Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

1) Allow to dump, monitor, and change the bridge multicast database
   using netlink.  From Cong Wang.

2) RFC 5961 TCP blind data injection attack mitigation, from Eric
   Dumazet.

3) Networking user namespace support from Eric W. Biederman.

4) tuntap/virtio-net multiqueue support by Jason Wang.

5) Support for checksum offload of encapsulated packets (basically,
   tunneled traffic can still be checksummed by HW).  From Joseph
   Gasparakis.

6) Allow BPF filter access to VLAN tags, from Eric Dumazet and
   Daniel Borkmann.

7) Bridge port parameters over netlink and BPDU blocking support
   from Stephen Hemminger.

8) Improve data access patterns during inet socket demux by rearranging
   socket layout, from Eric Dumazet.

9) TIPC protocol updates and cleanups from Ying Xue, Paul Gortmaker, and
   Jon Maloy.

10) Update TCP socket hash sizing to be more in line with current day
    realities.  The existing heurstics were choosen a decade ago.
    From Eric Dumazet.

11) Fix races, queue bloat, and excessive wakeups in ATM and
    associated drivers, from Krzysztof Mazur and David Woodhouse.

12) Support DOVE (Distributed Overlay Virtual Ethernet) extensions
    in VXLAN driver, from David Stevens.

13) Add "oops_only" mode to netconsole, from Amerigo Wang.

14) Support set and query of VEB/VEPA bridge mode via PF_BRIDGE, also
    allow DCB netlink to work on namespaces other than the initial
    namespace.  From John Fastabend.

15) Support PTP in the Tigon3 driver, from Matt Carlson.

16) tun/vhost zero copy fixes and improvements, plus turn it on
    by default, from Michael S. Tsirkin.

17) Support per-association statistics in SCTP, from Michele
    Baldessari.

And many, many, driver updates, cleanups, and improvements.  Too
numerous to mention individually.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  net/mlx4_en: Add support for destination MAC in steering rules
  net/mlx4_en: Use generic etherdevice.h functions.
  net: ethtool: Add destination MAC address to flow steering API
  bridge: add support of adding and deleting mdb entries
  bridge: notify mdb changes via netlink
  ndisc: Unexport ndisc_{build,send}_skb().
  uapi: add missing netconf.h to export list
  pkt_sched: avoid requeues if possible
  solos-pci: fix double-free of TX skb in DMA mode
  bnx2: Fix accidental reversions.
  bna: Driver Version Updated to 3.1.2.1
  bna: Firmware update
  bna: Add RX State
  bna: Rx Page Based Allocation
  bna: TX Intr Coalescing Fix
  bna: Tx and Rx Optimizations
  bna: Code Cleanup and Enhancements
  ath9k: check pdata variable before dereferencing it
  ath5k: RX timestamp is reported at end of frame
  ath9k_htc: RX timestamp is reported at end of frame
  ...

1 files changed, 257 insertions, 18 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 82558c8decf8..ee50c5eba50c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -144,6 +144,39 @@ struct ieee80211_low_level_stats {
 };
 
