diff options
Diffstat (limited to 'Documentation/virt/kvm/x86/amd-memory-encryption.rst')
| -rw-r--r-- | Documentation/virt/kvm/x86/amd-memory-encryption.rst | 169 |
1 files changed, 165 insertions, 4 deletions
diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst index 84335d119ff1..1ddb6a86ce7f 100644 --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst @@ -76,15 +76,56 @@ are defined in ``<linux/psp-dev.h>``. KVM implements the following commands to support common lifecycle events of SEV guests, such as launching, running, snapshotting, migrating and decommissioning. -1. KVM_SEV_INIT ---------------- +1. KVM_SEV_INIT2 +---------------- -The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform +The KVM_SEV_INIT2 command is used by the hypervisor to initialize the SEV platform context. In a typical workflow, this command should be the first command issued. +For this command to be accepted, either KVM_X86_SEV_VM or KVM_X86_SEV_ES_VM +must have been passed to the KVM_CREATE_VM ioctl. A virtual machine created +with those machine types in turn cannot be run until KVM_SEV_INIT2 is invoked. + +Parameters: struct kvm_sev_init (in) Returns: 0 on success, -negative on error +:: + + struct kvm_sev_init { + __u64 vmsa_features; /* initial value of features field in VMSA */ + __u32 flags; /* must be 0 */ + __u16 ghcb_version; /* maximum guest GHCB version allowed */ + __u16 pad1; + __u32 pad2[8]; + }; + +It is an error if the hypervisor does not support any of the bits that +are set in ``flags`` or ``vmsa_features``. ``vmsa_features`` must be +0 for SEV virtual machines, as they do not have a VMSA. + +``ghcb_version`` must be 0 for SEV virtual machines, as they do not issue GHCB +requests. If ``ghcb_version`` is 0 for any other guest type, then the maximum +allowed guest GHCB protocol will default to version 2. + +This command replaces the deprecated KVM_SEV_INIT and KVM_SEV_ES_INIT commands. +The commands did not have any parameters (the ```data``` field was unused) and +only work for the KVM_X86_DEFAULT_VM machine type (0). + +They behave as if: + +* the VM type is KVM_X86_SEV_VM for KVM_SEV_INIT, or KVM_X86_SEV_ES_VM for + KVM_SEV_ES_INIT + +* the ``flags`` and ``vmsa_features`` fields of ``struct kvm_sev_init`` are + set to zero, and ``ghcb_version`` is set to 0 for KVM_SEV_INIT and 1 for + KVM_SEV_ES_INIT. + +If the ``KVM_X86_SEV_VMSA_FEATURES`` attribute does not exist, the hypervisor only +supports KVM_SEV_INIT and KVM_SEV_ES_INIT. In that case, note that KVM_SEV_ES_INIT +might set the debug swap VMSA feature (bit 5) depending on the value of the +``debug_swap`` parameter of ``kvm-amd.ko``. + 2. KVM_SEV_LAUNCH_START ----------------------- @@ -425,6 +466,124 @@ issued by the hypervisor to make the guest ready for execution. Returns: 0 on success, -negative on error +18. KVM_SEV_SNP_LAUNCH_START +---------------------------- + +The KVM_SNP_LAUNCH_START command is used for creating the memory encryption +context for the SEV-SNP guest. It must be called prior to issuing +KVM_SEV_SNP_LAUNCH_UPDATE or KVM_SEV_SNP_LAUNCH_FINISH; + +Parameters (in): struct kvm_sev_snp_launch_start + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_start { + __u64 policy; /* Guest policy to use. */ + __u8 gosvw[16]; /* Guest OS visible workarounds. */ + __u16 flags; /* Must be zero. */ + __u8 pad0[6]; + __u64 pad1[4]; + }; + +See SNP_LAUNCH_START in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_start``. + +19. KVM_SEV_SNP_LAUNCH_UPDATE +----------------------------- + +The KVM_SEV_SNP_LAUNCH_UPDATE command is used for loading userspace-provided +data into a guest GPA range, measuring the contents into the SNP guest context +created by KVM_SEV_SNP_LAUNCH_START, and then