aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/thermal/max77620_thermal.txt70
-rw-r--r--Documentation/devicetree/bindings/thermal/mediatek-thermal.txt4
-rw-r--r--Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt121
-rw-r--r--Documentation/devicetree/bindings/thermal/qcom-tsens.txt21
-rw-r--r--Documentation/thermal/sysfs-api.txt19
-rw-r--r--arch/arm/boot/dts/tegra124-jetson-tk1.dts18
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi83
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra132.dtsi119
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi127
-rw-r--r--drivers/acpi/thermal.c3
-rw-r--r--drivers/platform/x86/acerhdf.c2
-rw-r--r--drivers/regulator/max8973-regulator.c3
-rw-r--r--drivers/thermal/Kconfig37
-rw-r--r--drivers/thermal/Makefile4
-rw-r--r--drivers/thermal/cpu_cooling.c2
-rw-r--r--drivers/thermal/db8500_thermal.c2
-rw-r--r--drivers/thermal/devfreq_cooling.c2
-rw-r--r--drivers/thermal/gov_bang_bang.c2
-rw-r--r--drivers/thermal/hisi_thermal.c3
-rw-r--r--drivers/thermal/imx_thermal.c4
-rw-r--r--drivers/thermal/int340x_thermal/int3402_thermal.c3
-rw-r--r--drivers/thermal/int340x_thermal/int3403_thermal.c9
-rw-r--r--drivers/thermal/int340x_thermal/int340x_thermal_zone.c60
-rw-r--r--drivers/thermal/int340x_thermal/int340x_thermal_zone.h6
-rw-r--r--drivers/thermal/int340x_thermal/processor_thermal_device.c3
-rw-r--r--drivers/thermal/intel_bxt_pmic_thermal.c300
-rw-r--r--drivers/thermal/intel_soc_dts_iosf.c3
-rw-r--r--drivers/thermal/max77620_thermal.c166
-rw-r--r--drivers/thermal/mtk_thermal.c226
-rw-r--r--drivers/thermal/of-thermal.c46
-rw-r--r--drivers/thermal/qcom-spmi-temp-alarm.c2
-rw-r--r--drivers/thermal/qcom/Kconfig11
-rw-r--r--drivers/thermal/qcom/Makefile2
-rw-r--r--drivers/thermal/qcom/tsens-8916.c113
-rw-r--r--drivers/thermal/qcom/tsens-8960.c292
-rw-r--r--drivers/thermal/qcom/tsens-8974.c244
-rw-r--r--drivers/thermal/qcom/tsens-8996.c84
-rw-r--r--drivers/thermal/qcom/tsens-common.c141
-rw-r--r--drivers/thermal/qcom/tsens.c200
-rw-r--r--drivers/thermal/qcom/tsens.h94
-rw-r--r--drivers/thermal/qoriq_thermal.c328
-rw-r--r--drivers/thermal/rcar_thermal.c26
-rw-r--r--drivers/thermal/rockchip_thermal.c107
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c2
-rw-r--r--drivers/thermal/st/st_thermal_memmap.c3
-rw-r--r--drivers/thermal/tango_thermal.c19
-rw-r--r--drivers/thermal/tegra/soctherm.c842
-rw-r--r--drivers/thermal/tegra/soctherm.h10
-rw-r--r--drivers/thermal/tegra/tegra124-soctherm.c18
-rw-r--r--drivers/thermal/tegra/tegra132-soctherm.c18
-rw-r--r--drivers/thermal/tegra/tegra210-soctherm.c18
-rw-r--r--drivers/thermal/thermal_core.c106
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c29
-rw-r--r--drivers/thermal/user_space.c15
-rw-r--r--drivers/thermal/x86_pkg_temp_thermal.c3
-rw-r--r--include/dt-bindings/thermal/tegra124-soctherm.h5
-rw-r--r--include/linux/thermal.h43
57 files changed, 4021 insertions, 222 deletions
diff --git a/Documentation/devicetree/bindings/thermal/max77620_thermal.txt b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
new file mode 100644
index 000000000000..323a3b3822aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/max77620_thermal.txt
@@ -0,0 +1,70 @@
+Thermal driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Maxim Semiconductor MAX77620 supports alarm interrupts when its
+die temperature crosses 120C and 140C. These threshold temperatures
+are not configurable. Device does not provide the real temperature
+of die other than just indicating whether temperature is above or
+below threshold level.
+
+Required properties:
+-------------------
+#thermal-sensor-cells: Please refer <devicetree/bindings/thermal/thermal.txt>
+ for more details.
+ The value must be 0.
+
+For more details, please refer generic thermal DT binding document
+<devicetree/bindings/thermal/thermal.txt>.
+
+Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding
+document for the MAX77620.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+...
+
+i2c@7000d000 {
+ spmic: max77620@3c {
+ compatible = "maxim,max77620";
+ :::::
+ #thermal-sensor-cells = <0>;
+ :::
+ };
+};
+
+cool_dev: cool-dev {
+ compatible = "cooling-dev";
+ #cooling-cells = <2>;
+};
+
+thermal-zones {
+ PMIC-Die {
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&spmic>;
+
+ trips {
+ pmic_die_warn_temp_thresh: hot-die {
+ temperature = <120000>;
+ type = "hot";
+ hysteresis = <0>;
+ };
+
+ pmic_die_cirt_temp_thresh: cirtical-die {
+ temperature = <140000>;
+ type = "critical";
+ hysteresis = <0>;
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&pmic_die_warn_temp_thresh>;
+ cooling-device = <&cool_dev THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ contribution = <100>;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 81f9a512bc2a..e2f494d74d8a 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -8,7 +8,9 @@ apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
is also needed.
Required properties:
-- compatible: "mediatek,mt8173-thermal"
+- compatible:
+ - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
+ - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
- reg: Address range of the thermal controller
- interrupts: IRQ for the thermal controller
- clocks, clock-names: Clocks needed for the thermal controller. required
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
index edebfa0a985e..b6c0ae53d4dc 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -10,8 +10,14 @@ Required properties :
- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
For Tegra132, must contain "nvidia,tegra132-soctherm".
For Tegra210, must contain "nvidia,tegra210-soctherm".
-- reg : Should contain 1 entry:
+- reg : Should contain at least 2 entries for each entry in reg-names:
- SOCTHERM register set
+ - Tegra CAR register set: Required for Tegra124 and Tegra210.
+ - CCROC register set: Required for Tegra132.
+- reg-names : Should contain at least 2 entries:
+ - soctherm-reg
+ - car-reg
+ - ccroc-reg
- interrupts : Defines the interrupt used by SOCTHERM
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
@@ -25,17 +31,45 @@ Required properties :
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
list of valid values when referring to thermal sensors.
+- throttle-cfgs: A sub-node which is a container of configuration for each
+ hardware throttle events. These events can be set as cooling devices.
+ * throttle events: Sub-nodes must be named as "light" or "heavy".
+ Properties:
+ - nvidia,priority: Each throttles has its own throttle settings, so the
+ SW need to set priorities for various throttle, the HW arbiter can select
+ the final throttle settings.
+ Bigger value indicates higher priority, In general, higher priority
+ translates to lower target frequency. SW needs to ensure that critical
+ thermal alarms are given higher priority, and ensure that there is
+ no race if priority of two vectors is set to the same value.
+ The range of this value is 1~100.
+ - nvidia,cpu-throt-percent: This property is for Tegra124 and Tegra210.
+ It is the throttling depth of pulse skippers, it's the percentage
+ throttling.
+ - nvidia,cpu-throt-level: This property is only for Tegra132, it is the
+ level of pulse skippers, which used to throttle clock frequencies. It
+ indicates cpu clock throttling depth, and the depth can be programmed.
+ Must set as following values:
+ TEGRA_SOCTHERM_THROT_LEVEL_LOW, TEGRA_SOCTHERM_THROT_LEVEL_MED
+ TEGRA_SOCTHERM_THROT_LEVEL_HIGH, TEGRA_SOCTHERM_THROT_LEVEL_NONE
+ - #cooling-cells: Should be 1. This cooling device only support on/off state.
+ See ./thermal.txt for a description of this property.
Note:
- the "critical" type trip points will be set to SOC_THERM hardware as the
shut down temperature. Once the temperature of this thermal zone is higher
than it, the system will be shutdown or reset by hardware.
+- the "hot" type trip points will be set to SOC_THERM hardware as the throttle
+temperature. Once the the temperature of this thermal zone is higher
+than it, it will trigger the HW throttle event.
Example :
soctherm@700e2000 {
compatible = "nvidia,tegra124-soctherm";
- reg = <0x0 0x700e2000 0x0 0x1000>;
+ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+ 0x0 0x60006000 0x0 0x400 /* CAR reg_base */
+ reg-names = "soctherm-reg", "car-reg";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -44,6 +78,76 @@ Example :
reset-names = "soctherm";
#thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ /*
+ * When the "heavy" cooling device triggered,
+ * the HW will skip cpu clock's pulse in 85% depth
+ */
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-percent = <85>;
+
+ #cooling-cells = <1>;
+ };
+
+ /*
+ * When the "light" cooling device triggered,
+ * the HW will skip cpu clock's pulse in 50% depth
+ */
+ throttle_light: light {
+ nvidia,priority = <80>;
+ nvidia,cpu-throt-percent = <50>;
+
+ #cooling-cells = <1>;
+ };
+
+ /*
+ * If these two devices are triggered in same time, the HW throttle
+ * arbiter will select the highest priority as the final throttle
+ * settings to skip cpu pulse.
+ */
+ };
+ };
+
+Example: referring to Tegra132's "reg", "reg-names" and "throttle-cfgs" :
+
+ soctherm@700e2000 {
+ compatible = "nvidia,tegra132-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+ 0x0 0x70040000 0x0 0x200>; /* CCROC reg_base */;
+ reg-names = "soctherm-reg", "ccroc-reg";
+
+ throttle-cfgs {
+ /*
+ * When the "heavy" cooling device triggered,
+ * the HW will skip cpu clock's pulse in HIGH level
+ */
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+ #cooling-cells = <1>;
+ };
+
+ /*
+ * When the "light" cooling device triggered,
+ * the HW will skip cpu clock's pulse in MED level
+ */
+ throttle_light: light {
+ nvidia,priority = <80>;
+ nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
+
+ #cooling-cells = <1>;
+ };
+
+ /*
+ * If these two devices are triggered in same time, the HW throttle
+ * arbiter will select the highest priority as the final throttle
+ * settings to skip cpu pulse.
+ */
+
+ };
};
Example: referring to thermal sensors :
@@ -62,6 +166,19 @@ Example: referring to thermal sensors :
hysteresis = <1000>;
type = "critical";
};
+
+ cpu_throttle_trip: throttle-trip {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
new file mode 100644
index 000000000000..292ed89d900b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -0,0 +1,21 @@
+* QCOM SoC Temperature Sensor (TSENS)
+
+Required properties:
+- compatible :
+ - "qcom,msm8916-tsens" : For 8916 Family of SoCs
+ - "qcom,msm8974-tsens" : For 8974 Family of SoCs
+ - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+
+- reg: Address range of the thermal registers
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
+nvmem cells
+
+Example:
+tsens: thermal-sensor@900000 {
+ compatible = "qcom,msm8916-tsens";
+ reg = <0x4a8000 0x2000>;
+ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+ nvmem-cell-names = "caldata", "calsel";
+ #thermal-sensor-cells = <1>;
+ };
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index efc3f3d293c4..ef473dc7f55e 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -49,6 +49,9 @@ temperature) and throttle appropriate devices.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
+ .set_trips: set the trip points window. Whenever the current temperature
+ is updated, the trip points immediately below and above the
+ current temperature are found.
.get_mode: get the current mode (enabled/disabled) of the thermal zone.
- "enabled" means the kernel thermal management is enabled.
- "disabled" will prevent kernel thermal driver action upon trip points
@@ -95,6 +98,10 @@ temperature) and throttle appropriate devices.
get_temp: a pointer to a function that reads the
sensor temperature. This is mandatory
callback provided by sensor driver.
+ set_trips: a pointer to a function that sets a
+ temperature window. When this window is
+ left the driver must inform the thermal
+ core via thermal_zone_device_update.
get_trend: a pointer to a function that reads the
sensor temperature trend.
set_emul_temp: a pointer to a function that sets
@@ -140,6 +147,18 @@ temperature) and throttle appropriate devices.
Normally this function will not need to be called and the resource
management code will ensure that the resource is freed.
+1.1.7 int thermal_zone_get_slope(struct thermal_zone_device *tz)
+
+ This interface is used to read the slope attribute value
+ for the thermal zone device, which might be useful for platform
+ drivers for temperature calculations.
+
+1.1.8 int thermal_zone_get_offset(struct thermal_zone_device *tz)
+
+ This interface is used to read the offset attribute value
+ for the thermal zone device, which might be useful for platform
+ drivers for temperature calculations.
+
1.2 thermal cooling device interface
1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
void *devdata, struct thermal_cooling_device_ops *)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index e52b82449a79..53994f9fbbcc 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -2045,44 +2045,32 @@
thermal-zones {
cpu {
trips {
- trip {
+ cpu-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
mem {
trips {
- trip {
+ mem-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
gpu {
trips {
- trip {
+ gpu-shutdown-trip {
temperature = <101000>;
hysteresis = <0>;
type = "critical";
};
};
-
- cooling-maps {
- /* There are currently no cooling maps because there are no cooling devices */
- };
};
};
};
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ea340f9de448..187a36c6d0fc 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -851,7 +851,9 @@
soctherm: thermal-sensor@700e2000 {
compatible = "nvidia,tegra124-soctherm";
- reg = <0x0 0x700e2000 0x0 0x1000>;
+ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+ reg-names = "soctherm-reg", "car-reg";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -859,6 +861,15 @@
resets = <&tegra_car 78>;
reset-names = "soctherm";
#thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-percent = <85>;
+
+ #cooling-cells = <2>;
+ };
+ };
};
dfll: clock@70110000 {
@@ -1154,6 +1165,26 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ cpu_throttle_trip: throttle-trip {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
};
mem {
@@ -1162,6 +1193,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
gpu {
@@ -1170,6 +1216,26 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu-shutdown-trip {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ gpu_throttle_trip: throttle-trip {
+ temperature = <99000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
};
pllx {
@@ -1178,6 +1244,21 @@
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 2013f8916084..3f3a46a4bd01 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
/ {
compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,10 @@
};
soctherm: thermal-sensor@700e2000 {
- compatible = "nvidia,tegra124-soctherm";
- reg = <0x0 0x700e2000 0x0 0x1000>;
+ compatible = "nvidia,tegra132-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+ 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+ reg-names = "soctherm-reg", "ccroc-reg";
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -736,6 +739,118 @@
resets = <&tegra_car 78>;
reset-names = "soctherm";
#thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ cpu_throttle_trip: throttle-trip {
+ temperature = <102000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
+ };
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu_shutdown_trip {
+ temperature = <101000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ gpu_throttle_trip: throttle-trip {
+ temperature = <99000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
+ };
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx_shutdown_trip {
+ temperature = <105000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
};
ahub@70300000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index f6739797150a..46045fe719da 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
/ {
compatible = "nvidia,tegra210";
@@ -1159,4 +1160,130 @@
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
+
+ soctherm: thermal-sensor@700e2000 {
+ compatible = "nvidia,tegra210-soctherm";
+ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+ reg-names = "soctherm-reg", "car-reg";
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+ <&tegra_car TEGRA210_CLK_SOC_THERM>;
+ clock-names = "tsensor", "soctherm";
+ resets = <&tegra_car 78>;
+ reset-names = "soctherm";
+ #thermal-sensor-cells = <1>;
+
+ throttle-cfgs {
+ throttle_heavy: heavy {
+ nvidia,priority = <100>;
+ nvidia,cpu-throt-percent = <85>;
+
+ #cooling-cells = <2>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+ trips {
+ cpu-shutdown-trip {
+ temperature = <102500>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ cpu_throttle_trip: throttle-trip {
+ temperature = <98500>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
+ };
+ mem {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+ trips {
+ mem-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ gpu {
+ polling-delay-passive = <1000>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+ trips {
+ gpu-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+
+ gpu_throttle_trip: throttle-trip {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "hot";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_throttle_trip>;
+ cooling-device = <&throttle_heavy 1 1>;
+ };
+ };
+ };
+ pllx {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors =
+ <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+ trips {
+ pllx-shutdown-trip {
+ temperature = <103000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * There are currently no cooling maps,
+ * because there are no cooling devices.
+ */
+ };
+ };
+ };
};
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index f4ebe39539af..35e8fbca10ad 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -520,7 +520,8 @@ static void acpi_thermal_check(void *data)
if (!tz->tz_enabled)
return;
- thermal_zone_device_update(tz->thermal_zone);
+ thermal_zone_device_update(tz->thermal_zone,
+ THERMAL_EVENT_UNSPECIFIED);
}
/* sys I/F for generic thermal sysfs support */
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 460fa6708bfc..2acdb0d6ea89 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -405,7 +405,7 @@ static inline void acerhdf_enable_kernelmode(void)
kernelmode = 1;
thz_dev->polling_delay = interval*1000;
- thermal_zone_device_update(thz_dev);
+ thermal_zone_device_update(thz_dev, THERMAL_EVENT_UNSPECIFIED);
pr_notice("kernel mode fan control ON\n");
}
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 3958f50c5975..e0c747aa9f85 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -495,7 +495,8 @@ static irqreturn_t max8973_thermal_irq(int irq, void *data)
{
struct max8973_chip *mchip = data;
- thermal_zone_device_update(mchip->tz_device);
+ thermal_zone_device_update(mchip->tz_device,
+ THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 2d702ca6556f..a13541bdc726 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -186,7 +186,7 @@ config HISI_THERMAL
config IMX_THERMAL
tristate "Temperature sensor driver for Freescale i.MX SoCs"
- depends on CPU_THERMAL
+ depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST
depends on MFD_SYSCON
depends on OF
help
@@ -195,6 +195,26 @@ config IMX_THERMAL
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
+config MAX77620_THERMAL
+ tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
+ depends on MFD_MAX77620
+ depends on OF
+ help
+ Support for die junction temperature warning alarm for Maxim
+ Semiconductor PMIC MAX77620 device. Device generates two alarm
+ interrupts when PMIC die temperature cross the threshold of
+ 120 degC and 140 degC.
+
+config QORIQ_THERMAL
+ tristate "QorIQ Thermal Monitoring Unit"
+ depends on THERMAL_OF
+ depends on HAS_IOMEM
+ help
+ Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
+ It supports one critical trip point and one passive trip point. The
+ cpufreq is used as the cooling device to throttle CPUs when the
+ passive trip is crossed.
+
config SPEAR_THERMAL
tristate "SPEAr thermal sensor driver"
depends on PLAT_SPEAR || COMPILE_TEST
@@ -332,6 +352,16 @@ menu "ACPI INT340X thermal drivers"
source drivers/thermal/int340x_thermal/Kconfig
endmenu
+config INTEL_BXT_PMIC_THERMAL
+ tristate "Intel Broxton PMIC thermal driver"
+ depends on X86 && INTEL_SOC_PMIC && REGMAP
+ help
+ Select this driver for Intel Broxton PMIC with ADC channels monitoring
+ system temperature measurements and alerts.
+ This driver is used for monitoring the ADC channels of PMIC and handles
+ the alert trip point interrupts and notifies the thermal framework with
+ the trip point and temperature details of the zone.
+
config INTEL_PCH_THERMAL
tristate "Intel PCH Thermal Reporting Driver"
depends on X86 && PCI
@@ -399,4 +429,9 @@ config GENERIC_ADC_THERMAL
to this driver. This driver reports the temperature by reading ADC
channel and converts it to temperature based on lookup table.
+menu "Qualcomm thermal drivers"
+depends on (ARCH_QCOM && OF) || COMPILE_TEST
+source "drivers/thermal/qcom/Kconfig"
+endmenu
+
endif
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 10b07c14f8a9..c92eb22a41ff 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -37,6 +37,8 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
+obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
+obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
@@ -45,8 +47,10 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
+obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
obj-$(CONFIG_ST_THERMAL) += st/
+obj-$(CONFIG_QCOM_TSENS) += qcom/
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index a32b41783b77..9ce0e9eef923 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -74,7 +74,7 @@ struct power_table {
* cpufreq frequencies.
