1 files changed, 0 insertions, 65 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
deleted file mode 100644
index 30a79da9c039..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-ARM Freescale DSPI controller
-
-Required properties:
-- compatible : must be one of:
-	"fsl,vf610-dspi",
-	"fsl,ls1021a-v1.0-dspi",
-	"fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1028a-dspi",
-	"fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
-	"fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
-	"fsl,ls2085a-dspi",
-	"fsl,lx2160a-dspi",
-- reg : Offset and length of the register set for the device
-- interrupts : Should contain SPI controller interrupt
-- clocks: from common clock binding: handle to dspi clock.
-- clock-names: from common clock binding: Shall be "dspi".
-- pinctrl-0: pin control group to be used for this controller.
-- pinctrl-names: must contain a "default" entry.
-- spi-num-chipselects : the number of the chipselect signals.
-
-Optional property:
-- big-endian: If present the dspi device's registers are implemented
-  in big endian mode.
-- bus-num : the slave chip chipselect signal number.
-
-Optional SPI slave node properties:
-- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip
-  select and the start of clock signal, at the start of a transfer.
-- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock
-  signal and deactivating chip select, at the end of a transfer.
-
-Example:
-
-dspi0@4002c000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,vf610-dspi";
-	reg = <0x4002c000 0x1000>;
-	interrupts = <0 67 0x04>;
-	clocks = <&clks VF610_CLK_DSPI0>;
-	clock-names = "dspi";
-	spi-num-chipselects = <5>;
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0_1>;
-	big-endian;
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-		linux,modalias = "m25p80";
-		modal = "at26df081a";
-		fsl,spi-cs-sck-delay = <100>;
-		fsl,spi-sck-cs-delay = <50>;
-	};
-};
-
-