diff options
Diffstat (limited to 'Documentation')
18 files changed, 853 insertions, 64 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 2e6d5ebfd3c7..7cee78ad4108 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -243,7 +243,8 @@ Description: less measurements. Units after application of scale and offset are milli degrees Celsius. -What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_input +What: /sys/bus/iio/devices/iio:deviceX/in_temp_input KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ad9739a b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a new file mode 100644 index 000000000000..ed59299e6f8d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-ad9739a @@ -0,0 +1,19 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode +KernelVersion: 6.9 +Contact: linux-iio@vger.kernel.org +Description: + DAC operating mode. One of the following modes can be selected: + + * normal: This is DAC normal mode. + * mixed-mode: In this mode the output is effectively chopped at + the DAC sample rate. This has the effect of + reducing the power of the fundamental signal while + increasing the power of the images centered around + the DAC sample rate, thus improving the output + power of these images. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode_available +KernelVersion: 6.9 +Contact: linux-iio@vger.kernel.org +Description: + Available operating modes. diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index 07cacc3f6a97..280ed479ef5a 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -32,6 +32,8 @@ properties: spi-cpol: true + spi-3wire: true + interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml new file mode 100644 index 000000000000..ea6cfcd0aff4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7173 ADC + +maintainers: + - Ceclan Dumitru <dumitru.ceclan@analog.com> + +description: | + Analog Devices AD717x ADC's: + The AD717x family offer a complete integrated Sigma-Delta ADC solution which + can be used in high precision, low noise single channel applications + (Life Science measurements) or higher speed multiplexed applications + (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended + primarily for measurement of signals close to DC but also delivers + outstanding performance with input bandwidths out to ~10kHz. + + Datasheets for supported chips: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf + +properties: + compatible: + enum: + - adi,ad7172-2 + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-2 + - adi,ad7175-8 + - adi,ad7176-2 + - adi,ad7177-2 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: | + Ready: multiplexed with SPI data out. While SPI CS is low, + can be used to indicate the completion of a conversion. + + - description: | + Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR, + and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin. + Therefore, the ERROR pin indicates that an error has occurred. + + interrupt-names: + minItems: 1 + items: + - const: rdy + - const: err + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + spi-max-frequency: + maximum: 20000000 + + gpio-controller: + description: Marks the device node as a GPIO controller. + + '#gpio-cells': + const: 2 + description: + The first cell is the GPIO number and the second cell specifies + GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. + + vref-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref) specified here must be the voltage difference between the + REF+ and REF- pins: Vref = (REF+) - (REF-). + + vref2-supply: + description: | + Differential external reference supply used for conversion. The reference + voltage (Vref2) specified here must be the voltage difference between the + REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-). + + avdd-supply: + description: Avdd supply, can be used as reference for conversion. + This supply is referenced to AVSS, voltage specified here + represents (AVDD1 - AVSS). + + avdd2-supply: + description: Avdd2 supply, used as the input to the internal voltage regulator. + This supply is referenced to AVSS, voltage specified here + represents (AVDD2 - AVSS). + + iovdd-supply: + description: iovdd supply, used for the chip digital interface. + + clocks: + maxItems: 1 + description: | + Optional external clock source. Can include one clock source: external + clock or external crystal. + + clock-names: + enum: + - ext-clk + - xtal + + '#clock-cells': + const: 0 + +patternProperties: + "^channel@[0-9a-f]$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + minimum: 0 + maximum: 15 + + diff-channels: + items: + minimum: 0 + maximum: 31 + + adi,reference-select: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + vref : REF+ /REF− + vref2 : REF2+ /REF2− + refout-avss: REFOUT/AVSS (Internal reference) + avdd : AVDD /AVSS + + External reference ref2 only available on ad7173-8 and ad7172-4. + Internal reference