* @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
* @node: list_head to link all cpufreq_cooling_device together.
- * @last_load: load measured by the latest call to cpufreq_get_actual_power()
+ * @last_load: load measured by the latest call to cpufreq_get_requested_power()
* @time_in_idle: previous reading of the absolute time that this cpu was idle
* @time_in_idle_timestamp: wall time of the last invocation of
* get_cpu_idle_time_us()
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index 652acd8fbe48..e776cea80cfc 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -306,7 +306,7 @@ static void db8500_thermal_work(struct work_struct *work)
if (cur_mode == THERMAL_DEVICE_DISABLED)
return;
- thermal_zone_device_update(pzone->therm_dev);
+ thermal_zone_device_update(pzone->therm_dev, THERMAL_EVENT_UNSPECIFIED);
dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n");
}
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index 01f0015f80dc..81631b110e17 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -312,7 +312,7 @@ static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev,
unsigned long freq;
u32 static_power;
- if (state < 0 || state >= dfc->freq_table_size)
+ if (state >= dfc->freq_table_size)
return -EINVAL;
freq = dfc->freq_table[state];
diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c
index bb118a152cbb..fc5e5057f0de 100644
--- a/drivers/thermal/gov_bang_bang.c
+++ b/drivers/thermal/gov_bang_bang.c
@@ -65,7 +65,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
if (instance->target == 0 && tz->temperature >= trip_temp)
instance->target = 1;
else if (instance->target == 1 &&
- tz->temperature < trip_temp - trip_hyst)
+ tz->temperature <= trip_temp - trip_hyst)
instance->target = 0;
dev_dbg(&instance->cdev->device, "target=%d\n",
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 97fad8f51e1c..f6429666a1cf 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -237,7 +237,8 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
if (!data->sensors[i].tzd)
continue;
- thermal_zone_device_update(data->sensors[i].tzd);
+ thermal_zone_device_update(data->sensors[i].tzd,
+ THERMAL_EVENT_UNSPECIFIED);
}
return IRQ_HANDLED;
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index e473548b5d28..06912f0602b7 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -246,7 +246,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
}
data->mode = mode;
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
}
@@ -457,7 +457,7 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev)
dev_dbg(&data->tz->device, "THERMAL ALARM: T > %d\n",
data->alarm_temp / 1000);
- thermal_zone_device_update(data->tz);
+ thermal_zone_device_update(data->tz, THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c
index 69df3d960303..8e90b3151a42 100644
--- a/drivers/thermal/int340x_thermal/int3402_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3402_thermal.c
@@ -35,7 +35,8 @@ static void int3402_notify(acpi_handle handle, u32 event, void *data)
case INT3402_PERF_CHANGED_EVENT:
break;
case INT3402_THERMAL_EVENT:
- int340x_thermal_zone_device_update(priv->int340x_zone);
+ int340x_thermal_zone_device_update(priv->int340x_zone,
+ THERMAL_TRIP_VIOLATED);
break;
default:
break;
diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c
index 50a7a08e3a15..c4890c9437eb 100644
--- a/drivers/thermal/int340x_thermal/int3403_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3403_thermal.c
@@ -25,6 +25,7 @@
#define INT3403_TYPE_CHARGER 0x0B
#define INT3403_TYPE_BATTERY 0x0C
#define INT3403_PERF_CHANGED_EVENT 0x80
+#define INT3403_PERF_TRIP_POINT_CHANGED 0x81
#define INT3403_THERMAL_EVENT 0x90
/* Preserved structure for future expandbility */
@@ -72,7 +73,13 @@ static void int3403_notify(acpi_handle handle,
case INT3403_PERF_CHANGED_EVENT:
break;
case INT3403_THERMAL_EVENT:
- int340x_thermal_zone_device_update(obj->int340x_zone);
+ int340x_thermal_zone_device_update(obj->int340x_zone,
+ THERMAL_TRIP_VIOLATED);
+ break;
+ case INT3403_PERF_TRIP_POINT_CHANGED:
+ int340x_thermal_read_trips(obj->int340x_zone);
+ int340x_thermal_zone_device_update(obj->int340x_zone,
+ THERMAL_TRIP_CHANGED);
break;
default:
dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event);
diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/int340x_thermal/int340x_thermal_zone.c
index b9b2666aa94c..145a5c53ff5c 100644
--- a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/int340x_thermal/int340x_thermal_zone.c
@@ -177,6 +177,42 @@ static int int340x_thermal_get_trip_config(acpi_handle handle, char *name,
return 0;
}
+int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone)
+{
+ int trip_cnt = int34x_zone->aux_trip_nr;
+ int i;
+
+ int34x_zone->crt_trip_id = -1;
+ if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_CRT",
+ &int34x_zone->crt_temp))
+ int34x_zone->crt_trip_id = trip_cnt++;
+
+ int34x_zone->hot_trip_id = -1;
+ if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_HOT",
+ &int34x_zone->hot_temp))
+ int34x_zone->hot_trip_id = trip_cnt++;
+
+ int34x_zone->psv_trip_id = -1;
+ if (!int340x_thermal_get_trip_config(int34x_zone->adev->handle, "_PSV",
+ &int34x_zone->psv_temp))
+ int34x_zone->psv_trip_id = trip_cnt++;
+
+ for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) {
+ char name[5] = { '_', 'A', 'C', '0' + i, '\0' };
+
+ if (int340x_thermal_get_trip_config(int34x_zone->adev->handle,
+ name,
+ &int34x_zone->act_trips[i].temp))
+ break;
+
+ int34x_zone->act_trips[i].id = trip_cnt++;
+ int34x_zone->act_trips[i].valid = true;
+ }
+
+ return trip_cnt;
+}
+EXPORT_SYMBOL_GPL(int340x_thermal_read_trips);
+
static struct thermal_zone_params int340x_thermal_params = {
.governor_name = "user_space",
.no_hwmon = true,
@@ -188,7 +224,7 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
struct int34x_thermal_zone *int34x_thermal_zone;
acpi_status status;
unsigned long long trip_cnt;
- int trip_mask = 0, i;
+ int trip_mask = 0;
int ret;
int34x_thermal_zone = kzalloc(sizeof(*int34x_thermal_zone),
@@ -214,28 +250,8 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
int34x_thermal_zone->aux_trip_nr = trip_cnt;
}
- int34x_thermal_zone->crt_trip_id = -1;
- if (!int340x_thermal_get_trip_config(adev->handle, "_CRT",
- &int34x_thermal_zone->crt_temp))
- int34x_thermal_zone->crt_trip_id = trip_cnt++;
- int34x_thermal_zone->hot_trip_id = -1;
- if (!int340x_thermal_get_trip_config(adev->handle, "_HOT",
- &int34x_thermal_zone->hot_temp))
- int34x_thermal_zone->hot_trip_id = trip_cnt++;
- int34x_thermal_zone->psv_trip_id = -1;
- if (!int340x_thermal_get_trip_config(adev->handle, "_PSV",
- &int34x_thermal_zone->psv_temp))
- int34x_thermal_zone->psv_trip_id = trip_cnt++;
- for (i = 0; i < INT340X_THERMAL_MAX_ACT_TRIP_COUNT; i++) {
- char name[5] = { '_', 'A', 'C', '0' + i, '\0' };
+ trip_cnt = int340x_thermal_read_trips(int34x_thermal_zone);
- if (int340x_thermal_get_trip_config(adev->handle, name,
- &int34x_thermal_zone->act_trips[i].temp))
- break;
-
- int34x_thermal_zone->act_trips[i].id = trip_cnt++;
- int34x_thermal_zone->act_trips[i].valid = true;
- }
int34x_thermal_zone->lpat_table = acpi_lpat_get_conversion_table(
adev->handle);
diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h b/drivers/thermal/int340x_thermal/int340x_thermal_zone.h
index aaadf724ff2e..5f3ba4775c5c 100644
--- a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h
+++ b/drivers/thermal/int340x_thermal/int340x_thermal_zone.h
@@ -46,6 +46,7 @@ struct int34x_thermal_zone {
struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *,
struct thermal_zone_device_ops *override_ops);
void int340x_thermal_zone_remove(struct int34x_thermal_zone *);
+int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone);
static inline void int340x_thermal_zone_set_priv_data(
struct int34x_thermal_zone *tzone, void *priv_data)
@@ -60,9 +61,10 @@ static inline void *int340x_thermal_zone_get_priv_data(
}
static inline void int340x_thermal_zone_device_update(
- struct int34x_thermal_zone *tzone)
+ struct int34x_thermal_zone *tzone,
+ enum thermal_notify_event event)
{
- thermal_zone_device_update(tzone->zone);
+ thermal_zone_device_update(tzone->zone, event);
}
#endif
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index 42c1ac057bad..ff3b36f339e3 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -258,7 +258,8 @@ static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
switch (event) {
case PROC_POWER_CAPABILITY_CHANGED:
proc_thermal_read_ppcc(proc_priv);
- int340x_thermal_zone_device_update(proc_priv->int340x_zone);
+ int340x_thermal_zone_device_update(proc_priv->int340x_zone,
+ THERMAL_DEVICE_POWER_CAPABILITY_CHANGED);
break;
default:
dev_err(proc_priv->dev, "Unsupported event [0x%x]\n", event);
diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel_bxt_pmic_thermal.c
new file mode 100644
index 000000000000..0f19a393ddd8
--- /dev/null
+++ b/drivers/thermal/intel_bxt_pmic_thermal.c
@@ -0,0 +1,300 @@
+/*
+ * Intel Broxton PMIC thermal driver
+ *
+ * Copyright (C) 2016 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define BXTWC_THRM0IRQ 0x4E04
+#define BXTWC_THRM1IRQ 0x4E05
+#define BXTWC_THRM2IRQ 0x4E06
+#define BXTWC_MTHRM0IRQ 0x4E12
+#define BXTWC_MTHRM1IRQ 0x4E13
+#define BXTWC_MTHRM2IRQ 0x4E14
+#define BXTWC_STHRM0IRQ 0x4F19
+#define BXTWC_STHRM1IRQ 0x4F1A
+#define BXTWC_STHRM2IRQ 0x4F1B
+
+struct trip_config_map {
+ u16 irq_reg;
+ u16 irq_en;
+ u16 evt_stat;
+ u8 irq_mask;
+ u8 irq_en_mask;
+ u8 evt_mask;
+ u8 trip_num;
+};
+
+struct thermal_irq_map {
+ char handle[20];
+ int num_trips;
+ const struct trip_config_map *trip_config;
+};
+
+struct pmic_thermal_data {
+ const struct thermal_irq_map *maps;
+ int num_maps;
+};
+
+static const struct trip_config_map bxtwc_str0_trip_config[] = {
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x01,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x01,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x01,
+ .trip_num = 0
+ },
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x10,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x10,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x10,
+ .trip_num = 1
+ }
+};
+
+static const struct trip_config_map bxtwc_str1_trip_config[] = {
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x02,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x02,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x02,
+ .trip_num = 0
+ },
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x20,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x20,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x20,
+ .trip_num = 1
+ },
+};
+
+static const struct trip_config_map bxtwc_str2_trip_config[] = {
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x04,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x04,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x04,
+ .trip_num = 0
+ },
+ {
+ .irq_reg = BXTWC_THRM0IRQ,
+ .irq_mask = 0x40,
+ .irq_en = BXTWC_MTHRM0IRQ,
+ .irq_en_mask = 0x40,
+ .evt_stat = BXTWC_STHRM0IRQ,
+ .evt_mask = 0x40,
+ .trip_num = 1
+ },
+};
+
+static const struct trip_config_map bxtwc_str3_trip_config[] = {
+ {
+ .irq_reg = BXTWC_THRM2IRQ,
+ .irq_mask = 0x10,
+ .irq_en = BXTWC_MTHRM2IRQ,
+ .irq_en_mask = 0x10,
+ .evt_stat = BXTWC_STHRM2IRQ,
+ .evt_mask = 0x10,
+ .trip_num = 0
+ },
+};
+
+static const struct thermal_irq_map bxtwc_thermal_irq_map[] = {
+ {
+ .handle = "STR0",
+ .trip_config = bxtwc_str0_trip_config,
+ .num_trips = ARRAY_SIZE(bxtwc_str0_trip_config),
+ },
+ {
+ .handle = "STR1",
+ .trip_config = bxtwc_str1_trip_config,
+ .num_trips = ARRAY_SIZE(bxtwc_str1_trip_config),
+ },
+ {
+ .handle = "STR2",
+ .trip_config = bxtwc_str2_trip_config,
+ .num_trips = ARRAY_SIZE(bxtwc_str2_trip_config),
+ },
+ {
+ .handle = "STR3",
+ .trip_config = bxtwc_str3_trip_config,
+ .num_trips = ARRAY_SIZE(bxtwc_str3_trip_config),
+ },
+};
+
+static const struct pmic_thermal_data bxtwc_thermal_data = {
+ .maps = bxtwc_thermal_irq_map,
+ .num_maps = ARRAY_SIZE(bxtwc_thermal_irq_map),
+};
+
+static irqreturn_t pmic_thermal_irq_handler(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct thermal_zone_device *tzd;
+ struct pmic_thermal_data *td;
+ struct intel_soc_pmic *pmic;
+ struct regmap *regmap;
+ u8 reg_val, mask, irq_stat, trip;
+ u16 reg, evt_stat_reg;
+ int i, j, ret;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ regmap = pmic->regmap;
+ td = (struct pmic_thermal_data *)
+ platform_get_device_id(pdev)->driver_data;
+
+ /* Resolve thermal irqs */
+ for (i = 0; i < td->num_maps; i++) {
+ for (j = 0; j < td->maps[i].num_trips; j++) {
+ reg = td->maps[i].trip_config[j].irq_reg;
+ mask = td->maps[i].trip_config[j].irq_mask;
+ /*
+ * Read the irq register to resolve whether the
+ * interrupt was triggered for this sensor
+ */
+ if (regmap_read(regmap, reg, &ret))
+ return IRQ_HANDLED;
+
+ reg_val = (u8)ret;
+ irq_stat = ((u8)ret & mask);
+
+ if (!irq_stat)
+ continue;
+
+ /*
+ * Read the status register to find out what
+ * event occurred i.e a high or a low
+ */
+ evt_stat_reg = td->maps[i].trip_config[j].evt_stat;
+ if (regmap_read(regmap, evt_stat_reg, &ret))
+ return IRQ_HANDLED;
+
+ trip = td->maps[i].trip_config[j].trip_num;
+ tzd = thermal_zone_get_zone_by_name(td->maps[i].handle);
+ if (!IS_ERR(tzd))
+ thermal_zone_device_update(tzd,
+ THERMAL_EVENT_UNSPECIFIED);
+
+ /* Clear the appropriate irq */
+ regmap_write(regmap, reg, reg_val & mask);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int pmic_thermal_probe(struct platform_device *pdev)
+{
+ struct regmap_irq_chip_data *regmap_irq_chip;
+ struct pmic_thermal_data *thermal_data;
+ int ret, irq, virq, i, j, pmic_irq_count;
+ struct intel_soc_pmic *pmic;
+ struct regmap *regmap;
+ struct device *dev;
+ u16 reg;
+ u8 mask;
+
+ dev = &pdev->dev;
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(dev, "Failed to get struct intel_soc_pmic pointer\n");
+ return -ENODEV;
+ }
+
+ thermal_data = (struct pmic_thermal_data *)
+ platform_get_device_id(pdev)->driver_data;
+ if (!thermal_data) {
+ dev_err(dev, "No thermal data initialized!!\n");
+ return -ENODEV;
+ }
+
+ regmap = pmic->regmap;
+ regmap_irq_chip = pmic->irq_chip_data_level2;
+
+ pmic_irq_count = 0;
+ while ((irq = platform_get_irq(pdev, pmic_irq_count)) != -ENXIO) {
+ virq = regmap_irq_get_virq(regmap_irq_chip, irq);
+ if (virq < 0) {
+ dev_err(dev, "failed to get virq by irq %d\n", irq);
+ return virq;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, virq,
+ NULL, pmic_thermal_irq_handler,
+ IRQF_ONESHOT, "pmic_thermal", pdev);
+
+ if (ret) {
+ dev_err(dev, "request irq(%d) failed: %d\n", virq, ret);
+ return ret;
+ }
+ pmic_irq_count++;
+ }
+
+ /* Enable thermal interrupts */
+ for (i = 0; i < thermal_data->num_maps; i++) {
+ for (j = 0; j < thermal_data->maps[i].num_trips; j++) {
+ reg = thermal_data->maps[i].trip_config[j].irq_en;
+ mask = thermal_data->maps[i].trip_config[j].irq_en_mask;
+ ret = regmap_update_bits(regmap, reg, mask, 0x00);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id pmic_thermal_id_table[] = {
+ {
+ .name = "bxt_wcove_thermal",
+ .driver_data = (kernel_ulong_t)&bxtwc_thermal_data,
+ },
+ {},
+};
+
+static struct platform_driver pmic_thermal_driver = {
+ .probe = pmic_thermal_probe,
+ .driver = {
+ .name = "pmic_thermal",
+ },
+ .id_table = pmic_thermal_id_table,
+};
+
+MODULE_DEVICE_TABLE(platform, pmic_thermal_id_table);
+module_platform_driver(pmic_thermal_driver);
+
+MODULE_AUTHOR("Yegnesh S Iyer <yegnesh.s.iyer@intel.com>");
+MODULE_DESCRIPTION("Intel Broxton PMIC Thermal Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/intel_soc_dts_iosf.c b/drivers/thermal/intel_soc_dts_iosf.c
index f72e1db3216f..e0813dfaa278 100644
--- a/drivers/thermal/intel_soc_dts_iosf.c
+++ b/drivers/thermal/intel_soc_dts_iosf.c
@@ -391,7 +391,8 @@ void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors)
for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
pr_debug("TZD update for zone %d\n", i);
- thermal_zone_device_update(sensors->soc_dts[i].tzone);
+ thermal_zone_device_update(sensors->soc_dts[i].tzone,
+ THERMAL_EVENT_UNSPECIFIED);
}
} else
spin_unlock_irqrestore(&sensors->intr_notify_lock, flags);
diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
new file mode 100644
index 000000000000..83905ff46e40
--- /dev/null
+++ b/drivers/thermal/max77620_thermal.c
@@ -0,0 +1,166 @@
+/*
+ * Junction temperature thermal driver for Maxim Max77620.
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ * Mallikarjun Kasoju <mkasoju@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77620.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+
+#define MAX77620_NORMAL_OPERATING_TEMP 100000
+#define MAX77620_TJALARM1_TEMP 120000
+#define MAX77620_TJALARM2_TEMP 140000
+
+struct max77620_therm_info {
+ struct device *dev;
+ struct regmap *rmap;
+ struct thermal_zone_device *tz_device;
+ int irq_tjalarm1;
+ int irq_tjalarm2;
+};
+
+/**
+ * max77620_thermal_read_temp: Read PMIC die temperatue.
+ * @data: Device specific data.
+ * temp: Temperature in millidegrees Celsius
+ *
+ * The actual temperature of PMIC die is not available from PMIC.
+ * PMIC only tells the status if it has crossed or not the threshold level
+ * of 120degC or 140degC.
+ * If threshold has not been crossed then assume die temperature as 100degC
+ * else 120degC or 140deG based on the PMIC die temp threshold status.
+ *
+ * Return 0 on success otherwise error number to show reason of failure.
