aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/input/walkera0701.txt109
-rw-r--r--drivers/input/joystick/Kconfig12
-rw-r--r--drivers/input/joystick/Makefile1
-rw-r--r--drivers/input/joystick/walkera0701.c292
4 files changed, 414 insertions, 0 deletions
diff --git a/Documentation/input/walkera0701.txt b/Documentation/input/walkera0701.txt
new file mode 100644
index 000000000000..8f4289efc5c4
--- /dev/null
+++ b/Documentation/input/walkera0701.txt
@@ -0,0 +1,109 @@
+
+Walkera WK-0701 transmitter is supplied with a ready to fly Walkera
+helicopters such as HM36, HM37, HM60. The walkera0701 module enables to use
+this transmitter as joystick
+
+Devel homepage and download:
+http://zub.fei.tuke.sk/walkera-wk0701/
+
+or use cogito:
+cg-clone http://zub.fei.tuke.sk/GIT/walkera0701-joystick
+
+
+Connecting to PC:
+
+At back side of transmitter S-video connector can be found. Modulation
+pulses from processor to HF part can be found at pin 2 of this connector,
+pin 3 is GND. Between pin 3 and CPU 5k6 resistor can be found. To get
+modulation pulses to PC, signal pulses must be amplified.
+
+Cable: (walkera TX to parport)
+
+Walkera WK-0701 TX S-VIDEO connector:
+ (back side of TX)
+ __ __ S-video: canon25
+ / |_| \ pin 2 (signal) NPN parport
+ / O 4 3 O \ pin 3 (GND) LED ________________ 10 ACK
+ ( O 2 1 O ) | C
+ \ ___ / 2 ________________________|\|_____|/
+ | [___] | |/| B |\
+ ------- 3 __________________________________|________________ 25 GND
+ E
+
+
+I use green LED and BC109 NPN transistor.
+
+Software:
+
+Build kernel with walkera0701 module. Module walkera0701 need exclusive
+access to parport, modules like lp must be unloaded before loading
+walkera0701 module, check dmesg for error messages. Connect TX to PC by
+cable and run jstest /dev/input/js0 to see values from TX. If no value can
+be changed by TX "joystick", check output from /proc/interrupts. Value for
+(usually irq7) parport must increase if TX is on.
+
+
+
+Technical details:
+
+Driver use interrupt from parport ACK input bit to measure pulse length
+using hrtimers.
+
+Frame format:
+Based on walkera WK-0701 PCM Format description by Shaul Eizikovich.
+(downloaded from http://www.smartpropoplus.com/Docs/Walkera_Wk-0701_PCM.pdf)
+
+Signal pulses:
+ (ANALOG)
+ SYNC BIN OCT
+ +---------+ +------+
+ | | | |
+--+ +------+ +---
+
+Frame:
+ SYNC , BIN1, OCT1, BIN2, OCT2 ... BIN24, OCT24, BIN25, next frame SYNC ..
+
+pulse length:
+ Binary values: Analog octal values:
+
+ 288 uS Binary 0 318 uS 000
+ 438 uS Binary 1 398 uS 001
+ 478 uS 010
+ 558 uS 011
+ 638 uS 100
+ 1306 uS SYNC 718 uS 101
+ 798 uS 110
+ 878 uS 111
+
+24 bin+oct values + 1 bin value = 24*4+1 bits = 97 bits
+
+(Warning, pulses on ACK ar inverted by transistor, irq is rised up on sync
+to bin change or octal value to bin change).
+
+Binary data representations:
+
+One binary and octal value can be grouped to nibble. 24 nibbles + one binary
+values can be sampled between sync pulses.
+
+Values for first four channels (analog joystick values) can be found in
+first 10 nibbles. Analog value is represented by one sign bit and 9 bit
+absolute binary value. (10 bits per channel). Next nibble is checksum for
+first ten nibbles.
+
+Next nibbles 12 .. 21 represents four channels (not all channels can be
+directly controlled from TX). Binary representations ar the same as in first
+four channels. In nibbles 22 and 23 is a special magic number. Nibble 24 is
+checksum for nibbles 12..23.
+
+After last octal value for nibble 24 and next sync pulse one additional
+binary value can be sampled. This bit and magic number is not used in
+software driver. Some details about this magic numbers can be found in
+Walkera_Wk-0701_PCM.pdf.