refout-avss not available on ad7172-4. + + If not specified, internal reference used (if available). + $ref: /schemas/types.yaml#/definitions/string + enum: + - vref + - vref2 + - refout-avss + - avdd + default: refout-avss + + required: + - reg + - diff-channels + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + # Only ad7172-4, ad7173-8 and ad7175-8 support vref2 + # Other models have [0-3] channel registers + - if: + properties: + compatible: + not: + contains: + enum: + - adi,ad7172-4 + - adi,ad7173-8 + - adi,ad7175-8 + then: + properties: + vref2-supply: false + patternProperties: + "^channel@[0-9a-f]$": + properties: + adi,reference-select: + enum: + - vref + - refout-avss + - avdd + reg: + maximum: 3 + + # Model ad7172-4 does not support internal reference + - if: + properties: + compatible: + contains: + const: adi,ad7172-4 + then: + patternProperties: + "^channel@[0-9a-f]$": + properties: + reg: + maximum: 7 + adi,reference-select: + enum: + - vref + - vref2 + - avdd + required: + - adi,reference-select + + - if: + anyOf: + - required: [clock-names] + - required: [clocks] + then: + properties: + '#clock-cells': false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7173-8"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "rdy"; + interrupt-parent = <&gpio>; + spi-max-frequency = <5000000>; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <0>; + + vref-supply = <&dummy_regulator>; + + channel@0 { + reg = <0>; + bipolar; + diff-channels = <0 1>; + adi,reference-select = "vref"; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + }; + + channel@2 { + reg = <2>; + bipolar; + diff-channels = <4 5>; + }; + + channel@3 { + reg = <3>; + bipolar; + diff-channels = <6 7>; + }; + + channel@4 { + reg = <4>; + diff-channels = <8 9>; + adi,reference-select = "avdd"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml new file mode 100644 index 000000000000..d17d184842d3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml @@ -0,0 +1,213 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices PulSAR LFCSP Analog to Digital Converters + +maintainers: + - Michael Hennerich <Michael.Hennerich@analog.com> + - Nuno Sá <nuno.sa@analog.com> + +description: | + A family of pin-compatible single channel differential analog to digital + converters with SPI support in a LFCSP package. + + * https://www.analog.com/en/products/ad7944.html + * https://www.analog.com/en/products/ad7985.html + * https://www.analog.com/en/products/ad7986.html + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - adi,ad7944 + - adi,ad7985 + - adi,ad7986 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 111111111 + + spi-cpol: true + spi-cpha: true + + adi,spi-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [ single, chain ] + description: | + This property indicates the SPI wiring configuration. + + When this property is omitted, it is assumed that the device is using what + the datasheet calls "4-wire mode". This is the conventional SPI mode used + when there are multiple devices on the same bus. In this mode, the CNV + line is used to initiate the conversion and the SDI line is connected to + CS on the SPI controller. + + When this property is present, it indicates that the device is using one + of the following alternative wiring configurations: + + * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's + definition of 3-wire mode is NOT at all related to the standard + spi-3wire property!) This mode is often used when the ADC is the only + device on the bus. In this mode, SDI is tied to VIO, and the CNV line + can be connected to the CS line of the SPI controller or to a GPIO, in + which case the CS line of the controller is unused. + * chain: The datasheet calls this "chain mode". This mode is used to save + on wiring when multiple ADCs are used. In this mode, the SDI line of + one chip is tied to the SDO of the next chip in the chain and the SDI of + the last chip in the chain is tied to GND. Only the first chip in the + chain is connected to the SPI bus. The CNV line of all chips are tied + together. The CS line of the SPI controller can be used as the CNV line + only if it is active high. + + '#daisy-chained-devices': true + + avdd-supply: + description: A 2.5V supply that powers the analog circuitry. + + dvdd-supply: + description: A 2.5V supply that powers the digital circuitry. + + vio-supply: + description: + A 1.8V to 2.7V supply for the digital inputs and outputs. + + bvdd-supply: + description: + A voltage supply for the buffered power. When using an external reference + without an internal buffer (PDREF high, REFIN low), this should be + connected to the same supply as ref-supply. Otherwise, when using an + internal reference or an external reference with an internal buffer, this + is connected to a 5V supply. + + ref-supply: + description: + Voltage regulator for the external reference voltage (REF). This