diff options
author | 2020-12-03 22:06:04 -0500 | |
---|---|---|
committer | 2020-12-05 13:46:07 -0800 | |
commit | 205704c618af0ab2366015d2281a3b0814d918a0 (patch) | |
tree | 274c14874daa2beb22409d7022dd596fffca8bc0 /tools/testing/selftests | |
parent | can: softing: softing_netdev_open(): fix error handling (diff) | |
download | linux-205704c618af0ab2366015d2281a3b0814d918a0.tar.gz linux-205704c618af0ab2366015d2281a3b0814d918a0.tar.bz2 linux-205704c618af0ab2366015d2281a3b0814d918a0.zip |
vrf: packets with lladdr src needs dst at input with orig_iif when needs strict
Depending on the order of the routes to fe80::/64 are installed on the
VRF table, the NS for the source link-local address of the originator
might be sent to the wrong interface.
This patch ensures that packets with link-local addr source is doing a
lookup with the orig_iif when the destination addr indicates that it
is strict.
Add the reproducer as a use case in self test script fcnal-test.sh.
Fixes: b4869aa2f881 ("net: vrf: ipv6 support for local traffic to local addresses")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20201204030604.18828-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Diffstat (limited to 'tools/testing/selftests')
-rwxr-xr-x | tools/testing/selftests/net/fcnal-test.sh | 95 |
1 files changed, 95 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index fb5c55dd6df8..02b0b9ead40b 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -256,6 +256,28 @@ setup_cmd_nsb() fi } +setup_cmd_nsc() +{ + local cmd="$*" + local rc + + run_cmd_nsc ${cmd} + rc=$? + if [ $rc -ne 0 ]; then + # show user the command if not done so already + if [ "$VERBOSE" = "0" ]; then + echo "setup command: $cmd" + fi + echo "failed. stopping tests" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue" + read a + fi + exit $rc + fi +} + # set sysctl values in NS-A set_sysctl() { @@ -471,6 +493,36 @@ setup() sleep 1 } +setup_lla_only() +{ + # make sure we are starting with a clean slate + kill_procs + cleanup 2>/dev/null + + log_debug "Configuring network namespaces" + set -e + + create_ns ${NSA} "-" "-" + create_ns ${NSB} "-" "-" + create_ns ${NSC} "-" "-" + connect_ns ${NSA} ${NSA_DEV} "-" "-" \ + ${NSB} ${NSB_DEV} "-" "-" + connect_ns ${NSA} ${NSA_DEV2} "-" "-" \ + ${NSC} ${NSC_DEV} "-" "-" + + NSA_LINKIP6=$(get_linklocal ${NSA} ${NSA_DEV}) + NSB_LINKIP6=$(get_linklocal ${NSB} ${NSB_DEV}) + NSC_LINKIP6=$(get_linklocal ${NSC} ${NSC_DEV}) + + create_vrf ${NSA} ${VRF} ${VRF_TABLE} "-" "-" + ip -netns ${NSA} link set dev ${NSA_DEV} vrf ${VRF} + ip -netns ${NSA} link set dev ${NSA_DEV2} vrf ${VRF} + + set +e + + sleep 1 +} + ################################################################################ # IPv4 @@ -3787,10 +3839,53 @@ use_case_br() setup_cmd_nsb ip li del vlan100 2>/dev/null } +# VRF only. +# ns-A device is connected to both ns-B and ns-C on a single VRF but only has +# LLA on the interfaces +use_case_ping_lla_multi() +{ + setup_lla_only + # only want reply from ns-A + setup_cmd_nsb sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1 + setup_cmd_nsc sysctl -qw net.ipv6.icmp.echo_ignore_multicast=1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Pre cycle, ping out ns-B" + + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Pre cycle, ping out ns-C" + + # cycle/flap the first ns-A interface + setup_cmd ip link set ${NSA_DEV} down + setup_cmd ip link set ${NSA_DEV} up + sleep 1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-B" + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV}, ping out ns-C" + + # cycle/flap the second ns-A interface + setup_cmd ip link set ${NSA_DEV2} down + setup_cmd ip link set ${NSA_DEV2} up + sleep 1 + + log_start + run_cmd_nsb ping -c1 -w1 ${MCAST}%${NSB_DEV} + log_test_addr ${MCAST}%${NSB_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-B" + run_cmd_nsc ping -c1 -w1 ${MCAST}%${NSC_DEV} + log_test_addr ${MCAST}%${NSC_DEV} $? 0 "Post cycle ${NSA} ${NSA_DEV2}, ping out ns-C" +} + use_cases() { log_section "Use cases" + log_subsection "Device enslaved to bridge" use_case_br + log_subsection "Ping LLA with multiple interfaces" + use_case_ping_lla_multi } ################################################################################ |