 /**
+ * enum ieee80211_chanctx_change - change flag for channel context
+ * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed
+ * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed
+ */
+enum ieee80211_chanctx_change {
+	IEEE80211_CHANCTX_CHANGE_WIDTH		= BIT(0),
+	IEEE80211_CHANCTX_CHANGE_RX_CHAINS	= BIT(1),
+};
+
+/**
+ * struct ieee80211_chanctx_conf - channel context that vifs may be tuned to
+ *
+ * This is the driver-visible part. The ieee80211_chanctx
+ * that contains it is visible in mac80211 only.
+ *
+ * @def: the channel definition
+ * @rx_chains_static: The number of RX chains that must always be
+ *	active on the channel to receive MIMO transmissions
+ * @rx_chains_dynamic: The number of RX chains that must be enabled
+ *	after RTS/CTS handshake to receive SMPS MIMO transmissions;
+ *	this will always be >= @rx_chains_static.
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *), size is determined in hw information.
+ */
+struct ieee80211_chanctx_conf {
+	struct cfg80211_chan_def def;
+
+	u8 rx_chains_static, rx_chains_dynamic;
+
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
  * enum ieee80211_bss_change - BSS change notification flags
  *
  * These flags are used with the bss_info_changed() callback
@@ -172,6 +205,9 @@ struct ieee80211_low_level_stats {
  * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode)
  * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode)
  * @BSS_CHANGED_PS: PS changed for this BSS (STA mode)
+ * @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
+ * @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
+ *	changed (currently only in P2P client mode, GO mode will be later)
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -192,6 +228,8 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_SSID		= 1<<15,
 	BSS_CHANGED_AP_PROBE_RESP	= 1<<16,
 	BSS_CHANGED_PS			= 1<<17,
+	BSS_CHANGED_TXPOWER		= 1<<18,
+	BSS_CHANGED_P2P_PS		= 1<<19,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -223,6 +261,7 @@ enum ieee80211_rssi_event {
  * @assoc: association status
  * @ibss_joined: indicates whether this station is part of an IBSS
  *	or not
+ * @ibss_creator: indicates if a new IBSS network is being created
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble;
@@ -247,9 +286,8 @@ enum ieee80211_rssi_event {
  * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  * @bssid: The BSSID for this BSS
  * @enable_beacon: whether beaconing should be enabled or not
- * @channel_type: Channel type for this BSS -- the hardware might be
- *	configured for HT40+ while this BSS only uses no-HT, for
- *	example.
+ * @chandef: Channel definition for this BSS -- the hardware might be
+ *	configured a higher bandwidth than this BSS uses, for example.
  * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
  *	This field is only valid when the channel type is one of the HT types.
  * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
@@ -273,11 +311,15 @@ enum ieee80211_rssi_event {
  * @ssid: The SSID of the current vif. Only valid in AP-mode.
  * @ssid_len: Length of SSID given in @ssid.
  * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode.
+ * @txpower: TX power in dBm
+ * @p2p_ctwindow: P2P CTWindow, only for P2P client interfaces
+ * @p2p_oppps: P2P opportunistic PS is enabled
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
 	/* association related data */
 	bool assoc, ibss_joined;
+	bool ibss_creator;
 	u16 aid;
 	/* erp related data */
 	bool use_cts_prot;
@@ -294,7 +336,7 @@ struct ieee80211_bss_conf {
 	u16 ht_operation_mode;
 	s32 cqm_rssi_thold;
 	u32 cqm_rssi_hyst;
-	enum nl80211_channel_type channel_type;
+	struct cfg80211_chan_def chandef;
 	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
 	u8 arp_addr_cnt;
 	bool arp_filter_enabled;
@@ -304,6 +346,9 @@ struct ieee80211_bss_conf {
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	size_t ssid_len;
 	bool hidden_ssid;
+	int txpower;
+	u8 p2p_ctwindow;
+	bool p2p_oppps;
 };
 
 /**
@@ -454,9 +499,14 @@ enum mac80211_tx_control_flags {
  *	This is set if the current BSS requires ERP protection.
  * @IEEE80211_TX_RC_USE_SHORT_PREAMBLE: Use short preamble.
  * @IEEE80211_TX_RC_MCS: HT rate.
+ * @IEEE80211_TX_RC_VHT_MCS: VHT MCS rate, in this case the idx field is split
+ *	into a higher 4 bits (Nss) and lower 4 bits (MCS number)
  * @IEEE80211_TX_RC_GREEN_FIELD: Indicates whether this rate should be used in
  *	Greenfield mode.
  * @IEEE80211_TX_RC_40_MHZ_WIDTH: Indicates if the Channel Width should be 40 MHz.
+ * @IEEE80211_TX_RC_80_MHZ_WIDTH: Indicates 80 MHz transmission
+ * @IEEE80211_TX_RC_160_MHZ_WIDTH: Indicates 160 MHz transmission
+ *	(80+80 isn't supported yet)
  * @IEEE80211_TX_RC_DUP_DATA: The frame should be transmitted on both of the
  *	adjacent 20 MHz channels, if the current channel type is
  *	NL80211_CHAN_HT40MINUS or NL80211_CHAN_HT40PLUS.
@@ -467,12 +517,15 @@ enum mac80211_rate_control_flags {
 	IEEE80211_TX_RC_USE_CTS_PROTECT		= BIT(1),
 	IEEE80211_TX_RC_USE_SHORT_PREAMBLE	= BIT(2),
 