property + is omitted when using an internal reference. + + refin-supply: + description: + Voltage regulator for the reference buffer input (REFIN). When using an + external buffer with internal reference, this should be connected to a + 1.2V external reference voltage supply. Otherwise, this property is + omitted. + + cnv-gpios: + description: + The Convert Input (CNV). This input has multiple functions. It initiates + the conversions and selects the SPI mode of the device (chain or CS). In + 'single' mode, this property is omitted if the CNV pin is connected to the + CS line of the SPI controller. + maxItems: 1 + + turbo-gpios: + description: + GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO + line is hard-wired and the state is determined by the adi,always-turbo + property. + maxItems: 1 + + adi,always-turbo: + type: boolean + description: + When present, this property indicates that the TURBO line is hard-wired + and the state is always high. If neither this property nor turbo-gpios is + present, the TURBO line is assumed to be hard-wired and the state is + always low. + + interrupts: + description: + The SDO pin can also function as a busy indicator. This node should be + connected to an interrupt that is triggered when the SDO line goes low + while the SDI line is high and the CNV line is low ('single' mode) or the + SDI line is low and the CNV line is high ('multi' mode); or when the SDO + line goes high while the SDI and CNV lines are high (chain mode), + maxItems: 1 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - vio-supply + - bvdd-supply + +allOf: + # ref-supply and refin-supply are mutually exclusive (neither is also valid) + - if: + required: + - ref-supply + then: + properties: + refin-supply: false + - if: + required: + - refin-supply + then: + properties: + ref-supply: false + # in '4-wire' mode, cnv-gpios is required, for other modes it is optional + - if: + not: + required: + - adi,spi-mode + then: + required: + - cnv-gpios + # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled + - if: + required: + - adi,spi-mode + properties: + adi,spi-mode: + const: chain + then: + properties: + spi-max-frequency: + maximum: 90909090 + adi,always-turbo: false + required: + - '#daisy-chained-devices' + else: + properties: + '#daisy-chained-devices': false + # turbo-gpios and adi,always-turbo are mutually exclusive + - if: + required: + - turbo-gpios + then: + properties: + adi,always-turbo: false + - if: + required: + - adi,always-turbo + then: + properties: + turbo-gpios: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "adi,ad7944"; + reg = <0>; + spi-cpha; + spi-max-frequency = <111111111>; + avdd-supply = <&supply_2_5V>; + dvdd-supply = <&supply_2_5V>; + vio-supply = <&supply_1_8V>; + bvdd-supply = <&supply_5V>; + cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml index 7ef46c90ebc8..da605a051b94 100644 --- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -11,8 +11,13 @@ maintainers: properties: compatible: - enum: - - allwinner,sun20i-d1-gpadc + oneOf: + - enum: + - allwinner,sun20i-d1-gpadc + - items: + - enum: + - allwinner,sun50i-h616-gpadc + - const: allwinner,sun20i-d1-gpadc "#io-channel-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml new file mode 100644 index 000000000000..c0b36476113a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD9739A RF DAC + +maintainers: + - Dragos Bogdan <dragos.bogdan@analog.com> + - Nuno Sa <nuno.sa@analog.com> + +description: | + The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable + of synthesizing wideband signals from dc up to 3 GHz. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf + +properties: + compatible: + enum: + - adi,ad9739a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-3p3-supply: + description: 3.3V Digital input supply. + + vdd-supply: + description: 1.8V Digital input supply. + + vdda-supply: + description: 3.3V Analog input supply. + + vddc-supply: + description: 1.8V Clock input supply. + + vref-supply: + description: Input/Output reference supply. + + io-backends: + maxItems: 1 + + adi,full-scale-microamp: + description: This property represents the DAC full scale current. + minimum: 8580 + maximum: 31700 + default: 20000 + +required: + - compatible + - reg + - clocks + - io-backends + - vdd-3p3-supply + - vdd-supply + - vdda-supply + - vddc-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad9739a"; + reg = <0>; + + clocks = <&dac_clk>; + + io-backends = <&iio_backend>; + + vdd-3p3-supply = <&vdd_3_3>; + vdd-supply = <&vdd>; + vdda-supply = <&vdd_3_3>; + vddc-supply = <&vdd>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml new file mode 100644 index 000000000000..a55e9bfc66d7 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AXI DAC IP core + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +description: | + Analog Devices Generic AXI DAC IP core for interfacing a DAC