+ */
+
+static int max77620_thermal_read_temp(void *data, int *temp)
+{
+ struct max77620_therm_info *mtherm = data;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val);
+ if (ret < 0) {
+ dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret);
+ return ret;
+ }
+
+ if (val & MAX77620_IRQ_TJALRM2_MASK)
+ *temp = MAX77620_TJALARM2_TEMP;
+ else if (val & MAX77620_IRQ_TJALRM1_MASK)
+ *temp = MAX77620_TJALARM1_TEMP;
+ else
+ *temp = MAX77620_NORMAL_OPERATING_TEMP;
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops max77620_thermal_ops = {
+ .get_temp = max77620_thermal_read_temp,
+};
+
+static irqreturn_t max77620_thermal_irq(int irq, void *data)
+{
+ struct max77620_therm_info *mtherm = data;
+
+ if (irq == mtherm->irq_tjalarm1)
+ dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n");
+ else if (irq == mtherm->irq_tjalarm2)
+ dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n");
+
+ thermal_zone_device_update(mtherm->tz_device,
+ THERMAL_EVENT_UNSPECIFIED);
+
+ return IRQ_HANDLED;
+}
+
+static int max77620_thermal_probe(struct platform_device *pdev)
+{
+ struct max77620_therm_info *mtherm;
+ int ret;
+
+ mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL);
+ if (!mtherm)
+ return -ENOMEM;
+
+ mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0);
+ mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1);
+ if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) {
+ dev_err(&pdev->dev, "Alarm irq number not available\n");
+ return -EINVAL;
+ }
+
+ pdev->dev.of_node = pdev->dev.parent->of_node;
+
+ mtherm->dev = &pdev->dev;
+ mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!mtherm->rmap) {
+ dev_err(&pdev->dev, "Failed to get parent regmap\n");
+ return -ENODEV;
+ }
+
+ mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
+ mtherm, &max77620_thermal_ops);
+ if (IS_ERR(mtherm->tz_device)) {
+ ret = PTR_ERR(mtherm->tz_device);
+ dev_err(&pdev->dev, "Failed to register thermal zone: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL,
+ max77620_thermal_irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ dev_name(&pdev->dev), mtherm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL,
+ max77620_thermal_irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ dev_name(&pdev->dev), mtherm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, mtherm);
+
+ return 0;
+}
+
+static struct platform_device_id max77620_thermal_devtype[] = {
+ { .name = "max77620-thermal", },
+ {},
+};
+
+static struct platform_driver max77620_thermal_driver = {
+ .driver = {
+ .name = "max77620-thermal",
+ },
+ .probe = max77620_thermal_probe,
+ .id_table = max77620_thermal_devtype,
+};
+
+module_platform_driver(max77620_thermal_driver);
+
+MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 262ab0a2266f..34169c32d495 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -2,6 +2,7 @@
* Copyright (c) 2015 MediaTek Inc.
* Author: Hanyi Wu <hanyi.wu@mediatek.com>
* Sascha Hauer <s.hauer@pengutronix.de>
+ * Dawei Chien <dawei.chien@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -21,6 +22,7 @@
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/io.h>
@@ -88,6 +90,7 @@
#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5)
#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit)
+/* MT8173 thermal sensors */
#define MT8173_TS1 0
#define MT8173_TS2 1
#define MT8173_TS3 2
@@ -106,7 +109,12 @@
/* The number of sensing points per bank */
#define MT8173_NUM_SENSORS_PER_ZONE 4
-/* Layout of the fuses providing the calibration data */
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for both MT8173 and MT2701.
+ * MT8173 has five sensors and need five VTS calibration data,
+ * and MT2701 has three sensors and need three VTS calibration data.
+ */
#define MT8173_CALIB_BUF0_VALID BIT(0)
#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
@@ -117,24 +125,50 @@
#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)
+/* MT2701 thermal sensors */
+#define MT2701_TS1 0
+#define MT2701_TS2 1
+#define MT2701_TSABB 2
+
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT2701_TEMP_AUXADC_CHANNEL 11
+
+/* The total number of temperature sensors in the MT2701 */
+#define MT2701_NUM_SENSORS 3
+
#define THERMAL_NAME "mtk-thermal"
+/* The number of sensing points per bank */
+#define MT2701_NUM_SENSORS_PER_ZONE 3
+
struct mtk_thermal;
+struct thermal_bank_cfg {
+ unsigned int num_sensors;
+ const int *sensors;
+};
+
struct mtk_thermal_bank {
struct mtk_thermal *mt;
int id;
};
+struct mtk_thermal_data {
+ s32 num_banks;
+ s32 num_sensors;
+ s32 auxadc_channel;
+ const int *sensor_mux_values;
+ const int *msr;
+ const int *adcpnp;
+ struct thermal_bank_cfg bank_data[];
+};
+
struct mtk_thermal {
struct device *dev;
void __iomem *thermal_base;
struct clk *clk_peri_therm;
struct clk *clk_auxadc;
-
- struct mtk_thermal_bank banks[MT8173_NUM_ZONES];
-
/* lock: for getting and putting banks */
struct mutex lock;
@@ -144,16 +178,44 @@ struct mtk_thermal {
s32 o_slope;
s32 vts[MT8173_NUM_SENSORS];
+ const struct mtk_thermal_data *conf;
+ struct mtk_thermal_bank banks[];
};
-struct mtk_thermal_bank_cfg {
- unsigned int num_sensors;
- unsigned int sensors[MT8173_NUM_SENSORS_PER_ZONE];
+/* MT8173 thermal sensor data */
+const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
+ { MT8173_TS2, MT8173_TS3 },
+ { MT8173_TS2, MT8173_TS4 },
+ { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
+ { MT8173_TS2 },
};
-static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR2
+};
-/*
+const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
+};
+
+const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
+
+/* MT2701 thermal sensor data */
+const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
+ MT2701_TS1, MT2701_TS2, MT2701_TSABB
+};
+
+const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
+
+/**
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
* temperature sensors. We use each bank to measure a certain area of the
@@ -166,42 +228,53 @@ static const int sensor_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
* data, and this indeed needs the temperatures of the individual banks
* for making better decisions.
*/
-static const struct mtk_thermal_bank_cfg bank_data[] = {
- {
- .num_sensors = 2,
- .sensors = { MT8173_TS2, MT8173_TS3 },
- }, {
- .num_sensors = 2,
- .sensors = { MT8173_TS2, MT8173_TS4 },
- }, {
- .num_sensors = 3,
- .sensors = { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
- }, {
- .num_sensors = 1,
- .sensors = { MT8173_TS2 },
+static const struct mtk_thermal_data mt8173_thermal_data = {
+ .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT8173_NUM_ZONES,
+ .num_sensors = MT8173_NUM_SENSORS,
+ .bank_data = {
+ {
+ .num_sensors = 2,
+ .sensors = mt8173_bank_data[0],
+ }, {
+ .num_sensors = 2,
+ .sensors = mt8173_bank_data[1],
+ }, {
+ .num_sensors = 3,
+ .sensors = mt8173_bank_data[2],
+ }, {
+ .num_sensors = 1,
+ .sensors = mt8173_bank_data[3],
+ },
},
+ .msr = mt8173_msr,
+ .adcpnp = mt8173_adcpnp,
+ .sensor_mux_values = mt8173_mux_values,
};
-struct mtk_thermal_sense_point {
- int msr;
- int adcpnp;
-};
-
-static const struct mtk_thermal_sense_point
- sensing_points[MT8173_NUM_SENSORS_PER_ZONE] = {
- {
- .msr = TEMP_MSR0,
- .adcpnp = TEMP_ADCPNP0,
- }, {
- .msr = TEMP_MSR1,
- .adcpnp = TEMP_ADCPNP1,
- }, {
- .msr = TEMP_MSR2,
- .adcpnp = TEMP_ADCPNP2,
- }, {
- .msr = TEMP_MSR3,
- .adcpnp = TEMP_ADCPNP3,
+/**
+ * The MT2701 thermal controller has one bank, which can read up to
+ * three temperature sensors simultaneously. The MT2701 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt2701_thermal_data = {
+ .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
+ .num_banks = 1,
+ .num_sensors = MT2701_NUM_SENSORS,
+ .bank_data = {
+ {
+ .num_sensors = 3,
+ .sensors = mt2701_bank_data,
+ },
},
+ .msr = mt2701_msr,
+ .adcpnp = mt2701_adcpnp,
+ .sensor_mux_values = mt2701_mux_values,
};
/**
@@ -270,13 +343,16 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
{
struct mtk_thermal *mt = bank->mt;
+ const struct mtk_thermal_data *conf = mt->conf;
int i, temp = INT_MIN, max = INT_MIN;
u32 raw;
- for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
- raw = readl(mt->thermal_base + sensing_points[i].msr);
+ for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
+ raw = readl(mt->thermal_base + conf->msr[i]);
- temp = raw_to_mcelsius(mt, bank_data[bank->id].sensors[i], raw);
+ temp = raw_to_mcelsius(mt,
+ conf->bank_data[bank->id].sensors[i],
+ raw);
/*
* The first read of a sensor often contains very high bogus
@@ -299,7 +375,7 @@ static int mtk_read_temp(void *data, int *temperature)
int i;
int tempmax = INT_MIN;
- for (i = 0; i < MT8173_NUM_ZONES; i++) {
+ for (i = 0; i < mt->conf->num_banks; i++) {
struct mtk_thermal_bank *bank = &mt->banks[i];
mtk_thermal_get_bank(bank);
@@ -322,7 +398,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
u32 apmixed_phys_base, u32 auxadc_phys_base)
{
struct mtk_thermal_bank *bank = &mt->banks[num];
- const struct mtk_thermal_bank_cfg *cfg = &bank_data[num];
+ const struct mtk_thermal_data *conf = mt->conf;
int i;
bank->id = num;
@@ -368,7 +444,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
* this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
* automatically by hw
*/
- writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCMUX);
+ writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCMUX);
/* AHB address for auxadc mux selection */
writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
@@ -379,18 +455,18 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
mt->thermal_base + TEMP_PNPMUXADDR);
/* AHB value for auxadc enable */
- writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN);
+ writel(BIT(conf->auxadc_channel), mt->thermal_base + TEMP_ADCEN);
/* AHB address for auxadc enable (channel 0 immediate mode selected) */
writel(auxadc_phys_base + AUXADC_CON1_SET_V,
mt->thermal_base + TEMP_ADCENADDR);
/* AHB address for auxadc valid bit */
- writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
mt->thermal_base + TEMP_ADCVALIDADDR);
/* AHB address for auxadc voltage output */
- writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
mt->thermal_base + TEMP_ADCVOLTADDR);
/* read valid & voltage are at the same register */
@@ -407,11 +483,12 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
mt->thermal_base + TEMP_ADCWRITECTRL);
- for (i = 0; i < cfg->num_sensors; i++)
- writel(sensor_mux_values[cfg->sensors[i]],
- mt->thermal_base + sensing_points[i].adcpnp);
+ for (i = 0; i < conf->bank_data[num].num_sensors; i++)
+ writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
+ mt->thermal_base + conf->adcpnp[i]);
- writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);
+ writel((1 << conf->bank_data[num].num_sensors) - 1,
+ mt->thermal_base + TEMP_MONCTL0);
writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
@@ -442,7 +519,7 @@ static int mtk_thermal_get_calibration_data(struct device *dev,
/* Start with default values */
mt->adc_ge = 512;
- for (i = 0; i < MT8173_NUM_SENSORS; i++)
+ for (i = 0; i < mt->conf->num_sensors; i++)
mt->vts[i] = 260;
mt->degc_cali = 40;
mt->o_slope = 0;
@@ -486,18 +563,37 @@ out:
return ret;
}
+static const struct of_device_id mtk_thermal_of_match[] = {
+ {
+ .compatible = "mediatek,mt8173-thermal",
+ .data = (void *)&mt8173_thermal_data,
+ },
+ {
+ .compatible = "mediatek,mt2701-thermal",
+ .data = (void *)&mt2701_thermal_data,
+ }, {
+ },
+};
+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
+
static int mtk_thermal_probe(struct platform_device *pdev)
{
int ret, i;
struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
struct mtk_thermal *mt;
struct resource *res;
+ const struct of_device_id *of_id;
u64 auxadc_phys_base, apmixed_phys_base;
+ struct thermal_zone_device *tzdev;
mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
if (!mt)
return -ENOMEM;
+ of_id = of_match_device(mtk_thermal_of_match, &pdev->dev);
+ if (of_id)
+ mt->conf = (const struct mtk_thermal_data *)of_id->data;
+
mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
if (IS_ERR(mt->clk_peri_therm))
return PTR_ERR(mt->clk_peri_therm);
@@ -565,17 +661,23 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_auxadc;
}
- for (i = 0; i < MT8173_NUM_ZONES; i++)
+ for (i = 0; i < mt->conf->num_banks; i++)
mtk_thermal_init_bank(mt, i, apmixed_phys_base,
auxadc_phys_base);
platform_set_drvdata(pdev, mt);
- devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
+ tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
+ &mtk_thermal_ops);
+ if (IS_ERR(tzdev)) {
+ ret = PTR_ERR(tzdev);
+ goto err_disable_clk_peri_therm;
+ }
return 0;
+err_disable_clk_peri_therm:
+ clk_disable_unprepare(mt->clk_peri_therm);
err_disable_clk_auxadc:
clk_disable_unprepare(mt->clk_auxadc);
@@ -592,13 +694,6 @@ static int mtk_thermal_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id mtk_thermal_of_match[] = {
- {
- .compatible = "mediatek,mt8173-thermal",
- }, {
- },
-};
-
static struct platform_driver mtk_thermal_driver = {
.probe = mtk_thermal_probe,
.remove = mtk_thermal_remove,
@@ -610,6 +705,7 @@ static struct platform_driver mtk_thermal_driver = {
module_platform_driver(mtk_thermal_driver);
+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
MODULE_DESCRIPTION("Mediatek thermal driver");
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index b8e509c60848..d04ec3b9e5ff 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -101,6 +101,17 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz,
return data->ops->get_temp(data->sensor_data, temp);
}
+static int of_thermal_set_trips(struct thermal_zone_device *tz,
+ int low, int high)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data->ops || !data->ops->set_trips)
+ return -EINVAL;
+
+ return data->ops->set_trips(data->sensor_data, low, high);
+}
+
/**
* of_thermal_get_ntrips - function to export number of available trip
* points.
@@ -181,9 +192,6 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
{
struct __thermal_zone *data = tz->devdata;
- if (!data->ops || !data->ops->set_emul_temp)
- return -EINVAL;
-
return data->ops->set_emul_temp(data->sensor_data, temp);
}
@@ -191,25 +199,11 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
enum thermal_trend *trend)
{
struct __thermal_zone *data = tz->devdata;
- long dev_trend;
- int r;
if (!data->ops->get_trend)
return -EINVAL;
- r = data->ops->get_trend(data->sensor_data, &dev_trend);
- if (r)
- return r;
-
- /* TODO: These intervals might have some thresholds, but in core code */
- if (dev_trend > 0)
- *trend = THERMAL_TREND_RAISING;
- else if (dev_trend < 0)
- *trend = THERMAL_TREND_DROPPING;
- else
- *trend = THERMAL_TREND_STABLE;
-
- return 0;
+ return data->ops->get_trend(data->sensor_data, trip, trend);
}
static int of_thermal_bind(struct thermal_zone_device *thermal,
@@ -292,7 +286,7 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
mutex_unlock(&tz->lock);
data->mode = mode;
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return 0;
}
@@ -427,7 +421,17 @@ thermal_zone_of_add_sensor(struct device_node *zone,
tzd->ops->get_temp = of_thermal_get_temp;
tzd->ops->get_trend = of_thermal_get_trend;
- tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+
+ /*
+ * The thermal zone core will calculate the window if they have set the
+ * optional set_trips pointer.
+ */
+ if (ops->set_trips)
+ tzd->ops->set_trips = of_thermal_set_trips;
+
+ if (ops->set_emul_temp)
+ tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
+
mutex_unlock(&tzd->lock);
return tzd;
@@ -596,7 +600,7 @@ static int devm_thermal_zone_of_sensor_match(struct device *dev, void *res,
* Return: On success returns a valid struct thermal_zone_device,
* otherwise, it returns a corresponding ERR_PTR(). Caller must
* check the return value with help of IS_ERR() helper.
- * Registered hermal_zone_device device will automatically be
+ * Registered thermal_zone_device device will automatically be
* released when device is unbounded.
*/
struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c
index f8a3c60bef94..819c6d5d7aa7 100644
--- a/drivers/thermal/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom-spmi-temp-alarm.c
@@ -150,7 +150,7 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
{
struct qpnp_tm_chip *chip = data;
- thermal_zone_device_update(chip->tz_dev);
+ thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
new file mode 100644
index 000000000000..be32e5abce3c
--- /dev/null
+++ b/drivers/thermal/qcom/Kconfig
@@ -0,0 +1,11 @@
+config QCOM_TSENS
+ tristate "Qualcomm TSENS Temperature Alarm"
+ depends on THERMAL
+ depends on QCOM_QFPROM
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This enables the thermal sysfs driver for the TSENS device. It shows
+ up in Sysfs as a thermal zone with multiple trip points. Disabling the
+ thermal zone device via the mode file results in disabling the sensor.
+ Also able to set threshold temperature for both hot and cold and update
+ when a threshold is reached.
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
new file mode 100644
index 000000000000..2cc2193637e7
--- /dev/null
+++ b/drivers/thermal/qcom/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c
new file mode 100644
index 000000000000..fdf561b8b81d
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8916.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8916 */
+#define BASE0_MASK 0x0000007f
+#define BASE1_MASK 0xfe000000
+#define BASE0_SHIFT 0
+#define BASE1_SHIFT 25
+
+#define S0_P1_MASK 0x00000f80
+#define S1_P1_MASK 0x003e0000
+#define S2_P1_MASK 0xf8000000
+#define S3_P1_MASK 0x000003e0
+#define S4_P1_MASK 0x000f8000
+
+#define S0_P2_MASK 0x0001f000
+#define S1_P2_MASK 0x07c00000
+#define S2_P2_MASK 0x0000001f
+#define S3_P2_MASK 0x00007c00
+#define S4_P2_MASK 0x01f00000
+
+#define S0_P1_SHIFT 7
+#define S1_P1_SHIFT 17
+#define S2_P1_SHIFT 27
+#define S3_P1_SHIFT 5
+#define S4_P1_SHIFT 15
+
+#define S0_P2_SHIFT 12
+#define S1_P2_SHIFT 22
+#define S2_P2_SHIFT 0
+#define S3_P2_SHIFT 10
+#define S4_P2_SHIFT 20
+
+#define CAL_SEL_MASK 0xe0000000
+#define CAL_SEL_SHIFT 29
+
+static int calibrate_8916(struct tsens_device *tmdev)
+{
+ int base0 = 0, base1 = 0, i;
+ u32 p1[5], p2[5];
+ int mode = 0;
+ u32 *qfprom_cdata, *qfprom_csel;
+
+ qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(qfprom_cdata))
+ return PTR_ERR(qfprom_cdata);
+
+ qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel");
+ if (IS_ERR(qfprom_csel))
+ return PTR_ERR(qfprom_csel);
+
+ mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT;
+ dev_dbg(tmdev->dev, "calibration mode is %d\n", mode);
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT;
+ p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT;
+ p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT;
+ p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = ((base1 + p2[i]) << 3);
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ base0 = (qfprom_cdata[0] & BASE0_MASK);
+ p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT;
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] = (((base0) + p1[i]) << 3);
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] = 500;
+ p2[i] = 780;
+ }
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+static const struct tsens_ops ops_8916 = {
+ .init = init_common,
+ .calibrate = calibrate_8916,
+ .get_temp = get_temp_common,
+};
+
+const struct tsens_data data_8916 = {
+ .num_sensors = 5,
+ .ops = &ops_8916,
+ .hw_ids = (unsigned int []){0, 1, 2, 4, 5 },
+};
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
new file mode 100644
index 000000000000..0451277d3a8f
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -0,0 +1,292 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include "tsens.h"
+
+#define CAL_MDEGC 30000
+
+#define CONFIG_ADDR 0x3640
+#define CONFIG_ADDR_8660 0x3620
+/* CONFIG_ADDR bitmasks */
+#define CONFIG 0x9b
+#define CONFIG_MASK 0xf
+#define CONFIG_8660 1
+#define CONFIG_SHIFT_8660 28
+#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660)
+
+#define STATUS_CNTL_ADDR_8064 0x3660
+#define CNTL_ADDR 0x3620
+/* CNTL_ADDR bitmasks */
+#define EN BIT(0)
+#define SW_RST BIT(1)
+#define SENSOR0_EN BIT(3)
+#define SLP_CLK_ENA BIT(26)
+#define SLP_CLK_ENA_8660 BIT(24)
+#define MEASURE_PERIOD 1
+#define SENSOR0_SHIFT 3
+
+/* INT_STATUS_ADDR bitmasks */
+#define MIN_STATUS_MASK BIT(0)
+#define LOWER_STATUS_CLR BIT(1)
+#define UPPER_STATUS_CLR BIT(2)
+#define MAX_STATUS_MASK BIT(3)
+
+#define THRESHOLD_ADDR 0x3624
+/* THRESHOLD_ADDR bitmasks */
+#define THRESHOLD_MAX_LIMIT_SHIFT 24
+#define THRESHOLD_MIN_LIMIT_SHIFT 16
+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
+
+/* Initial temperature threshold values */
+#define LOWER_LIMIT_TH 0x50
+#define UPPER_LIMIT_TH 0xdf
+#define MIN_LIMIT_TH 0x0
+#define MAX_LIMIT_TH 0xff
+
+#define S0_STATUS_ADDR 0x3628
+#define INT_STATUS_ADDR 0x363c
+#define TRDY_MASK BIT(7)
+#define TIMEOUT_US 100
+
+static int suspend_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ unsigned int mask;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ mask = SLP_CLK_ENA | EN;
+ else
+ mask = SLP_CLK_ENA_8660 | EN;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int resume_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ struct regmap *map = tmdev->map;
+
+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
+ if (ret)
+ return ret;
+
+ /*
+ * Separate CONFIG restore is not needed only for 8660 as
+ * config is part of CTRL Addr and its restored as such
+ */
+ if (tmdev->num_sensors > 1) {
+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int enable_8960(struct tsens_device *tmdev, int id)
+{
+ int ret;
+ u32 reg, mask;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, &reg);
+ if (ret)
+ return ret;
+
+ mask = BIT(id + SENSOR0_SHIFT);
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1)
+ reg |= mask | SLP_CLK_ENA | EN;
+ else
+ reg |= mask | SLP_CLK_ENA_8660 | EN;
+
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void disable_8960(struct tsens_device *tmdev)
+{
+ int ret;
+ u32 reg_cntl;
+ u32 mask;
+
+ mask = GENMASK(tmdev->num_sensors - 1, 0);
+ mask <<= SENSOR0_SHIFT;
+ mask |= EN;
+
+ ret = regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
+ if (ret)
+ return;
+
+ reg_cntl &= ~mask;
+
+ if (tmdev->num_sensors > 1)
+ reg_cntl &= ~SLP_CLK_ENA;
+ else
+ reg_cntl &= ~SLP_CLK_ENA_8660;
+
+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+}
+
+static int init_8960(struct tsens_device *tmdev)
+{
+ int ret, i;
+ u32 reg_cntl;
+
+ tmdev->map = dev_get_regmap(tmdev->dev, NULL);
+ if (!tmdev->map)
+ return -ENODEV;
+
+ /*
+ * The status registers for each sensor are discontiguous
+ * because some SoCs have 5 sensors while others have more
+ * but the control registers stay in the same place, i.e
+ * directly after the first 5 status registers.
