diff options
author | 2022-03-25 13:35:34 -0700 | |
---|---|---|
committer | 2022-03-25 13:35:34 -0700 | |
commit | e35a4a4e13c35f500a8d38e836b5e335c7515494 (patch) | |
tree | 32940f68475c16ddee8ed2933c9a4ae6e9b44265 /include/linux | |
parent | Merge tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/li... (diff) | |
parent | Merge tag 'nand/for-5.18' into mtd/next (diff) | |
download | linux-e35a4a4e13c35f500a8d38e836b5e335c7515494.tar.gz linux-e35a4a4e13c35f500a8d38e836b5e335c7515494.tar.bz2 linux-e35a4a4e13c35f500a8d38e836b5e335c7515494.zip |
Merge tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"There has been a lot of activity in the MTD subsystem recently, with a
number of SPI-NOR cleanups as well as the introduction of ECC engines
that can be used by SPI controllers (hence a few SPI patches in here).
Core MTD changes:
- Replace the expert mode symbols with a single helper
- Fix misuses of of_match_ptr()
- Remove partid and partname debugfs files
- tests: Fix eraseblock read speed miscalculation for lower partition
sizes
- TRX parser: Allow to use on MediaTek MIPS SoCs
MTD driver changes:
- spear_smi: use GFP_KERNEL
- mchp48l640: Add SPI ID table
- mchp23k256: Add SPI ID table
- blkdevs: Avoid soft lockups with some mtd/spi devices
- aspeed-smc: Improve probe resilience
Hyperbus changes:
- HBMC_AM654 should depend on ARCH_K3
NAND core changes:
- ECC:
- Add infrastructure to support hardware engines
- Add a new helper to retrieve the ECC context
- Provide a helper to retrieve a pilelined engine device
NAND-ECC changes:
- Macronix ECC engine:
- Add Macronix external ECC engine support
- Support SPI pipelined mode
- Make two read-only arrays static const
- Fix compile test issue
Raw NAND core changes:
- Fix misuses of of_match_node()
- Rework of_get_nand_bus_width()
- Remove of_get_nand_on_flash_bbt() wrapper
- Protect access to rawnand devices while in suspend
- bindings: Document the wp-gpios property
Rax NAND controller driver changes:
- atmel: Fix refcount issue in atmel_nand_controller_init
- nandsim:
- Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
- Merge repeat codes in ns_switch_state
- Replace overflow check with kzalloc to single kcalloc
- rockchip: Fix platform_get_irq.cocci warning
- stm32_fmc2: Add NAND Write Protect support
- pl353: Set the nand chip node as the flash node
- brcmnand: Fix sparse warnings in bcma_nand
- omap_elm: Remove redundant variable 'errors'
- gpmi:
- Support fast edo timings for mx28
- Validate controller clock rate
- Fix controller timings setting
- brcmnand:
- Add BCMA shim
- BCMA controller uses command shift of 0
- Allow platform data instantation
- Add platform data structure for BCMA
- Allow working without interrupts
- Move OF operations out of brcmnand_init_cs()
- Avoid pdev in brcmnand_init_cs()
- Allow SoC to provide I/O operations
- Assign soc as early as possible
Onenand changes:
- Check for error irq
SPI-NAND core changes:
- Delay a little bit the dirmap creation
- Create direct mapping descriptors for ECC operations
SPI-NAND driver changes:
- macronix: Use random program load
SPI NOR core changes:
- Move vendor specific code out of the core into vendor drivers.
- Unify all function and object names in the vendor modules.
- Make setup() callback optional to improve readability.
- Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
SPI changes:
- Macronix SPI controller:
- Fix the transmit path
- Create a helper to configure the controller before an operation
- Create a helper to ease the start of an operation
- Add support for direct mapping
- Add support for pipelined ECC operations
- spi-mem:
- Introduce a capability structure
- Check the controller extra capabilities
- cadence-quadspi/mxic: Provide capability structures
- Kill the spi_mem_dtr_supports_op() helper
- Add an ecc parameter to the spi_mem_op structure
Binding changes:
- Dropped mtd/cortina,gemini-flash.txt
- Convert BCM47xx partitions to json-schema
- Vendor prefixes: Clarify Macronix prefix
- SPI NAND: Convert spi-nand description file to yaml
- Raw NAND chip: Create a NAND chip description
- Raw NAND controller:
- Harmonize the property types
- Fix a comment in the examples
- Fix the reg property description
- Describe Macronix NAND ECC engine
- Macronix SPI controller:
- Document the nand-ecc-engine property
- Convert to yaml
- The interrupt property is not mandatory"
* tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits)
mtd: nand: ecc: mxic: Fix compile test issue
mtd: nand: mxic-ecc: make two read-only arrays static const
mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3
mtd: core: Remove partid and partname debugfs files
dt-bindings: mtd: partitions: convert BCM47xx to the json-schema
mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes
mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
mtd: rawnand: rockchip: fix platform_get_irq.cocci warning
mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set
mtd: spi-nor: renumber flags
mtd: spi-nor: slightly change code style in spi_nor_sr_ready()
mtd: spi-nor: spansion: rename vendor specific functions and defines
mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag
mtd: spi-nor: move all spansion specifics into spansion.c
mtd: spi-nor: spansion: slightly rework control flow in late_init()
mtd: spi-nor: micron-st: rename vendor specific functions and defines
mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag
mtd: spi-nor: move all micron-st specifics into micron-st.c
mtd: spi-nor: xilinx: correct the debug message
mtd: spi-nor: xilinx: rename vendor specific functions and defines
...