device + with a high speed serial (JESD204B/C) or source synchronous parallel + interface (LVDS/CMOS). + Usually, some other interface type (i.e SPI) is used as a control + interface for the actual DAC, while this IP core will interface + to the data-lines of the DAC and handle the streaming of data from + memory via DMA into the DAC. + + https://wiki.analog.com/resources/fpga/docs/axi_dac_ip + +properties: + compatible: + enum: + - adi,axi-dac-9.1.b + + reg: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: tx + + clocks: + maxItems: 1 + + '#io-backend-cells': + const: 0 + +required: + - compatible + - dmas + - reg + - clocks + +additionalProperties: false + +examples: + - | + dac@44a00000 { + compatible = "adi,axi-dac-9.1.b"; + reg = <0x44a00000 0x10000>; + dmas = <&tx_dma 0>; + dma-names = "tx"; + #io-backend-cells = <0>; + clocks = <&axi_clk>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml index 79da0323c327..e59db861e2eb 100644 --- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml @@ -21,6 +21,7 @@ properties: - ti,dac5573 - ti,dac6573 - ti,dac7573 + - ti,dac081c081 - ti,dac121c081 reg: diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml index c13c10c8d65d..a0fe0a818d86 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml @@ -4,16 +4,20 @@ $id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor +title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> properties: compatible: - enum: - - maxim,max30102 - - maxim,max30105 + oneOf: + - enum: + - maxim,max30102 + - maxim,max30105 + - items: + - const: maxim,max30101 + - const: maxim,max30105 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml index 8b5dedd1a598..b375d307513f 100644 --- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -34,6 +34,9 @@ properties: reg: maxItems: 1 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -43,6 +46,7 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; @@ -54,5 +58,6 @@ examples: vdd-supply = <&vcc_3v3>; interrupt-parent = <&gpio3>; interrupts = <23 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml index 7cd05bcbee31..5e0bed2c45de 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml @@ -32,6 +32,7 @@ properties: - invensense,icm42605 - invensense,icm42622 - invensense,icm42631 + - invensense,icm42688 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 297b8a1a7ffb..587ff2bced2d 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -62,14 +62,15 @@ properties: allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: - not: - properties: - compatible: - contains: - enum: - - invensense,mpu9150 - - invensense,mpu9250 - - invensense,mpu9255 + properties: + compatible: + contains: + enum: + - invensense,iam20680 + - invensense,icm20602 + - invensense,icm20608 + - invensense,icm20609 + - invensense,icm20689 then: properties: i2c-gate: false diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml index 206af44f2c43..b750096530bc 100644 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml +++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml @@ -4,17 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Avago APDS9300 ambient light sensor +title: Avago Gesture/RGB/ALS/Proximity sensors maintainers: - - Jonathan Cameron <jic23@kernel.org> + - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com> description: | - Datasheet at https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-1077EN + Datasheet: https://www.avagotech.com/docs/AV02-4191EN + Datasheet: https://www.avagotech.com/docs/AV02-4755EN properties: compatible: - const: avago,apds9300 + enum: + - avago,apds9300 + - avago,apds9306 + - avago,apds9960 reg: maxItems: 1 @@ -22,6 +27,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + additionalProperties: false required: @@ -30,6 +37,8 @@ required: examples: - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { #address-cells = <1>; #size-cells = <0>; @@ -38,7 +47,8 @@ examples: compatible = "avago,apds9300"; reg = <0x39>; interrupt-parent = <&gpio2>; - interrupts = <29 8>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®ulator_3v3>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml deleted file mode 100644 index f06e0fda5629..000000000000 --- a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Avago APDS9960 gesture/RGB/ALS/proximity sensor - -maintainers: - - Matt Ranostay <matt.ranostay@konsulko.com> - -description: | - Datasheet at https://www.avagotech.com/docs/AV02-4191EN - -properties: - compatible: - const: avago,apds9960 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - -additionalProperties: false - -required: - - compatible - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - light-sensor@39 { - compatible = "avago,apds9960"; - reg = <0x39>; - interrupt-parent = <&gpio1>; - interrupts = <16 1>; - }; - }; -... diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index dbb85135fd66..312febeeb3bb 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -57,6 +57,8 @@ properties: interrupts: maxItems: 1 + vdd-supply: true + adi,mux-delay-config-us: description: | Extra delay prior to each conversion, in addition to the internal 1ms @@ -460,6 +462,7 @@ required: - compatible - reg - interrupts + - vdd-supply additionalProperties: false @@ -489,6 +492,7 @@ examples: #address-cells = <1>; #size-cells = <0>; + vdd-supply = <&supply>; interrupts = <20 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; diff --git a/Documentation/iio/ad7944.rst b/Documentation/iio/ad7944.rst new file mode 100644 index 000000000000..f418ab1288ae --- /dev/null +++ b/Documentation/iio/ad7944.