+ */
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (i >= 5)
+ tmdev->sensor[i].status = S0_STATUS_ADDR + 40;
+ tmdev->sensor[i].status += i * 4;
+ }
+
+ reg_cntl = SW_RST;
+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
+ if (ret)
+ return ret;
+
+ if (tmdev->num_sensors > 1) {
+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
+ reg_cntl &= ~SW_RST;
+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
+ CONFIG_MASK, CONFIG);
+ } else {
+ reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
+ reg_cntl &= ~CONFIG_MASK_8660;
+ reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
+ }
+
+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ reg_cntl |= EN;
+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int calibrate_8960(struct tsens_device *tmdev)
+{
+ int i;
+ char *data;
+
+ ssize_t num_read = tmdev->num_sensors;
+ struct tsens_sensor *s = tmdev->sensor;
+
+ data = qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(data))
+ data = qfprom_read(tmdev->dev, "calib_backup");
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ for (i = 0; i < num_read; i++, s++)
+ s->offset = data[i];
+
+ return 0;
+}
+
+/* Temperature on y axis and ADC-code on x-axis */
+static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
+{
+ int slope, offset;
+
+ slope = thermal_zone_get_slope(s->tzd);
+ offset = CAL_MDEGC - slope * s->offset;
+
+ return adc_code * slope + offset;
+}
+
+static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
+{
+ int ret;
+ u32 code, trdy;
+ const struct tsens_sensor *s = &tmdev->sensor[id];
+ unsigned long timeout;
+
+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+ do {
+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+ if (ret)
+ return ret;
+ if (!(trdy & TRDY_MASK))
+ continue;
+ ret = regmap_read(tmdev->map, s->status, &code);
+ if (ret)
+ return ret;
+ *temp = code_to_mdegC(code, s);
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -ETIMEDOUT;
+}
+
+static const struct tsens_ops ops_8960 = {
+ .init = init_8960,
+ .calibrate = calibrate_8960,
+ .get_temp = get_temp_8960,
+ .enable = enable_8960,
+ .disable = disable_8960,
+ .suspend = suspend_8960,
+ .resume = resume_8960,
+};
+
+const struct tsens_data data_8960 = {
+ .num_sensors = 11,
+ .ops = &ops_8960,
+};
diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c
new file mode 100644
index 000000000000..9baf77e8cbe3
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8974.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include "tsens.h"
+
+/* eeprom layout data for 8974 */
+#define BASE1_MASK 0xff
+#define S0_P1_MASK 0x3f00
+#define S1_P1_MASK 0xfc000
+#define S2_P1_MASK 0x3f00000
+#define S3_P1_MASK 0xfc000000
+#define S4_P1_MASK 0x3f
+#define S5_P1_MASK 0xfc0
+#define S6_P1_MASK 0x3f000
+#define S7_P1_MASK 0xfc0000
+#define S8_P1_MASK 0x3f000000
+#define S8_P1_MASK_BKP 0x3f
+#define S9_P1_MASK 0x3f
+#define S9_P1_MASK_BKP 0xfc0
+#define S10_P1_MASK 0xfc0
+#define S10_P1_MASK_BKP 0x3f000
+#define CAL_SEL_0_1 0xc0000000
+#define CAL_SEL_2 0x40000000
+#define CAL_SEL_SHIFT 30
+#define CAL_SEL_SHIFT_2 28
+
+#define S0_P1_SHIFT 8
+#define S1_P1_SHIFT 14
+#define S2_P1_SHIFT 20
+#define S3_P1_SHIFT 26
+#define S5_P1_SHIFT 6
+#define S6_P1_SHIFT 12
+#define S7_P1_SHIFT 18
+#define S8_P1_SHIFT 24
+#define S9_P1_BKP_SHIFT 6
+#define S10_P1_SHIFT 6
+#define S10_P1_BKP_SHIFT 12
+
+#define BASE2_SHIFT 12
+#define BASE2_BKP_SHIFT 18
+#define S0_P2_SHIFT 20
+#define S0_P2_BKP_SHIFT 26
+#define S1_P2_SHIFT 26
+#define S2_P2_BKP_SHIFT 6
+#define S3_P2_SHIFT 6
+#define S3_P2_BKP_SHIFT 12
+#define S4_P2_SHIFT 12
+#define S4_P2_BKP_SHIFT 18
+#define S5_P2_SHIFT 18
+#define S5_P2_BKP_SHIFT 24
+#define S6_P2_SHIFT 24
+#define S7_P2_BKP_SHIFT 6
+#define S8_P2_SHIFT 6
+#define S8_P2_BKP_SHIFT 12
+#define S9_P2_SHIFT 12
+#define S9_P2_BKP_SHIFT 18
+#define S10_P2_SHIFT 18
+#define S10_P2_BKP_SHIFT 24
+
+#define BASE2_MASK 0xff000
+#define BASE2_BKP_MASK 0xfc0000
+#define S0_P2_MASK 0x3f00000
+#define S0_P2_BKP_MASK 0xfc000000
+#define S1_P2_MASK 0xfc000000
+#define S1_P2_BKP_MASK 0x3f
+#define S2_P2_MASK 0x3f
+#define S2_P2_BKP_MASK 0xfc0
+#define S3_P2_MASK 0xfc0
+#define S3_P2_BKP_MASK 0x3f000
+#define S4_P2_MASK 0x3f000
+#define S4_P2_BKP_MASK 0xfc0000
+#define S5_P2_MASK 0xfc0000
+#define S5_P2_BKP_MASK 0x3f000000
+#define S6_P2_MASK 0x3f000000
+#define S6_P2_BKP_MASK 0x3f
+#define S7_P2_MASK 0x3f
+#define S7_P2_BKP_MASK 0xfc0
+#define S8_P2_MASK 0xfc0
+#define S8_P2_BKP_MASK 0x3f000
+#define S9_P2_MASK 0x3f000
+#define S9_P2_BKP_MASK 0xfc0000
+#define S10_P2_MASK 0xfc0000
+#define S10_P2_BKP_MASK 0x3f000000
+
+#define BKP_SEL 0x3
+#define BKP_REDUN_SEL 0xe0000000
+#define BKP_REDUN_SHIFT 29
+
+#define BIT_APPEND 0x3
+
+static int calibrate_8974(struct tsens_device *tmdev)
+{
+ int base1 = 0, base2 = 0, i;
+ u32 p1[11], p2[11];
+ int mode = 0;
+ u32 *calib, *bkp;
+ u32 calib_redun_sel;
+
+ calib = (u32 *)qfprom_read(tmdev->dev, "calib");
+ if (IS_ERR(calib))
+ return PTR_ERR(calib);
+
+ bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup");
+ if (IS_ERR(bkp))
+ return PTR_ERR(bkp);
+
+ calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
+ calib_redun_sel >>= BKP_REDUN_SHIFT;
+
+ if (calib_redun_sel == BKP_SEL) {
+ mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+ mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT;
+ p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT;
+ p2[1] = (bkp[3] & S1_P2_BKP_MASK);
+ p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT;
+ p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT;
+ p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT;
+ p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT;
+ p2[6] = (calib[5] & S6_P2_BKP_MASK);
+ p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT;
+ p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT;
+ p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT;
+ p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT;
+ /* Fall through */
+ case ONE_PT_CALIB:
+ case ONE_PT_CALIB2:
+ base1 = bkp[0] & BASE1_MASK;
+ p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (bkp[1] & S4_P1_MASK);
+ p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT;
+ p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT;
+ p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT;
+ break;
+ }
+ } else {
+ mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT;
+ mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2;
+
+ switch (mode) {
+ case TWO_PT_CALIB:
+ base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT;
+ p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT;
+ p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT;
+ p2[2] = (calib[3] & S2_P2_MASK);
+ p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT;
+ p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT;
+ p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT;
+ p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT;
+ p2[7] = (calib[4] & S7_P2_MASK);
+ p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT;
+ p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT;
+ p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT;
+ /* Fall through */
+ case ONE_PT_CALIB:
+ case ONE_PT_CALIB2:
+ base1 = calib[0] & BASE1_MASK;
+ p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT;
+ p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT;
+ p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT;
+ p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT;
+ p1[4] = (calib[1] & S4_P1_MASK);
+ p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT;
+ p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT;
+ p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT;
+ p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT;
+ p1[9] = (calib[2] & S9_P1_MASK);
+ p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT;
+ break;
+ }
+ }
+
+ switch (mode) {
+ case ONE_PT_CALIB:
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p1[i] += (base1 << 2) | BIT_APPEND;
+ break;
+ case TWO_PT_CALIB:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p2[i] += base2;
+ p2[i] <<= 2;
+ p2[i] |= BIT_APPEND;
+ }
+ /* Fall through */
+ case ONE_PT_CALIB2:
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ p1[i] += base1;
+ p1[i] <<= 2;
+ p1[i] |= BIT_APPEND;
+ }
+ break;
+ default:
+ for (i = 0; i < tmdev->num_sensors; i++)
+ p2[i] = 780;
+ p1[0] = 502;
+ p1[1] = 509;
+ p1[2] = 503;
+ p1[3] = 509;
+ p1[4] = 505;
+ p1[5] = 509;
+ p1[6] = 507;
+ p1[7] = 510;
+ p1[8] = 508;
+ p1[9] = 509;
+ p1[10] = 508;
+ break;
+ }
+
+ compute_intercept_slope(tmdev, p1, p2, mode);
+
+ return 0;
+}
+
+static const struct tsens_ops ops_8974 = {
+ .init = init_common,
+ .calibrate = calibrate_8974,
+ .get_temp = get_temp_common,
+};
+
+const struct tsens_data data_8974 = {
+ .num_sensors = 11,
+ .ops = &ops_8974,
+};
diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c
new file mode 100644
index 000000000000..e1f77818d8fa
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-8996.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "tsens.h"
+
+#define STATUS_OFFSET 0x10a0
+#define LAST_TEMP_MASK 0xfff
+#define STATUS_VALID_BIT BIT(21)
+#define CODE_SIGN_BIT BIT(11)
+
+static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
+{
+ struct tsens_sensor *s = &tmdev->sensor[id];
+ u32 code;
+ unsigned int sensor_addr;
+ int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
+
+ sensor_addr = STATUS_OFFSET + s->hw_id * 4;
+ ret = regmap_read(tmdev->map, sensor_addr, &code);
+ if (ret)
+ return ret;
+ last_temp = code & LAST_TEMP_MASK;
+ if (code & STATUS_VALID_BIT)
+ goto done;
+
+ /* Try a second time */
+ ret = regmap_read(tmdev->map, sensor_addr, &code);
+ if (ret)
+ return ret;
+ if (code & STATUS_VALID_BIT) {
+ last_temp = code & LAST_TEMP_MASK;
+ goto done;
+ } else {
+ last_temp2 = code & LAST_TEMP_MASK;
+ }
+
+ /* Try a third/last time */
+ ret = regmap_read(tmdev->map, sensor_addr, &code);
+ if (ret)
+ return ret;
+ if (code & STATUS_VALID_BIT) {
+ last_temp = code & LAST_TEMP_MASK;
+ goto done;
+ } else {
+ last_temp3 = code & LAST_TEMP_MASK;
+ }
+
+ if (last_temp == last_temp2)
+ last_temp = last_temp2;
+ else if (last_temp2 == last_temp3)
+ last_temp = last_temp3;
+done:
+ /* Code sign bit is the sign extension for a negative value */
+ if (last_temp & CODE_SIGN_BIT)
+ last_temp |= ~CODE_SIGN_BIT;
+
+ /* Temperatures are in deciCelicius */
+ *temp = last_temp * 100;
+
+ return 0;
+}
+
+static const struct tsens_ops ops_8996 = {
+ .init = init_common,
+ .get_temp = get_temp_8996,
+};
+
+const struct tsens_data data_8996 = {
+ .num_sensors = 13,
+ .ops = &ops_8996,
+};
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
new file mode 100644
index 000000000000..b1449ad67fc0
--- /dev/null
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "tsens.h"
+
+#define S0_ST_ADDR 0x1030
+#define SN_ADDR_OFFSET 0x4
+#define SN_ST_TEMP_MASK 0x3ff
+#define CAL_DEGC_PT1 30
+#define CAL_DEGC_PT2 120
+#define SLOPE_FACTOR 1000
+#define SLOPE_DEFAULT 3200
+
+char *qfprom_read(struct device *dev, const char *cname)
+{
+ struct nvmem_cell *cell;
+ ssize_t data;
+ char *ret;
+
+ cell = nvmem_cell_get(dev, cname);
+ if (IS_ERR(cell))
+ return ERR_CAST(cell);
+
+ ret = nvmem_cell_read(cell, &data);
+ nvmem_cell_put(cell);
+
+ return ret;
+}
+
+/*
+ * Use this function on devices where slope and offset calculations
+ * depend on calibration data read from qfprom. On others the slope
+ * and offset values are derived from tz->tzp->slope and tz->tzp->offset
+ * resp.
