diff options
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/i2c-designware.txt')
-rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-designware.txt | 73 |
1 files changed, 0 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt deleted file mode 100644 index 08be4d3846e5..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Synopsys DesignWare I2C - -Required properties : - - - compatible : should be "snps,designware-i2c" - or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback - - reg : Offset and length of the register set for the device - - interrupts : <IRQ> where IRQ is the interrupt number. - - clocks : phandles for the clocks, see the description of clock-names below. - The phandle for the "ic_clk" clock is required. The phandle for the "pclk" - clock is optional. If a single clock is specified but no clock-name, it is - the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first. - -Recommended properties : - - - clock-frequency : desired I2C bus clock frequency in Hz. - -Optional properties : - - - clock-names : Contains the names of the clocks: - "ic_clk", for the core clock used to generate the external I2C clock. - "pclk", the interface clock, required for register access. - - - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold - time, named ICPU_CFG:TWI_DELAY in the datasheet. - - - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. - This option is only supported in hardware blocks version 1.11a or newer and - on Microsemi SoCs ("mscc,ocelot-i2c" compatible). - - - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds. - This value which is by default 300ns is used to compute the tLOW period. - - - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds. - This value which is by default 300ns is used to compute the tHIGH period. - -Examples : - - i2c@f0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xf0000 0x1000>; - interrupts = <11>; - clock-frequency = <400000>; - }; - - i2c@1120000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0x1120000 0x1000>; - interrupt-parent = <&ictl>; - interrupts = <12 1>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <300>; - i2c-scl-falling-time-ns = <300>; - }; - - i2c@1120000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x2000 0x100>; - clock-frequency = <400000>; - clocks = <&i2cclk>; - interrupts = <0>; - - eeprom@64 { - compatible = "linux,slave-24c02"; - reg = <0x40000064>; - }; - }; |