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +============= +AD7944 driver +============= + +ADC driver for Analog Devices Inc. AD7944 and similar devices. The module name +is ``ad7944``. + + +Supported devices +================= + +The following chips are supported by this driver: + +* `AD7944 <https://www.analog.com/AD7944>`_ +* `AD7985 <https://www.analog.com/AD7985>`_ +* `AD7986 <https://www.analog.com/AD7986>`_ + + +Supported features +================== + +SPI wiring modes +---------------- + +The driver currently supports two of the many possible SPI wiring configurations. + +CS mode, 3-wire, without busy indicator +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +-------------+ + +--------------------| CS | + v | | + VIO +--------------------+ | HOST | + | | CNV | | | + +--->| SDI AD7944 SDO |-------->| SDI | + | SCK | | | + +--------------------+ | | + ^ | | + +--------------------| SCLK | + +-------------+ + +To select this mode in the device tree, set the ``adi,spi-mode`` property to +``"single"`` and omit the ``cnv-gpios`` property. + +CS mode, 4-wire, without busy indicator +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +.. code-block:: + + +-------------+ + +-----------------------------------| CS | + | | | + | +--------------------| GPIO | + | v | | + | +--------------------+ | HOST | + | | CNV | | | + +--->| SDI AD7944 SDO |-------->| SDI | + | SCK | | | + +--------------------+ | | + ^ | | + +--------------------| SCLK | + +-------------+ + +To select this mode in the device tree, omit the ``adi,spi-mode`` property and +provide the ``cnv-gpios`` property. + +Reference voltage +----------------- + +All 3 possible reference voltage sources are supported: + +- Internal reference +- External 1.2V reference and internal buffer +- External reference + +The source is determined by the device tree. If ``ref-supply`` is present, then +the external reference is used. If ``refin-supply`` is present, then the internal +buffer is used. If neither is present, then the internal reference is used. + +Unimplemented features +---------------------- + +- ``BUSY`` indication +- ``TURBO`` mode +- Daisy chain mode + + +Device attributes +================= + +There are two types of ADCs in this family, pseudo-differential and fully +differential. The channel name is different depending on the type of ADC. + +Pseudo-differential ADCs +------------------------ + +AD7944 and AD7985 are pseudo-differential ADCs and have the following attributes: + ++---------------------------------------+--------------------------------------------------------------+ +| Attribute | Description | ++=======================================+==============================================================+ +| ``in_voltage0_raw`` | Raw ADC voltage value (*IN+* referenced to ground sense). | ++---------------------------------------+--------------------------------------------------------------+ +| ``in_voltage0_scale`` | Scale factor to convert raw value to mV. | ++---------------------------------------+--------------------------------------------------------------+ + +Fully-differential ADCs +----------------------- + +AD7986 is a fully-differential ADC and has the following attributes: + ++---------------------------------------+--------------------------------------------------------------+ +| Attribute | Description | ++=======================================+==============================================================+ +| ``in_voltage0-voltage1_raw`` | Raw ADC voltage value (*IN+* - *IN-*). | ++---------------------------------------+--------------------------------------------------------------+ +| ``in_voltage0-voltage1_scale`` | Scale factor to convert raw value to mV. | ++---------------------------------------+--------------------------------------------------------------+ + + +Device buffers +============== + +This driver supports IIO triggered buffers. + +See :doc:`iio_devbuf` for more information. diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst index 30b09eefe75e..fb6f9d743211 100644 --- a/Documentation/iio/index.rst +++ b/Documentation/iio/index.rst @@ -16,6 +16,7 @@ Industrial I/O Kernel Drivers .. toctree:: :maxdepth: 1 + ad7944 adis16475 bno055 ep93xx_adc |