-	/* rate index is an MCS rate number instead of an index */
+	/* rate index is an HT/VHT MCS instead of an index */
 	IEEE80211_TX_RC_MCS			= BIT(3),
 	IEEE80211_TX_RC_GREEN_FIELD		= BIT(4),
 	IEEE80211_TX_RC_40_MHZ_WIDTH		= BIT(5),
 	IEEE80211_TX_RC_DUP_DATA		= BIT(6),
 	IEEE80211_TX_RC_SHORT_GI		= BIT(7),
+	IEEE80211_TX_RC_VHT_MCS			= BIT(8),
+	IEEE80211_TX_RC_80_MHZ_WIDTH		= BIT(9),
+	IEEE80211_TX_RC_160_MHZ_WIDTH		= BIT(10),
 };
 
 
@@ -515,10 +568,32 @@ enum mac80211_rate_control_flags {
  */
 struct ieee80211_tx_rate {
 	s8 idx;
-	u8 count;
-	u8 flags;
+	u16 count:5,
+	    flags:11;
 } __packed;
 
+#define IEEE80211_MAX_TX_RETRY		31
+
+static inline void ieee80211_rate_set_vht(struct ieee80211_tx_rate *rate,
+					  u8 mcs, u8 nss)
+{
+	WARN_ON(mcs & ~0xF);
+	WARN_ON(nss & ~0x7);
+	rate->idx = (nss << 4) | mcs;
+}
+
+static inline u8
+ieee80211_rate_get_vht_mcs(const struct ieee80211_tx_rate *rate)
+{
+	return rate->idx & 0xF;
+}
+
+static inline u8
+ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
+{
+	return rate->idx >> 4;
+}
+
 /**
  * struct ieee80211_tx_info - skb transmit information
  *
@@ -663,13 +738,20 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	the frame.
  * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
  *	the frame.
- * @RX_FLAG_MACTIME_MPDU: The timestamp passed in the RX status (@mactime
+ * @RX_FLAG_MACTIME_START: The timestamp passed in the RX status (@mactime
  *	field) is valid and contains the time the first symbol of the MPDU
  *	was received. This is useful in monitor mode and for proper IBSS
  *	merging.
+ * @RX_FLAG_MACTIME_END: The timestamp passed in the RX status (@mactime
+ *	field) is valid and contains the time the last symbol of the MPDU
+ *	(including FCS) was received.
  * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
  * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
+ * @RX_FLAG_VHT: VHT MCS was used and rate_index is MCS index
  * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
+ * @RX_FLAG_80MHZ: 80 MHz was used
+ * @RX_FLAG_80P80MHZ: 80+80 MHz was used
+ * @RX_FLAG_160MHZ: 160 MHz was used
  * @RX_FLAG_SHORT_GI: Short guard interval was used
  * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present.
  *	Valid only for data frames (mainly A-MPDU)
@@ -697,7 +779,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_IV_STRIPPED		= BIT(4),
 	RX_FLAG_FAILED_FCS_CRC		= BIT(5),
 	RX_FLAG_FAILED_PLCP_CRC 	= BIT(6),
-	RX_FLAG_MACTIME_MPDU		= BIT(7),
+	RX_FLAG_MACTIME_START		= BIT(7),
 	RX_FLAG_SHORTPRE		= BIT(8),
 	RX_FLAG_HT			= BIT(9),
 	RX_FLAG_40MHZ			= BIT(10),
@@ -711,6 +793,11 @@ enum mac80211_rx_flags {
 	RX_FLAG_AMPDU_IS_LAST		= BIT(18),
 	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(19),
 	RX_FLAG_AMPDU_DELIM_CRC_KNOWN	= BIT(20),
+	RX_FLAG_MACTIME_END		= BIT(21),
+	RX_FLAG_VHT			= BIT(22),
+	RX_FLAG_80MHZ			= BIT(23),
+	RX_FLAG_80P80MHZ		= BIT(24),
+	RX_FLAG_160MHZ			= BIT(25),
 };
 