+
+Checksum calculation:
+
+Summary of octal values in nibbles must be same as octal value in checksum
+nibble (only first 3 bits are used). Binary value for checksum nibble is
+calculated by sum of binary values in checked nibbles + sum of octal values
+in checked nibbles divided by 8. Only bit 0 of this sum is used.
+
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index be5c14a5a0a4..268dd3fef0ab 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -294,4 +294,16 @@ config JOYSTICK_XPAD_LEDS
This option enables support for the LED which surrounds the Big X on
XBox 360 controller.
+config JOYSTICK_WALKERA0701
+ tristate "Walkera WK-0701 RC transmitter"
+ depends on HIGH_RES_TIMERS && PARPORT
+ help
+ Say Y or M here if you have a Walkera WK-0701 transmitter which is
+ supplied with a ready to fly Walkera helicopters such as HM36,
+ HM37, HM60 and want to use it via parport as a joystick. More
+ information is available: <file:Documentation/input/walkera0701.txt>
+
+ To compile this driver as a module, choose M here: the
+ module will be called walkera0701.
+
endif
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index fdbf8c4c2876..723036295685 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -29,4 +29,5 @@ obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
+obj-$(CONFIG_JOYSTICK_WALKERA0701) += walkera0701.o
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
new file mode 100644
index 000000000000..4dfa1eed4b7c
--- /dev/null
+++ b/drivers/input/joystick/walkera0701.c
@@ -0,0 +1,292 @@
+/*
+ * Parallel port to Walkera WK-0701 TX joystick
+ *
+ * Copyright (c) 2008 Peter Popovec
+ *
+ * More about driver: <file:Documentation/input/walkera0701.txt>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+
+/* #define WK0701_DEBUG */
+
+#define RESERVE 20000
+#define SYNC_PULSE 1306000
+#define BIN0_PULSE 288000
+#define BIN1_PULSE 438000
+
+#define ANALOG_MIN_PULSE 318000
+#define ANALOG_MAX_PULSE 878000
+#define ANALOG_DELTA 80000
+
+#define BIN_SAMPLE ((BIN0_PULSE + BIN1_PULSE) / 2)
+
+#define NO_SYNC 25
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/parport.h>
+#include <linux/input.h>
+#include <linux/hrtimer.h>
+
+MODULE_AUTHOR("Peter Popovec <popovec@fei.tuke.sk>");
+MODULE_DESCRIPTION("Walkera WK-0701 TX as joystick");
+MODULE_LICENSE("GPL");
+
+static unsigned int walkera0701_pp_no;
+module_param_named(port, walkera0701_pp_no, int, 0);
+MODULE_PARM_DESC(port,
+ "Parallel port adapter for Walkera WK-0701 TX (default is 0)");
+
+/*
+ * For now, only one device is supported, if somebody need more devices, code
+ * can be expanded, one struct walkera_dev per device must be allocated and
+ * set up by walkera0701_connect (release of device by walkera0701_disconnect)
+ */
+
+struct walkera_dev {
+ unsigned char buf[25];
+ u64 irq_time, irq_lasttime;
+ int counter;
+ int ack;
+
+ struct input_dev *input_dev;
+ struct hrtimer timer;
+
+ struct parport *parport;
+ struct pardevice *pardevice;
+};
+
+static struct walkera_dev w_dev;
+
+static inline void walkera0701_parse_frame(struct walkera_dev *w)
+{
+ int i;
+ int val1, val2, val3, val4, val5, val6, val7, val8;
+ int crc1, crc2;
+
+ for (crc1 = crc2 = i = 0; i < 10; i++) {
+ crc1 += w->buf[i] & 7;
