware
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_FIRMWARE_VERSION
+ * a1-a7 not used
+ *
+ * Return status:
+ * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR
+ * a1 running firmware version
+ */
+#define INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION 31
+#define INTEL_SIP_SMC_FIRMWARE_VERSION \
+        INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION)
+
+#endif
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index 19781b0f6429..18c1841fdb1f 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -104,6 +104,9 @@ struct stratix10_svc_chan;
  *
  * @COMMAND_RSU_DCMF_VERSION: query firmware for the DCMF version, return status
  * is SVC_STATUS_OK or SVC_STATUS_ERROR
+ *
+ * @COMMAND_FIRMWARE_VERSION: query running firmware version, return status
+ * is SVC_STATUS_OK or SVC_STATUS_ERROR
  */
 enum stratix10_svc_command_code {
 	COMMAND_NOOP = 0,
@@ -117,6 +120,7 @@ enum stratix10_svc_command_code {
 	COMMAND_RSU_RETRY,
 	COMMAND_RSU_MAX_RETRY,
 	COMMAND_RSU_DCMF_VERSION,
+	COMMAND_FIRMWARE_VERSION,
 };
 
 /**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index f6783f58c64a..14f00a7672d1 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -144,6 +144,9 @@ enum pm_ioctl_id {
 	IOCTL_OSPI_MUX_SELECT = 21,
 	/* Register SGI to ATF */
 	IOCTL_REGISTER_SGI = 25,
+	/* Runtime feature configuration */
+	IOCTL_SET_FEATURE_CONFIG = 26,
+	IOCTL_GET_FEATURE_CONFIG = 27,
 };
 
 enum pm_query_id {
@@ -377,6 +380,14 @@ enum ospi_mux_select_type {
 	PM_OSPI_MUX_SEL_LINEAR = 1,
 };
 
+enum pm_feature_config_id {
+	PM_FEATURE_INVALID = 0,
+	PM_FEATURE_OVERTEMP_STATUS = 1,
+	PM_FEATURE_OVERTEMP_VALUE = 2,
+	PM_FEATURE_EXTWDT_STATUS = 3,
+	PM_FEATURE_EXTWDT_VALUE = 4,
+};
+
 /**
  * struct zynqmp_pm_query_data - PM query data
  * @qid:	query ID
@@ -449,6 +460,8 @@ int zynqmp_pm_load_pdi(const u32 src, const u64 address);
 int zynqmp_pm_register_notifier(const u32 node, const u32 event,
 				const u32 wake, const u32 enable);
 int zynqmp_pm_feature(const u32 api_id);
+int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value);
+int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -697,6 +710,18 @@ static inline int zynqmp_pm_feature(const u32 api_id)
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_set_feature_config(enum pm_feature_config_id id,
+					       u32 value)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_get_feature_config(enum pm_feature_config_id id,
+					       u32 *payload)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
diff --git a/include/linux/iio/adc/qcom-vadc-common.h b/include/linux/iio/adc/qcom-vadc-common.h
index 33f60f43e1aa..ce78d4804994 100644
--- a/include/linux/iio/adc/qcom-vadc-common.h
+++ b/include/linux/iio/adc/qcom-vadc-common.h
@@ -6,6 +6,7 @@
 #ifndef QCOM_VADC_COMMON_H
 #define QCOM_VADC_COMMON_H
 
+#include <linux/math.h>
 #include <linux/types.h>
 
 #define VADC_CONV_TIME_MIN_US			2000
@@ -80,16 +81,6 @@ struct vadc_linear_graph {
 };
 
 /**
- * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
- * @num: the inverse numerator of the gain applied to the input channel.
- * @den: the inverse denominator of the gain applied to the input channel.
- */
-struct vadc_prescale_ratio {
-	u32 num;
-	u32 den;
-};
-
-/**
  * enum vadc_scale_fn_type - Scaling function to convert ADC code to
  *				physical scaled units for the channel.
  * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
@@ -144,12 +135,12 @@ struct adc5_data {
 
 int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
 		    const struct vadc_linear_graph *calib_graph,
-		    const struct vadc_prescale_ratio *prescale,
+		    const struct u32_fract *prescale,
 		    bool absolute,
 		    u16 adc_code, int *result_mdec);
 