+ */
+void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
+ u32 *p2, u32 mode)
+{
+ int i;
+ int num, den;
+
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ dev_dbg(tmdev->dev,
+ "sensor%d - data_point1:%#x data_point2:%#x\n",
+ i, p1[i], p2[i]);
+
+ tmdev->sensor[i].slope = SLOPE_DEFAULT;
+ if (mode == TWO_PT_CALIB) {
+ /*
+ * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
+ * temp_120_degc - temp_30_degc (x2 - x1)
+ */
+ num = p2[i] - p1[i];
+ num *= SLOPE_FACTOR;
+ den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
+ tmdev->sensor[i].slope = num / den;
+ }
+
+ tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
+ (CAL_DEGC_PT1 *
+ tmdev->sensor[i].slope);
+ dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset);
+ }
+}
+
+static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
+{
+ int degc, num, den;
+
+ num = (adc_code * SLOPE_FACTOR) - s->offset;
+ den = s->slope;
+
+ if (num > 0)
+ degc = num + (den / 2);
+ else if (num < 0)
+ degc = num - (den / 2);
+ else
+ degc = num;
+
+ degc /= den;
+
+ return degc;
+}
+
+int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
+{
+ struct tsens_sensor *s = &tmdev->sensor[id];
+ u32 code;
+ unsigned int sensor_addr;
+ int last_temp = 0, ret;
+
+ sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+ ret = regmap_read(tmdev->map, sensor_addr, &code);
+ if (ret)
+ return ret;
+ last_temp = code & SN_ST_TEMP_MASK;
+
+ *temp = code_to_degc(last_temp, s) * 1000;
+
+ return 0;
+}
+
+static const struct regmap_config tsens_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+int __init init_common(struct tsens_device *tmdev)
+{
+ void __iomem *base;
+
+ base = of_iomap(tmdev->dev->of_node, 0);
+ if (!base)
+ return -EINVAL;
+
+ tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
+ if (IS_ERR(tmdev->map)) {
+ iounmap(base);
+ return PTR_ERR(tmdev->map);
+ }
+
+ return 0;
+}
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
new file mode 100644
index 000000000000..3f9fe6aa51cc
--- /dev/null
+++ b/drivers/thermal/qcom/tsens.c
@@ -0,0 +1,200 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include "tsens.h"
+
+static int tsens_get_temp(void *data, int *temp)
+{
+ const struct tsens_sensor *s = data;
+ struct tsens_device *tmdev = s->tmdev;
+
+ return tmdev->ops->get_temp(tmdev, s->id, temp);
+}
+
+static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
+{
+ const struct tsens_sensor *s = p;
+ struct tsens_device *tmdev = s->tmdev;
+
+ if (tmdev->ops->get_trend)
+ return tmdev->ops->get_trend(tmdev, s->id, trend);
+
+ return -ENOTSUPP;
+}
+
+static int __maybe_unused tsens_suspend(struct device *dev)
+{
+ struct tsens_device *tmdev = dev_get_drvdata(dev);
+
+ if (tmdev->ops && tmdev->ops->suspend)
+ return tmdev->ops->suspend(tmdev);
+
+ return 0;
+}
+
+static int __maybe_unused tsens_resume(struct device *dev)
+{
+ struct tsens_device *tmdev = dev_get_drvdata(dev);
+
+ if (tmdev->ops && tmdev->ops->resume)
+ return tmdev->ops->resume(tmdev);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
+
+static const struct of_device_id tsens_table[] = {
+ {
+ .compatible = "qcom,msm8916-tsens",
+ .data = &data_8916,
+ }, {
+ .compatible = "qcom,msm8974-tsens",
+ .data = &data_8974,
+ }, {
+ .compatible = "qcom,msm8996-tsens",
+ .data = &data_8996,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, tsens_table);
+
+static const struct thermal_zone_of_device_ops tsens_of_ops = {
+ .get_temp = tsens_get_temp,
+ .get_trend = tsens_get_trend,
+};
+
+static int tsens_register(struct tsens_device *tmdev)
+{
+ int i;
+ struct thermal_zone_device *tzd;
+ u32 *hw_id, n = tmdev->num_sensors;
+
+ hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL);
+ if (!hw_id)
+ return -ENOMEM;
+
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ tmdev->sensor[i].tmdev = tmdev;
+ tmdev->sensor[i].id = i;
+ tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i,
+ &tmdev->sensor[i],
+ &tsens_of_ops);
+ if (IS_ERR(tzd))
+ continue;
+ tmdev->sensor[i].tzd = tzd;
+ if (tmdev->ops->enable)
+ tmdev->ops->enable(tmdev, i);
+ }
+ return 0;
+}
+
+static int tsens_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct device *dev;
+ struct device_node *np;
+ struct tsens_sensor *s;
+ struct tsens_device *tmdev;
+ const struct tsens_data *data;
+ const struct of_device_id *id;
+
+ if (pdev->dev.of_node)
+ dev = &pdev->dev;
+ else
+ dev = pdev->dev.parent;
+
+ np = dev->of_node;
+
+ id = of_match_node(tsens_table, np);
+ if (id)
+ data = id->data;
+ else
+ data = &data_8960;
+
+ if (data->num_sensors <= 0) {
+ dev_err(dev, "invalid number of sensors\n");
+ return -EINVAL;
+ }
+
+ tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
+ data->num_sensors * sizeof(*s), GFP_KERNEL);
+ if (!tmdev)
+ return -ENOMEM;
+
+ tmdev->dev = dev;
+ tmdev->num_sensors = data->num_sensors;
+ tmdev->ops = data->ops;
+ for (i = 0; i < tmdev->num_sensors; i++) {
+ if (data->hw_ids)
+ tmdev->sensor[i].hw_id = data->hw_ids[i];
+ else
+ tmdev->sensor[i].hw_id = i;
+ }
+
+ if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp)
+ return -EINVAL;
+
+ ret = tmdev->ops->init(tmdev);
+ if (ret < 0) {
+ dev_err(dev, "tsens init failed\n");
+ return ret;
+ }
+
+ if (tmdev->ops->calibrate) {
+ ret = tmdev->ops->calibrate(tmdev);
+ if (ret < 0) {
+ dev_err(dev, "tsens calibration failed\n");
+ return ret;
+ }
+ }
+
+ ret = tsens_register(tmdev);
+
+ platform_set_drvdata(pdev, tmdev);
+
+ return ret;
+}
+
+static int tsens_remove(struct platform_device *pdev)
+{
+ struct tsens_device *tmdev = platform_get_drvdata(pdev);
+
+ if (tmdev->ops->disable)
+ tmdev->ops->disable(tmdev);
+
+ return 0;
+}
+
+static struct platform_driver tsens_driver = {
+ .probe = tsens_probe,
+ .remove = tsens_remove,
+ .driver = {
+ .name = "qcom-tsens",
+ .pm = &tsens_pm_ops,
+ .of_match_table = tsens_table,
+ },
+};
+module_platform_driver(tsens_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QCOM Temperature Sensor driver");
+MODULE_ALIAS("platform:qcom-tsens");
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
new file mode 100644
index 000000000000..911c1978892b
--- /dev/null
+++ b/drivers/thermal/qcom/tsens.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_TSENS_H__
+#define __QCOM_TSENS_H__
+
+#define ONE_PT_CALIB 0x1
+#define ONE_PT_CALIB2 0x2
+#define TWO_PT_CALIB 0x3
+
+#include <linux/thermal.h>
+
+struct tsens_device;
+
+struct tsens_sensor {
+ struct tsens_device *tmdev;
+ struct thermal_zone_device *tzd;
+ int offset;
+ int id;
+ int hw_id;
+ int slope;
+ u32 status;
+};
+
+/**
+ * struct tsens_ops - operations as supported by the tsens device
+ * @init: Function to initialize the tsens device
+ * @calibrate: Function to calibrate the tsens device
+ * @get_temp: Function which returns the temp in millidegC
+ * @enable: Function to enable (clocks/power) tsens device
+ * @disable: Function to disable the tsens device
+ * @suspend: Function to suspend the tsens device
+ * @resume: Function to resume the tsens device
+ * @get_trend: Function to get the thermal/temp trend
+ */
+struct tsens_ops {
+ /* mandatory callbacks */
+ int (*init)(struct tsens_device *);
+ int (*calibrate)(struct tsens_device *);
+ int (*get_temp)(struct tsens_device *, int, int *);
+ /* optional callbacks */
+ int (*enable)(struct tsens_device *, int);
+ void (*disable)(struct tsens_device *);
+ int (*suspend)(struct tsens_device *);
+ int (*resume)(struct tsens_device *);
+ int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
+};
+
+/**
+ * struct tsens_data - tsens instance specific data
+ * @num_sensors: Max number of sensors supported by platform
+ * @ops: operations the tsens instance supports
+ * @hw_ids: Subset of sensors ids supported by platform, if not the first n
+ */
+struct tsens_data {
+ const u32 num_sensors;
+ const struct tsens_ops *ops;
+ unsigned int *hw_ids;
+};
+
+/* Registers to be saved/restored across a context loss */
+struct tsens_context {
+ int threshold;
+ int control;
+};
+
+struct tsens_device {
+ struct device *dev;
+ u32 num_sensors;
+ struct regmap *map;
+ struct regmap_field *status_field;
+ struct tsens_context ctx;
+ bool trdy;
+ const struct tsens_ops *ops;
+ struct tsens_sensor sensor[0];
+};
+
+char *qfprom_read(struct device *, const char *);
+void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
+int init_common(struct tsens_device *);
+int get_temp_common(struct tsens_device *, int, int *);
+
+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+
+#endif /* __QCOM_TSENS_H__ */
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
new file mode 100644
index 000000000000..644ba526d9ea
--- /dev/null
+++ b/drivers/thermal/qoriq_thermal.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define SITES_MAX 16
+
+/*
+ * QorIQ TMU Registers
+ */
+struct qoriq_tmu_site_regs {
+ u32 tritsr; /* Immediate Temperature Site Register */
+ u32 tratsr; /* Average Temperature Site Register */
+ u8 res0[0x8];
+};
+
+struct qoriq_tmu_regs {
+ u32 tmr; /* Mode Register */
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+ u32 tsr; /* Status Register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+#define TMTMIR_DEFAULT 0x0000000f
+ u8 res0[0x14];
+ u32 tier; /* Interrupt Enable Register */
+#define TIER_DISABLE 0x0
+ u32 tidr; /* Interrupt Detect Register */
+ u32 tiscr; /* Interrupt Site Capture Register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u8 res1[0x10];
+ u32 tmhtcrh; /* High Temperature Capture Register */
+ u32 tmhtcrl; /* Low Temperature Capture Register */
+ u8 res2[0x8];
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u8 res3[0x24];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res4[0x78];
+ struct qoriq_tmu_site_regs site[SITES_MAX];
+ u8 res5[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res6[0x310];
+ u32 ttr0cr; /* Temperature Range 0 Control Register */
+ u32 ttr1cr; /* Temperature Range 1 Control Register */
+ u32 ttr2cr; /* Temperature Range 2 Control Register */
+ u32 ttr3cr; /* Temperature Range 3 Control Register */
+};
+
+/*
+ * Thermal zone data
+ */
+struct qoriq_tmu_data {
+ struct thermal_zone_device *tz;
+ struct qoriq_tmu_regs __iomem *regs;
+ int sensor_id;
+ bool little_endian;
+};
+
+static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
+{
+ if (p->little_endian)
+ iowrite32(val, addr);
+ else
+ iowrite32be(val, addr);
+}
+
+static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
+{
+ if (p->little_endian)
+ return ioread32(addr);
+ else
+ return ioread32be(addr);
+}
+
+static int tmu_get_temp(void *p, int *temp)
+{
+ u32 val;
+ struct qoriq_tmu_data *data = p;
+
+ val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
+ *temp = (val & 0xff) * 1000;
+
+ return 0;
+}
+
+static int qoriq_tmu_get_sensor_id(void)
+{
+ int ret, id;
+ struct of_phandle_args sensor_specs;
+ struct device_node *np, *sensor_np;
+
+ np = of_find_node_by_name(NULL, "thermal-zones");
+ if (!np)
+ return -ENODEV;
+
+ sensor_np = of_get_next_child(np, NULL);
+ ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, &sensor_specs);
+ if (ret) {
+ of_node_put(np);
+ of_node_put(sensor_np);
+ return ret;
+ }
+
+ if (sensor_specs.args_count >= 1) {
+ id = sensor_specs.args[0];
+ WARN(sensor_specs.args_count > 1,
+ "%s: too many cells in sensor specifier %d\n",
+ sensor_specs.np->name, sensor_specs.args_count);
+ } else {
+ id = 0;
+ }
+
+ of_node_put(np);
+ of_node_put(sensor_np);
+
+ return id;
+}
+
+static int qoriq_tmu_calibration(struct platform_device *pdev)
+{
+ int i, val, len;
+ u32 range[4];
+ const u32 *calibration;
+ struct device_node *np = pdev->dev.of_node;
+ struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+
+ if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) {
+ dev_err(&pdev->dev, "missing calibration range.\n");
+ return -ENODEV;
+ }
+
+ /* Init temperature range registers */
+ tmu_write(data, range[0], &data->regs->ttr0cr);
+ tmu_write(data, range[1], &data->regs->ttr1cr);
+ tmu_write(data, range[2], &data->regs->ttr2cr);
+ tmu_write(data, range[3], &data->regs->ttr3cr);
+
+ calibration = of_get_property(np, "fsl,tmu-calibration", &len);
+ if (calibration == NULL || len % 8) {
+ dev_err(&pdev->dev, "invalid calibration data.\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < len; i += 8, calibration += 2) {
+ val = of_read_number(calibration, 1);
+ tmu_write(data, val, &data->regs->ttcfgr);
+ val = of_read_number(calibration + 1, 1);
+ tmu_write(data, val, &data->regs->tscfgr);
+ }
+
+ return 0;
+}
+
+static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
+{
+ /* Disable interrupt, using polling instead */
+ tmu_write(data, TIER_DISABLE, &data->regs->tier);
+
+ /* Set update_interval */
+ tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
+
+ /* Disable monitoring */
+ tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+}
+
+static struct thermal_zone_of_device_ops tmu_tz_ops = {
+ .get_temp = tmu_get_temp,
+};
+
+static int qoriq_tmu_probe(struct platform_device *pdev)
+{
+ int ret;
+ const struct thermal_trip *trip;
+ struct qoriq_tmu_data *data;
+ struct device_node *np = pdev->dev.of_node;
+ u32 site = 0;
+
+ if (!np) {
+ dev_err(&pdev->dev, "Device OF-Node is NULL");
+ return -ENODEV;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, data);
+
+ data->little_endian = of_property_read_bool(np, "little-endian");
+
+ data->sensor_id = qoriq_tmu_get_sensor_id();
+ if (data->sensor_id < 0) {
+ dev_err(&pdev->dev, "Failed to get sensor id\n");
+ ret = -ENODEV;
+ goto err_iomap;
+ }
+
+ data->regs = of_iomap(np, 0);
+ if (!data->regs) {
+ dev_err(&pdev->dev, "Failed to get memory region\n");
+ ret = -ENODEV;
+ goto err_iomap;
+ }
+
+ qoriq_tmu_init_device(data); /* TMU initialization */
+
+ ret = qoriq_tmu_calibration(pdev); /* TMU calibration */
+ if (ret < 0)
+ goto err_tmu;
+
+ data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id,
+ data, &tmu_tz_ops);
+ if (IS_ERR(data->tz)) {
+ ret = PTR_ERR(data->tz);
+ dev_err(&pdev->dev,
+ "Failed to register thermal zone device %d\n", ret);
+ goto err_tmu;
+ }
+
+ trip = of_thermal_get_trip_points(data->tz);
+
+ /* Enable monitoring */
+ site |= 0x1 << (15 - data->sensor_id);
+ tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
+
+ return 0;
+
+err_tmu:
+ iounmap(data->regs);
+
+err_iomap:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int qoriq_tmu_remove(struct platform_device *pdev)
+{
+ struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
+
+ thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
+
+ /* Disable monitoring */
+ tmu_write(data, TMR_DISABLE, &data->regs->tmr);
+
+ iounmap(data->regs);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qoriq_tmu_suspend(struct device *dev)
+{
+ u32 tmr;
+ struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+ /* Disable monitoring */
+ tmr = tmu_read(data, &data->regs->tmr);
+ tmr &= ~TMR_ME;
+ tmu_write(data, tmr, &data->regs->tmr);
+
+ return 0;
+}
+
+static int qoriq_tmu_resume(struct device *dev)
+{
+ u32 tmr;
+ struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+ /* Enable monitoring */
+ tmr = tmu_read(data, &data->regs->tmr);
+ tmr |= TMR_ME;
+ tmu_write(data, tmr, &data->regs->tmr);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
+ qoriq_tmu_suspend, qoriq_tmu_resume);
+
+static const struct of_device_id qoriq_tmu_match[] = {
+ { .compatible = "fsl,qoriq-tmu", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
+
+static struct platform_driver qoriq_tmu = {
+ .driver = {
+ .name = "qoriq_thermal",
+ .pm = &qoriq_tmu_pm_ops,
+ .of_match_table = qoriq_tmu_match,
+ },
+ .probe = qoriq_tmu_probe,
+ .remove = qoriq_tmu_remove,
+};
+module_platform_driver(qoriq_tmu);
+
+MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>");
+MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 5f817923f374..73e5fee6cf1d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -31,6 +31,8 @@
#include <linux/spinlock.h>
#include <linux/thermal.h>
+#include "thermal_hwmon.h"
+
#define IDLE_INTERVAL 5000
#define COMMON_STR 0x00
@@ -75,6 +77,8 @@ struct rcar_thermal_priv {
#define rcar_priv_to_dev(priv) ((priv)->common->dev)
#define rcar_has_irq_support(priv) ((priv)->common->base)
#define rcar_id_to_shift(priv) ((priv)->id * 8)
+#define rcar_of_data(dev) ((unsigned long)of_device_get_match_data(dev))
+#define rcar_use_of_thermal(dev) (rcar_of_data(dev) == USE_OF_THERMAL)
#define USE_OF_THERMAL 1
static const struct of_device_id rcar_thermal_dt_ids[] = {
@@ -354,7 +358,8 @@ static void rcar_thermal_work(struct work_struct *work)
return;
if (nctemp != cctemp)
- thermal_zone_device_update(priv->zone);
+ thermal_zone_device_update(priv->zone,
+ THERMAL_EVENT_UNSPECIFIED);
}
static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
@@ -415,7 +420,10 @@ static int rcar_thermal_remove(struct platform_device *pdev)
rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
- thermal_zone_device_unregister(priv->zone);
+ if (rcar_use_of_thermal(dev))
+ thermal_remove_hwmon_sysfs(priv->zone);
+ else
+ thermal_zone_device_unregister(priv->zone);
}
pm_runtime_put(dev);
@@ -430,7 +438,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
struct rcar_thermal_priv *priv;
struct device *dev = &pdev->dev;
struct resource *res, *irq;
- unsigned long of_data = (unsigned long)of_device_get_match_data(dev);
int mres = 0;
int i;
int ret = -ENODEV;
@@ -491,7 +498,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
if (ret < 0)
goto error_unregister;
- if (of_data == USE_OF_THERMAL)
+ if (rcar_use_of_thermal(dev))
priv->zone = devm_thermal_zone_of_sensor_register(
dev, i, priv,
&rcar_thermal_zone_of_ops);
@@ -508,6 +515,17 @@ static int rcar_thermal_probe(struct platform_device *pdev)
goto error_unregister;
}
+ if (rcar_use_of_thermal(dev)) {
+ /*
+ * thermal_zone doesn't enable hwmon as default,
+ * but, enable it here to keep compatible
+ */
+ priv->zone->tzp->no_hwmon = false;
+ ret = thermal_add_hwmon_sysfs(priv->zone);
+ if (ret)
+ goto error_unregister;
+ }
+
rcar_thermal_irq_enable(priv);
list_move_tail(&priv->list, &common->head);
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 5d491f16a866..e227a9f0acf7 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -96,6 +96,7 @@ struct chip_tsadc_table {
* @initialize: SoC special initialize tsadc controller method
* @irq_ack: clear the interrupt
* @get_temp: get the temperature
+ * @set_alarm_temp: set the high temperature interrupt
* @set_tshut_temp: set the hardware-controlled shutdown temperature
* @set_tshut_mode: set the hardware-controlled shutdown mode
* @table: the chip-specific conversion table
@@ -119,6 +120,8 @@ struct rockchip_tsadc_chip {
/* Per-sensor methods */
int (*get_temp)(struct chip_tsadc_table table,
int chn, void __iomem *reg, int *temp);
+ void (*set_alarm_temp)(struct chip_tsadc_table table,
+ int chn, void __iomem *reg, int temp);
void (*set_tshut_temp)(struct chip_tsadc_table table,
int chn, void __iomem *reg, int temp);
void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
@@ -183,6 +186,7 @@ struct rockchip_thermal_data {
#define TSADCV2_INT_EN 0x08
#define TSADCV2_INT_PD 0x0c
#define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04)
+#define TSADCV2_COMP_INT(chn) (0x30 + (chn) * 0x04)
#define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04)
#define TSADCV2_HIGHT_INT_DEBOUNCE 0x60
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64
@@ -207,18 +211,21 @@ struct rockchip_thermal_data {
#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4
-#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */
-#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */
+#define TSADCV2_AUTO_PERIOD_TIME 250 /* 250ms */
+#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* 50ms */
+#define TSADCV3_AUTO_PERIOD_TIME 1875 /* 2.5ms */
+#define TSADCV3_AUTO_PERIOD_HT_TIME 1875 /* 2.5ms */
+
#define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */
#define GRF_SARADC_TESTBIT 0x0e644
#define GRF_TSADC_TESTBIT_L 0x0e648
#define GRF_TSADC_TESTBIT_H 0x0e64c
-#define GRF_TSADC_TSEN_PD_ON (0x30003 << 0)
-#define GRF_TSADC_TSEN_PD_OFF (0x30000 << 0)
#define GRF_SARADC_TESTBIT_ON (0x10001 << 2)
#define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2)
+#define GRF_TSADC_VCM_EN_L (0x10001 << 7)
+#define GRF_TSADC_VCM_EN_H (0x10001 << 7)
/**
* struct tsadc_table - code to temperature conversion table
@@ -394,13 +401,17 @@ static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
int temp)
{
int high, low, mid;
