Merge tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The diffstat for this release is dominated by the new Airoha driver,
  mainly as a result of this being a generally quite quiet release.
  There were a couple of cleanups in the core but nothing substantial,
  the updates here are almost all driver specific ones.

   - Support for multi-word mode in the OMAP2 McSPI driver

   - Overhaul of the PXA2xx driver, mostly API updates

   - A number of DT binding conversions

   - Support for Airoha NAND controllers, Cirrus Logic CS35L56, Mobileye
     EYEQ5 and Renesas R8A779H0"

* tag 'spi-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits)
  spi: dw: Bail out early on unsupported target mode
  spi: Remove unneded check for orig_nents
  MAINTAINERS: repair file entry in AIROHA SPI SNFI DRIVER
  spi: pxa2xx: Drop the stale entry in documentation TOC
  spi: pxa2xx: Don't provide struct chip_data for others
  spi: pxa2xx: Remove timeout field from struct chip_data
  spi: pxa2xx: Remove DMA parameters from struct chip_data
  spi: pxa2xx: Drop struct pxa2xx_spi_chip
  spi: pxa2xx: Don't use "proxy" headers
  spi: pxa2xx: Remove outdated documentation
  spi: pxa2xx: Move contents of linux/spi/pxa2xx_spi.h to a local one
  spi: pxa2xx: Provide num-cs for Sharp PDAs via device properties
  spi: pxa2xx: Allow number of chip select pins to be read from property
  spi: dt-bindings: ti,qspi: convert to dtschema
  spi: bitbang: Add missing MODULE_DESCRIPTION()
  spi: bitbang: Use NSEC_PER_*SEC rather than hard coding
  spi: dw: Drop default number of CS setting
  spi: dw: Convert dw_spi::num_cs to u32
  spi: dw: Add a number of native CS auto-detection
  spi: dw: Convert to using BITS_TO_BYTES() macro
  ...

7 files changed, 18 insertions, 91 deletions

diff --git a/include/linux/gpio/property.h b/include/linux/gpio/property.h
index 1a14e239221f..0d2209308002 100644
--- a/include/linux/gpio/property.h
+++ b/include/linux/gpio/property.h
@@ -4,7 +4,11 @@
 
 #include <linux/property.h>
 
+struct software_node;
+
 #define PROPERTY_ENTRY_GPIO(_name_, _chip_node_, _idx_, _flags_) \
 	PROPERTY_ENTRY_REF(_name_, _chip_node_, _idx_, _flags_)
 
+extern const struct software_node swnode_gpio_undefined;
+
 #endif /* __LINUX_GPIO_PROPERTY_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index 3b400b1919a9..9e3c15b4ac91 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -16,9 +16,6 @@ struct omap2_mcspi_platform_config {
 
 struct omap2_mcspi_device_config {
 	unsigned turbo_mode:1;
-
-	/* toggle chip select after every word */
-	unsigned cs_per_word:1;
 };
 