 struct qcom_adc5_scale_type {
-	int (*scale_fn)(const struct vadc_prescale_ratio *prescale,
+	int (*scale_fn)(const struct u32_fract *prescale,
 		const struct adc5_data *data, u16 adc_code, int *result);
 };
 
diff --git a/include/linux/iio/afe/rescale.h b/include/linux/iio/afe/rescale.h
new file mode 100644
index 000000000000..6eecb435488f
--- /dev/null
+++ b/include/linux/iio/afe/rescale.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2018 Axentia Technologies AB
+ */
+
+#ifndef __IIO_RESCALE_H__
+#define __IIO_RESCALE_H__
+
+#include <linux/types.h>
+#include <linux/iio/iio.h>
+
+struct device;
+struct rescale;
+
+struct rescale_cfg {
+	enum iio_chan_type type;
+	int (*props)(struct device *dev, struct rescale *rescale);
+};
+
+struct rescale {
+	const struct rescale_cfg *cfg;
+	struct iio_channel *source;
+	struct iio_chan_spec chan;
+	struct iio_chan_spec_ext_info *ext_info;
+	bool chan_processed;
+	s32 numerator;
+	s32 denominator;
+	s32 offset;
+};
+
+int rescale_process_scale(struct rescale *rescale, int scale_type,
+			  int *val, int *val2);
+int rescale_process_offset(struct rescale *rescale, int scale_type,
+			   int scale, int scale2, int schan_off,
+			   int *val, int *val2);
+#endif /* __IIO_RESCALE_H__ */
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 07025d6b3de1..faf00f2c0be6 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -489,7 +489,7 @@ struct iio_buffer_setup_ops {
 /**
  * struct iio_dev - industrial I/O device
  * @modes:		[DRIVER] operating modes supported by device
- * @currentmode:	[DRIVER] current operating mode
+ * @currentmode:	[INTERN] current operating mode
  * @dev:		[DRIVER] device structure, should be assigned a parent
  *			and owner
  * @buffer:		[DRIVER] any buffer present
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 7c02f5292eea..515ca09764fe 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -32,6 +32,7 @@ struct adis_timeout {
 	u16 sw_reset_ms;
 	u16 self_test_ms;
 };
+
 /**
  * struct adis_data - ADIS chip variant specific data
  * @read_delay: SPI delay for read operations in us
@@ -45,7 +46,7 @@ struct adis_timeout {
  * @self_test_mask: Bitmask of supported self-test operations
  * @self_test_reg: Register address to request self test command
  * @self_test_no_autoclear: True if device's self-test needs clear of ctrl reg
- * @status_error_msgs: Array of error messgaes
+ * @status_error_msgs: Array of error messages
  * @status_error_mask: Bitmask of errors supported by the device
  * @timeouts: Chip specific delays
  * @enable_irq: Hook for ADIS devices that have a special IRQ enable/disable
@@ -130,12 +131,12 @@ struct adis {
 	unsigned long		irq_flag;
 	void			*buffer;
 
-	uint8_t			tx[10] ____cacheline_aligned;
-	uint8_t			rx[4];
+	u8			tx[10] ____cacheline_aligned;
+	u8			rx[4];
 };
 
 int adis_init(struct adis *adis, struct iio_dev *indio_dev,
-	struct spi_device *spi, const struct adis_data *data);
+	      struct spi_device *spi, const struct adis_data *data);
 int __adis_reset(struct adis *adis);
 
 /**
@@ -156,9 +157,9 @@ static inline int adis_reset(struct adis *adis)
 }
 
 int __adis_write_reg(struct adis *adis, unsigned int reg,
-	unsigned int val, unsigned int size);
+		     unsigned int val, unsigned int size);
 int __adis_read_reg(struct adis *adis, unsigned int reg,
-	unsigned int *val, unsigned int size);
+		    unsigned int *val, unsigned int size);
 
