diff options
author | 2020-09-21 03:10:30 +0300 | |
---|---|---|
committer | 2020-09-20 19:01:34 -0700 | |
commit | bbed0bbdddaf46260aeb1a8910a3b32941e321a2 (patch) | |
tree | e13632e7c3e6b1e41ed2826db7587314f72b5389 /net | |
parent | net: dsa: install VLANs into the master's RX filter too (diff) | |
download | linux-bbed0bbdddaf46260aeb1a8910a3b32941e321a2.tar.gz linux-bbed0bbdddaf46260aeb1a8910a3b32941e321a2.tar.bz2 linux-bbed0bbdddaf46260aeb1a8910a3b32941e321a2.zip |
net: dsa: tag_8021q: add VLANs to the master interface too
The whole purpose of tag_8021q is to send VLAN-tagged traffic to the
CPU, from which the driver can decode the source port and switch id.
Currently this only works if the VLAN filtering on the master is
disabled. Change that by explicitly adding code to tag_8021q.c to add
the VLANs corresponding to the tags to the filter of the master
interface.
Because we now need to call vlan_vid_add, then we also need to hold the
RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup
and modify the existing call sites as appropriate. Note that one call
path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering
-> sja1105_setup_8021q_tagging, was already holding this lock.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net')
-rw-r--r-- | net/dsa/tag_8021q.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 5baeb0893950..8e3e8a5b8559 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -215,7 +215,8 @@ static int dsa_8021q_setup_port(struct dsa_8021q_context *ctx, int port, int upstream = dsa_upstream_port(ctx->ds, port); u16 rx_vid = dsa_8021q_rx_vid(ctx->ds, port); u16 tx_vid = dsa_8021q_tx_vid(ctx->ds, port); - int i, err; + struct net_device *master; + int i, err, subvlan; /* The CPU port is implicitly configured by * configuring the front-panel ports @@ -223,6 +224,8 @@ static int dsa_8021q_setup_port(struct dsa_8021q_context *ctx, int port, if (!dsa_is_user_port(ctx->ds, port)) return 0; + master = dsa_to_port(ctx->ds, port)->cpu_dp->master; + /* Add this user port's RX VID to the membership list of all others * (including itself). This is so that bridging will not be hindered. * L2 forwarding rules still take precedence when there are no VLAN @@ -261,6 +264,19 @@ static int dsa_8021q_setup_port(struct dsa_8021q_context *ctx, int port, return err; } + /* Add to the master's RX filter not only @rx_vid, but in fact + * the entire subvlan range, just in case this DSA switch might + * want to use sub-VLANs. + */ + for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) { + u16 vid = dsa_8021q_rx_vid_subvlan(ctx->ds, port, subvlan); + + if (enabled) + vlan_vid_add(master, ctx->proto, vid); + else + vlan_vid_del(master, ctx->proto, vid); + } + /* Finally apply the TX VID on this port and on the CPU port */ err = dsa_8021q_vid_apply(ctx, port, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED, enabled); @@ -285,6 +301,8 @@ int dsa_8021q_setup(struct dsa_8021q_context *ctx, bool enabled) { int rc, port; + ASSERT_RTNL(); + for (port = 0; port < ctx->ds->num_ports; port++) { rc = dsa_8021q_setup_port(ctx, port, enabled); if (rc < 0) { |