diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
67 files changed, 517 insertions, 256 deletions
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml new file mode 100644 index 000000000000..a5cf040ab4ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Display + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The LCD Controller (LCDC) consists of logic for transferring LCD image data + from an external display buffer to a TFT LCD panel. The LCDC has one display + input buffer per layer that fetches pixels through the single bus host + interface and a look-up table to allow palletized display configurations. The + LCDC is programmable on a per layer basis, and supports different LCD + resolutions, window sizes, image formats and pixel depths. + +# We need a select here since this schema is applicable only for nodes with the +# following properties + +select: + anyOf: + - required: [ 'atmel,dmacon' ] + - required: [ 'atmel,lcdcon2' ] + - required: [ 'atmel,guard-time' ] + +properties: + atmel,dmacon: + $ref: /schemas/types.yaml#/definitions/uint32 + description: dma controller configuration + + atmel,lcdcon2: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd controller configuration + + atmel,guard-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd guard time (Delay in frame periods) + maximum: 127 + + bits-per-pixel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: lcd panel bit-depth. + enum: [1, 2, 4, 8, 16, 24, 32] + + atmel,lcdcon-backlight: + $ref: /schemas/types.yaml#/definitions/flag + description: enable backlight + + atmel,lcdcon-backlight-inverted: + $ref: /schemas/types.yaml#/definitions/flag + description: invert backlight PWM polarity + + atmel,lcd-wiring-mode: + $ref: /schemas/types.yaml#/definitions/string + description: lcd wiring mode "RGB" or "BRG" + enum: + - RGB + - BRG + + atmel,power-control-gpio: + description: gpio to power on or off the LCD (as many as needed) + maxItems: 1 + + display-timings: + $ref: panel/display-timings.yaml# + +required: + - atmel,dmacon + - atmel,lcdcon2 + - atmel,guard-time + - bits-per-pixel + +additionalProperties: false + +examples: + - | + display: panel { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt deleted file mode 100644 index b5e355ada2fa..000000000000 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ /dev/null @@ -1,87 +0,0 @@ -Atmel LCDC Framebuffer ------------------------------------------------------ - -Required properties: -- compatible : - "atmel,at91sam9261-lcdc" , - "atmel,at91sam9263-lcdc" , - "atmel,at91sam9g10-lcdc" , - "atmel,at91sam9g45-lcdc" , - "atmel,at91sam9g45es-lcdc" , - "atmel,at91sam9rl-lcdc" , -- reg : Should contain 1 register ranges(address and length). - Can contain an additional register range(address and length) - for fixed framebuffer memory. Useful for dedicated memories. -- interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node - -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. - -Optional properties: -- lcd-supply: Regulator for LCD supply voltage. - -Example: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9g45-lcdc"; - reg = <0x00500000 0x1000>; - interrupts = <23 3 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fb>; - display = <&display0>; - #address-cells = <1>; - #size-cells = <1>; - - }; - -Example for fixed framebuffer memory: - - fb0: fb@00500000 { - compatible = "atmel,at91sam9263-lcdc"; - reg = <0x00700000 0x1000 0x70000000 0x200000>; - [...] - }; - -Atmel LCDC Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - atmel,dmacon: dma controller configuration - - atmel,lcdcon2: lcd controller configuration - - atmel,guard-time: lcd guard time (Delay in frame periods) - - bits-per-pixel: lcd panel bit-depth. - -Optional properties (as per of_videomode_helper): - - atmel,lcdcon-backlight: enable backlight - - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) - -Example: - display0: display { - bits-per-pixel = <32>; - atmel,lcdcon-backlight; - atmel,dmacon = <0x1>; - atmel,lcdcon2 = <0x80008002>; - atmel,guard-time = <9>; - atmel,lcd-wiring-mode = <1>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hback-porch = <1>; - hfront-porch = <1>; - vback-porch = <40>; - vfront-porch = <1>; - hsync-len = <45>; - vsync-len = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml new file mode 100644 index 000000000000..1b6f7e395006 --- /dev/null +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip's LCDC Framebuffer + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Dharma Balasubiramani <dharma.b@microchip.com> + +description: + The LCDC works with a framebuffer, which is a section of memory that contains + a complete frame of data representing pixel values for the display. The LCDC + reads the pixel data from the framebuffer and sends it to the LCD panel to + render the image. + +properties: + compatible: + enum: + - atmel,at91sam9261-lcdc + - atmel,at91sam9263-lcdc + - atmel,at91sam9g10-lcdc + - atmel,at91sam9g45-lcdc + - atmel,at91sam9g45es-lcdc + - atmel,at91sam9rl-lcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: hclk + - const: lcdc_clk + + display: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle pointing to the display node. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - display + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/interrupt-controller/irq.h> + fb@500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "hclk", "lcdc_clk"; + display = <&display>; + }; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt deleted file mode 100644 index 3a401590320f..000000000000 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt +++ /dev/null @@ -1,112 +0,0 @@ -The Exynos display port interface should be configured based on -the type of panel connected to it. - -We use two nodes: - -dp-controller node - -dptx-phy node(defined inside dp-controller node) - -For the DP-PHY initialization, we use the dptx-phy node. -Required properties for dptx-phy: deprecated, use phys and phy-names - -reg: deprecated - Base address of DP PHY register. - -samsung,enable-mask: deprecated - The bit-mask used to enable/disable DP PHY. - -For the Panel initialization, we read data from dp-controller node. -Required properties for dp-controller: - -compatible: - should be "samsung,exynos5-dp". - -reg: - physical base address of the controller and length - of memory mapped region. - -interrupts: - interrupt combiner values. - -clocks: - from common clock binding: handle to dp clock. - -clock-names: - from common clock binding: Shall be "dp". - -phys: - from general PHY binding: the phandle for the PHY device. - -phy-names: - from general PHY binding: Should be "dp". - -Optional properties for dp-controller: - -interlaced: - interlace scan mode. - Progressive if defined, Interlaced if not defined - -vsync-active-high: - VSYNC polarity configuration. - High if defined, Low if not defined - -hsync-active-high: - HSYNC polarity configuration. - High if defined, Low if not defined - -samsung,hpd-gpio: - Hotplug detect GPIO. - Indicates which GPIO should be used for hotplug - detection - -video interfaces: Device node can contain video interface port - nodes according to [1]. - - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/display/panel/display-timing.txt - -For the below properties, please refer to Analogix DP binding document: - * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml - -phys (required) - -phy-names (required) - -hpd-gpios (optional) - force-hpd (optional) - -Deprecated properties for DisplayPort: --interlaced: deprecated prop that can parsed from drm_display_mode. --vsync-active-high: deprecated prop that can parsed from drm_display_mode. --hsync-active-high: deprecated prop that can parsed from drm_display_mode. --samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode. --samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode. --samsung,color-space: deprecated prop that can parsed from drm_display_info. --samsung,color-depth: deprecated prop that can parsed from drm_display_info. --samsung,link-rate: deprecated prop that can reading from monitor by dpcd method. --samsung,lane-count: deprecated prop that can reading from monitor by dpcd method. --samsung,hpd-gpio: deprecated name for hpd-gpios. - -------------------------------------------------------------------------------- - -Example: - -SOC specific portion: - dp-controller { - compatible = "samsung,exynos5-dp"; - reg = <0x145b0000 0x10000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - clocks = <&clock 342>; - clock-names = "dp"; - - phys = <&dp_phy>; - phy-names = "dp"; - }; - -Board Specific portion: - dp-controller { - display-timings { - native-mode = <&lcd_timing>; - lcd_timing: 1366x768 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml index acd2f3faa6b9..0aa2d3fbadaa 100644 --- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml +++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml @@ -17,10 +17,12 @@ properties: compatible: const: abt,y030xx067a + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml index 75a09df68ba0..2399cabf044c 100644 --- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml +++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml @@ -21,7 +21,10 @@ allOf: properties: compatible: const: asus,z00t-tm5p5-n35596 - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: core voltage supply diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml index a8f3afa922c8..8b7448ad9138 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -26,6 +26,9 @@ properties: compatible: const: boe,bf060y8m-aj0 + reg: + maxItems: 1 + elvdd-supply: description: EL Driving positive (VDD) supply (4.40-4.80V) elvss-supply: @@ -38,7 +41,6 @@ properties: description: I/O voltage supply (1.62-1.98V) port: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml index 272a3a018a33..f2496cdd9260 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml @@ -18,9 +18,11 @@ properties: - const: boe,himax8279d8p - const: boe,himax8279d10p + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true pp33-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml index 32df26cbfeed..5eaccce13c21 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -18,7 +18,9 @@ properties: # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel - boe,th101mb31ig002-28a - reg: true + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 906ef62709b8..9e603cad1348 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -38,7 +38,7 @@ properties: - starry,ili9882t reg: - description: the virtual channel number of a DSI peripheral + maxItems: 1 enable-gpios: description: a GPIO spec for the enable pin diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml index 265ab6d30572..f4cb825d1e96 100644 --- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml +++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: elida,kd35t133 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml index d13c4bd26de4..9847da784cc8 100644 --- a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml +++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml @@ -17,6 +17,9 @@ properties: compatible: const: fascontek,fs035vg158 + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml index 81adb82f061d..0d8707a5844d 100644 --- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml +++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: feixin,k101-im2ba02 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true avdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml index 174661d13811..56bcd152f43c 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml @@ -21,6 +21,9 @@ properties: contains: const: djn,9a-3r063-1102b + reg: + maxItems: 1 + vdd1-supply: description: Digital voltage rail @@ -30,7 +33,6 @@ properties: vsp-supply: description: Negative source voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml index 916bb7f94206..644387e4fb6f 100644 --- a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml +++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml @@ -26,7 +26,8 @@ properties: - powkiddy,x55-panel - const: himax,hx8394 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml index 3cabbba86581..ef5a2240b684 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -24,6 +24,9 @@ properties: - newhaven,1.8-128160EF - const: ilitek,ili9163 + reg: + maxItems: 1 + spi-max-frequency: maximum: 32000000 @@ -32,7 +35,6 @@ properties: description: Display data/command selection (D/CX) backlight: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 7d221ef35443..44423465f6e3 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -26,6 +26,9 @@ properties: - dlink,dir-685-panel - const: ilitek,ili9322 + reg: + maxItems: 1 + reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 94f169ea065a..5f41758c96d5 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -28,7 +28,8 @@ properties: - canaan,kd233-tft - const: ilitek,ili9341 - reg: true + reg: + maxItems: 1 dc-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml index f4f91f93f490..ff67129c9466 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml @@ -20,9 +20,11 @@ properties: - tianma,tm041xdhg01 - const: ilitek,ili9805 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index a015dce72f60..baf5dfe5f5eb 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -24,9 +24,11 @@ properties: - wanchanglong,w552946aba - const: ilitek,ili9881c + reg: + maxItems: 1 + backlight: true power-supply: true - reg: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml index 72788e3e6c59..c7df9a7f6589 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml @@ -17,10 +17,12 @@ properties: compatible: const: innolux,ej030na + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true required: diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml index 5a5f071627fb..4164e3f7061d 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -16,9 +16,11 @@ properties: compatible: const: innolux,p097pfg + reg: + maxItems: 1 + backlight: true enable-gpios: true - reg: true avdd-supply: description: The regulator that provides positive voltage diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml index 41eb7fbf7715..20afdb4568a2 100644 --- a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml +++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml @@ -21,7 +21,8 @@ properties: - radxa,display-8hd-ad002 - const: jadard,jd9365da-h3 - reg: true + reg: + maxItems: 1 vdd-supply: description: supply regulator for VDD, usually 3.3V diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml index 2f4d27a309a7..a8621459005b 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml @@ -26,7 +26,9 @@ properties: compatible: const: jdi,lpm102a188a - reg: true + reg: + maxItems: 1 + enable-gpios: true reset-gpios: true power-supply: true diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index 63c82a4378ff..0c8b5cb78bfe 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -16,8 +16,10 @@ properties: compatible: const: jdi,lt070me05000 + reg: + maxItems: 1 + enable-gpios: true - reg: true reset-gpios: true vddp-supply: diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml index b4be9bd8ddde..d86c916f7b55 100644 --- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml +++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml @@ -17,10 +17,12 @@ properties: compatible: const: kingdisplay,kd035g6-54nt + reg: + maxItems: 1 + backlight: true port: true power-supply: true - reg: true reset-gpios: true spi-3wire: true diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml index 7a55961e1a3d..b5dc02b27200 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml @@ -18,6 +18,9 @@ properties: compatible: const: leadtek,ltk035c5444t + reg: + maxItems: 1 + spi-3wire: true required: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml index a40ab887ada7..e2a2dd4ef5fa 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml @@ -18,7 +18,10 @@ properties: - leadtek,ltk050h3146w - leadtek,ltk050h3146w-a2 - leadtek,ltk050h3148w - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml index d589f1677214..af9e0ea0e72f 100644 --- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml @@ -17,7 +17,10 @@ properties: enum: - leadtek,ltk101b4029w - leadtek,ltk500hd1829 - reg: true + + reg: + maxItems: 1 + backlight: true reset-gpios: true iovcc-supply: diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml index ee357e139ac0..590ccc27d104 100644 --- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml +++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml @@ -21,7 +21,8 @@ properties: compatible: const: lg,lg4573 - reg: true + reg: + maxItems: 1 required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml index 628c4b898111..3de17fd8513b 100644 --- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml @@ -17,6 +17,9 @@ properties: compatible: const: lgphilips,lb035q02 + reg: + maxItems: 1 + label: true enable-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml index accf933d6e46..1cffe4d6d498 100644 --- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml +++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml @@ -21,9 +21,11 @@ properties: compatible: const: nec,nl8048hl11 + reg: + maxItems: 1 + label: true port: true - reg: true reset-gpios: true spi-max-frequency: diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml index 7a634fbc465e..d3a25a8fd7e3 100644 --- a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml +++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml @@ -24,7 +24,9 @@ properties: - powkiddy,rk2023-panel - const: newvision,nv3051d - reg: true + reg: + maxItems: 1 + backlight: true port: true reset-gpios: diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index 91921f4b0e5f..bb50fd5506c3 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -24,7 +24,10 @@ properties: string determines how the NT35510 panel driver shall be configured to work with the indicated panel. The novatek,nt35510 compatible shall always be provided as a fallback. - reg: true + + reg: + maxItems: 1 + reset-gpios: true vdd-supply: description: regulator that supplies the vdd voltage diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml index 7cac93b20944..a9e40493986b 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -33,6 +33,9 @@ properties: to work with the indicated panel. The novatek,nt35950 compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -49,7 +52,6 @@ properties: backlight: true ports: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml index bbeea8cfa5fb..c4bae4f77085 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml @@ -27,6 +27,9 @@ properties: - lenovo,j606f-boe-nt36523w - const: novatek,nt36523w + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA @@ -34,7 +37,6 @@ properties: vddio-supply: description: regulator that supplies the I/O voltage - reg: true rotation: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index ae821f465e1c..800a2f0a4dad 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -29,6 +29,9 @@ properties: determines how the NT36672A panel driver is configured for the indicated panel. The novatek,nt36672a compatible shall always be provided as a fallback. + reg: + maxItems: 1 + reset-gpios: maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio @@ -44,7 +47,6 @@ properties: vddneg-supply: description: phandle of the negative boost supply regulator - reg: true port: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml index 72463795e4c6..e5d8785fdf90 100644 --- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml +++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml @@ -38,10 +38,12 @@ properties: compatible: const: olimex,lcd-olinuxino + reg: + maxItems: 1 + backlight: true enable-gpios: true power-supply: true - reg: true required: - compatible diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml index e808215cb39e..d0ac31ab60cf 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml @@ -71,6 +71,9 @@ properties: - shineworld,lh133k - const: panel-mipi-dbi-spi + reg: + maxItems: 1 + write-only: type: boolean