 /**
@@ -731,25 +818,39 @@ enum mac80211_rx_flags {
  *	@IEEE80211_HW_SIGNAL_*
  * @antenna: antenna used
  * @rate_idx: index of data rate into band's supported rates or MCS index if
- *	HT rates are use (RX_FLAG_HT)
+ *	HT or VHT is used (%RX_FLAG_HT/%RX_FLAG_VHT)
+ * @vht_nss: number of streams (VHT only)
  * @flag: %RX_FLAG_*
  * @rx_flags: internal RX flags for mac80211
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
  * @ampdu_delimiter_crc: A-MPDU delimiter CRC
+ * @vendor_radiotap_bitmap: radiotap vendor namespace presence bitmap
+ * @vendor_radiotap_len: radiotap vendor namespace length
+ * @vendor_radiotap_align: radiotap vendor namespace alignment. Note
+ *	that the actual data must be at the start of the SKB data
+ *	already.
+ * @vendor_radiotap_oui: radiotap vendor namespace OUI
+ * @vendor_radiotap_subns: radiotap vendor sub namespace
  */
 struct ieee80211_rx_status {
 	u64 mactime;
 	u32 device_timestamp;
 	u32 ampdu_reference;
 	u32 flag;
+	u32 vendor_radiotap_bitmap;
+	u16 vendor_radiotap_len;
 	u16 freq;
 	u8 rate_idx;
+	u8 vht_nss;
 	u8 rx_flags;
 	u8 band;
 	u8 antenna;
 	s8 signal;
 	u8 ampdu_delimiter_crc;
+	u8 vendor_radiotap_align;
+	u8 vendor_radiotap_oui[3];
+	u8 vendor_radiotap_subns;
 };
 
 /**
@@ -794,6 +895,8 @@ enum ieee80211_conf_flags {
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
  * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
  * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
+ *	Note that this is only valid if channel contexts are not used,
+ *	otherwise each channel context has the number of chains listed.
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_SMPS		= BIT(1),
@@ -845,7 +948,8 @@ enum ieee80211_smps_mode {
  *	powersave documentation below. This variable is valid only when
  *	the CONF_PS flag is set.
  *
- * @power_level: requested transmit power (in dBm)
+ * @power_level: requested transmit power (in dBm), backward compatibility
+ *	value only that is set to the minimum of all interfaces
  *
  * @channel: the channel to tune to
  * @channel_type: the channel (HT) type
@@ -859,7 +963,9 @@ enum ieee80211_smps_mode {
  *
  * @smps_mode: spatial multiplexing powersave mode; note that
  *	%IEEE80211_SMPS_STATIC is used when the device is not
- *	configured for an HT channel
+ *	configured for an HT channel.
+ *	Note that this is only valid if channel contexts are not used,
+ *	otherwise each channel context has the number of chains listed.
  */
 struct ieee80211_conf {
 	u32 flags;
@@ -931,6 +1037,11 @@ enum ieee80211_vif_flags {
  *	at runtime, mac80211 will never touch this field
  * @hw_queue: hardware queue for each AC
  * @cab_queue: content-after-beacon (DTIM beacon really) queue, AP mode only
+ * @chanctx_conf: The channel context this interface is assigned to, or %NULL
+ *	when it is not assigned. This pointer is RCU-protected due to the TX
+ *	path needing to access it; even though the netdev carrier will always
+ *	be off when it is %NULL there can still be races and packets could be
+ *	processed after it switches back to %NULL.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *).
  */
@@ -943,6 +1054,8 @@ struct ieee80211_vif {
 	u8 cab_queue;
 	u8 hw_queue[IEEE80211_NUM_ACS];
 
