aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/phy.rst2
-rw-r--r--drivers/net/ethernet/broadcom/genet/bcmmii.c2
-rw-r--r--drivers/net/ethernet/realtek/r8169_main.c2
-rw-r--r--drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c4
-rw-r--r--drivers/net/mdio/mdio-moxart.c4
-rw-r--r--drivers/net/phy/icplus.c2
-rw-r--r--drivers/net/phy/phy.c2
-rw-r--r--drivers/net/phy/phy_device.c4
-rw-r--r--include/linux/phy.h10
9 files changed, 16 insertions, 16 deletions
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 399f17976a6c..70136cc9e25e 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -216,7 +216,7 @@ put into an unsupported state.
Lastly, once the controller is ready to handle network traffic, you call
phy_start(phydev). This tells the PAL that you are ready, and configures the
PHY to connect to the network. If the MAC interrupt of your network driver
-also handles PHY status changes, just set phydev->irq to PHY_IGNORE_INTERRUPT
+also handles PHY status changes, just set phydev->irq to PHY_MAC_INTERRUPT
before you call phy_start and use phy_mac_interrupt() from the network
driver. If you don't want to use interrupts, set phydev->irq to PHY_POLL.
phy_start() enables the PHY interrupts (if applicable) and starts the
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 17f997ef950f..5335244e4577 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -359,7 +359,7 @@ int bcmgenet_mii_probe(struct net_device *dev)
* those versions of GENET.
*/
if (priv->internal_phy && !GENET_IS_V5(priv))
- dev->phydev->irq = PHY_IGNORE_INTERRUPT;
+ dev->phydev->irq = PHY_MAC_INTERRUPT;
return 0;
}
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 44a438bad153..cbc30df4e08a 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5056,7 +5056,7 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
new_bus->name = "r8169";
new_bus->priv = tp;
new_bus->parent = &pdev->dev;
- new_bus->irq[0] = PHY_IGNORE_INTERRUPT;
+ new_bus->irq[0] = PHY_MAC_INTERRUPT;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "r8169-%x", pci_dev_id(pdev));
new_bus->read = r8169_mdio_read_reg;
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
index b1e7f7ab281c..fceb6d637235 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -203,8 +203,8 @@ int sxgbe_mdio_register(struct net_device *ndev)
case PHY_POLL:
irq_str = "POLL";
break;
- case PHY_IGNORE_INTERRUPT:
- irq_str = "IGNORE";
+ case PHY_MAC_INTERRUPT:
+ irq_str = "MAC";
break;
default:
sprintf(irq_num, "%d", phy->irq);
diff --git a/drivers/net/mdio/mdio-moxart.c b/drivers/net/mdio/mdio-moxart.c
index b72c6d185175..f0cff584e176 100644
--- a/drivers/net/mdio/mdio-moxart.c
+++ b/drivers/net/mdio/mdio-moxart.c
@@ -125,7 +125,7 @@ static int moxart_mdio_probe(struct platform_device *pdev)
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id);
bus->parent = &pdev->dev;
- /* Setting PHY_IGNORE_INTERRUPT here even if it has no effect,
+ /* Setting PHY_MAC_INTERRUPT here even if it has no effect,
* of_mdiobus_register() sets these PHY_POLL.
* Ideally, the interrupt from MAC controller could be used to
* detect link state changes, not polling, i.e. if there was
@@ -133,7 +133,7 @@ static int moxart_mdio_probe(struct platform_device *pdev)
* interrupt handled in ethernet drivercode.
*/
for (i = 0; i < PHY_MAX_ADDR; i++)
- bus->irq[i] = PHY_IGNORE_INTERRUPT;
+ bus->irq[i] = PHY_MAC_INTERRUPT;
data = bus->priv;
data->base = devm_platform_ioremap_resource(pdev, 0);
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 4e15d4d02488..3e431737c1ba 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -188,7 +188,7 @@ static int ip175c_read_status(struct phy_device *phydev)
genphy_read_status(phydev);
else
/* Don't need to read status for switch ports */
- phydev->irq = PHY_IGNORE_INTERRUPT;
+ phydev->irq = PHY_MAC_INTERRUPT;
return 0;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index fdb914b5b857..1be07e45d314 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1145,7 +1145,7 @@ void phy_state_machine(struct work_struct *work)
}
/* Only re-schedule a PHY state machine change if we are polling the
- * PHY, if PHY_IGNORE_INTERRUPT is set, then we will be moving
+ * PHY, if PHY_MAC_INTERRUPT is set, then we will be moving
* between states from phy_mac_interrupt().
*
* In state PHY_HALTED the PHY gets suspended, so rescheduling the
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 30a20a29ae05..05261698bf74 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1167,8 +1167,8 @@ char *phy_attached_info_irq(struct phy_device *phydev)
case PHY_POLL:
irq_str = "POLL";
break;
- case PHY_IGNORE_INTERRUPT:
- irq_str = "IGNORE";
+ case PHY_MAC_INTERRUPT:
+ irq_str = "MAC";
break;
default:
snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c130788306c8..5d7c4084ade9 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -71,11 +71,11 @@ extern const int phy_10gbit_features_array[1];
/*
* Set phydev->irq to PHY_POLL if interrupts are not supported,
- * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
- * the attached driver handles the interrupt
+ * or not desired for this PHY. Set to PHY_MAC_INTERRUPT if
+ * the attached MAC driver handles the interrupt
*/
#define PHY_POLL -1
-#define PHY_IGNORE_INTERRUPT -2
+#define PHY_MAC_INTERRUPT -2
#define PHY_IS_INTERNAL 0x00000001
#define PHY_RST_AFTER_CLK_EN 0x00000002
@@ -1202,11 +1202,11 @@ static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
* @phydev: the phy_device struct
*
* NOTE: must be kept in sync with addition/removal of PHY_POLL and
- * PHY_IGNORE_INTERRUPT
+ * PHY_MAC_INTERRUPT
*/
static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
{
- return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
+ return phydev->irq != PHY_POLL && phydev->irq != PHY_MAC_INTERRUPT;
}
/**