 #endif
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index cd1973e6ac4b..844a2743ca94 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -217,9 +217,9 @@ enum pxa_ssp_type {
 	PXA27x_SSP,
 	PXA3xx_SSP,
 	PXA168_SSP,
-	MMP2_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
+	MMP2_SSP,
 	MRFLD_SSP,
 	QUARK_X1000_SSP,
 	/* Keep LPSS types sorted with lpss_platforms[] */
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
deleted file mode 100644
index ca2cd4e30ead..000000000000
--- a/include/linux/spi/pxa2xx_spi.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- */
-#ifndef __LINUX_SPI_PXA2XX_SPI_H
-#define __LINUX_SPI_PXA2XX_SPI_H
-
-#include <linux/dmaengine.h>
-#include <linux/types.h>
-
-#include <linux/pxa2xx_ssp.h>
-
-struct dma_chan;
-
-/*
- * The platform data for SSP controller devices
- * (resides in device.platform_data).
- */
-struct pxa2xx_spi_controller {
-	u16 num_chipselect;
-	u8 enable_dma;
-	u8 dma_burst_size;
-	bool is_target;
-
-	/* DMA engine specific config */
-	dma_filter_fn dma_filter;
-	void *tx_param;
-	void *rx_param;
-
-	/* For non-PXA arches */
-	struct ssp_device ssp;
-};
-
-/*
- * The controller specific data for SPI target devices
- * (resides in spi_board_info.controller_data),
- * copied to spi_device.platform_data ... mostly for
- * DMA tuning.
- */
-struct pxa2xx_spi_chip {
-	u8 tx_threshold;
-	u8 tx_hi_threshold;
-	u8 rx_threshold;
-	u8 dma_burst_size;
-	u32 timeout;
-};
-
-#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
-
-#include <linux/clk.h>
-
-extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info);
-
-#endif
-
-#endif	/* __LINUX_SPI_PXA2XX_SPI_H */
diff --git a/include/linux/spi/rspi.h b/include/linux/spi/rspi.h
deleted file mode 100644
index dbdfcc7a3db2..000000000000
--- a/include/linux/spi/rspi.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Renesas SPI driver
- *
- * Copyright (C) 2012  Renesas Solutions Corp.
- */
-
-#ifndef __LINUX_SPI_RENESAS_SPI_H__
-#define __LINUX_SPI_RENESAS_SPI_H__
-
-struct rspi_plat_data {
-	unsigned int dma_tx_id;
-	unsigned int dma_rx_id;
-
-	u16 num_chipselect;
-};
-
-#endif
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index c459809efee4..e8e1e798924f 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -453,6 +453,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
  * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
  *           selected
+ * @last_cs_index_mask: bit mask the last chip selects that were used
  * @xfer_completion: used by core transfer_one_message()
  * @busy: message pump is busy
  * @running: message pump is running
@@ -955,8 +956,8 @@ struct spi_res {
  * struct spi_transfer - a read/write buffer pair
  * @tx_buf: data to be written (DMA-safe memory), or NULL
  * @rx_buf: data to be read (DMA-safe memory), or NULL
- * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
- * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
+ * @tx_dma: DMA address of tx_buf, currently not for client use
+ * @rx_dma: DMA address of rx_buf, currently not for client use
  * @tx_nbits: number of bits used for writing. If 0 the default
  *      (SPI_NBITS_SINGLE) is used.
  * @rx_nbits: number of bits used for reading. If 0 the default
@@ -1066,8 +1067,7 @@ struct spi_transfer {
 	/*
 	 * It's okay if tx_buf == rx_buf (right?).
 	 * For MicroWire, one buffer must be NULL.
-	 * Buffers must work with dma_*map_single() calls, unless
-	 * spi_message.is_dma_mapped reports a pre-existing mapping.
+	 * Buffers must work with dma_*map_single() calls.
 	 */
 	const void	*tx_buf;
 	void		*rx_buf;
@@ -1111,8 +1111,6 @@ struct spi_transfer {
  * struct spi_message - one multi-segment SPI transaction
  * @transfers: list of transfer segments in this transaction
  * @spi: SPI device to which the transaction is queued
- * @is_dma_mapped: if true, the caller provided both DMA and CPU virtual
- *	addresses for each transfer buffer
  * @pre_optimized: peripheral driver pre-optimized the message
  * @optimized: the message is in the optimized state
  * @prepared: spi_prepare_message was called for the this message
@@ -1146,8 +1144,6 @@ struct spi_message {
 
 	struct spi_device	*spi;
 
-	unsigned		is_dma_mapped:1;
-
 	/* spi_optimize_message() was called for this message */
 	bool			pre_optimized;
 	/* __spi_optimize_message() was called for this message */
diff --git a/include/linux/spi/xilinx_spi.h b/include/linux/spi/xilinx_spi.h
index 3934ce789d87..1b8d984668b6 100644
--- a/include/linux/spi/xilinx_spi.h
+++ b/include/linux/spi/xilinx_spi.h
@@ -2,19 +2,23 @@
 #ifndef __LINUX_SPI_XILINX_SPI_H
 #define __LINUX_SPI_XILINX_SPI_H
 
+#include <linux/types.h>
+
+struct spi_board_info;
+
 /**
  * struct xspi_platform_data - Platform data of the Xilinx SPI driver
- * @num_chipselect:	Number of chip select by the IP.
- * @little_endian:	If registers should be accessed little endian or not.
- * @bits_per_word:	Number of bits per word.
  * @devices:		Devices to add when the driver is probed.
  * @num_devices:	Number of devices in the devices array.
+ * @num_chipselect:	Number of chip select by the IP.
+ * @bits_per_word:	Number of bits per word.
+ * @force_irq:		If set, forces QSPI transaction requirements.
  */
 struct xspi_platform_data {
-	u16 num_chipselect;
-	u8 bits_per_word;
 	struct spi_board_info *devices;
 	u8 num_devices;
+	u8 num_chipselect;
+	u8 bits_per_word;
 	bool force_irq;
 };