+	struct ieee80211_chanctx_conf __rcu *chanctx_conf;
+
 	u32 driver_flags;
 
 	/* must be last */
@@ -1076,6 +1189,8 @@ enum ieee80211_sta_state {
  * @aid: AID we assigned to the station if we're an AP
  * @supp_rates: Bitmap of supported rates (per band)
  * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
+ * @vht_cap: VHT capabilities of this STA; Not restricting any capabilities
+ * 	of remote STA. Taking as is.
  * @wme: indicates whether the STA supports WME. Only valid during AP-mode.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
@@ -1088,6 +1203,7 @@ struct ieee80211_sta {
 	u8 addr[ETH_ALEN];
 	u16 aid;
 	struct ieee80211_sta_ht_cap ht_cap;
+	struct ieee80211_sta_vht_cap vht_cap;
 	bool wme;
 	u8 uapsd_queues;
 	u8 max_sp;
@@ -1253,6 +1369,10 @@ struct ieee80211_tx_control {
  * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any
  *	P2P Interface. This will be honoured even if more than one interface
  *	is supported.
+ *
+ * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
+ *	should be tear down once BAR frame will not be acked.
+ *
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1281,6 +1401,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TX_AMPDU_SETUP_IN_HW		= 1<<23,
 	IEEE80211_HW_SCAN_WHILE_IDLE			= 1<<24,
 	IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF		= 1<<25,
+	IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL		= 1<<26,
 };
 
 /**
@@ -1325,6 +1446,8 @@ enum ieee80211_hw_flags {
  *	within &struct ieee80211_vif.
  * @sta_data_size: size (in bytes) of the drv_priv data area
  *	within &struct ieee80211_sta.
+ * @chanctx_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_chanctx_conf.
  *
  * @max_rates: maximum number of alternate rate retry stages the hw
  *	can handle.
@@ -1355,6 +1478,10 @@ enum ieee80211_hw_flags {
  *	include _FMT. Use %IEEE80211_RADIOTAP_MCS_HAVE_* values, only
  *	adding _BW is supported today.
  *
+ * @radiotap_vht_details: lists which VHT MCS information the HW reports,
+ *	the default is _GI | _BANDWIDTH.
+ *	Use the %IEEE80211_RADIOTAP_VHT_KNOWN_* values.
+ *
  * @netdev_features: netdev features to be set in each netdev created
  *	from this HW. Note only HW checksum features are currently
  *	compatible with mac80211. Other feature bits will be rejected.
@@ -1369,6 +1496,7 @@ struct ieee80211_hw {
 	int channel_change_time;
 	int vif_data_size;
 	int sta_data_size;
+	int chanctx_data_size;
 	int napi_weight;
 	u16 queues;
 	u16 max_listen_interval;
@@ -1380,6 +1508,7 @@ struct ieee80211_hw {
 	u8 max_tx_aggregation_subframes;
 	u8 offchannel_tx_hw_queue;
 	u8 radiotap_mcs_details;
+	u16 radiotap_vht_details;
 	netdev_features_t netdev_features;
 };
 