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 5 | ||||
-rw-r--r-- | include/linux/mtd/mtd.h | 11 | ||||
-rw-r--r-- | include/linux/mtd/nand-ecc-mxic.h | 49 | ||||
-rw-r--r-- | include/linux/mtd/nand.h | 49 | ||||
-rw-r--r-- | include/linux/mtd/rawnand.h | 2 | ||||
-rw-r--r-- | include/linux/mtd/spi-nor.h | 18 | ||||
-rw-r--r-- | include/linux/mtd/spinand.h | 2 | ||||
-rw-r--r-- | include/linux/platform_data/brcmnand.h | 12 | ||||
-rw-r--r-- | include/linux/spi/spi-mem.h | 26 | ||||
-rw-r--r-- | include/linux/spi/spi.h | 3 |
10 files changed, 143 insertions, 34 deletions
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index d35b9206096d..e3314f746bfa 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -3,6 +3,7 @@ #define LINUX_BCMA_DRIVER_CC_H_ #include <linux/platform_device.h> +#include <linux/platform_data/brcmnand.h> #include <linux/gpio.h> /** ChipCommon core registers. **/ @@ -599,6 +600,10 @@ struct bcma_sflash { #ifdef CONFIG_BCMA_NFLASH struct bcma_nflash { + /* Must be the fist member for the brcmnand driver to + * de-reference that structure. + */ + struct brcmnand_platform_data brcmnand_info; bool present; bool boot; /* This is the flash the SoC boots from */ }; diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 1ffa933121f6..151607e9d64a 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -188,9 +188,6 @@ struct module; /* only needed for owner field in mtd_info */ */ struct mtd_debug_info { struct dentry *dfs_dir; - - const char *partname; - const char *partid; }; /** @@ -711,7 +708,11 @@ static inline int mtd_is_bitflip_or_eccerr(int err) { unsigned mtd_mmap_capabilities(struct mtd_info *mtd); -extern char *mtd_expert_analysis_warning; -extern bool mtd_expert_analysis_mode; +#ifdef CONFIG_DEBUG_FS +bool mtd_check_expert_analysis_mode(void); +#else +static inline bool mtd_check_expert_analysis_mode(void) { return false; } +#endif + #endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand-ecc-mxic.h b/include/linux/mtd/nand-ecc-mxic.h new file mode 100644 index 000000000000..b125926e458c --- /dev/null +++ b/include/linux/mtd/nand-ecc-mxic.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright © 2019 Macronix + * Author: Miquèl Raynal <miquel.raynal@bootlin.com> + * + * Header for the Macronix external ECC engine. + */ + +#ifndef __MTD_NAND_ECC_MXIC_H__ +#define __MTD_NAND_ECC_MXIC_H__ + +#include <linux/platform_device.h> +#include <linux/device.h> + +struct mxic_ecc_engine; + +#if IS_ENABLED(CONFIG_MTD_NAND_ECC_MXIC) && IS_REACHABLE(CONFIG_MTD_NAND_CORE) + +struct nand_ecc_engine_ops *mxic_ecc_get_pipelined_ops(void); +struct nand_ecc_engine *mxic_ecc_get_pipelined_engine(struct platform_device *spi_pdev); +void mxic_ecc_put_pipelined_engine(struct nand_ecc_engine *eng); +int mxic_ecc_process_data_pipelined(struct nand_ecc_engine *eng, + unsigned int direction, dma_addr_t dirmap); + +#else /* !CONFIG_MTD_NAND_ECC_MXIC */ + +static inline struct nand_ecc_engine_ops *mxic_ecc_get_pipelined_ops(void) +{ + return NULL; +} + +static inline struct nand_ecc_engine * +mxic_ecc_get_pipelined_engine(struct platform_device *spi_pdev) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline void mxic_ecc_put_pipelined_engine(struct nand_ecc_engine *eng) {} + +static inline int mxic_ecc_process_data_pipelined(struct nand_ecc_engine *eng, + unsigned int direction, + dma_addr_t dirmap) +{ + return -EOPNOTSUPP; +} + +#endif /* CONFIG_MTD_NAND_ECC_MXIC */ + +#endif /* __MTD_NAND_ECC_MXIC_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 32fc7edf65b3..c3693bb87b4c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -264,11 +264,35 @@ struct nand_ecc_engine_ops { }; /** + * enum nand_ecc_engine_integration - How the NAND ECC engine is integrated + * @NAND_ECC_ENGINE_INTEGRATION_INVALID: Invalid value + * @NAND_ECC_ENGINE_INTEGRATION_PIPELINED: Pipelined engine, performs on-the-fly + * correction, does not need to copy + * data around + * @NAND_ECC_ENGINE_INTEGRATION_EXTERNAL: External engine, needs to bring the + * data into its own area before use + */ +enum nand_ecc_engine_integration { + NAND_ECC_ENGINE_INTEGRATION_INVALID, + NAND_ECC_ENGINE_INTEGRATION_PIPELINED, + NAND_ECC_ENGINE_INTEGRATION_EXTERNAL, +}; + +/** * struct nand_ecc_engine - ECC engine abstraction for NAND devices + * @dev: Host device + * @node: Private field for registration time * @ops: ECC engine operations + * @integration: How the engine is integrated with the host + * (only relevant on %NAND_ECC_ENGINE_TYPE_ON_HOST engines) + * @priv: Private data */ struct nand_ecc_engine { + struct device *dev; + struct list_head node; struct nand_ecc_engine_ops *ops; + enum nand_ecc_engine_integration integration; + void *priv; }; void of_get_nand_ecc_user_config(struct nand_device *nand); @@ -279,8 +303,28 @@ int nand_ecc_prepare_io_req(struct nand_device *nand, int nand_ecc_finish_io_req(struct nand_device *nand, struct nand_page_io_req *req); bool nand_ecc_is_strong_enough(struct nand_device *nand); + +#if IS_REACHABLE(CONFIG_MTD_NAND_CORE) +int nand_ecc_register_on_host_hw_engine(struct nand_ecc_engine *engine); +int nand_ecc_unregister_on_host_hw_engine(struct nand_ecc_engine *engine); +#else +static inline int +nand_ecc_register_on_host_hw_engine(struct nand_ecc_engine *engine) +{ + return -ENOTSUPP; +} +static inline int +nand_ecc_unregister_on_host_hw_engine(struct nand_ecc_engine *engine) +{ + return -ENOTSUPP; +} +#endif + struct nand_ecc_engine *nand_ecc_get_sw_engine(struct nand_device *nand); struct nand_ecc_engine *nand_ecc_get_on_die_hw_engine(struct nand_device *nand); +struct nand_ecc_engine *nand_ecc_get_on_host_hw_engine(struct nand_device *nand); +void nand_ecc_put_on_host_hw_engine(struct nand_device *nand); +struct device *nand_ecc_get_engine_dev(struct device *host); #if IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_HAMMING) struct nand_ecc_engine *nand_ecc_sw_hamming_get_engine(void); @@ -962,6 +1006,11 @@ int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos); int nanddev_ecc_engine_init(struct nand_device *nand); void nanddev_ecc_engine_cleanup(struct nand_device *nand); +static inline void *nand_to_ecc_ctx(struct nand_device *nand) +{ + return nand->ecc.ctx.priv; +} + /* BBT related functions */ enum nand_bbt_block_status { NAND_BBT_BLOCK_STATUS_UNKNOWN, diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 5b88cd51fadb..dcf90144d70b 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -1240,6 +1240,7 @@ struct nand_secure_region { * @lock: Lock protecting the suspended field. Also used to serialize accesses * to the NAND device * @suspended: Set to 1 when the device is suspended, 0 when it's not + * @resume_wq: wait queue to sleep if rawnand is in suspended state. * @cur_cs: Currently selected target. -1 means no target selected, otherwise we * should always have cur_cs >= 0 && cur_cs < nanddev_ntargets(). * NAND Controller drivers should not modify this value, but they're @@ -1294,6 +1295,7 @@ struct nand_chip { /* Internals */ struct mutex lock; unsigned int suspended : 1; + wait_queue_head_t resume_wq; int cur_cs; int read_retries; struct nand_secure_region *secure_regions; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index fc90fce26e33..5e25a7b75ae2 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -47,8 +47,6 @@ #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ #define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ -#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ -#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ #define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */ #define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */ #define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */ @@ -86,22 +84,12 @@ #define SPINOR_OP_BP 0x02 /* Byte program */ #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */ -/* Used for S3AN flashes only */ -#define SPINOR_OP_XSE 0x50 /* Sector erase */ -#define SPINOR_OP_XPP 0x82 /* Page program */ -#define SPINOR_OP_XRDSR 0xd7 /* Read status register */ - -#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ -#define XSR_RDY BIT(7) /* Ready */ - - /* Used for Macronix and Winbond flashes. */ #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */ #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */ /* Used for Spansion flashes only. */ #define SPINOR_OP_BRWR 0x17 /* Bank register write */ -#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */ /* Used for Micron flashes only. */ #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ @@ -135,12 +123,6 @@ /* Enhanced Volatile Configuration Register bits */ #define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */ -/* Flag Status Register bits */ -#define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */ -#define FSR_E_ERR BIT(5) /* Erase operation status */ -#define FSR_P_ERR BIT(4) /* Program operation status */ -#define FSR_PT_ERR BIT(1) /* Protection error bit */ - /* Status Register 2 bits. */ #define SR2_QUAD_EN_BIT1 BIT(1) #define SR2_LB1 BIT(3) /* Security Register Lock Bit 1 */ diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 6988956b8492..3aa28240a77f 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -389,6 +389,8 @@ struct spinand_info { struct spinand_dirmap { struct spi_mem_dirmap_desc *wdesc; struct spi_mem_dirmap_desc *rdesc; + struct spi_mem_dirmap_desc *wdesc_ecc; + struct spi_mem_dirmap_desc *rdesc_ecc; }; /** diff --git a/include/linux/platform_data/brcmnand.h b/include/linux/platform_data/brcmnand.h new file mode 100644 index 000000000000..8b8777985dce --- /dev/null +++ b/include/linux/platform_data/brcmnand.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef BRCMNAND_PLAT_DATA_H +#define BRCMNAND_PLAT_DATA_H + +struct brcmnand_platform_data { + int chip_select; + const char * const *part_probe_types; + unsigned int ecc_stepsize; + unsigned int ecc_strength; +}; + +#endif /* BRCMNAND_PLAT_DATA_H */ diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 85e2ff7b840d..2ba044d0d5e5 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -89,6 +89,7 @@ enum spi_mem_data_dir { * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not * @data.buswidth: number of IO lanes used to send/receive the data * @data.dtr: whether the data should be sent in DTR mode or not + * @data.ecc: whether error correction is required or not * @data.dir: direction of the transfer * @data.nbytes: number of data bytes to send/receive. Can be zero if the * operation does not involve transferring data @@ -119,6 +120,7 @@ struct spi_mem_op { struct { u8 buswidth; u8 dtr : 1; + u8 ecc : 1; enum spi_mem_data_dir dir; unsigned int nbytes; union { @@ -286,6 +288,19 @@ struct spi_controller_mem_ops { }; /** + * struct spi_controller_mem_caps - SPI memory controller capabilities + * @dtr: Supports DTR operations + * @ecc: Supports operations with error correction + */ +struct spi_controller_mem_caps { + bool dtr; + bool ecc; +}; + +#define spi_mem_controller_is_capable(ctlr, cap) \ + ((ctlr)->mem_caps && (ctlr)->mem_caps->cap) + +/** * struct spi_mem_driver - SPI memory driver * @spidrv: inherit from a SPI driver * @probe: probe a SPI memory. Usually where detection/initialization takes @@ -319,10 +334,6 @@ void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr, bool spi_mem_default_supports_op(struct spi_mem *mem, const struct spi_mem_op *op); - -bool spi_mem_dtr_supports_op(struct spi_mem *mem, - const struct spi_mem_op *op); - #else static inline int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr, @@ -345,13 +356,6 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, { return false; } - -static inline -bool spi_mem_dtr_supports_op(struct spi_mem *mem, - const struct spi_mem_op *op) -{ - return false; -} #endif /* CONFIG_SPI_MEM */ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 7d005fa4631c..5f8c063ddff4 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -24,6 +24,7 @@ struct ptp_system_timestamp; struct spi_controller; struct spi_transfer; struct spi_controller_mem_ops; +struct spi_controller_mem_caps; /* * INTERFACES between SPI master-side drivers and SPI slave protocol handlers, @@ -413,6 +414,7 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch * @mem_ops: optimized/dedicated operations for interactions with SPI memory. * This field is optional and should only be implemented if the * controller has native support for memory like operations. + * @mem_caps: controller capabilities for the handling of memory operations. * @unprepare_message: undo any work done by prepare_message(). * @slave_abort: abort the ongoing transfer request on an SPI slave controller * @cs_gpiods: Array of GPIO descs to use as chip select lines; one per CS @@ -632,6 +634,7 @@ struct spi_controller { /* Optimized handlers for SPI memory-like operations. */ const struct spi_controller_mem_ops *mem_ops; + const struct spi_controller_mem_caps *mem_caps; /* gpio chip select */ struct gpio_desc **cs_gpiods; |