 /**
  * __adis_write_reg_8() - Write single byte to a register (unlocked)
@@ -167,7 +168,7 @@ int __adis_read_reg(struct adis *adis, unsigned int reg,
  * @value: The value to write
  */
 static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
-	uint8_t val)
+				     u8 val)
 {
 	return __adis_write_reg(adis, reg, val, 1);
 }
@@ -179,7 +180,7 @@ static inline int __adis_write_reg_8(struct adis *adis, unsigned int reg,
  * @value: Value to be written
  */
 static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
-	uint16_t val)
+				      u16 val)
 {
 	return __adis_write_reg(adis, reg, val, 2);
 }
@@ -191,7 +192,7 @@ static inline int __adis_write_reg_16(struct adis *adis, unsigned int reg,
  * @value: Value to be written
  */
 static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
-	uint32_t val)
+				      u32 val)
 {
 	return __adis_write_reg(adis, reg, val, 4);
 }
@@ -203,7 +204,7 @@ static inline int __adis_write_reg_32(struct adis *adis, unsigned int reg,
  * @val: The value read back from the device
  */
 static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
-	uint16_t *val)
+				     u16 *val)
 {
 	unsigned int tmp;
 	int ret;
@@ -222,7 +223,7 @@ static inline int __adis_read_reg_16(struct adis *adis, unsigned int reg,
  * @val: The value read back from the device
  */
 static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
-	uint32_t *val)
+				     u32 *val)
 {
 	unsigned int tmp;
 	int ret;
@@ -242,7 +243,7 @@ static inline int __adis_read_reg_32(struct adis *adis, unsigned int reg,
  * @size: The size of the @value (in bytes)
  */
 static inline int adis_write_reg(struct adis *adis, unsigned int reg,
-	unsigned int val, unsigned int size)
+				 unsigned int val, unsigned int size)
 {
 	int ret;
 
@@ -261,7 +262,7 @@ static inline int adis_write_reg(struct adis *adis, unsigned int reg,
  * @size: The size of the @val buffer
  */
 static int adis_read_reg(struct adis *adis, unsigned int reg,
-	unsigned int *val, unsigned int size)
+			 unsigned int *val, unsigned int size)
 {
 	int ret;
 
@@ -279,7 +280,7 @@ static int adis_read_reg(struct adis *adis, unsigned int reg,
  * @value: The value to write
  */
 static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
-	uint8_t val)
+				   u8 val)
 {
 	return adis_write_reg(adis, reg, val, 1);
 }
@@ -291,7 +292,7 @@ static inline int adis_write_reg_8(struct adis *adis, unsigned int reg,
  * @value: Value to be written
  */
 static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
-	uint16_t val)
+				    u16 val)
 {
 	return adis_write_reg(adis, reg, val, 2);
 }
@@ -303,7 +304,7 @@ static inline int adis_write_reg_16(struct adis *adis, unsigned int reg,
  * @value: Value to be written
  */
 static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
-	uint32_t val)
+				    u32 val)
 {
 	return adis_write_reg(adis, reg, val, 4);
 }
@@ -315,7 +316,7 @@ static inline int adis_write_reg_32(struct adis *adis, unsigned int reg,
  * @val: The value read back from the device
  */
 static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
-	uint16_t *val)
+				   u16 *val)
 {
 	unsigned int tmp;
 	int ret;
@@ -334,7 +335,7 @@ static inline int adis_read_reg_16(struct adis *adis, unsigned int reg,
  * @val: The value read back from the device
  */
 static inline int adis_read_reg_32(struct adis *adis, unsigned int reg,
-	uint32_t *val)
+				   u32 *val)
 {
 	unsigned int tmp;
 	int ret;
@@ -381,10 +382,8 @@ static inline int adis_update_bits_base(struct adis *adis, unsigned int reg,
  * @val can lead to undesired behavior if the register to update is 16bit.
  */
 #define adis_update_bits(adis, reg, mask, val) ({			\
-	BUILD_BUG_ON(sizeof(val) == 1 || sizeof(val) == 8);		\
-	__builtin_choose_expr(sizeof(val) == 4,				\
-		adis_update_bits_base(adis, reg, mask, val, 4),         \
-		adis_update_bits_base(adis, reg, mask, val, 2));	\
+	BUILD_BUG_ON(sizeof(val) != 2 && sizeof(val) != 4);		\
+	adis_update_bits_base(adis, reg, mask, val, sizeof(val));	\
 })
 
