1 files changed, 112 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml
new file mode 100644
index 000000000000..b08081bc018b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sprd,sdhci-r11.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sprd,sdhci-r11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SDHCI controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,sdhci-r11
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SDIO source clock
+      - description: gate clock for enabling/disabling the device
+      - description: gate clock controlling the device for some special platforms (optional)
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sdio
+      - const: enable
+      - const: 2x_enable
+
+  pinctrl-0:
+    description: default/high speed pin control
+    maxItems: 1
+
+  pinctrl-1:
+    description: UHS mode pin control
+    maxItems: 1
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: state_uhs
+
+patternProperties:
+  "^sprd,phy-delay-(legacy|mmc-(ddr52|highspeed|hs[24]00|hs400es)|sd-(highspeed|uhs-sdr(50|104)))$":
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: clock data write line delay value
+      - description: clock read command line delay value
+      - description: clock read data positive edge delay value
+      - description: clock read data negative edge delay value
+    description:
+      PHY DLL delays are used to delay the data valid window, and align
+      the window to the sampling clock. Each cell's delay value unit is
+      cycle of the PHY clock.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@50430000 {
+      compatible = "sprd,sdhci-r11";
+      reg = <0x50430000 0x1000>;
+      interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&aon_prediv CLK_EMMC_2X>,
+               <&apahb_gate CLK_EMMC_EB>,
+               <&aon_gate CLK_EMMC_2X_EN>;
+      clock-names = "sdio", "enable", "2x_enable";
+
+      pinctrl-0 = <&sd0_pins_default>;
+      pinctrl-1 = <&sd0_pins_uhs>;
+      pinctrl-names = "default", "state_uhs";
+
+      bus-width = <8>;
+      cap-mmc-hw-reset;
+      mmc-hs400-enhanced-strobe;
+      mmc-hs400-1_8v;
+      mmc-hs200-1_8v;
+      mmc-ddr-1_8v;
+      non-removable;
+      no-sdio;
+      no-sd;
+
+      sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+      sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+      sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+      sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+    };
+...