+ crc2 += (w->buf[i] & 8) >> 3;
+ }
+ if ((w->buf[10] & 7) != (crc1 & 7))
+ return;
+ if (((w->buf[10] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
+ return;
+ for (crc1 = crc2 = 0, i = 11; i < 23; i++) {
+ crc1 += w->buf[i] & 7;
+ crc2 += (w->buf[i] & 8) >> 3;
+ }
+ if ((w->buf[23] & 7) != (crc1 & 7))
+ return;
+ if (((w->buf[23] & 8) >> 3) != (((crc1 >> 3) + crc2) & 1))
+ return;
+ val1 = ((w->buf[0] & 7) * 256 + w->buf[1] * 16 + w->buf[2]) >> 2;
+ val1 *= ((w->buf[0] >> 2) & 2) - 1; /* sign */
+ val2 = (w->buf[2] & 1) << 8 | (w->buf[3] << 4) | w->buf[4];
+ val2 *= (w->buf[2] & 2) - 1; /* sign */
+ val3 = ((w->buf[5] & 7) * 256 + w->buf[6] * 16 + w->buf[7]) >> 2;
+ val3 *= ((w->buf[5] >> 2) & 2) - 1; /* sign */
+ val4 = (w->buf[7] & 1) << 8 | (w->buf[8] << 4) | w->buf[9];
+ val4 *= (w->buf[7] & 2) - 1; /* sign */
+ val5 = ((w->buf[11] & 7) * 256 + w->buf[12] * 16 + w->buf[13]) >> 2;
+ val5 *= ((w->buf[11] >> 2) & 2) - 1; /* sign */
+ val6 = (w->buf[13] & 1) << 8 | (w->buf[14] << 4) | w->buf[15];
+ val6 *= (w->buf[13] & 2) - 1; /* sign */
+ val7 = ((w->buf[16] & 7) * 256 + w->buf[17] * 16 + w->buf[18]) >> 2;
+ val7 *= ((w->buf[16] >> 2) & 2) - 1; /*sign */
+ val8 = (w->buf[18] & 1) << 8 | (w->buf[19] << 4) | w->buf[20];
+ val8 *= (w->buf[18] & 2) - 1; /*sign */
+
+#ifdef WK0701_DEBUG
+ {
+ int magic, magic_bit;
+ magic = (w->buf[21] << 4) | w->buf[22];
+ magic_bit = (w->buf[24] & 8) >> 3;
+ printk(KERN_DEBUG
+ "walkera0701: %4d %4d %4d %4d %4d %4d %4d %4d (magic %2x %d)\n",
+ val1, val2, val3, val4, val5, val6, val7, val8, magic,
+ magic_bit);
+ }
+#endif
+ input_report_abs(w->input_dev, ABS_X, val2);
+ input_report_abs(w->input_dev, ABS_Y, val1);
+ input_report_abs(w->input_dev, ABS_Z, val6);
+ input_report_abs(w->input_dev, ABS_THROTTLE, val3);
+ input_report_abs(w->input_dev, ABS_RUDDER, val4);
+ input_report_abs(w->input_dev, ABS_MISC, val7);
+ input_report_key(w->input_dev, BTN_GEAR_DOWN, val5 > 0);
+}
+
+static inline int read_ack(struct pardevice *p)
+{
+ return parport_read_status(p->port) & 0x40;
+}
+
+/* falling edge, prepare to BIN value calculation */
+static void walkera0701_irq_handler(void *handler_data)
+{
+ u64 pulse_time;
+ struct walkera_dev *w = handler_data;
+
+ w->irq_time = ktime_to_ns(ktime_get());
+ pulse_time = w->irq_time - w->irq_lasttime;
+ w->irq_lasttime = w->irq_time;
+
+ /* cancel timer, if in handler or active do resync */
+ if (unlikely(0 != hrtimer_try_to_cancel(&w->timer))) {
+ w->counter = NO_SYNC;
+ return;
+ }
+
+ if (w->counter < NO_SYNC) {
+ if (w->ack) {
+ pulse_time -= BIN1_PULSE;
+ w->buf[w->counter] = 8;
+ } else {
+ pulse_time -= BIN0_PULSE;
+ w->buf[w->counter] = 0;
+ }
+ if (w->counter == 24) { /* full frame */
+ walkera0701_parse_frame(w);
+ w->counter = NO_SYNC;
+ if (abs(pulse_time - SYNC_PULSE) < RESERVE) /* new frame sync */
+ w->counter = 0;
+ } else {
+ if ((pulse_time > (ANALOG_MIN_PULSE - RESERVE)
+ && (pulse_time < (ANALOG_MAX_PULSE + RESERVE)))) {
+ pulse_time -= (ANALOG_MIN_PULSE - RESERVE);
+ pulse_time = (u32) pulse_time / ANALOG_DELTA; /* overtiping is safe, pulsetime < s32.. */
+ w->buf[w->counter++] |= (pulse_time & 7);
+ } else
+ w->counter = NO_SYNC;
+ }
+ } else if (abs(pulse_time - SYNC_PULSE - BIN0_PULSE) <