@@ -2126,6 +2255,14 @@ enum ieee80211_rate_control_changed {
  * @sta_remove: Notifies low level driver about removal of an associated
  *	station, AP, IBSS/WDS/mesh peer etc. This callback can sleep.
  *
+ * @sta_add_debugfs: Drivers can use this callback to add debugfs files
+ *	when a station is added to mac80211's station list. This callback
+ *	and @sta_remove_debugfs should be within a CONFIG_MAC80211_DEBUGFS
+ *	conditional. This callback can sleep.
+ *
+ * @sta_remove_debugfs: Remove the debugfs files which were added using
+ *	@sta_add_debugfs. This callback can sleep.
+ *
  * @sta_notify: Notifies low level driver about power state transition of an
  *	associated station, AP,  IBSS/WDS/mesh peer etc. For a VIF operating
  *	in AP mode, this callback will not be called when the flag
@@ -2317,6 +2454,27 @@ enum ieee80211_rate_control_changed {
  *	The callback will be called before each transmission and upon return
  *	mac80211 will transmit the frame right away.
  *	The callback is optional and can (should!) sleep.
+ *
+ * @add_chanctx: Notifies device driver about new channel context creation.
+ * @remove_chanctx: Notifies device driver about channel context destruction.
+ * @change_chanctx: Notifies device driver about channel context changes that
+ *	may happen when combining different virtual interfaces on the same
+ *	channel context with different settings
+ * @assign_vif_chanctx: Notifies device driver about channel context being bound
+ *	to vif. Possible use is for hw queue remapping.
+ * @unassign_vif_chanctx: Notifies device driver about channel context being
+ *	unbound from vif.
+ * @start_ap: Start operation on the AP interface, this is called after all the
+ *	information in bss_conf is set and beacon can be retrieved. A channel
+ *	context is bound before this is called. Note that if the driver uses
+ *	software scan or ROC, this (and @stop_ap) isn't called when the AP is
+ *	just "paused" for scanning/ROC, which is indicated by the beacon being
+ *	disabled/enabled via @bss_info_changed.
+ * @stop_ap: Stop operation on the AP interface.
+ *
+ * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
+ *	reconfiguration has completed. This can help the driver implement the
+ *	reconfiguration step. This callback may sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2342,6 +2500,9 @@ struct ieee80211_ops {
 				 struct ieee80211_bss_conf *info,
 				 u32 changed);
 
+	int (*start_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	void (*stop_ap)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+
 	u64 (*prepare_multicast)(struct ieee80211_hw *hw,
 				 struct netdev_hw_addr_list *mc_list);
 	void (*configure_filter)(struct ieee80211_hw *hw,
@@ -2383,6 +2544,16 @@ struct ieee80211_ops {
 		       struct ieee80211_sta *sta);
 	int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			  struct ieee80211_sta *sta);
+#ifdef CONFIG_MAC80211_DEBUGFS
+	void (*sta_add_debugfs)(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				struct dentry *dir);
+	void (*sta_remove_debugfs)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta,
+				   struct dentry *dir);
+#endif
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum sta_notify_cmd, struct ieee80211_sta *sta);
 	int (*sta_state)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -2424,8 +2595,8 @@ struct ieee80211_ops {
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
 
 	int (*remain_on_channel)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
 				 struct ieee80211_channel *chan,
-				 enum nl80211_channel_type channel_type,
 				 int duration);
 	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
 	int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
@@ -2461,6 +2632,22 @@ struct ieee80211_ops {
 
 	void	(*mgd_prepare_tx)(struct ieee80211_hw *hw,
 				  struct ieee80211_vif *vif);
+
+	int (*add_chanctx)(struct ieee80211_hw *hw,
+			   struct ieee80211_chanctx_conf *ctx);
+	void (*remove_chanctx)(struct ieee80211_hw *hw,
+			       struct ieee80211_chanctx_conf *ctx);
+	void (*change_chanctx)(struct ieee80211_hw *hw,
+			       struct ieee80211_chanctx_conf *ctx,
+			       u32 changed);
+	int (*assign_vif_chanctx)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_chanctx_conf *ctx);
+	void (*unassign_vif_chanctx)(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_chanctx_conf *ctx);
+
+	void (*restart_complete)(struct ieee80211_hw *hw);
 };
 
 /**
@@ -2962,8 +3149,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  * @ssid: SSID buffer
  * @ssid_len: length of SSID
- * @ie: buffer containing all IEs except SSID for the template
- * @ie_len: length of the IE buffer
+ * @tailroom: tailroom to reserve at end of SKB for IEs
  *
  * Creates a Probe Request template which can, for example, be uploaded to
  * hardware.
@@ -2971,7 +3157,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
 struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
 				       const u8 *ssid, size_t ssid_len,
-				       const u8 *ie, size_t ie_len);
+				       size_t tailroom);
 