 /**
@@ -399,10 +398,8 @@ static inline int adis_update_bits_base(struct adis *adis, unsigned int reg,
  * @val can lead to undesired behavior if the register to update is 16bit.
  */
 #define __adis_update_bits(adis, reg, mask, val) ({			\
-	BUILD_BUG_ON(sizeof(val) == 1 || sizeof(val) == 8);		\
-	__builtin_choose_expr(sizeof(val) == 4,				\
-		__adis_update_bits_base(adis, reg, mask, val, 4),	\
-		__adis_update_bits_base(adis, reg, mask, val, 2));	\
+	BUILD_BUG_ON(sizeof(val) != 2 && sizeof(val) != 4);		\
+	__adis_update_bits_base(adis, reg, mask, val, sizeof(val));	\
 })
 
 int adis_enable_irq(struct adis *adis, bool enable);
@@ -443,8 +440,8 @@ static inline void adis_dev_unlock(struct adis *adis)
 }
 
 int adis_single_conversion(struct iio_dev *indio_dev,
-	const struct iio_chan_spec *chan, unsigned int error_mask,
-	int *val);
+			   const struct iio_chan_spec *chan,
+			   unsigned int error_mask, int *val);
 
 #define ADIS_VOLTAGE_CHAN(addr, si, chan, name, info_all, bits) { \
 	.type = IIO_VOLTAGE, \
@@ -493,7 +490,7 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	.modified = 1, \
 	.channel2 = IIO_MOD_ ## mod, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
-		 info_sep, \
+		 (info_sep), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 	.info_mask_shared_by_all = info_all, \
 	.address = (addr), \
@@ -527,7 +524,7 @@ devm_adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
 int devm_adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev);
 
 int adis_update_scan_mode(struct iio_dev *indio_dev,
-	const unsigned long *scan_mask);
+			  const unsigned long *scan_mask);
 
 #else /* CONFIG_IIO_BUFFER */
 
@@ -551,7 +548,8 @@ static inline int devm_adis_probe_trigger(struct adis *adis,
 #ifdef CONFIG_DEBUG_FS
 
 int adis_debugfs_reg_access(struct iio_dev *indio_dev,
-	unsigned int reg, unsigned int writeval, unsigned int *readval);
+			    unsigned int reg, unsigned int writeval,
+			    unsigned int *readval);
 
 #else
 
diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h
index f2dd2fc8d3cd..f685777b875e 100644
--- a/include/linux/interconnect.h
+++ b/include/linux/interconnect.h
@@ -38,13 +38,6 @@ struct icc_bulk_data {
 	u32 peak_bw;
 };
 
-int __must_check of_icc_bulk_get(struct device *dev, int num_paths,
-				 struct icc_bulk_data *paths);
-void icc_bulk_put(int num_paths, struct icc_bulk_data *paths);
-int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths);
-int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths);
-void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths);
-
 #if IS_ENABLED(CONFIG_INTERCONNECT)
 
 struct icc_path *icc_get(struct device *dev, const int src_id,
@@ -58,6 +51,12 @@ int icc_disable(struct icc_path *path);
 int icc_set_bw(struct icc_path *path, u32 avg_bw, u32 peak_bw);
 void icc_set_tag(struct icc_path *path, u32 tag);
 const char *icc_get_name(struct icc_path *path);
+int __must_check of_icc_bulk_get(struct device *dev, int num_paths,
+				 struct icc_bulk_data *paths);
+void icc_bulk_put(int num_paths, struct icc_bulk_data *paths);
+int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths);
+int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths);
+void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths);
 
 #else
 
@@ -112,6 +111,29 @@ static inline const char *icc_get_name(struct icc_path *path)
 	return NULL;
 }
 
+static inline int of_icc_bulk_get(struct device *dev, int num_paths, struct icc_bulk_data *paths)
+{
+	return 0;
+}
+
+static inline void icc_bulk_put(int num_paths, struct icc_bulk_data *paths)
+{
+}
+
+static inline int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths)
+{
+	return 0;
+}
+
+static inline int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths)
+{
+	return 0;
+}
+
+static inline void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths)
+{
+}
+
 #endif /* CONFIG_INTERCONNECT */
 
 #endif /* __LINUX_INTERCONNECT_H */
diff --git a/include/linux/math.h b/include/linux/math.h
index 53674a327e39..439b8f0b9ebd 100644
--- a/include/linux/math.h
+++ b/include/linux/math.h
@@ -2,6 +2,7 @@
 #ifndef _LINUX_MATH_H
 #define _LINUX_MATH_H
 