+ RESERVE + BIN1_PULSE - BIN0_PULSE) /* frame sync .. */
+ w->counter = 0;
+
+ hrtimer_start(&w->timer, ktime_set(0, BIN_SAMPLE), HRTIMER_MODE_REL);
+}
+
+static enum hrtimer_restart timer_handler(struct hrtimer
+ *handle)
+{
+ struct walkera_dev *w;
+
+ w = container_of(handle, struct walkera_dev, timer);
+ w->ack = read_ack(w->pardevice);
+
+ return HRTIMER_NORESTART;
+}
+
+static int walkera0701_open(struct input_dev *dev)
+{
+ struct walkera_dev *w = input_get_drvdata(dev);
+
+ parport_enable_irq(w->parport);
+ return 0;
+}
+
+static void walkera0701_close(struct input_dev *dev)
+{
+ struct walkera_dev *w = input_get_drvdata(dev);
+
+ parport_disable_irq(w->parport);
+}
+
+static int walkera0701_connect(struct walkera_dev *w, int parport)
+{
+ int err = -ENODEV;
+
+ w->parport = parport_find_number(parport);
+ if (w->parport == NULL)
+ return -ENODEV;
+
+ if (w->parport->irq == -1) {
+ printk(KERN_ERR "walkera0701: parport without interrupt\n");
+ goto init_err;
+ }
+
+ err = -EBUSY;
+ w->pardevice = parport_register_device(w->parport, "walkera0701",
+ NULL, NULL, walkera0701_irq_handler,
+ PARPORT_DEV_EXCL, w);
+ if (!w->pardevice)
+ goto init_err;
+
+ if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT))
+ goto init_err1;
+
+ if (parport_claim(w->pardevice))
+ goto init_err1;
+
+ w->input_dev = input_allocate_device();
+ if (!w->input_dev)
+ goto init_err2;
+
+ input_set_drvdata(w->input_dev, w);
+ w->input_dev->name = "Walkera WK-0701 TX";
+ w->input_dev->phys = w->parport->name;
+ w->input_dev->id.bustype = BUS_PARPORT;
+
+ /* TODO what id vendor/product/version ? */
+ w->input_dev->id.vendor = 0x0001;
+ w->input_dev->id.product = 0x0001;
+ w->input_dev->id.version = 0x0100;
+ w->input_dev->open = walkera0701_open;
+ w->input_dev->close = walkera0701_close;
+
+ w->input_dev->evbit[0] = BIT(EV_ABS) | BIT_MASK(EV_KEY);
+ w->input_dev->keybit[BIT_WORD(BTN_GEAR_DOWN)] = BIT_MASK(BTN_GEAR_DOWN);
+
+ input_set_abs_params(w->input_dev, ABS_X, -512, 512, 0, 0);
+ input_set_abs_params(w->input_dev, ABS_Y, -512, 512, 0, 0);
+ input_set_abs_params(w->input_dev, ABS_Z, -512, 512, 0, 0);
+ input_set_abs_params(w->input_dev, ABS_THROTTLE, -512, 512, 0, 0);
+ input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
+ input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
+
+ err = input_register_device(w->input_dev);
+ if (err)
+ goto init_err3;
+
+ hrtimer_init(&w->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ w->timer.function = timer_handler;
+ return 0;
+
+ init_err3:
+ input_free_device(w->input_dev);
+ init_err2:
+ parport_release(w->pardevice);
+ init_err1:
+ parport_unregister_device(w->pardevice);
+ init_err:
+ parport_put_port(w->parport);
+ return err;
+}
+
+static void walkera0701_disconnect(struct walkera_dev *w)
+{
+ hrtimer_cancel(&w->timer);
+ input_unregister_device(w->input_dev);
+ parport_release(w->pardevice);
+ parport_unregister_device(w->pardevice);
+ parport_put_port(w->parport);
+}
+
+static int __init walkera0701_init(void)
+{
+ return walkera0701_connect(&w_dev, walkera0701_pp_no);
+}
+
+static void __exit walkera0701_exit(void)
+{
+ walkera0701_disconnect(&w_dev);
+}
+
+module_init(walkera0701_init);
+module_exit(walkera0701_exit);