description: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index d62fd692bf10..4825792bf712 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -16,7 +16,9 @@ properties: compatible: const: raydium,rm67191 - reg: true + reg: + maxItems: 1 + port: true reset-gpios: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml index f436ba6738ca..7ad223f98253 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml @@ -22,6 +22,9 @@ properties: - const: fairphone,fp5-rm692e5-boe - const: raydium,rm692e5 + reg: + maxItems: 1 + dvdd-supply: description: Digital voltage rail @@ -31,7 +34,6 @@ properties: vddio-supply: description: I/O voltage rail - reg: true port: true required: diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 95ce22c6787a..04f86e0cbac9 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -14,7 +14,7 @@ properties: const: ronbo,rb070d30 reg: - description: MIPI-DSI virtual channel + maxItems: 1 power-gpios: description: GPIO used for the power pin diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml index ccc482570d6a..e8f9e9d06a29 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml @@ -33,7 +33,9 @@ properties: # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel - samsung,s6e3hf2 - reg: true + reg: + maxItems: 1 + reset-gpios: true enable-gpios: true te-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml index 58fa073ce258..e081c84a932b 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml @@ -11,12 +11,15 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: const: samsung,ams495qa01 - reg: true + reg: + maxItems: 1 + reset-gpios: description: reset gpio, must be GPIO_ACTIVE_LOW elvdd-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml index c0fabeb38628..bc92b16c95b9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml @@ -17,9 +17,11 @@ properties: compatible: const: samsung,ld9040 + reg: + maxItems: 1 + display-timings: true port: true - reg: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml index 70ffc88d2a08..7ce8540551f9 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -21,7 +21,8 @@ properties: compatible: const: samsung,lms380kf01 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml index 5e77cee93f83..9363032883de 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,lms397kf04 - reg: true + reg: + maxItems: 1 reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml index 66d147496bc3..2af5bc47323f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -16,8 +16,10 @@ properties: compatible: const: samsung,s6d16d0 + reg: + maxItems: 1 + port: true - reg: true reset-gpios: true vdd1-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml index d273faf4442a..d74904164719 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml @@ -20,7 +20,8 @@ properties: compatible: const: samsung,s6d27a1 - reg: true + reg: + maxItems: 1 interrupts: description: provides an optional ESD (electrostatic discharge) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml index 45a236d2cc70..939da65114bf 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -24,7 +24,8 @@ properties: - samsung,ltl101at01 - const: samsung,s6d7aa0 - reg: true + reg: + maxItems: 1 backlight: description: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 6f1fc7469f07..c47e2a1a30e5 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -18,7 +18,9 @@ properties: compatible: const: samsung,s6e63m0 - reg: true + reg: + maxItems: 1 + reset-gpios: true port: true default-brightness: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml index b749e9e906b7..42634fc3b5b2 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: samsung,s6e88a0-ams452ef01 - reg: true + + reg: + maxItems: 1 + port: true reset-gpios: true vdd3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index 200fbf1c74a0..4601fa460680 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -16,7 +16,9 @@ properties: compatible: const: samsung,s6e8aa0 - reg: true + reg: + maxItems: 1 + reset-gpios: true display-timings: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml index 57b44a0e763d..ce820b96a7e2 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml @@ -37,7 +37,9 @@ properties: - enum: - sharp,lq101r1sx01 - reg: true + reg: + maxItems: 1 + power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml index a90d0d8bf7c9..b6ea246430ce 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls043t1le01-qhd - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml index 271c097cc9a4..77a4fce129e7 100644 --- a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml @@ -16,7 +16,9 @@ properties: compatible: const: sharp,ls060t1sx01 - reg: true + reg: + maxItems: 1 + backlight: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml index ef162b51d010..0ce2ea13583d 100644 --- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml +++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml @@ -21,7 +21,9 @@ properties: - jasonic,jt240mhqs-hwt-ek-e3 - sitronix,st7789v - reg: true + reg: + maxItems: 1 + reset-gpios: true