+ u32 error = 0;
low = 0;
high = table.length - 1;
mid = (high + low) / 2;
- if (temp < table.id[low].temp || temp > table.id[high].temp)
- return 0;
+ /* Return mask code data when the temp is over table range */
+ if (temp < table.id[low].temp || temp > table.id[high].temp) {
+ error = table.data_mask;
+ goto exit;
+ }
while (low <= high) {
if (temp == table.id[mid].temp)
@@ -412,7 +423,9 @@ static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
mid = (low + high) / 2;
}
- return 0;
+exit:
+ pr_err("Invalid the conversion, error=%d\n", error);
+ return error;
}
static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
@@ -543,14 +556,34 @@ static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
/* Set interleave value to workround ic time sync issue */
writel_relaxed(TSADCV2_USER_INTER_PD_SOC, regs +
TSADCV2_USER_CON);
+
+ writel_relaxed(TSADCV2_AUTO_PERIOD_TIME,
+ regs + TSADCV2_AUTO_PERIOD);
+ writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+ writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
+ regs + TSADCV2_AUTO_PERIOD_HT);
+ writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+
} else {
- regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_ON);
- mdelay(10);
- regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_OFF);
+ /* Enable the voltage common mode feature */
+ regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_VCM_EN_L);
+ regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_VCM_EN_H);
+
usleep_range(15, 100); /* The spec note says at least 15 us */
regmap_write(grf, GRF_SARADC_TESTBIT, GRF_SARADC_TESTBIT_ON);
regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_TESTBIT_H_ON);
usleep_range(90, 200); /* The spec note says at least 90 us */
+
+ writel_relaxed(TSADCV3_AUTO_PERIOD_TIME,
+ regs + TSADCV2_AUTO_PERIOD);
+ writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+ writel_relaxed(TSADCV3_AUTO_PERIOD_HT_TIME,
+ regs + TSADCV2_AUTO_PERIOD_HT);
+ writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
}
if (tshut_polarity == TSHUT_HIGH_ACTIVE)
@@ -559,14 +592,6 @@ static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
else
writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
regs + TSADCV2_AUTO_CON);
-
- writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
- writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
- regs + TSADCV2_HIGHT_INT_DEBOUNCE);
- writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
- regs + TSADCV2_AUTO_PERIOD_HT);
- writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
- regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
}
static void rk_tsadcv2_irq_ack(void __iomem *regs)
@@ -628,12 +653,34 @@ static int rk_tsadcv2_get_temp(struct chip_tsadc_table table,
return rk_tsadcv2_code_to_temp(table, val, temp);
}
+static void rk_tsadcv2_alarm_temp(struct chip_tsadc_table table,
+ int chn, void __iomem *regs, int temp)
+{
+ u32 alarm_value, int_en;
+
+ /* Make sure the value is valid */
+ alarm_value = rk_tsadcv2_temp_to_code(table, temp);
+ if (alarm_value == table.data_mask)
+ return;
+
+ writel_relaxed(alarm_value & table.data_mask,
+ regs + TSADCV2_COMP_INT(chn));
+
+ int_en = readl_relaxed(regs + TSADCV2_INT_EN);
+ int_en |= TSADCV2_INT_SRC_EN(chn);
+ writel_relaxed(int_en, regs + TSADCV2_INT_EN);
+}
+
static void rk_tsadcv2_tshut_temp(struct chip_tsadc_table table,
int chn, void __iomem *regs, int temp)
{
u32 tshut_value, val;
+ /* Make sure the value is valid */
tshut_value = rk_tsadcv2_temp_to_code(table, temp);
+ if (tshut_value == table.data_mask)
+ return;
+
writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
/* TSHUT will be valid */
@@ -670,6 +717,7 @@ static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
.get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
@@ -694,6 +742,7 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
.irq_ack = rk_tsadcv2_irq_ack,
.control = rk_tsadcv2_control,
.get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
@@ -718,6 +767,7 @@ static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
.get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
@@ -742,6 +792,7 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
.irq_ack = rk_tsadcv2_irq_ack,
.control = rk_tsadcv2_control,
.get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
@@ -766,6 +817,7 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
.get_temp = rk_tsadcv2_get_temp,
+ .set_alarm_temp = rk_tsadcv2_alarm_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
@@ -821,11 +873,27 @@ static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
thermal->chip->irq_ack(thermal->regs);
for (i = 0; i < thermal->chip->chn_num; i++)
- thermal_zone_device_update(thermal->sensors[i].tzd);
+ thermal_zone_device_update(thermal->sensors[i].tzd,
+ THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
+static int rockchip_thermal_set_trips(void *_sensor, int low, int high)
+{
+ struct rockchip_thermal_sensor *sensor = _sensor;
+ struct rockchip_thermal_data *thermal = sensor->thermal;
+ const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+
+ dev_dbg(&thermal->pdev->dev, "%s: sensor %d: low: %d, high %d\n",
+ __func__, sensor->id, low, high);
+
+ tsadc->set_alarm_temp(tsadc->table,
+ sensor->id, thermal->regs, high);
+
+ return 0;
+}
+
static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
{
struct rockchip_thermal_sensor *sensor = _sensor;
@@ -843,6 +911,7 @@ static int rockchip_thermal_get_temp(void *_sensor, int *out_temp)
static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = {
.get_temp = rockchip_thermal_get_temp,
+ .set_trips = rockchip_thermal_set_trips,
};
static int rockchip_configure_from_dt(struct device *dev,
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index f3ce94ec73b5..ad1186dd6132 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -225,7 +225,7 @@ static void exynos_report_trigger(struct exynos_tmu_data *p)
return;
}
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
mutex_lock(&tz->lock);
/* Find the level for which trip happened */
diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c
index fc0c9e198710..91d42319de27 100644
--- a/drivers/thermal/st/st_thermal_memmap.c
+++ b/drivers/thermal/st/st_thermal_memmap.c
@@ -42,7 +42,8 @@ static irqreturn_t st_mmap_thermal_trip_handler(int irq, void *sdata)
{
struct st_thermal_sensor *sensor = sdata;
- thermal_zone_device_update(sensor->thermal_dev);
+ thermal_zone_device_update(sensor->thermal_dev,
+ THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
diff --git a/drivers/thermal/tango_thermal.c b/drivers/thermal/tango_thermal.c
index 70e0d9f406e9..201304aeafeb 100644
--- a/drivers/thermal/tango_thermal.c
+++ b/drivers/thermal/tango_thermal.c
@@ -64,6 +64,12 @@ static const struct thermal_zone_of_device_ops ops = {
.get_temp = tango_get_temp,
};
+static void tango_thermal_init(struct tango_thermal_priv *priv)
+{
+ writel(0, priv->base + TEMPSI_CFG);
+ writel(CMD_ON, priv->base + TEMPSI_CMD);
+}
+
static int tango_thermal_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -79,14 +85,22 @@ static int tango_thermal_probe(struct platform_device *pdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
+ platform_set_drvdata(pdev, priv);
priv->thresh_idx = IDX_MIN;
- writel(0, priv->base + TEMPSI_CFG);
- writel(CMD_ON, priv->base + TEMPSI_CMD);
+ tango_thermal_init(priv);
tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
return PTR_ERR_OR_ZERO(tzdev);
}
+static int __maybe_unused tango_thermal_resume(struct device *dev)
+{
+ tango_thermal_init(dev_get_drvdata(dev));
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(tango_thermal_pm, NULL, tango_thermal_resume);
+
static const struct of_device_id tango_sensor_ids[] = {
{
.compatible = "sigma,smp8758-thermal",
@@ -99,6 +113,7 @@ static struct platform_driver tango_thermal_driver = {
.driver = {
.name = "tango-thermal",
.of_match_table = tango_sensor_ids,
+ .pm = &tango_thermal_pm,
},
};
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index b8651726201e..7d2db23d71a3 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -30,6 +30,7 @@
#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include "../thermal_core.h"
#include "soctherm.h"
#define SENSOR_CONFIG0 0
@@ -67,35 +68,228 @@
#define READBACK_ADD_HALF BIT(7)
#define READBACK_NEGATE BIT(0)
+/*
+ * THERMCTL_LEVEL0_GROUP_CPU is defined in soctherm.h
+ * because it will be used by tegraxxx_soctherm.c
+ */
+#define THERMCTL_LVL0_CPU0_EN_MASK BIT(8)
+#define THERMCTL_LVL0_CPU0_CPU_THROT_MASK (0x3 << 5)
+#define THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT 0x1
+#define THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY 0x2
+#define THERMCTL_LVL0_CPU0_GPU_THROT_MASK (0x3 << 3)
+#define THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT 0x1
+#define THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY 0x2
+#define THERMCTL_LVL0_CPU0_MEM_THROT_MASK BIT(2)
+#define THERMCTL_LVL0_CPU0_STATUS_MASK 0x3
+
+#define THERMCTL_LVL0_UP_STATS 0x10
+#define THERMCTL_LVL0_DN_STATS 0x14
+
+#define THERMCTL_STATS_CTL 0x94
+#define STATS_CTL_CLR_DN 0x8
+#define STATS_CTL_EN_DN 0x4
+#define STATS_CTL_CLR_UP 0x2
+#define STATS_CTL_EN_UP 0x1
+
+#define THROT_GLOBAL_CFG 0x400
+#define THROT_GLOBAL_ENB_MASK BIT(0)
+
+#define CPU_PSKIP_STATUS 0x418
+#define XPU_PSKIP_STATUS_M_MASK (0xff << 12)
+#define XPU_PSKIP_STATUS_N_MASK (0xff << 4)
+#define XPU_PSKIP_STATUS_SW_OVERRIDE_MASK BIT(1)
+#define XPU_PSKIP_STATUS_ENABLED_MASK BIT(0)
+
+#define THROT_PRIORITY_LOCK 0x424
+#define THROT_PRIORITY_LOCK_PRIORITY_MASK 0xff
+
+#define THROT_STATUS 0x428
+#define THROT_STATUS_BREACH_MASK BIT(12)
+#define THROT_STATUS_STATE_MASK (0xff << 4)
+#define THROT_STATUS_ENABLED_MASK BIT(0)
+
+#define THROT_PSKIP_CTRL_LITE_CPU 0x430
+#define THROT_PSKIP_CTRL_ENABLE_MASK BIT(31)
+#define THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8)
+#define THROT_PSKIP_CTRL_DIVISOR_MASK 0xff
+#define THROT_PSKIP_CTRL_VECT_GPU_MASK (0x7 << 16)
+#define THROT_PSKIP_CTRL_VECT_CPU_MASK (0x7 << 8)
+#define THROT_PSKIP_CTRL_VECT2_CPU_MASK 0x7
+
+#define THROT_VECT_NONE 0x0 /* 3'b000 */
+#define THROT_VECT_LOW 0x1 /* 3'b001 */
+#define THROT_VECT_MED 0x3 /* 3'b011 */
+#define THROT_VECT_HIGH 0x7 /* 3'b111 */
+
+#define THROT_PSKIP_RAMP_LITE_CPU 0x434
+#define THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31)
+#define THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8)
+#define THROT_PSKIP_RAMP_STEP_MASK 0xff
+
+#define THROT_PRIORITY_LITE 0x444
+#define THROT_PRIORITY_LITE_PRIO_MASK 0xff
+
+#define THROT_DELAY_LITE 0x448
+#define THROT_DELAY_LITE_DELAY_MASK 0xff
+
+/* car register offsets needed for enabling HW throttling */
+#define CAR_SUPER_CCLKG_DIVIDER 0x36c
+#define CDIVG_USE_THERM_CONTROLS_MASK BIT(30)
+
+/* ccroc register offsets needed for enabling HW throttling for Tegra132 */
+#define CCROC_SUPER_CCLKG_DIVIDER 0x024
+
+#define CCROC_GLOBAL_CFG 0x148
+
+#define CCROC_THROT_PSKIP_RAMP_CPU 0x150
+#define CCROC_THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK BIT(31)
+#define CCROC_THROT_PSKIP_RAMP_DURATION_MASK (0xffff << 8)
+#define CCROC_THROT_PSKIP_RAMP_STEP_MASK 0xff
+
+#define CCROC_THROT_PSKIP_CTRL_CPU 0x154
+#define CCROC_THROT_PSKIP_CTRL_ENB_MASK BIT(31)
+#define CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK (0xff << 8)
+#define CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK 0xff
+
/* get val from register(r) mask bits(m) */
#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
/* set val(v) to mask bits(m) of register(r) */
#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
(((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
+/* get dividend from the depth */
+#define THROT_DEPTH_DIVIDEND(depth) ((256 * (100 - (depth)) / 100) - 1)
+
+/* get THROT_PSKIP_xxx offset per LIGHT/HEAVY throt and CPU/GPU dev */
+#define THROT_OFFSET 0x30
+#define THROT_PSKIP_CTRL(throt, dev) (THROT_PSKIP_CTRL_LITE_CPU + \
+ (THROT_OFFSET * throt) + (8 * dev))
+#define THROT_PSKIP_RAMP(throt, dev) (THROT_PSKIP_RAMP_LITE_CPU + \
+ (THROT_OFFSET * throt) + (8 * dev))
+
+/* get THROT_xxx_CTRL offset per LIGHT/HEAVY throt */
+#define THROT_PRIORITY_CTRL(throt) (THROT_PRIORITY_LITE + \
+ (THROT_OFFSET * throt))
+#define THROT_DELAY_CTRL(throt) (THROT_DELAY_LITE + \
+ (THROT_OFFSET * throt))
+
+/* get CCROC_THROT_PSKIP_xxx offset per HIGH/MED/LOW vect*/
+#define CCROC_THROT_OFFSET 0x0c
+#define CCROC_THROT_PSKIP_CTRL_CPU_REG(vect) (CCROC_THROT_PSKIP_CTRL_CPU + \
+ (CCROC_THROT_OFFSET * vect))
+#define CCROC_THROT_PSKIP_RAMP_CPU_REG(vect) (CCROC_THROT_PSKIP_RAMP_CPU + \
+ (CCROC_THROT_OFFSET * vect))
+
+/* get THERMCTL_LEVELx offset per CPU/GPU/MEM/TSENSE rg and LEVEL0~3 lv */
+#define THERMCTL_LVL_REGS_SIZE 0x20
+#define THERMCTL_LVL_REG(rg, lv) ((rg) + ((lv) * THERMCTL_LVL_REGS_SIZE))
+
static const int min_low_temp = -127000;
static const int max_high_temp = 127000;
+enum soctherm_throttle_id {
+ THROTTLE_LIGHT = 0,
+ THROTTLE_HEAVY,
+ THROTTLE_SIZE,
+};
+
+enum soctherm_throttle_dev_id {
+ THROTTLE_DEV_CPU = 0,
+ THROTTLE_DEV_GPU,
+ THROTTLE_DEV_SIZE,
+};
+
+static const char *const throt_names[] = {
+ [THROTTLE_LIGHT] = "light",
+ [THROTTLE_HEAVY] = "heavy",
+};
+
+struct tegra_soctherm;
struct tegra_thermctl_zone {
void __iomem *reg;
struct device *dev;
+ struct tegra_soctherm *ts;
struct thermal_zone_device *tz;
const struct tegra_tsensor_group *sg;
};
+struct soctherm_throt_cfg {
+ const char *name;
+ unsigned int id;
+ u8 priority;
+ u8 cpu_throt_level;
+ u32 cpu_throt_depth;
+ struct thermal_cooling_device *cdev;
+ bool init;
+};
+
struct tegra_soctherm {
struct reset_control *reset;
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
- struct thermal_zone_device **thermctl_tzs;
+ void __iomem *clk_regs;
+ void __iomem *ccroc_regs;
u32 *calib;
+ struct thermal_zone_device **thermctl_tzs;
struct tegra_soctherm_soc *soc;
+ struct soctherm_throt_cfg throt_cfgs[THROTTLE_SIZE];
+
struct dentry *debugfs_dir;
};
+/**
+ * clk_writel() - writes a value to a CAR register
+ * @ts: pointer to a struct tegra_soctherm
+ * @v: the value to write
+ * @reg: the register offset
+ *
+ * Writes @v to @reg. No return value.
+ */
+static inline void clk_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
+{
+ writel(value, (ts->clk_regs + reg));
+}
+
+/**
+ * clk_readl() - reads specified register from CAR IP block
+ * @ts: pointer to a struct tegra_soctherm
+ * @reg: register address to be read
+ *
+ * Return: the value of the register
+ */
+static inline u32 clk_readl(struct tegra_soctherm *ts, u32 reg)
+{
+ return readl(ts->clk_regs + reg);
+}
+
+/**
+ * ccroc_writel() - writes a value to a CCROC register
+ * @ts: pointer to a struct tegra_soctherm
+ * @v: the value to write
+ * @reg: the register offset
+ *
+ * Writes @v to @reg. No return value.
+ */
+static inline void ccroc_writel(struct tegra_soctherm *ts, u32 value, u32 reg)
+{
+ writel(value, (ts->ccroc_regs + reg));
+}
+
+/**
+ * ccroc_readl() - reads specified register from CCROC IP block
+ * @ts: pointer to a struct tegra_soctherm
+ * @reg: register address to be read
+ *
+ * Return: the value of the register
+ */
+static inline u32 ccroc_readl(struct tegra_soctherm *ts, u32 reg)
+{
+ return readl(ts->ccroc_regs + reg);
+}
+
static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
{
const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
@@ -150,11 +344,17 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
static int
thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
int trip_temp);
+static int
+throttrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
+ struct soctherm_throt_cfg *stc, int trip_temp);
+static struct soctherm_throt_cfg *
+find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name);
static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
{
struct tegra_thermctl_zone *zone = data;
struct thermal_zone_device *tz = zone->tz;
+ struct tegra_soctherm *ts = zone->ts;
const struct tegra_tsensor_group *sg = zone->sg;
struct device *dev = zone->dev;
enum thermal_trip_type type;
@@ -167,10 +367,29 @@ static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
if (ret)
return ret;
- if (type != THERMAL_TRIP_CRITICAL)
- return 0;
+ if (type == THERMAL_TRIP_CRITICAL) {
+ return thermtrip_program(dev, sg, temp);
+ } else if (type == THERMAL_TRIP_HOT) {
+ int i;
+
+ for (i = 0; i < THROTTLE_SIZE; i++) {
+ struct thermal_cooling_device *cdev;
+ struct soctherm_throt_cfg *stc;
+
+ if (!ts->throt_cfgs[i].init)
+ continue;
+
+ cdev = ts->throt_cfgs[i].cdev;
+ if (get_thermal_instance(tz, cdev, trip))
+ stc = find_throttle_cfg_by_name(ts, cdev->type);
+ else
+ continue;
+
+ return throttrip_program(dev, sg, stc, temp);
+ }
+ }
- return thermtrip_program(dev, sg, temp);
+ return 0;
}
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
@@ -238,14 +457,110 @@ static int thermtrip_program(struct device *dev,
}
/**
+ * throttrip_program() - Configures the hardware to throttle the
+ * pulse if a given sensor group reaches a given temperature
+ * @dev: ptr to the struct device for the SOC_THERM IP block
+ * @sg: pointer to the sensor group to set the thermtrip temperature for
+ * @stc: pointer to the throttle need to be triggered
+ * @trip_temp: the temperature in millicelsius to trigger the thermal trip at
+ *
+ * Sets the thermal trip threshold and throttle event of the given sensor
+ * group. If this threshold is crossed, the hardware will trigger the
+ * throttle.
+ *
+ * Note that, although @trip_temp is specified in millicelsius, the
+ * hardware is programmed in degrees Celsius.
+ *
+ * Return: 0 upon success, or %-EINVAL upon failure.
+ */
+static int throttrip_program(struct device *dev,
+ const struct tegra_tsensor_group *sg,
+ struct soctherm_throt_cfg *stc,
+ int trip_temp)
+{
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ int temp, cpu_throt, gpu_throt;
+ unsigned int throt;
+ u32 r, reg_off;
+
+ if (!dev || !sg || !stc || !stc->init)
+ return -EINVAL;
+
+ temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
+
+ /* Hardcode LIGHT on LEVEL1 and HEAVY on LEVEL2 */
+ throt = stc->id;
+ reg_off = THERMCTL_LVL_REG(sg->thermctl_lvl0_offset, throt + 1);
+
+ if (throt == THROTTLE_LIGHT) {
+ cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT;
+ gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT;
+ } else {
+ cpu_throt = THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY;
+ gpu_throt = THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY;
+ if (throt != THROTTLE_HEAVY)
+ dev_warn(dev,
+ "invalid throt id %d - assuming HEAVY",
+ throt);
+ }
+
+ r = readl(ts->regs + reg_off);
+ r = REG_SET_MASK(r, sg->thermctl_lvl0_up_thresh_mask, temp);
+ r = REG_SET_MASK(r, sg->thermctl_lvl0_dn_thresh_mask, temp);
+ r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_CPU_THROT_MASK, cpu_throt);
+ r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_GPU_THROT_MASK, gpu_throt);
+ r = REG_SET_MASK(r, THERMCTL_LVL0_CPU0_EN_MASK, 1);
+ writel(r, ts->regs + reg_off);
+
+ return 0;
+}
+
+static struct soctherm_throt_cfg *
+find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name)
+{
+ unsigned int i;
+
+ for (i = 0; ts->throt_cfgs[i].name; i++)
+ if (!strcmp(ts->throt_cfgs[i].name, name))
+ return &ts->throt_cfgs[i];
+
+ return NULL;
+}
+
+static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
+{
+ int ntrips, i, ret;
+ enum thermal_trip_type type;
+
+ ntrips = of_thermal_get_ntrips(tz);
+ if (ntrips <= 0)
+ return -EINVAL;
+
+ for (i = 0; i < ntrips; i++) {
+ ret = tz->ops->get_trip_type(tz, i, &type);
+ if (ret)
+ return -EINVAL;
+ if (type == THERMAL_TRIP_HOT) {
+ ret = tz->ops->get_trip_temp(tz, i, temp);
+ if (!ret)
+ *trip = i;
+
+ return ret;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/**
* tegra_soctherm_set_hwtrips() - set HW trip point from DT data
* @dev: struct device * of the SOC_THERM instance
*
* Configure the SOC_THERM HW trip points, setting "THERMTRIP"
- * trip points , using "critical" type trip_temp from thermal
- * zone.
- * After they have been configured, THERMTRIP will take action
- * when the configured SoC thermal sensor group reaches a
+ * "THROTTLE" trip points , using "critical" or "hot" type trip_temp
+ * from thermal zone.
+ * After they have been configured, THERMTRIP or THROTTLE will take
+ * action when the configured SoC thermal sensor group reaches a
* certain temperature.
*
* Return: 0 upon success, or a negative error code on failure.