+#include <linux/types.h>
 #include <asm/div64.h>
 #include <uapi/linux/kernel.h>
 
@@ -106,6 +107,17 @@
 }							\
 )
 
+#define __STRUCT_FRACT(type)				\
+struct type##_fract {					\
+	__##type numerator;				\
+	__##type denominator;				\
+};
+__STRUCT_FRACT(s16)
+__STRUCT_FRACT(u16)
+__STRUCT_FRACT(s32)
+__STRUCT_FRACT(u32)
+#undef __STRUCT_FRACT
+
 /*
  * Multiplies an integer by a fraction, while avoiding unnecessary
  * overflow or loss of precision.
diff --git a/include/linux/mux/consumer.h b/include/linux/mux/consumer.h
index 7a09b040ac39..2e25c838f831 100644
--- a/include/linux/mux/consumer.h
+++ b/include/linux/mux/consumer.h
@@ -14,14 +14,19 @@
 
 struct device;
 struct mux_control;
+struct mux_state;
 
 unsigned int mux_control_states(struct mux_control *mux);
 int __must_check mux_control_select_delay(struct mux_control *mux,
 					  unsigned int state,
 					  unsigned int delay_us);
+int __must_check mux_state_select_delay(struct mux_state *mstate,
+					unsigned int delay_us);
 int __must_check mux_control_try_select_delay(struct mux_control *mux,
 					      unsigned int state,
 					      unsigned int delay_us);
+int __must_check mux_state_try_select_delay(struct mux_state *mstate,
+					    unsigned int delay_us);
 
 static inline int __must_check mux_control_select(struct mux_control *mux,
 						  unsigned int state)
@@ -29,18 +34,31 @@ static inline int __must_check mux_control_select(struct mux_control *mux,
 	return mux_control_select_delay(mux, state, 0);
 }
 
+static inline int __must_check mux_state_select(struct mux_state *mstate)
+{
+	return mux_state_select_delay(mstate, 0);
+}
+
 static inline int __must_check mux_control_try_select(struct mux_control *mux,
 						      unsigned int state)
 {
 	return mux_control_try_select_delay(mux, state, 0);
 }
 
+static inline int __must_check mux_state_try_select(struct mux_state *mstate)
+{
+	return mux_state_try_select_delay(mstate, 0);
+}
+
 int mux_control_deselect(struct mux_control *mux);
+int mux_state_deselect(struct mux_state *mstate);
 
 struct mux_control *mux_control_get(struct device *dev, const char *mux_name);
 void mux_control_put(struct mux_control *mux);
 
 struct mux_control *devm_mux_control_get(struct device *dev,
 					 const char *mux_name);
+struct mux_state *devm_mux_state_get(struct device *dev,
+				     const char *mux_name);
 
 #endif /* _LINUX_MUX_CONSUMER_H */
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index c9a3ac9efeaa..50caa117cb62 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -135,8 +135,6 @@ void nvmem_unregister(struct nvmem_device *nvmem);
 struct nvmem_device *devm_nvmem_register(struct device *dev,
 					 const struct nvmem_config *cfg);
 
-int devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem);
-
 void nvmem_add_cell_table(struct nvmem_cell_table *table);
 void nvmem_del_cell_table(struct nvmem_cell_table *table);
 
@@ -155,12 +153,6 @@ devm_nvmem_register(struct device *dev, const struct nvmem_config *c)
 	return nvmem_register(c);
 }
 
-static inline int
-devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem)
-{
-	return -EOPNOTSUPP;
-}
-
 static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {}
 static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
 