 /**
  * ieee80211_rts_get - RTS frame generation function
@@ -3145,6 +3331,19 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
 			    struct sk_buff *skb, u8 *p2k);
 
 /**
+ * ieee80211_aes_cmac_calculate_k1_k2 - calculate the AES-CMAC sub keys
+ *
+ * This function computes the two AES-CMAC sub-keys, based on the
+ * previously installed master key.
+ *
+ * @keyconf: the parameter passed with the set key
+ * @k1: a buffer to be filled with the 1st sub-key
+ * @k2: a buffer to be filled with the 2nd sub-key
+ */
+void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
+					u8 *k1, u8 *k2);
+
+/**
  * struct ieee80211_key_seq - key sequence counter
  *
  * @tkip: TKIP data, containing IV32 and IV16 in host byte order
@@ -3294,6 +3493,21 @@ void ieee80211_sched_scan_results(struct ieee80211_hw *hw);
 void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
 
 /**
+ * enum ieee80211_interface_iteration_flags - interface iteration flags
+ * @IEEE80211_IFACE_ITER_NORMAL: Iterate over all interfaces that have
+ *	been added to the driver; However, note that during hardware
+ *	reconfiguration (after restart_hw) it will iterate over a new
+ *	interface and over all the existing interfaces even if they
+ *	haven't been re-added to the driver yet.
+ * @IEEE80211_IFACE_ITER_RESUME_ALL: During resume, iterate over all
+ *	interfaces, even if they haven't been re-added to the driver yet.
+ */
+enum ieee80211_interface_iteration_flags {
+	IEEE80211_IFACE_ITER_NORMAL	= 0,
+	IEEE80211_IFACE_ITER_RESUME_ALL	= BIT(0),
+};
+
+/**
  * ieee80211_iterate_active_interfaces - iterate active interfaces
  *
  * This function iterates over the interfaces associated with a given
@@ -3301,13 +3515,15 @@ void ieee80211_sched_scan_stopped(struct ieee80211_hw *hw);
  * This function allows the iterator function to sleep, when the iterator
  * function is atomic @ieee80211_iterate_active_interfaces_atomic can
  * be used.
- * Does not iterate over a new interface during add_interface()
+ * Does not iterate over a new interface during add_interface().
  *
  * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags
  * @iterator: the iterator function to call
  * @data: first argument of the iterator function
  */
 void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
+					 u32 iter_flags,
 					 void (*iterator)(void *data, u8 *mac,
 						struct ieee80211_vif *vif),
 					 void *data);
@@ -3319,13 +3535,15 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
  * hardware that are currently active and calls the callback for them.
  * This function requires the iterator callback function to be atomic,
  * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
- * Does not iterate over a new interface during add_interface()
+ * Does not iterate over a new interface during add_interface().
  *
  * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iter_flags: iteration flags, see &enum ieee80211_interface_iteration_flags
  * @iterator: the iterator function to call, cannot sleep
  * @data: first argument of the iterator function
  */
 void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+						u32 iter_flags,
 						void (*iterator)(void *data,
 						    u8 *mac,
 						    struct ieee80211_vif *vif),
@@ -3524,6 +3742,27 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw,
 			 void *iter_data);
 
 /**
+ * ieee80211_iter_chan_contexts_atomic - iterate channel contexts
+ * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @iter: iterator function
+ * @iter_data: data passed to iterator function
+ *
+ * Iterate all active channel contexts. This function is atomic and
+ * doesn't acquire any locks internally that might be held in other
+ * places while calling into the driver.
+ *
+ * The iterator will not find a context that's being added (during
+ * the driver callback to add it) but will find it while it's being
+ * removed.
+ */
+void ieee80211_iter_chan_contexts_atomic(
+	struct ieee80211_hw *hw,
+	void (*iter)(struct ieee80211_hw *hw,
+		     struct ieee80211_chanctx_conf *chanctx_conf,
+		     void *data),
+	void *iter_data);
+
+/**
  * ieee80211_ap_probereq_get - retrieve a Probe Request template
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.