@@ -254,19 +569,24 @@ static int thermtrip_program(struct device *dev,
* THERMTRIP has been enabled successfully when a message similar to
* this one appears on the serial console:
* "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
+ * THROTTLE has been enabled successfully when a message similar to
+ * this one appears on the serial console:
+ * ""throttrip: will throttle when sensor group XXX reaches YYYYYY mC"
*/
static int tegra_soctherm_set_hwtrips(struct device *dev,
const struct tegra_tsensor_group *sg,
struct thermal_zone_device *tz)
{
- int temperature;
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ struct soctherm_throt_cfg *stc;
+ int i, trip, temperature;
int ret;
ret = tz->ops->get_crit_temp(tz, &temperature);
if (ret) {
dev_warn(dev, "thermtrip: %s: missing critical temperature\n",
sg->name);
- return ret;
+ goto set_throttle;
}
ret = thermtrip_program(dev, sg, temperature);
@@ -280,6 +600,43 @@ static int tegra_soctherm_set_hwtrips(struct device *dev,
"thermtrip: will shut down when %s reaches %d mC\n",
sg->name, temperature);
+set_throttle:
+ ret = get_hot_temp(tz, &trip, &temperature);
+ if (ret) {
+ dev_warn(dev, "throttrip: %s: missing hot temperature\n",
+ sg->name);
+ return 0;
+ }
+
+ for (i = 0; i < THROTTLE_SIZE; i++) {
+ struct thermal_cooling_device *cdev;
+
+ if (!ts->throt_cfgs[i].init)
+ continue;
+
+ cdev = ts->throt_cfgs[i].cdev;
+ if (get_thermal_instance(tz, cdev, trip))
+ stc = find_throttle_cfg_by_name(ts, cdev->type);
+ else
+ continue;
+
+ ret = throttrip_program(dev, sg, stc, temperature);
+ if (ret) {
+ dev_err(dev, "throttrip: %s: error during enable\n",
+ sg->name);
+ return ret;
+ }
+
+ dev_info(dev,
+ "throttrip: will throttle when %s reaches %d mC\n",
+ sg->name, temperature);
+ break;
+ }
+
+ if (i == THROTTLE_SIZE)
+ dev_warn(dev, "throttrip: %s: missing throttle cdev\n",
+ sg->name);
+
return 0;
}
@@ -291,7 +648,7 @@ static int regs_show(struct seq_file *s, void *data)
const struct tegra_tsensor *tsensors = ts->soc->tsensors;
const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
u32 r, state;
- int i;
+ int i, level;
seq_puts(s, "-----TSENSE (convert HW)-----\n");
@@ -365,6 +722,81 @@ static int regs_show(struct seq_file *s, void *data)
state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
seq_printf(s, " MEM(%d)\n", translate_temp(state));
+ for (i = 0; i < ts->soc->num_ttgs; i++) {
+ seq_printf(s, "%s:\n", ttgs[i]->name);
+ for (level = 0; level < 4; level++) {
+ s32 v;
+ u32 mask;
+ u16 off = ttgs[i]->thermctl_lvl0_offset;
+
+ r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+
+ mask = ttgs[i]->thermctl_lvl0_up_thresh_mask;
+ state = REG_GET_MASK(r, mask);
+ v = sign_extend32(state, ts->soc->bptt - 1);
+ v *= ts->soc->thresh_grain;
+ seq_printf(s, " %d: Up/Dn(%d /", level, v);
+
+ mask = ttgs[i]->thermctl_lvl0_dn_thresh_mask;
+ state = REG_GET_MASK(r, mask);
+ v = sign_extend32(state, ts->soc->bptt - 1);
+ v *= ts->soc->thresh_grain;
+ seq_printf(s, "%d ) ", v);
+
+ mask = THERMCTL_LVL0_CPU0_EN_MASK;
+ state = REG_GET_MASK(r, mask);
+ seq_printf(s, "En(%d) ", state);
+
+ mask = THERMCTL_LVL0_CPU0_CPU_THROT_MASK;
+ state = REG_GET_MASK(r, mask);
+ seq_puts(s, "CPU Throt");
+ if (!state)
+ seq_printf(s, "(%s) ", "none");
+ else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_LIGHT)
+ seq_printf(s, "(%s) ", "L");
+ else if (state == THERMCTL_LVL0_CPU0_CPU_THROT_HEAVY)
+ seq_printf(s, "(%s) ", "H");
+ else
+ seq_printf(s, "(%s) ", "H+L");
+
+ mask = THERMCTL_LVL0_CPU0_GPU_THROT_MASK;
+ state = REG_GET_MASK(r, mask);
+ seq_puts(s, "GPU Throt");
+ if (!state)
+ seq_printf(s, "(%s) ", "none");
+ else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_LIGHT)
+ seq_printf(s, "(%s) ", "L");
+ else if (state == THERMCTL_LVL0_CPU0_GPU_THROT_HEAVY)
+ seq_printf(s, "(%s) ", "H");
+ else
+ seq_printf(s, "(%s) ", "H+L");
+
+ mask = THERMCTL_LVL0_CPU0_STATUS_MASK;
+ state = REG_GET_MASK(r, mask);
+ seq_printf(s, "Status(%s)\n",
+ state == 0 ? "LO" :
+ state == 1 ? "In" :
+ state == 2 ? "Res" : "HI");
+ }
+ }
+
+ r = readl(ts->regs + THERMCTL_STATS_CTL);
+ seq_printf(s, "STATS: Up(%s) Dn(%s)\n",
+ r & STATS_CTL_EN_UP ? "En" : "--",
+ r & STATS_CTL_EN_DN ? "En" : "--");
+
+ for (level = 0; level < 4; level++) {
+ u16 off;
+
+ off = THERMCTL_LVL0_UP_STATS;
+ r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+ seq_printf(s, " Level_%d Up(%d) ", level, r);
+
+ off = THERMCTL_LVL0_DN_STATS;
+ r = readl(ts->regs + THERMCTL_LVL_REG(off, level));
+ seq_printf(s, "Dn(%d)\n", r);
+ }
+
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
seq_printf(s, "Thermtrip Any En(%d)\n", state);
@@ -376,6 +808,32 @@ static int regs_show(struct seq_file *s, void *data)
seq_printf(s, "Thresh(%d)\n", state);
}
+ r = readl(ts->regs + THROT_GLOBAL_CFG);
+ seq_puts(s, "\n");
+ seq_printf(s, "GLOBAL THROTTLE CONFIG: 0x%08x\n", r);
+
+ seq_puts(s, "---------------------------------------------------\n");
+ r = readl(ts->regs + THROT_STATUS);
+ state = REG_GET_MASK(r, THROT_STATUS_BREACH_MASK);
+ seq_printf(s, "THROT STATUS: breach(%d) ", state);
+ state = REG_GET_MASK(r, THROT_STATUS_STATE_MASK);
+ seq_printf(s, "state(%d) ", state);
+ state = REG_GET_MASK(r, THROT_STATUS_ENABLED_MASK);
+ seq_printf(s, "enabled(%d)\n", state);
+
+ r = readl(ts->regs + CPU_PSKIP_STATUS);
+ if (ts->soc->use_ccroc) {
+ state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
+ seq_printf(s, "CPU PSKIP STATUS: enabled(%d)\n", state);
+ } else {
+ state = REG_GET_MASK(r, XPU_PSKIP_STATUS_M_MASK);
+ seq_printf(s, "CPU PSKIP STATUS: M(%d) ", state);
+ state = REG_GET_MASK(r, XPU_PSKIP_STATUS_N_MASK);
+ seq_printf(s, "N(%d) ", state);
+ state = REG_GET_MASK(r, XPU_PSKIP_STATUS_ENABLED_MASK);
+ seq_printf(s, "enabled(%d)\n", state);
+ }
+
return 0;
}
@@ -449,6 +907,326 @@ static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
return 0;
}
+static int throt_get_cdev_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *max_state)
+{
+ *max_state = 1;
+ return 0;
+}
+
+static int throt_get_cdev_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *cur_state)
+{
+ struct tegra_soctherm *ts = cdev->devdata;
+ u32 r;
+
+ r = readl(ts->regs + THROT_STATUS);
+ if (REG_GET_MASK(r, THROT_STATUS_STATE_MASK))
+ *cur_state = 1;
+ else
+ *cur_state = 0;
+
+ return 0;
+}
+
+static int throt_set_cdev_state(struct thermal_cooling_device *cdev,
+ unsigned long cur_state)
+{
+ return 0;
+}
+
+static struct thermal_cooling_device_ops throt_cooling_ops = {
+ .get_max_state = throt_get_cdev_max_state,
+ .get_cur_state = throt_get_cdev_cur_state,
+ .set_cur_state = throt_set_cdev_state,
+};
+
+/**
+ * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations
+ * and register them as cooling devices.
+ */
+static void soctherm_init_hw_throt_cdev(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ struct device_node *np_stc, *np_stcc;
+ const char *name;
+ u32 val;
+ int i, r;
+
+ for (i = 0; i < THROTTLE_SIZE; i++) {
+ ts->throt_cfgs[i].name = throt_names[i];
+ ts->throt_cfgs[i].id = i;
+ ts->throt_cfgs[i].init = false;
+ }
+
+ np_stc = of_get_child_by_name(dev->of_node, "throttle-cfgs");
+ if (!np_stc) {
+ dev_info(dev,
+ "throttle-cfg: no throttle-cfgs - not enabling\n");
+ return;
+ }
+
+ for_each_child_of_node(np_stc, np_stcc) {
+ struct soctherm_throt_cfg *stc;
+ struct thermal_cooling_device *tcd;
+
+ name = np_stcc->name;
+ stc = find_throttle_cfg_by_name(ts, name);
+ if (!stc) {
+ dev_err(dev,
+ "throttle-cfg: could not find %s\n", name);
+ continue;
+ }
+
+ r = of_property_read_u32(np_stcc, "nvidia,priority", &val);
+ if (r) {
+ dev_info(dev,
+ "throttle-cfg: %s: missing priority\n", name);
+ continue;
+ }
+ stc->priority = val;
+
+ if (ts->soc->use_ccroc) {
+ r = of_property_read_u32(np_stcc,
+ "nvidia,cpu-throt-level",
+ &val);
+ if (r) {
+ dev_info(dev,
+ "throttle-cfg: %s: missing cpu-throt-level\n",
+ name);
+ continue;
+ }
+ stc->cpu_throt_level = val;
+ } else {
+ r = of_property_read_u32(np_stcc,
+ "nvidia,cpu-throt-percent",
+ &val);
+ if (r) {
+ dev_info(dev,
+ "throttle-cfg: %s: missing cpu-throt-percent\n",
+ name);
+ continue;
+ }
+ stc->cpu_throt_depth = val;
+ }
+
+ tcd = thermal_of_cooling_device_register(np_stcc,
+ (char *)name, ts,
+ &throt_cooling_ops);
+ of_node_put(np_stcc);
+ if (IS_ERR_OR_NULL(tcd)) {
+ dev_err(dev,
+ "throttle-cfg: %s: failed to register cooling device\n",
+ name);
+ continue;
+ }
+
+ stc->cdev = tcd;
+ stc->init = true;
+ }
+
+ of_node_put(np_stc);
+}
+
+/**
+ * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config
+ * @level: describing the level LOW/MED/HIGH of throttling
+ *
+ * It's necessary to set up the CPU-local CCROC NV_THERM instance with
+ * the M/N values desired for each level. This function does this.
+ *
+ * This function pre-programs the CCROC NV_THERM levels in terms of
+ * pre-configured "Low", "Medium" or "Heavy" throttle levels which are
+ * mapped to THROT_LEVEL_LOW, THROT_LEVEL_MED and THROT_LEVEL_HVY.
+ */
+static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level)
+{
+ u8 depth, dividend;
+ u32 r;
+
+ switch (level) {
+ case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
+ depth = 50;
+ break;
+ case TEGRA_SOCTHERM_THROT_LEVEL_MED:
+ depth = 75;
+ break;
+ case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
+ depth = 80;
+ break;
+ case TEGRA_SOCTHERM_THROT_LEVEL_NONE:
+ return;
+ default:
+ return;
+ }
+
+ dividend = THROT_DEPTH_DIVIDEND(depth);
+
+ /* setup PSKIP in ccroc nv_therm registers */
+ r = ccroc_readl(ts, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
+ r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
+ r = REG_SET_MASK(r, CCROC_THROT_PSKIP_RAMP_STEP_MASK, 0xf);
+ ccroc_writel(ts, r, CCROC_THROT_PSKIP_RAMP_CPU_REG(level));
+
+ r = ccroc_readl(ts, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
+ r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_ENB_MASK, 1);
+ r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
+ r = REG_SET_MASK(r, CCROC_THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
+ ccroc_writel(ts, r, CCROC_THROT_PSKIP_CTRL_CPU_REG(level));
+}
+
+/**
+ * throttlectl_cpu_level_select() - program CPU pulse skipper config
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * Pulse skippers are used to throttle clock frequencies. This
+ * function programs the pulse skippers based on @throt and platform
+ * data. This function is used on SoCs which have CPU-local pulse
+ * skipper control, such as T13x. It programs soctherm's interface to
+ * Denver:CCROC NV_THERM in terms of Low, Medium and HIGH throttling
+ * vectors. PSKIP_BYPASS mode is set as required per HW spec.
+ */
+static void throttlectl_cpu_level_select(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id throt)
+{
+ u32 r, throt_vect;
+
+ /* Denver:CCROC NV_THERM interface N:3 Mapping */
+ switch (ts->throt_cfgs[throt].cpu_throt_level) {
+ case TEGRA_SOCTHERM_THROT_LEVEL_LOW:
+ throt_vect = THROT_VECT_LOW;
+ break;
+ case TEGRA_SOCTHERM_THROT_LEVEL_MED:
+ throt_vect = THROT_VECT_MED;
+ break;
+ case TEGRA_SOCTHERM_THROT_LEVEL_HIGH:
+ throt_vect = THROT_VECT_HIGH;
+ break;
+ default:
+ throt_vect = THROT_VECT_NONE;
+ break;
+ }
+
+ r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT_CPU_MASK, throt_vect);
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_VECT2_CPU_MASK, throt_vect);
+ writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+
+ /* bypass sequencer in soc_therm as it is programmed in ccroc */
+ r = REG_SET_MASK(0, THROT_PSKIP_RAMP_SEQ_BYPASS_MODE_MASK, 1);
+ writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+}
+
+/**
+ * throttlectl_cpu_mn() - program CPU pulse skipper configuration
+ * @throt: the LIGHT/HEAVY of throttle event id
+ *
+ * Pulse skippers are used to throttle clock frequencies. This
+ * function programs the pulse skippers based on @throt and platform
+ * data. This function is used for CPUs that have "remote" pulse
+ * skipper control, e.g., the CPU pulse skipper is controlled by the
+ * SOC_THERM IP block. (SOC_THERM is located outside the CPU
+ * complex.)
+ */
+static void throttlectl_cpu_mn(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id throt)
+{
+ u32 r;
+ int depth;
+ u8 dividend;
+
+ depth = ts->throt_cfgs[throt].cpu_throt_depth;
+ dividend = THROT_DEPTH_DIVIDEND(depth);
+
+ r = readl(ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_ENABLE_MASK, 1);
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVIDEND_MASK, dividend);
+ r = REG_SET_MASK(r, THROT_PSKIP_CTRL_DIVISOR_MASK, 0xff);
+ writel(r, ts->regs + THROT_PSKIP_CTRL(throt, THROTTLE_DEV_CPU));
+
+ r = readl(ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+ r = REG_SET_MASK(r, THROT_PSKIP_RAMP_DURATION_MASK, 0xff);
+ r = REG_SET_MASK(r, THROT_PSKIP_RAMP_STEP_MASK, 0xf);
+ writel(r, ts->regs + THROT_PSKIP_RAMP(throt, THROTTLE_DEV_CPU));
+}
+
+/**
+ * soctherm_throttle_program() - programs pulse skippers' configuration
+ * @throt: the LIGHT/HEAVY of the throttle event id.
+ *
+ * Pulse skippers are used to throttle clock frequencies.
+ * This function programs the pulse skippers.