power-supply: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index 059cc6dbcfca..fd778a20f760 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -22,7 +22,10 @@ properties: enum: - sony,acx424akp - sony,acx424akm - reg: true + + reg: + maxItems: 1 + reset-gpios: true vddi-supply: description: regulator that supplies the vddi voltage diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml index 98abdf4ddeac..5a8260224b74 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml @@ -17,6 +17,9 @@ properties: compatible: const: sony,acx565akm + reg: + maxItems: 1 + label: true reset-gpios: true port: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml index 07bce556ad40..191b692125e1 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml @@ -20,7 +20,8 @@ properties: compatible: const: sony,td4353-jdi-tama - reg: true + reg: + maxItems: 1 backlight: true width-mm: true diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml index 967972939598..a58a31349757 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -21,7 +21,8 @@ properties: compatible: const: sony,tulip-truly-nt35521 - reg: true + reg: + maxItems: 1 positive5-supply: description: Positive 5V supply diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml index e5617d125567..2fd6e0ec3682 100644 --- a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml +++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml @@ -19,15 +19,17 @@ properties: - sharp,ls068b3sx02 - const: syna,r63353 + reg: + maxItems: 1 + avdd-supply: true dvdd-supply: true - reg: true required: - compatible + - reg - avdd-supply - dvdd-supply - - reg - reset-gpios - port - backlight diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml index e8c8ee8d7c88..7edd29df4bbb 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml @@ -22,7 +22,9 @@ properties: # Toppoly TD043MTEA1 Panel - tpo,td043mtea1 - reg: true + reg: + maxItems: 1 + label: true reset-gpios: true backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index f0243d196191..59a373728e62 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -52,7 +52,8 @@ properties: - const: tpo,tpg110 - const: tpo,tpg110 - reg: true + reg: + maxItems: 1 grestb-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml index 772399067515..30047a62fc11 100644 --- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -20,7 +20,8 @@ properties: compatible: const: visionox,rm69299-1080p-display - reg: true + reg: + maxItems: 1 vdda-supply: description: | diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml index c407deb6afb1..9c9743a23500 100644 --- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml @@ -15,7 +15,10 @@ allOf: properties: compatible: const: xinpeng,xpp055c272 - reg: true + + reg: + maxItems: 1 + backlight: true port: true reset-gpios: true diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml new file mode 100644 index 000000000000..dda9097a7911 --- /dev/null +++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos5250/Exynos5420 SoC Display Port + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + const: samsung,exynos5-dp + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dp + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + interrupts: + maxItems: 1 + + hpd-gpios: + description: + Hotplug detect GPIO. + Indicates which GPIO should be used for hotplug detection + + phys: + maxItems: 1 + + phy-names: + items: + - const: dp + + power-domains: + maxItems: 1 + + interlaced: + type: boolean + deprecated: true + description: + Interlace scan mode. Progressive if defined, interlaced if not defined. + + vsync-active-high: + type: boolean + deprecated: true + description: + VSYNC polarity configuration. High if defined, low if not defined + + hsync-active-high: + type: boolean + deprecated: true + description: + HSYNC polarity configuration. High if defined, low if not defined + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with one endpoint connected to a dp-connector node. + + required: + - port + + samsung,hpd-gpios: + maxItems: 1 + deprecated: true + + samsung,ycbcr-coeff: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,dynamic-range: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_mode. + + samsung,color-space: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,color-depth: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can parsed from drm_display_info. + + samsung,link-rate: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + + samsung,lane-count: + $ref: /schemas/types.yaml#/definitions/uint32 + deprecated: true + description: + Deprecated prop that can reading from monitor by dpcd method. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + dp-controller@145b0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145b0000 0x1000>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + phys = <&dp_phy>; + phy-names = "dp"; + pinctrl-0 = <&dp_hpd>; + pinctrl-names = "default"; + power-domains = <&pd_disp1>; + + samsung,color-space = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; + }; |