diff --git a/include/linux/peci-cpu.h b/include/linux/peci-cpu.h
new file mode 100644
index 000000000000..ff8ae9c26c80
--- /dev/null
+++ b/include/linux/peci-cpu.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2021 Intel Corporation */
+
+#ifndef __LINUX_PECI_CPU_H
+#define __LINUX_PECI_CPU_H
+
+#include <linux/types.h>
+
+#include "../../arch/x86/include/asm/intel-family.h"
+
+#define PECI_PCS_PKG_ID			0  /* Package Identifier Read */
+#define  PECI_PKG_ID_CPU_ID		0x0000  /* CPUID Info */
+#define  PECI_PKG_ID_PLATFORM_ID	0x0001  /* Platform ID */
+#define  PECI_PKG_ID_DEVICE_ID		0x0002  /* Uncore Device ID */
+#define  PECI_PKG_ID_MAX_THREAD_ID	0x0003  /* Max Thread ID */
+#define  PECI_PKG_ID_MICROCODE_REV	0x0004  /* CPU Microcode Update Revision */
+#define  PECI_PKG_ID_MCA_ERROR_LOG	0x0005  /* Machine Check Status */
+#define PECI_PCS_MODULE_TEMP		9  /* Per Core DTS Temperature Read */
+#define PECI_PCS_THERMAL_MARGIN		10 /* DTS thermal margin */
+#define PECI_PCS_DDR_DIMM_TEMP		14 /* DDR DIMM Temperature */
+#define PECI_PCS_TEMP_TARGET		16 /* Temperature Target Read */
+#define PECI_PCS_TDP_UNITS		30 /* Units for power/energy registers */
+
+struct peci_device;
+
+int peci_temp_read(struct peci_device *device, s16 *temp_raw);
+
+int peci_pcs_read(struct peci_device *device, u8 index,
+		  u16 param, u32 *data);
+
+int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev,
+			u8 func, u16 reg, u32 *data);
+
+int peci_ep_pci_local_read(struct peci_device *device, u8 seg,
+			   u8 bus, u8 dev, u8 func, u16 reg, u32 *data);
+
+int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg,
+		   u8 bus, u8 dev, u8 func, u64 address, u32 *data);
+
+#endif /* __LINUX_PECI_CPU_H */
diff --git a/include/linux/peci.h b/include/linux/peci.h
new file mode 100644
index 000000000000..06e6ef935297
--- /dev/null
+++ b/include/linux/peci.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2018-2021 Intel Corporation */
+
+#ifndef __LINUX_PECI_H
+#define __LINUX_PECI_H
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+/*
+ * Currently we don't support any PECI command over 32 bytes.
+ */
+#define PECI_REQUEST_MAX_BUF_SIZE 32
+
+struct peci_controller;
+struct peci_request;
+
+/**
+ * struct peci_controller_ops - PECI controller specific methods
+ * @xfer: PECI transfer function
+ *
+ * PECI controllers may have different hardware interfaces - the drivers
+ * implementing PECI controllers can use this structure to abstract away those
+ * differences by exposing a common interface for PECI core.
+ */
+struct peci_controller_ops {
+	int (*xfer)(struct peci_controller *controller, u8 addr, struct peci_request *req);
+};
+
+/**
+ * struct peci_controller - PECI controller
+ * @dev: device object to register PECI controller to the device model
+ * @ops: pointer to device specific controller operations
+ * @bus_lock: lock used to protect multiple callers
+ * @id: PECI controller ID
+ *
+ * PECI controllers usually connect to their drivers using non-PECI bus,
+ * such as the platform bus.
+ * Each PECI controller can communicate with one or more PECI devices.
+ */
+struct peci_controller {
+	struct device dev;
+	struct peci_controller_ops *ops;
+	struct mutex bus_lock; /* held for the duration of xfer */
+	u8 id;
+};
+
+struct peci_controller *devm_peci_controller_add(struct device *parent,
+						 struct peci_controller_ops *ops);
+
+static inline struct peci_controller *to_peci_controller(void *d)
+{
+	return container_of(d, struct peci_controller, dev);
+}
+
+/**
+ * struct peci_device - PECI device
+ * @dev: device object to register PECI device to the device model
+ * @controller: manages the bus segment hosting this PECI device
+ * @info: PECI device characteristics
+ * @info.family: device family
+ * @info.model: device model
+ * @info.peci_revision: PECI revision supported by the PECI device
+ * @info.socket_id: the socket ID represented by the PECI device
+ * @addr: address used on the PECI bus connected to the parent controller
+ * @deleted: indicates that PECI device was already deleted
+ *
+ * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus.
+ * The behaviour exposed to the rest of the system is defined by the PECI driver
+ * managing the device.
+ */
+struct peci_device {
+	struct device dev;
+	struct {
+		u16 family;
+		u8 model;
+		u8 peci_revision;
+		u8 socket_id;
+	} info;
+	u8 addr;
+	bool deleted;
+};
+
+static inline struct peci_device *to_peci_device(struct device *d)
+{
+	return container_of(d, struct peci_device, dev);
+}
+
+/**
+ * struct peci_request - PECI request
+ * @device: PECI device to which the request is sent
+ * @tx: TX buffer specific data
+ * @tx.buf: TX buffer
+ * @tx.len: transfer data length in bytes
+ * @rx: RX buffer specific data
+ * @rx.buf: RX buffer
+ * @rx.len: received data length in bytes
+ *
+ * A peci_request represents a request issued by PECI originator (TX) and
+ * a response received from PECI responder (RX).
+ */
+struct peci_request {
+	struct peci_device *device;
+	struct {
+		u8 buf[PECI_REQUEST_MAX_BUF_SIZE];
+		u8 len;
+	} rx, tx;
+};
+
+#endif /* __LINUX_PECI_H */
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index 4ab7bfc675f1..3d780b44e678 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -1095,7 +1095,7 @@ struct pcr_ops {
 	unsigned int	(*cd_deglitch)(struct rtsx_pcr *pcr);
 	int		(*conv_clk_and_div_n)(int clk, int dir);
 	void		(*fetch_vendor_settings)(struct rtsx_pcr *pcr);
-	void		(*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state);
+	void		(*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state, bool runtime);
 	void		(*stop_cmd)(struct rtsx_pcr *pcr);
 