+ */
+static void soctherm_throttle_program(struct tegra_soctherm *ts,
+ enum soctherm_throttle_id throt)
+{
+ u32 r;
+ struct soctherm_throt_cfg stc = ts->throt_cfgs[throt];
+
+ if (!stc.init)
+ return;
+
+ /* Setup PSKIP parameters */
+ if (ts->soc->use_ccroc)
+ throttlectl_cpu_level_select(ts, throt);
+ else
+ throttlectl_cpu_mn(ts, throt);
+
+ r = REG_SET_MASK(0, THROT_PRIORITY_LITE_PRIO_MASK, stc.priority);
+ writel(r, ts->regs + THROT_PRIORITY_CTRL(throt));
+
+ r = REG_SET_MASK(0, THROT_DELAY_LITE_DELAY_MASK, 0);
+ writel(r, ts->regs + THROT_DELAY_CTRL(throt));
+
+ r = readl(ts->regs + THROT_PRIORITY_LOCK);
+ r = REG_GET_MASK(r, THROT_PRIORITY_LOCK_PRIORITY_MASK);
+ if (r >= stc.priority)
+ return;
+ r = REG_SET_MASK(0, THROT_PRIORITY_LOCK_PRIORITY_MASK,
+ stc.priority);
+ writel(r, ts->regs + THROT_PRIORITY_LOCK);
+}
+
+static void tegra_soctherm_throttle(struct device *dev)
+{
+ struct tegra_soctherm *ts = dev_get_drvdata(dev);
+ u32 v;
+ int i;
+
+ /* configure LOW, MED and HIGH levels for CCROC NV_THERM */
+ if (ts->soc->use_ccroc) {
+ throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_LOW);
+ throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_MED);
+ throttlectl_cpu_level_cfg(ts, TEGRA_SOCTHERM_THROT_LEVEL_HIGH);
+ }
+
+ /* Thermal HW throttle programming */
+ for (i = 0; i < THROTTLE_SIZE; i++)
+ soctherm_throttle_program(ts, i);
+
+ v = REG_SET_MASK(0, THROT_GLOBAL_ENB_MASK, 1);
+ if (ts->soc->use_ccroc) {
+ ccroc_writel(ts, v, CCROC_GLOBAL_CFG);
+
+ v = ccroc_readl(ts, CCROC_SUPER_CCLKG_DIVIDER);
+ v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
+ ccroc_writel(ts, v, CCROC_SUPER_CCLKG_DIVIDER);
+ } else {
+ writel(v, ts->regs + THROT_GLOBAL_CFG);
+
+ v = clk_readl(ts, CAR_SUPER_CCLKG_DIVIDER);
+ v = REG_SET_MASK(v, CDIVG_USE_THERM_CONTROLS_MASK, 1);
+ clk_writel(ts, v, CAR_SUPER_CCLKG_DIVIDER);
+ }
+
+ /* initialize stats collection */
+ v = STATS_CTL_CLR_DN | STATS_CTL_EN_DN |
+ STATS_CTL_CLR_UP | STATS_CTL_EN_UP;
+ writel(v, ts->regs + THERMCTL_STATS_CTL);
+}
+
static void soctherm_init(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
@@ -475,6 +1253,9 @@ static void soctherm_init(struct platform_device *pdev)
}
writel(pdiv, tegra->regs + SENSOR_PDIV);
writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+ /* Configure hw throttle */
+ tegra_soctherm_throttle(&pdev->dev);
}
static const struct of_device_id tegra_soctherm_of_match[] = {
@@ -527,10 +1308,31 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
tegra->soc = soc;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "soctherm-reg");
tegra->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(tegra->regs))
+ if (IS_ERR(tegra->regs)) {
+ dev_err(&pdev->dev, "can't get soctherm registers");
return PTR_ERR(tegra->regs);
+ }
+
+ if (!tegra->soc->use_ccroc) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "car-reg");
+ tegra->clk_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->clk_regs)) {
+ dev_err(&pdev->dev, "can't get car clk registers");
+ return PTR_ERR(tegra->clk_regs);
+ }
+ } else {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "ccroc-reg");
+ tegra->ccroc_regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->ccroc_regs)) {
+ dev_err(&pdev->dev, "can't get ccroc registers");
+ return PTR_ERR(tegra->ccroc_regs);
+ }
+ }
tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
if (IS_ERR(tegra->reset)) {
@@ -580,6 +1382,8 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
if (err)
return err;
+ soctherm_init_hw_throt_cdev(pdev);
+
soctherm_init(pdev);
for (i = 0; i < soc->num_ttgs; ++i) {
@@ -593,6 +1397,7 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
zone->dev = &pdev->dev;
zone->sg = soc->ttgs[i];
+ zone->ts = tegra;
z = devm_thermal_zone_of_sensor_register(&pdev->dev,
soc->ttgs[i]->id, zone,
@@ -608,7 +1413,9 @@ static int tegra_soctherm_probe(struct platform_device *pdev)
tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
/* Configure hw trip points */
- tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
+ err = tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
+ if (err)
+ goto disable_clocks;
}
soctherm_debug_init(pdev);
@@ -661,7 +1468,12 @@ static int __maybe_unused soctherm_resume(struct device *dev)
struct thermal_zone_device *tz;
tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
- tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
+ err = tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Resume failed: set hwtrips failed\n");
+ return err;
+ }
}
return 0;
diff --git a/drivers/thermal/tegra/soctherm.h b/drivers/thermal/tegra/soctherm.h
index 28e18ec4b4c3..e96ca73fd780 100644
--- a/drivers/thermal/tegra/soctherm.h
+++ b/drivers/thermal/tegra/soctherm.h
@@ -15,6 +15,11 @@
#ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
#define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
+#define THERMCTL_LEVEL0_GROUP_CPU 0x0
+#define THERMCTL_LEVEL0_GROUP_GPU 0x4
+#define THERMCTL_LEVEL0_GROUP_MEM 0x8
+#define THERMCTL_LEVEL0_GROUP_TSENSE 0xc
+
#define SENSOR_CONFIG2 8
#define SENSOR_CONFIG2_THERMA_MASK (0xffff << 16)
#define SENSOR_CONFIG2_THERMA_SHIFT 16
@@ -65,6 +70,9 @@ struct tegra_tsensor_group {
u32 thermtrip_enable_mask;
u32 thermtrip_any_en_mask;
u32 thermtrip_threshold_mask;
+ u16 thermctl_lvl0_offset;
+ u32 thermctl_lvl0_up_thresh_mask;
+ u32 thermctl_lvl0_dn_thresh_mask;
};
struct tegra_tsensor_configuration {
@@ -103,6 +111,8 @@ struct tegra_soctherm_soc {
const unsigned int num_ttgs;
const struct tegra_soctherm_fuse *tfuse;
const int thresh_grain;
+ const unsigned int bptt;
+ const bool use_ccroc;
};
int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
diff --git a/drivers/thermal/tegra/tegra124-soctherm.c b/drivers/thermal/tegra/tegra124-soctherm.c
index beb9d36b9c8a..36768630f78c 100644
--- a/drivers/thermal/tegra/tegra124-soctherm.c
+++ b/drivers/thermal/tegra/tegra124-soctherm.c
@@ -28,7 +28,11 @@
#define TEGRA124_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
#define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK 0xff
+#define TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK (0xff << 17)
+#define TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK (0xff << 9)
+
#define TEGRA124_THRESH_GRAIN 1000
+#define TEGRA124_BPTT 8
static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
.tall = 16300,
@@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
@@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
@@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+ .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
@@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+ .thermctl_lvl0_up_thresh_mask = TEGRA124_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA124_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
@@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra124_soctherm = {
.num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
.tfuse = &tegra124_soctherm_fuse,
.thresh_grain = TEGRA124_THRESH_GRAIN,
+ .bptt = TEGRA124_BPTT,
+ .use_ccroc = false,
};
diff --git a/drivers/thermal/tegra/tegra132-soctherm.c b/drivers/thermal/tegra/tegra132-soctherm.c
index e2aa84e1b307..97fa30501eb1 100644
--- a/drivers/thermal/tegra/tegra132-soctherm.c
+++ b/drivers/thermal/tegra/tegra132-soctherm.c
@@ -28,7 +28,11 @@
#define TEGRA132_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
#define TEGRA132_THERMTRIP_TSENSE_THRESH_MASK 0xff
+#define TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK (0xff << 17)
+#define TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK (0xff << 9)
+
#define TEGRA132_THRESH_GRAIN 1000
+#define TEGRA132_BPTT 8
static const struct tegra_tsensor_configuration tegra132_tsensor_config = {
.tall = 16300,
@@ -51,6 +55,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
@@ -66,6 +73,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
@@ -79,6 +89,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+ .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
@@ -94,6 +107,9 @@ static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+ .thermctl_lvl0_up_thresh_mask = TEGRA132_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA132_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra132_tsensor_groups[] = {
@@ -193,4 +209,6 @@ const struct tegra_soctherm_soc tegra132_soctherm = {
.num_ttgs = ARRAY_SIZE(tegra132_tsensor_groups),
.tfuse = &tegra132_soctherm_fuse,
.thresh_grain = TEGRA132_THRESH_GRAIN,
+ .bptt = TEGRA132_BPTT,
+ .use_ccroc = true,
};
diff --git a/drivers/thermal/tegra/tegra210-soctherm.c b/drivers/thermal/tegra/tegra210-soctherm.c
index 19cc0ab66f0e..ad53169a8e95 100644
--- a/drivers/thermal/tegra/tegra210-soctherm.c
+++ b/drivers/thermal/tegra/tegra210-soctherm.c
@@ -29,7 +29,11 @@
#define TEGRA210_THERMTRIP_CPU_THRESH_MASK (0x1ff << 9)
#define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK 0x1ff
+#define TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK (0x1ff << 18)
+#define TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK (0x1ff << 9)
+
#define TEGRA210_THRESH_GRAIN 500
+#define TEGRA210_BPTT 9
static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
.tall = 16300,
@@ -52,6 +56,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_CPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
@@ -67,6 +74,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_GPU,
+ .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
@@ -80,6 +90,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_TSENSE,
+ .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
@@ -95,6 +108,9 @@ static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
+ .thermctl_lvl0_offset = THERMCTL_LEVEL0_GROUP_MEM,
+ .thermctl_lvl0_up_thresh_mask = TEGRA210_THERMCTL_LVL0_UP_THRESH_MASK,
+ .thermctl_lvl0_dn_thresh_mask = TEGRA210_THERMCTL_LVL0_DN_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
@@ -194,4 +210,6 @@ const struct tegra_soctherm_soc tegra210_soctherm = {
.num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
.tfuse = &tegra210_soctherm_fuse,
.thresh_grain = TEGRA210_THRESH_GRAIN,
+ .bptt = TEGRA210_BPTT,
+ .use_ccroc = false,
};
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index e2fc6161dded..226b0b4aced6 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -520,6 +520,56 @@ exit:
}
EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
+void thermal_zone_set_trips(struct thermal_zone_device *tz)
+{
+ int low = -INT_MAX;
+ int high = INT_MAX;
+ int trip_temp, hysteresis;
+ int i, ret;
+
+ mutex_lock(&tz->lock);
+
+ if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
+ goto exit;
+
+ for (i = 0; i < tz->trips; i++) {
+ int trip_low;
+
+ tz->ops->get_trip_temp(tz, i, &trip_temp);
+ tz->ops->get_trip_hyst(tz, i, &hysteresis);
+
+ trip_low = trip_temp - hysteresis;
+
+ if (trip_low < tz->temperature && trip_low > low)
+ low = trip_low;
+
+ if (trip_temp > tz->temperature && trip_temp < high)
+ high = trip_temp;
+ }
+
+ /* No need to change trip points */
+ if (tz->prev_low_trip == low && tz->prev_high_trip == high)
+ goto exit;
+
+ tz->prev_low_trip = low;
+ tz->prev_high_trip = high;
+
+ dev_dbg(&tz->device,
+ "new temperature boundaries: %d < x < %d\n", low, high);
+
+ /*
+ * Set a temperature window. When this window is left the driver
+ * must inform the thermal core via thermal_zone_device_update.
+ */
+ ret = tz->ops->set_trips(tz, low, high);
+ if (ret)
+ dev_err(&tz->device, "Failed to set trips: %d\n", ret);
+
+exit:
+ mutex_unlock(&tz->lock);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_set_trips);
+
static void update_temperature(struct thermal_zone_device *tz)
{
int temp, ret;
@@ -557,7 +607,8 @@ static void thermal_zone_device_reset(struct thermal_zone_device *tz)
pos->initialized = false;
}
-void thermal_zone_device_update(struct thermal_zone_device *tz)
+void thermal_zone_device_update(struct thermal_zone_device *tz,
+ enum thermal_notify_event event)
{
int count;
@@ -569,6 +620,10 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
update_temperature(tz);
+ thermal_zone_set_trips(tz);
+
+ tz->notify_event = event;
+
for (count = 0; count < tz->trips; count++)
handle_thermal_trip(tz, count);
}
@@ -579,7 +634,7 @@ static void thermal_zone_device_check(struct work_struct *work)
struct thermal_zone_device *tz = container_of(work, struct
thermal_zone_device,
poll_queue.work);
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
}
/* sys I/F for thermal zone */
@@ -703,7 +758,7 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
if (ret)
return ret;
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
@@ -754,6 +809,9 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
*/
ret = tz->ops->set_trip_hyst(tz, trip, temperature);
+ if (!ret)
+ thermal_zone_set_trips(tz);
+
return ret ? ret : count;
}
@@ -822,7 +880,7 @@ passive_store(struct device *dev, struct device_attribute *attr,
tz->forced_passive = state;
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return count;
}
@@ -913,7 +971,7 @@ emul_temp_store(struct device *dev, struct device_attribute *attr,
}
if (!ret)
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return ret ? ret : count;
}
@@ -1509,7 +1567,8 @@ __thermal_cooling_device_register(struct device_node *np,
mutex_lock(&thermal_list_lock);
list_for_each_entry(pos, &thermal_tz_list, node)
if (atomic_cmpxchg(&pos->need_update, 1, 0))
- thermal_zone_device_update(pos);
+ thermal_zone_device_update(pos,
+ THERMAL_EVENT_UNSPECIFIED);
mutex_unlock(&thermal_list_lock);
return cdev;
@@ -1952,7 +2011,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
thermal_zone_device_reset(tz);
/* Update the new thermal zone and mark it as already updated. */
if (atomic_cmpxchg(&tz->need_update, 1, 0))
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
return tz;
@@ -2069,6 +2128,36 @@ exit:
}
EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
+/**
+ * thermal_zone_get_slope - return the slope attribute of the thermal zone
+ * @tz: thermal zone device with the slope attribute
+ *
+ * Return: If the thermal zone device has a slope attribute, return it, else
+ * return 1.
+ */
+int thermal_zone_get_slope(struct thermal_zone_device *tz)
+{
+ if (tz && tz->tzp)
+ return tz->tzp->slope;
+ return 1;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_slope);
+
+/**
+ * thermal_zone_get_offset - return the offset attribute of the thermal zone
+ * @tz: thermal zone device with the offset attribute
+ *
+ * Return: If the thermal zone device has a offset attribute, return it, else
+ * return 0.
+ */
+int thermal_zone_get_offset(struct thermal_zone_device *tz)
+{
+ if (tz && tz->tzp)
+ return tz->tzp->offset;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_offset);
+
#ifdef CONFIG_NET
static const struct genl_multicast_group thermal_event_mcgrps[] = {
{ .name = THERMAL_GENL_MCAST_GROUP_NAME, },
@@ -2209,7 +2298,8 @@ static int thermal_pm_notify(struct notifier_block *nb,
atomic_set(&in_suspend, 0);
list_for_each_entry(tz, &thermal_tz_list, node) {
thermal_zone_device_reset(tz);
- thermal_zone_device_update(tz);
+ thermal_zone_device_update(tz,
+ THERMAL_EVENT_UNSPECIFIED);
}
break;
default:
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 15c0a9ac2209..0586bd0f2bab 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -52,7 +52,7 @@ static void ti_thermal_work(struct work_struct *work)
struct ti_thermal_data *data = container_of(work,
struct ti_thermal_data, thermal_wq);
- thermal_zone_device_update(data->ti_thermal);
+ thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
data->ti_thermal->type);
@@ -205,7 +205,7 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
data->mode = mode;
ti_bandgap_write_update_interval(bgp, data->sensor_id,
data->ti_thermal->polling_delay);
- thermal_zone_device_update(data->ti_thermal);
+ thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
data->ti_thermal->polling_delay);
@@ -239,7 +239,7 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
return 0;
}
-static int __ti_thermal_get_trend(void *p, long *trend)
+static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend)
{
struct ti_thermal_data *data = p;
struct ti_bandgap *bgp;
@@ -252,22 +252,6 @@ static int __ti_thermal_get_trend(void *p, long *trend)
if (ret)
return ret;
- *trend = tr;
-
- return 0;
-}
-
-/* Get the temperature trend callback functions for thermal zone */
-static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
- int trip, enum thermal_trend *trend)
-{
- int ret;
- long tr;
-
- ret = __ti_thermal_get_trend(thermal->devdata, &tr);
- if (ret)
- return ret;
-
if (tr > 0)
*trend = THERMAL_TREND_RAISING;
else if (tr < 0)
@@ -278,6 +262,13 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
return 0;
}
+/* Get the temperature trend callback functions for thermal zone */
+static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trend *trend)
+{
+ return __ti_thermal_get_trend(thermal->devdata, trip, trend);
+}
+
/* Get critical temperature callback functions for thermal zone */
static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal,
int *temp)
diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c
index 10adcddc8821..c908150c268d 100644
--- a/drivers/thermal/user_space.c
+++ b/drivers/thermal/user_space.c
@@ -23,19 +23,30 @@
*/
#include <linux/thermal.h>
-
+#include <linux/slab.h>
#include "thermal_core.h"
/**
* notify_user_space - Notifies user space about thermal events
* @tz - thermal_zone_device
+ * @trip - Trip point index
*
* This function notifies the user space through UEvents.
*/
static int notify_user_space(struct thermal_zone_device *tz, int trip)
{
+ char *thermal_prop[5];
+ int i;
+
mutex_lock(&tz->lock);
- kobject_uevent(&tz->device.kobj, KOBJ_CHANGE);
+ thermal_prop[0] = kasprintf(GFP_KERNEL, "NAME=%s", tz->type);
+ thermal_prop[1] = kasprintf(GFP_KERNEL, "TEMP=%d", tz->temperature);
+ thermal_prop[2] = kasprintf(GFP_KERNEL, "TRIP=%d", trip);
+ thermal_prop[3] = kasprintf(GFP_KERNEL, "EVENT=%d", tz->notify_event);
+ thermal_prop[4] = NULL;
+ kobject_uevent_env(&tz->device.kobj, KOBJ_CHANGE, thermal_prop);
+ for (i = 0; i < 4; ++i)
+ kfree(thermal_prop[i]);
mutex_unlock(&tz->lock);
return 0;
}
diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c
index 97f0a2bd93ed..95f4c1bcdb4c 100644
--- a/drivers/thermal/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/x86_pkg_temp_thermal.c
@@ -348,7 +348,8 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
}
if (notify) {
pr_debug("thermal_zone_device_update\n");
- thermal_zone_device_update(phdev->tzone);
+ thermal_zone_device_update(phdev->tzone,
+ THERMAL_EVENT_UNSPECIFIED);
}
}
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
index 729ab9fc325e..2a99f1d52bb5 100644
--- a/include/dt-bindings/thermal/tegra124-soctherm.h
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -11,4 +11,9 @@
#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
#define TEGRA124_SOCTHERM_SENSOR_NUM 4
+#define TEGRA_SOCTHERM_THROT_LEVEL_LOW 0
+#define TEGRA_SOCTHERM_THROT_LEVEL_MED 1
+#define TEGRA_SOCTHERM_THROT_LEVEL_HIGH 2
+#define TEGRA_SOCTHERM_THROT_LEVEL_NONE -1
+
#endif
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index ee517bef0db0..511182a88e76 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -92,12 +92,24 @@ enum thermal_trend {
THERMAL_TREND_DROP_FULL, /* apply lowest cooling action */
};
+/* Thermal notification reason */
+enum thermal_notify_event {
+ THERMAL_EVENT_UNSPECIFIED, /* Unspecified event */
+ THERMAL_EVENT_TEMP_SAMPLE, /* New Temperature sample */
+ THERMAL_TRIP_VIOLATED, /* TRIP Point violation */
+ THERMAL_TRIP_CHANGED, /* TRIP Point temperature changed */
+ THERMAL_DEVICE_DOWN, /* Thermal device is down */
+ THERMAL_DEVICE_UP, /* Thermal device is up after a down event */
+ THERMAL_DEVICE_POWER_CAPABILITY_CHANGED, /* power capability changed */
+};
+
struct thermal_zone_device_ops {
int (*bind) (struct thermal_zone_device *,
struct thermal_cooling_device *);
int (*unbind) (struct thermal_zone_device *,
struct thermal_cooling_device *);
int (*get_temp) (struct thermal_zone_device *, int *);
+ int (*set_trips) (struct thermal_zone_device *, int, int);
int (*get_mode) (struct thermal_zone_device *,
enum thermal_device_mode *);
int (*set_mode) (struct thermal_zone_device *,
@@ -168,6 +180,10 @@ struct thermal_attr {
* @last_temperature: previous temperature read
* @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
* @passive: 1 if you've crossed a passive trip point, 0 otherwise.
+ * @prev_low_trip: the low current temperature if you've crossed a passive
+ trip point.
+ * @prev_high_trip: the above current temperature if you've crossed a
+ passive trip point.
* @forced_passive: If > 0, temperature at which to switch on all ACPI
* processor cooling devices. Currently only used by the
* step-wise governor.
@@ -182,6 +198,7 @@ struct thermal_attr {
* @lock: lock to protect thermal_instances list
* @node: node in thermal_tz_list (in thermal_core.c)
* @poll_queue: delayed work for polling
+ * @notify_event: Last notification event
*/
struct thermal_zone_device {
int id;
@@ -199,6 +216,8 @@ struct thermal_zone_device {
int last_temperature;
int emul_temperature;
int passive;
+ int prev_low_trip;
+ int prev_high_trip;
unsigned int forced_passive;
atomic_t need_update;
struct thermal_zone_device_ops *ops;
@@ -210,6 +229,7 @@ struct thermal_zone_device {
struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
+ enum thermal_notify_event notify_event;
};
/**
@@ -333,6 +353,9 @@ struct thermal_genl_event {
*
* Optional:
* @get_trend: a pointer to a function that reads the sensor temperature trend.
+ * @set_trips: a pointer to a function that sets a temperature window. When
+ * this window is left the driver must inform the thermal core via
+ * thermal_zone_device_update.
* @set_emul_temp: a pointer to a function that sets sensor emulated
* temperature.
* @set_trip_temp: a pointer to a function that sets the trip temperature on
@@ -340,7 +363,8 @@ struct thermal_genl_event {
*/
struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
- int (*get_trend)(void *, long *);
+ int (*get_trend)(void *, int, enum thermal_trend *);
+ int (*set_trips)(void *, int, int);
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
};
@@ -425,7 +449,9 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
unsigned int);
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
-void thermal_zone_device_update(struct thermal_zone_device *);
+void thermal_zone_device_update(struct thermal_zone_device *,
+ enum thermal_notify_event);
+void thermal_zone_set_trips(struct thermal_zone_device *);
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
const struct thermal_cooling_device_ops *);
@@ -435,6 +461,8 @@ thermal_of_cooling_device_register(struct device_node *np, char *, void *,
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
+int thermal_zone_get_slope(struct thermal_zone_device *tz);
+int thermal_zone_get_offset(struct thermal_zone_device *tz);
int get_tz_trend(struct thermal_zone_device *, int);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
@@ -473,7 +501,10 @@ static inline int thermal_zone_unbind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev)
{ return -ENODEV; }
-static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
+static inline void thermal_zone_device_update(struct thermal_zone_device *tz,
+ enum thermal_notify_event event)
+{ }
+static inline void thermal_zone_set_trips(struct thermal_zone_device *tz)
{ }
static inline struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
@@ -492,6 +523,12 @@ static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
static inline int thermal_zone_get_temp(
struct thermal_zone_device *tz, int *temp)
{ return -ENODEV; }
+static inline int thermal_zone_get_slope(
+ struct thermal_zone_device *tz)
+{ return -ENODEV; }
+static inline int thermal_zone_get_offset(
+ struct thermal_zone_device *tz)
+{ return -ENODEV; }
static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
{ return -ENODEV; }
static inline struct thermal_instance *