encrypting/validating that GPA +range so that it will be immediately readable using the encryption key +associated with the guest context once it is booted, after which point it can +attest the measurement associated with its context before unlocking any +secrets. + +It is required that the GPA ranges initialized by this command have had the +KVM_MEMORY_ATTRIBUTE_PRIVATE attribute set in advance. See the documentation +for KVM_SET_MEMORY_ATTRIBUTES for more details on this aspect. + +Upon success, this command is not guaranteed to have processed the entire +range requested. Instead, the ``gfn_start``, ``uaddr``, and ``len`` fields of +``struct kvm_sev_snp_launch_update`` will be updated to correspond to the +remaining range that has yet to be processed. The caller should continue +calling this command until those fields indicate the entire range has been +processed, e.g. ``len`` is 0, ``gfn_start`` is equal to the last GFN in the +range plus 1, and ``uaddr`` is the last byte of the userspace-provided source +buffer address plus 1. In the case where ``type`` is KVM_SEV_SNP_PAGE_TYPE_ZERO, +``uaddr`` will be ignored completely. + +Parameters (in): struct kvm_sev_snp_launch_update + +Returns: 0 on success, < 0 on error, -EAGAIN if caller should retry + +:: + + struct kvm_sev_snp_launch_update { + __u64 gfn_start; /* Guest page number to load/encrypt data into. */ + __u64 uaddr; /* Userspace address of data to be loaded/encrypted. */ + __u64 len; /* 4k-aligned length in bytes to copy into guest memory.*/ + __u8 type; /* The type of the guest pages being initialized. */ + __u8 pad0; + __u16 flags; /* Must be zero. */ + __u32 pad1; + __u64 pad2[4]; + + }; + +where the allowed values for page_type are #define'd as:: + + KVM_SEV_SNP_PAGE_TYPE_NORMAL + KVM_SEV_SNP_PAGE_TYPE_ZERO + KVM_SEV_SNP_PAGE_TYPE_UNMEASURED + KVM_SEV_SNP_PAGE_TYPE_SECRETS + KVM_SEV_SNP_PAGE_TYPE_CPUID + +See the SEV-SNP spec [snp-fw-abi]_ for further details on how each page type is +used/measured. + +20. KVM_SEV_SNP_LAUNCH_FINISH +----------------------------- + +After completion of the SNP guest launch flow, the KVM_SEV_SNP_LAUNCH_FINISH +command can be issued to make the guest ready for execution. + +Parameters (in): struct kvm_sev_snp_launch_finish + +Returns: 0 on success, -negative on error + +:: + + struct kvm_sev_snp_launch_finish { + __u64 id_block_uaddr; + __u64 id_auth_uaddr; + __u8 id_block_en; + __u8 auth_key_en; + __u8 vcek_disabled; + __u8 host_data[32]; + __u8 pad0[3]; + __u16 flags; /* Must be zero */ + __u64 pad1[4]; + }; + + +See SNP_LAUNCH_FINISH in the SEV-SNP specification [snp-fw-abi]_ for further +details on the input parameters in ``struct kvm_sev_snp_launch_finish``. + +Device attribute API +==================== + +Attributes of the SEV implementation can be retrieved through the +``KVM_HAS_DEVICE_ATTR`` and ``KVM_GET_DEVICE_ATTR`` ioctls on the ``/dev/kvm`` +device node, using group ``KVM_X86_GRP_SEV``. + +Currently only one attribute is implemented: + +* ``KVM_X86_SEV_VMSA_FEATURES``: return the set of all bits that + are accepted in the ``vmsa_features`` of ``KVM_SEV_INIT2``. + Firmware Management =================== @@ -444,9 +603,11 @@ References ========== -See [white-paper]_, [api-spec]_, [amd-apm]_ and [kvm-forum]_ for more info. +See [white-paper]_, [api-spec]_, [amd-apm]_, [kvm-forum]_, and [snp-fw-abi]_ +for more info. .. [white-paper] https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf .. [api-spec] https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf .. [amd-apm] https://support.amd.com/TechDocs/24593.pdf (section 15.34) .. [kvm-forum] https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf +.. [snp-fw-abi] https://www.amd.com/system/files/TechDocs/56860.pdf |