 	void (*set_aspm)(struct rtsx_pcr *pcr, bool enable);
@@ -1201,8 +1201,6 @@ struct rtsx_pcr {
 	unsigned int			card_exist;
 
 	struct delayed_work		carddet_work;
-	struct delayed_work		idle_work;
-	struct delayed_work		rtd3_work;
 
 	spinlock_t			lock;
 	struct mutex			pcr_mutex;
@@ -1212,7 +1210,6 @@ struct rtsx_pcr {
 	unsigned int			cur_clock;
 	bool				remove_pci;
 	bool				msi_en;
-	bool				is_runtime_suspended;
 
 #define EXTRA_CAPS_SD_SDR50		(1 << 0)
 #define EXTRA_CAPS_SD_SDR104		(1 << 1)
diff --git a/include/linux/vmw_vmci_defs.h b/include/linux/vmw_vmci_defs.h
index e36cb114c188..6fb663b36f72 100644
--- a/include/linux/vmw_vmci_defs.h
+++ b/include/linux/vmw_vmci_defs.h
@@ -12,15 +12,20 @@
 #include <linux/bits.h>
 
 /* Register offsets. */
-#define VMCI_STATUS_ADDR      0x00
-#define VMCI_CONTROL_ADDR     0x04
-#define VMCI_ICR_ADDR	      0x08
-#define VMCI_IMR_ADDR         0x0c
-#define VMCI_DATA_OUT_ADDR    0x10
-#define VMCI_DATA_IN_ADDR     0x14
-#define VMCI_CAPS_ADDR        0x18
-#define VMCI_RESULT_LOW_ADDR  0x1c
-#define VMCI_RESULT_HIGH_ADDR 0x20
+#define VMCI_STATUS_ADDR        0x00
+#define VMCI_CONTROL_ADDR       0x04
+#define VMCI_ICR_ADDR           0x08
+#define VMCI_IMR_ADDR           0x0c
+#define VMCI_DATA_OUT_ADDR      0x10
+#define VMCI_DATA_IN_ADDR       0x14
+#define VMCI_CAPS_ADDR          0x18
+#define VMCI_RESULT_LOW_ADDR    0x1c
+#define VMCI_RESULT_HIGH_ADDR   0x20
+#define VMCI_DATA_OUT_LOW_ADDR  0x24
+#define VMCI_DATA_OUT_HIGH_ADDR 0x28
+#define VMCI_DATA_IN_LOW_ADDR   0x2c
+#define VMCI_DATA_IN_HIGH_ADDR  0x30
+#define VMCI_GUEST_PAGE_SHIFT   0x34
 
 /* Max number of devices. */
 #define VMCI_MAX_DEVICES 1
@@ -39,17 +44,27 @@
 #define VMCI_CAPS_DATAGRAM      BIT(2)
 #define VMCI_CAPS_NOTIFICATIONS BIT(3)
 #define VMCI_CAPS_PPN64         BIT(4)
+#define VMCI_CAPS_DMA_DATAGRAM  BIT(5)
 
 /* Interrupt Cause register bits. */
 #define VMCI_ICR_DATAGRAM      BIT(0)
 #define VMCI_ICR_NOTIFICATION  BIT(1)
+#define VMCI_ICR_DMA_DATAGRAM  BIT(2)
 
 /* Interrupt Mask register bits. */
 #define VMCI_IMR_DATAGRAM      BIT(0)
 #define VMCI_IMR_NOTIFICATION  BIT(1)
+#define VMCI_IMR_DMA_DATAGRAM  BIT(2)
 
-/* Maximum MSI/MSI-X interrupt vectors in the device. */
-#define VMCI_MAX_INTRS 2
+/*
+ * Maximum MSI/MSI-X interrupt vectors in the device.
+ * If VMCI_CAPS_DMA_DATAGRAM is supported by the device,
+ * VMCI_MAX_INTRS_DMA_DATAGRAM vectors are available,
+ * otherwise only VMCI_MAX_INTRS_NOTIFICATION.
+ */
+#define VMCI_MAX_INTRS_NOTIFICATION 2
+#define VMCI_MAX_INTRS_DMA_DATAGRAM 3
+#define VMCI_MAX_INTRS              VMCI_MAX_INTRS_DMA_DATAGRAM
 
 /*
  * Supported interrupt vectors.  There is one for each ICR value above,
@@ -58,6 +73,7 @@
 enum {
 	VMCI_INTR_DATAGRAM = 0,
 	VMCI_INTR_NOTIFICATION = 1,
+	VMCI_INTR_DMA_DATAGRAM = 2,
 };
 
 /*
@@ -83,6 +99,52 @@ enum {
 #define VMCI_MAX_PINNED_QP_MEMORY ((size_t)(32 * 1024))
 
 /*
+ * The version of the VMCI device that supports MMIO access to registers
+ * requests 256KB for BAR1 whereas the version of VMCI that supports
+ * MSI/MSI-X only requests 8KB. The layout of the larger 256KB region is:
+ * - the first 128KB are used for MSI/MSI-X.
+ * - the following 64KB are used for MMIO register access.
+ * - the remaining 64KB are unused.
+ */
+#define VMCI_WITH_MMIO_ACCESS_BAR_SIZE ((size_t)(256 * 1024))
+#define VMCI_MMIO_ACCESS_OFFSET        ((size_t)(128 * 1024))
+#define VMCI_MMIO_ACCESS_SIZE          ((size_t)(64 * 1024))
+
+/*
+ * For VMCI devices supporting the VMCI_CAPS_DMA_DATAGRAM capability, the
+ * sending and receiving of datagrams can be performed using DMA to/from
+ * a driver allocated buffer.
+ * Sending and receiving will be handled as follows:
+ * - when sending datagrams, the driver initializes the buffer where the
+ *   data part will refer to the outgoing VMCI datagram, sets the busy flag
+ *   to 1 and writes the address of the buffer to VMCI_DATA_OUT_HIGH_ADDR
+ *   and VMCI_DATA_OUT_LOW_ADDR. Writing to VMCI_DATA_OUT_LOW_ADDR triggers
+ *   the device processing of the buffer. When the device has processed the
+ *   buffer, it will write the result value to the buffer and then clear the
+ *   busy flag.
+ * - when receiving datagrams, the driver initializes the buffer where the
+ *   data part will describe the receive buffer, clears the busy flag and
+ *   writes the address of the buffer to VMCI_DATA_IN_HIGH_ADDR and
+ *   VMCI_DATA_IN_LOW_ADDR. Writing to VMCI_DATA_IN_LOW_ADDR triggers the
+ *   device processing of the buffer. The device will copy as many available
+ *   datagrams into the buffer as possible, and then sets the busy flag.
+ *   When the busy flag is set, the driver will process the datagrams in the
+ *   buffer.
+ */
+struct vmci_data_in_out_header {
+	uint32_t busy;
+	uint32_t opcode;
+	uint32_t size;
+	uint32_t rsvd;
+	uint64_t result;
+};
+
+struct vmci_sg_elem {
+	uint64_t addr;
+	uint64_t size;
+};
+
+/*
  * We have a fixed set of resource IDs available in the VMX.
  * This allows us to have a very simple implementation since we statically
  * know how many will create datagram handles. If a new caller arrives and